Commit 3d653adb authored by Doug Berger's avatar Doug Berger Committed by David S. Miller

net: bcmgenet: test RBUF_ACPI_EN when resuming

When the GENET driver resumes from deep sleep the UMAC_CMD
register may not be accessible and therefore should not be
accessed from bcmgenet_wol_power_up_cfg() if the GENET has
been reset.

This commit adds a check of the RBUF_ACPI_EN flag when Wake
on Filter is enabled. A clear flag indicates that the GENET
hardware must have been reset so the remainder of the
hardware programming is bypassed.

Fixes: f50932cc ("net: bcmgenet: add WAKE_FILTER support")
Signed-off-by: default avatarDoug Berger <opendmb@gmail.com>
Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 2f11f0df
......@@ -229,9 +229,13 @@ void bcmgenet_wol_power_up_cfg(struct bcmgenet_priv *priv,
}
/* Disable WAKE_FILTER Detection */
reg = bcmgenet_hfb_reg_readl(priv, HFB_CTRL);
reg &= ~(RBUF_HFB_EN | RBUF_ACPI_EN);
bcmgenet_hfb_reg_writel(priv, reg, HFB_CTRL);
if (priv->wolopts & WAKE_FILTER) {
reg = bcmgenet_hfb_reg_readl(priv, HFB_CTRL);
if (!(reg & RBUF_ACPI_EN))
return; /* already reset so skip the rest */
reg &= ~(RBUF_HFB_EN | RBUF_ACPI_EN);
bcmgenet_hfb_reg_writel(priv, reg, HFB_CTRL);
}
/* Disable CRC Forward */
reg = bcmgenet_umac_readl(priv, UMAC_CMD);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment