Commit 3d2e9f58 authored by Aleksa Savic's avatar Aleksa Savic Committed by Guenter Roeck

hwmon: (aquacomputer_d5next) Add support for reading calculated Aquaero sensors

Add support for reading four calculated virtual temp sensors on the
Aquacomputer Aquaero. Values of these sensors are calculated on the
device itself based on what the user configured in the official software.
Configuring these sensors is not currently reverse engineered.
Signed-off-by: default avatarAleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230101190056.1357124-1-savicaleksa83@gmail.comSigned-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent 4b8e5a93
......@@ -21,9 +21,9 @@ Description
This driver exposes hardware sensors of listed Aquacomputer devices, which
communicate through proprietary USB HID protocols.
The Aquaero devices expose eight temperature sensors, eight virtual temperature
sensors and two flow senors. The fans expose their speed (in RPM), power,
voltage and current.
The Aquaero devices expose eight physical, eight virtual and four calculated
virtual temperature sensors, as well as two flow sensors. The fans expose their
speed (in RPM), power, voltage and current.
For the D5 Next pump, available sensors are pump and fan speed, power, voltage
and current, as well as coolant temperature and eight virtual temp sensors. Also
......
......@@ -77,11 +77,13 @@ static u8 secondary_ctrl_report[] = {
#define AQUAERO_NUM_FANS 4
#define AQUAERO_NUM_SENSORS 8
#define AQUAERO_NUM_VIRTUAL_SENSORS 8
#define AQUAERO_NUM_CALC_VIRTUAL_SENSORS 4
#define AQUAERO_NUM_FLOW_SENSORS 2
/* Sensor report offsets for Aquaero fan controllers */
#define AQUAERO_SENSOR_START 0x65
#define AQUAERO_VIRTUAL_SENSOR_START 0x85
#define AQUAERO_CALC_VIRTUAL_SENSOR_START 0x95
#define AQUAERO_FLOW_SENSORS_START 0xF9
#define AQUAERO_FAN_VOLTAGE_OFFSET 0x04
#define AQUAERO_FAN_CURRENT_OFFSET 0x06
......@@ -232,6 +234,13 @@ static const char *const label_virtual_temp_sensors[] = {
"Virtual sensor 16",
};
static const char *const label_aquaero_calc_temp_sensors[] = {
"Calc. virtual sensor 1",
"Calc. virtual sensor 2",
"Calc. virtual sensor 3",
"Calc. virtual sensor 4"
};
/* Labels for Octo and Quadro (except speed) */
static const char *const label_fan_speed[] = {
"Fan 1 speed",
......@@ -361,6 +370,8 @@ struct aqc_data {
int temp_sensor_start_offset;
int num_virtual_temp_sensors;
int virtual_temp_sensor_start_offset;
int num_calc_virt_temp_sensors;
int calc_virt_temp_sensor_start_offset;
u16 temp_ctrl_offset;
u16 power_cycle_count_offset;
int num_flow_sensors;
......@@ -378,7 +389,7 @@ struct aqc_data {
u32 power_cycles;
/* Sensor values */
s32 temp_input[20]; /* Max 4 physical and 16 virtual */
s32 temp_input[20]; /* Max 4 physical and 16 virtual or 8 physical and 12 virtual */
u16 speed_input[8];
u32 power_input[8];
u16 voltage_input[8];
......@@ -387,6 +398,7 @@ struct aqc_data {
/* Label values */
const char *const *temp_label;
const char *const *virtual_temp_label;
const char *const *calc_virt_temp_label; /* For Aquaero */
const char *const *speed_label;
const char *const *power_label;
const char *const *voltage_label;
......@@ -507,7 +519,9 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
}
}
if (channel < priv->num_temp_sensors + priv->num_virtual_temp_sensors)
if (channel <
priv->num_temp_sensors + priv->num_virtual_temp_sensors +
priv->num_calc_virt_temp_sensors)
switch (attr) {
case hwmon_temp_label:
case hwmon_temp_input:
......@@ -676,12 +690,20 @@ static int aqc_read_string(struct device *dev, enum hwmon_sensor_types type, u32
{
struct aqc_data *priv = dev_get_drvdata(dev);
/* Number of sensors that are not calculated */
int num_non_calc_sensors = priv->num_temp_sensors + priv->num_virtual_temp_sensors;
switch (type) {
case hwmon_temp:
if (channel < priv->num_temp_sensors)
if (channel < priv->num_temp_sensors) {
*str = priv->temp_label[channel];
else
*str = priv->virtual_temp_label[channel - priv->num_temp_sensors];
} else {
if (priv->kind == aquaero && channel >= num_non_calc_sensors)
*str =
priv->calc_virt_temp_label[channel - num_non_calc_sensors];
else
*str = priv->virtual_temp_label[channel - priv->num_temp_sensors];
}
break;
case hwmon_fan:
*str = priv->speed_label[channel];
......@@ -910,6 +932,20 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
/* Special-case sensor readings */
switch (priv->kind) {
case aquaero:
/* Read calculated virtual temp sensors */
i = priv->num_temp_sensors + priv->num_virtual_temp_sensors;
for (j = 0; j < priv->num_calc_virt_temp_sensors; j++) {
sensor_value = get_unaligned_be16(data +
priv->calc_virt_temp_sensor_start_offset +
j * AQC_SENSOR_SIZE);
if (sensor_value == AQC_TEMP_SENSOR_DISCONNECTED)
priv->temp_input[i] = -ENODATA;
else
priv->temp_input[i] = sensor_value * 10;
i++;
}
break;
case d5next:
priv->voltage_input[2] = get_unaligned_be16(data + D5NEXT_5V_VOLTAGE) * 10;
priv->voltage_input[3] = get_unaligned_be16(data + D5NEXT_12V_VOLTAGE) * 10;
......@@ -1046,11 +1082,14 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->temp_sensor_start_offset = AQUAERO_SENSOR_START;
priv->num_virtual_temp_sensors = AQUAERO_NUM_VIRTUAL_SENSORS;
priv->virtual_temp_sensor_start_offset = AQUAERO_VIRTUAL_SENSOR_START;
priv->num_calc_virt_temp_sensors = AQUAERO_NUM_CALC_VIRTUAL_SENSORS;
priv->calc_virt_temp_sensor_start_offset = AQUAERO_CALC_VIRTUAL_SENSOR_START;
priv->num_flow_sensors = AQUAERO_NUM_FLOW_SENSORS;
priv->flow_sensors_start_offset = AQUAERO_FLOW_SENSORS_START;
priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
priv->calc_virt_temp_label = label_aquaero_calc_temp_sensors;
priv->speed_label = label_aquaero_speeds;
priv->power_label = label_fan_power;
priv->voltage_label = label_fan_voltage;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment