Commit 3cc6e44b authored by David S. Miller's avatar David S. Miller

Merge branch 'net-phy-Add-AST2600-MDIO-support'

Andrew Jeffery says:

====================
net: phy: Add AST2600 MDIO support

v2 of the ASPEED MDIO series addresses comments from Rob on the devicetree
bindings and Andrew on the driver itself.

v1 of the series can be found here:

http://patchwork.ozlabs.org/cover/1138140/
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 7c5b4205 82f151de
# SPDX-License-Identifier: GPL-2.0-or-later
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/aspeed,ast2600-mdio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ASPEED AST2600 MDIO Controller
maintainers:
- Andrew Jeffery <andrew@aj.id.au>
description: |+
The ASPEED AST2600 MDIO controller is the third iteration of ASPEED's MDIO
bus register interface, this time also separating out the controller from the
MAC.
allOf:
- $ref: "mdio.yaml#"
properties:
compatible:
const: aspeed,ast2600-mdio
reg:
maxItems: 1
description: The register range of the MDIO controller instance
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
examples:
- |
mdio0: mdio@1e650000 {
compatible = "aspeed,ast2600-mdio";
reg = <0x1e650000 0x8>;
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
......@@ -32,6 +32,7 @@ config FTGMAC100
depends on ARM || NDS32 || COMPILE_TEST
depends on !64BIT || BROKEN
select PHYLIB
select MDIO_ASPEED if MACH_ASPEED_G6
---help---
This driver supports the FTGMAC100 Gigabit Ethernet controller
from Faraday. It is used on Faraday A369, Andes AG102 and some
......
......@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/of.h>
#include <linux/of_mdio.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/property.h>
......@@ -1619,8 +1620,13 @@ static int ftgmac100_setup_mdio(struct net_device *netdev)
if (!priv->mii_bus)
return -EIO;
if (priv->is_aspeed) {
/* This driver supports the old MDIO interface */
if (of_device_is_compatible(np, "aspeed,ast2400-mac") ||
of_device_is_compatible(np, "aspeed,ast2500-mac")) {
/* The AST2600 has a separate MDIO controller */
/* For the AST2400 and AST2500 this driver only supports the
* old MDIO interface
*/
reg = ioread32(priv->base + FTGMAC100_OFFSET_REVR);
reg &= ~FTGMAC100_REVR_NEW_MDIO_INTERFACE;
iowrite32(reg, priv->base + FTGMAC100_OFFSET_REVR);
......@@ -1797,7 +1803,8 @@ static int ftgmac100_probe(struct platform_device *pdev)
np = pdev->dev.of_node;
if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac") ||
of_device_is_compatible(np, "aspeed,ast2500-mac"))) {
of_device_is_compatible(np, "aspeed,ast2500-mac") ||
of_device_is_compatible(np, "aspeed,ast2600-mac"))) {
priv->rxdes0_edorr_mask = BIT(30);
priv->txdes0_edotr_mask = BIT(30);
priv->is_aspeed = true;
......@@ -1817,7 +1824,29 @@ static int ftgmac100_probe(struct platform_device *pdev)
priv->ndev = ncsi_register_dev(netdev, ftgmac100_ncsi_handler);
if (!priv->ndev)
goto err_ncsi_dev;
} else {
} else if (np && of_get_property(np, "phy-handle", NULL)) {
struct phy_device *phy;
phy = of_phy_get_and_connect(priv->netdev, np,
&ftgmac100_adjust_link);
if (!phy) {
dev_err(&pdev->dev, "Failed to connect to phy\n");
goto err_setup_mdio;
}
/* Indicate that we support PAUSE frames (see comment in
* Documentation/networking/phy.txt)
*/
phy_support_asym_pause(phy);
/* Display what we found */
phy_attached_info(phy);
} else if (np && !of_get_child_by_name(np, "mdio")) {
/* Support legacy ASPEED devicetree descriptions that decribe a
* MAC with an embedded MDIO controller but have no "mdio"
* child node. Automatically scan the MDIO bus for available
* PHYs.
*/
priv->use_ncsi = false;
err = ftgmac100_setup_mdio(netdev);
if (err)
......
......@@ -21,6 +21,19 @@ config MDIO_BUS
if MDIO_BUS
config MDIO_ASPEED
tristate "ASPEED MDIO bus controller"
depends on ARCH_ASPEED || COMPILE_TEST
depends on OF_MDIO && HAS_IOMEM
help
This module provides a driver for the independent MDIO bus
controllers found in the ASPEED AST2600 SoC. This is a driver for the
third revision of the ASPEED MDIO register interface - the first two
revisions are the "old" and "new" interfaces found in the AST2400 and
AST2500, embedded in the MAC. For legacy reasons, FTGMAC100 driver
continues to drive the embedded MDIO controller for the AST2400 and
AST2500 SoCs, so say N if AST2600 support is not required.
config MDIO_BCM_IPROC
tristate "Broadcom iProc MDIO bus controller"
depends on ARCH_BCM_IPROC || COMPILE_TEST
......
......@@ -22,6 +22,7 @@ libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o
obj-$(CONFIG_PHYLINK) += phylink.o
obj-$(CONFIG_PHYLIB) += libphy.o
obj-$(CONFIG_MDIO_ASPEED) += mdio-aspeed.o
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
......
// SPDX-License-Identifier: GPL-2.0-or-later
/* Copyright (C) 2019 IBM Corp. */
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/iopoll.h>
#include <linux/mdio.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_mdio.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#define DRV_NAME "mdio-aspeed"
#define ASPEED_MDIO_CTRL 0x0
#define ASPEED_MDIO_CTRL_FIRE BIT(31)
#define ASPEED_MDIO_CTRL_ST BIT(28)
#define ASPEED_MDIO_CTRL_ST_C45 0
#define ASPEED_MDIO_CTRL_ST_C22 1
#define ASPEED_MDIO_CTRL_OP GENMASK(27, 26)
#define MDIO_C22_OP_WRITE 0b01
#define MDIO_C22_OP_READ 0b10
#define ASPEED_MDIO_CTRL_PHYAD GENMASK(25, 21)
#define ASPEED_MDIO_CTRL_REGAD GENMASK(20, 16)
#define ASPEED_MDIO_CTRL_MIIWDATA GENMASK(15, 0)
#define ASPEED_MDIO_DATA 0x4
#define ASPEED_MDIO_DATA_MDC_THRES GENMASK(31, 24)
#define ASPEED_MDIO_DATA_MDIO_EDGE BIT(23)
#define ASPEED_MDIO_DATA_MDIO_LATCH GENMASK(22, 20)
#define ASPEED_MDIO_DATA_IDLE BIT(16)
#define ASPEED_MDIO_DATA_MIIRDATA GENMASK(15, 0)
#define ASPEED_MDIO_INTERVAL_US 100
#define ASPEED_MDIO_TIMEOUT_US (ASPEED_MDIO_INTERVAL_US * 10)
struct aspeed_mdio {
void __iomem *base;
};
static int aspeed_mdio_read(struct mii_bus *bus, int addr, int regnum)
{
struct aspeed_mdio *ctx = bus->priv;
u32 ctrl;
u32 data;
int rc;
dev_dbg(&bus->dev, "%s: addr: %d, regnum: %d\n", __func__, addr,
regnum);
/* Just clause 22 for the moment */
if (regnum & MII_ADDR_C45)
return -EOPNOTSUPP;
ctrl = ASPEED_MDIO_CTRL_FIRE
| FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22)
| FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_READ)
| FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)
| FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, regnum);
iowrite32(ctrl, ctx->base + ASPEED_MDIO_CTRL);
rc = readl_poll_timeout(ctx->base + ASPEED_MDIO_DATA, data,
data & ASPEED_MDIO_DATA_IDLE,
ASPEED_MDIO_INTERVAL_US,
ASPEED_MDIO_TIMEOUT_US);
if (rc < 0)
return rc;
return FIELD_GET(ASPEED_MDIO_DATA_MIIRDATA, data);
}
static int aspeed_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val)
{
struct aspeed_mdio *ctx = bus->priv;
u32 ctrl;
dev_dbg(&bus->dev, "%s: addr: %d, regnum: %d, val: 0x%x\n",
__func__, addr, regnum, val);
/* Just clause 22 for the moment */
if (regnum & MII_ADDR_C45)
return -EOPNOTSUPP;
ctrl = ASPEED_MDIO_CTRL_FIRE
| FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22)
| FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_WRITE)
| FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)
| FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, regnum)
| FIELD_PREP(ASPEED_MDIO_CTRL_MIIWDATA, val);
iowrite32(ctrl, ctx->base + ASPEED_MDIO_CTRL);
return readl_poll_timeout(ctx->base + ASPEED_MDIO_CTRL, ctrl,
!(ctrl & ASPEED_MDIO_CTRL_FIRE),
ASPEED_MDIO_INTERVAL_US,
ASPEED_MDIO_TIMEOUT_US);
}
static int aspeed_mdio_probe(struct platform_device *pdev)
{
struct aspeed_mdio *ctx;
struct mii_bus *bus;
int rc;
bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*ctx));
if (!bus)
return -ENOMEM;
ctx = bus->priv;
ctx->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(ctx->base))
return PTR_ERR(ctx->base);
bus->name = DRV_NAME;
snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id);
bus->parent = &pdev->dev;
bus->read = aspeed_mdio_read;
bus->write = aspeed_mdio_write;
rc = of_mdiobus_register(bus, pdev->dev.of_node);
if (rc) {
dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
return rc;
}
platform_set_drvdata(pdev, bus);
return 0;
}
static int aspeed_mdio_remove(struct platform_device *pdev)
{
mdiobus_unregister(platform_get_drvdata(pdev));
return 0;
}
static const struct of_device_id aspeed_mdio_of_match[] = {
{ .compatible = "aspeed,ast2600-mdio", },
{ },
};
static struct platform_driver aspeed_mdio_driver = {
.driver = {
.name = DRV_NAME,
.of_match_table = aspeed_mdio_of_match,
},
.probe = aspeed_mdio_probe,
.remove = aspeed_mdio_remove,
};
module_platform_driver(aspeed_mdio_driver);
MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment