ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI

Neither the OHCI or EHCI bindings are using the phy-names property, so we
can just drop it.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -520,7 +520,6 @@ ehci0: usb@1c14000 {
 			interrupts = <39>;
 			clocks = <&ccu CLK_AHB_EHCI0>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -530,7 +529,6 @@ ohci0: usb@1c14400 {
 			interrupts = <64>;
 			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -610,7 +608,6 @@ ehci1: usb@1c1c000 {
 			interrupts = <40>;
 			clocks = <&ccu CLK_AHB_EHCI1>;
 			phys = <&usbphy 2>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -620,7 +617,6 @@ ohci1: usb@1c1c400 {
 			interrupts = <65>;
 			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
 			phys = <&usbphy 2>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun5i.dtsi

@@ -391,7 +391,6 @@ ehci0: usb@1c14000 {
 			interrupts = <39>;
 			clocks = <&ccu CLK_AHB_EHCI>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -401,7 +400,6 @@ ohci0: usb@1c14400 {
 			interrupts = <40>;
 			clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -543,7 +543,6 @@ ehci0: usb@1c1a000 {
 			clocks = <&ccu CLK_AHB1_EHCI0>;
 			resets = <&ccu RST_AHB1_EHCI0>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -554,7 +553,6 @@ ohci0: usb@1c1a400 {
 			clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_AHB1_OHCI0>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -565,7 +563,6 @@ ehci1: usb@1c1b000 {
 			clocks = <&ccu CLK_AHB1_EHCI1>;
 			resets = <&ccu RST_AHB1_EHCI1>;
 			phys = <&usbphy 2>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -576,7 +573,6 @@ ohci1: usb@1c1b400 {
 			clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_AHB1_OHCI1>;
 			phys = <&usbphy 2>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -612,7 +612,6 @@ ehci0: usb@1c14000 {
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_AHB_EHCI0>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -622,7 +621,6 @@ ohci0: usb@1c14400 {
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -705,7 +703,6 @@ ehci1: usb@1c1c000 {
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_AHB_EHCI1>;
 			phys = <&usbphy 2>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -715,7 +712,6 @@ ohci1: usb@1c1c400 {
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
 			phys = <&usbphy 2>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -307,7 +307,6 @@ ehci0: usb@1c1a000 {
 			clocks = <&ccu CLK_BUS_EHCI>;
 			resets = <&ccu RST_BUS_EHCI>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -318,7 +317,6 @@ ohci0: usb@1c1a400 {
 			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
 			resets = <&ccu RST_BUS_OHCI>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun8i-a83t.dtsi

@@ -632,7 +632,6 @@ ehci0: usb@1c1a000 {
 			clocks = <&ccu CLK_BUS_EHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -644,7 +643,6 @@ ohci0: usb@1c1a400 {
 			clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_OHCI0>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -656,7 +654,6 @@ ehci1: usb@1c1b000 {
 			clocks = <&ccu CLK_BUS_EHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>;
 			phys = <&usbphy 2>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun8i-r40.dtsi

@@ -273,7 +273,6 @@ ehci1: usb@1c19000 {
 			clocks = <&ccu CLK_BUS_EHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -285,7 +284,6 @@ ohci1: usb@1c19400 {
 				 <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -296,7 +294,6 @@ ehci2: usb@1c1c000 {
 			clocks = <&ccu CLK_BUS_EHCI2>;
 			resets = <&ccu RST_BUS_EHCI2>;
 			phys = <&usbphy 2>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -308,7 +305,6 @@ ohci2: usb@1c1c400 {
 				 <&ccu CLK_USB_OHCI2>;
 			resets = <&ccu RST_BUS_OHCI2>;
 			phys = <&usbphy 2>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun9i-a80.dtsi

@@ -342,7 +342,6 @@ ehci0: usb@a00000 {
 			clocks = <&usb_clocks CLK_BUS_HCI0>;
 			resets = <&usb_clocks RST_USB0_HCI>;
 			phys = <&usbphy1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -354,7 +353,6 @@ ohci0: usb@a00400 {
 				 <&usb_clocks CLK_USB_OHCI0>;
 			resets = <&usb_clocks RST_USB0_HCI>;
 			phys = <&usbphy1>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -376,7 +374,6 @@ ehci1: usb@a01000 {
 			clocks = <&usb_clocks CLK_BUS_HCI1>;
 			resets = <&usb_clocks RST_USB1_HCI>;
 			phys = <&usbphy2>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -406,7 +403,6 @@ ehci2: usb@a02000 {
 			clocks = <&usb_clocks CLK_BUS_HCI2>;
 			resets = <&usb_clocks RST_USB2_HCI>;
 			phys = <&usbphy3>;
-			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -418,7 +414,6 @@ ohci2: usb@a02400 {
 				 <&usb_clocks CLK_USB_OHCI2>;
 			resets = <&usb_clocks RST_USB2_HCI>;
 			phys = <&usbphy3>;
-			phy-names = "usb";
 			status = "disabled";
 		};