Commit 3d8f7a89 authored by Guenter Roeck's avatar Guenter Roeck

hwmon: (tmp102) Improve handling of initial read delay

If the chip was in shutdown mode when the driver was loaded, the first
conversion is ready no more than 35 milli-seconds after the chip was
taken out of shutdown. The driver delay was so far set to 333 ms (HZ / 3),
which is much higher than the maximum time needed by the chip.
Reduce the time to 35 milli-seconds.

Introduce a 'valid' flag to ensure that sensor data is actually read
even if requested less than 333 ms after the driver was loaded.
Acked-by: default avatarNishanth Menon <nm@ti.com>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent 589f707c
......@@ -13,6 +13,7 @@
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
......@@ -46,13 +47,16 @@
#define TMP102_TLOW_REG 0x02
#define TMP102_THIGH_REG 0x03
#define CONVERSION_TIME_MS 35 /* in milli-seconds */
struct tmp102 {
struct i2c_client *client;
struct mutex lock;
u16 config_orig;
unsigned long last_update;
unsigned long ready_time;
bool valid;
int temp[3];
bool first_time;
};
/* convert left adjusted 13-bit TMP102 register value to milliCelsius */
......@@ -73,13 +77,14 @@ static const u8 tmp102_reg[] = {
TMP102_THIGH_REG,
};
static struct tmp102 *tmp102_update_device(struct device *dev)
static void tmp102_update_device(struct device *dev)
{
struct tmp102 *tmp102 = dev_get_drvdata(dev);
struct i2c_client *client = tmp102->client;
mutex_lock(&tmp102->lock);
if (time_after(jiffies, tmp102->last_update + HZ / 3)) {
if (!tmp102->valid ||
time_after(jiffies, tmp102->last_update + HZ / 3)) {
int i;
for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) {
int status = i2c_smbus_read_word_swapped(client,
......@@ -88,22 +93,22 @@ static struct tmp102 *tmp102_update_device(struct device *dev)
tmp102->temp[i] = tmp102_reg_to_mC(status);
}
tmp102->last_update = jiffies;
tmp102->first_time = false;
tmp102->valid = true;
}
mutex_unlock(&tmp102->lock);
return tmp102;
}
static int tmp102_read_temp(void *dev, int *temp)
{
struct tmp102 *tmp102 = tmp102_update_device(dev);
struct tmp102 *tmp102 = dev_get_drvdata(dev);
/* Is it too early even to return a conversion? */
if (tmp102->first_time) {
if (time_before(jiffies, tmp102->ready_time)) {
dev_dbg(dev, "%s: Conversion not ready yet..\n", __func__);
return -EAGAIN;
}
tmp102_update_device(dev);
*temp = tmp102->temp[0];
return 0;
......@@ -114,12 +119,13 @@ static ssize_t tmp102_show_temp(struct device *dev,
char *buf)
{
struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
struct tmp102 *tmp102 = tmp102_update_device(dev);
struct tmp102 *tmp102 = dev_get_drvdata(dev);
/* Is it too early even to return a read? */
if (tmp102->first_time)
if (time_before(jiffies, tmp102->ready_time))
return -EAGAIN;
tmp102_update_device(dev);
return sprintf(buf, "%d\n", tmp102->temp[sda->index]);
}
......@@ -224,11 +230,18 @@ static int tmp102_probe(struct i2c_client *client,
dev_err(dev, "config settings did not stick\n");
return -ENODEV;
}
tmp102->last_update = jiffies;
/* Mark that we are not ready with data until conversion is complete */
tmp102->first_time = true;
mutex_init(&tmp102->lock);
tmp102->ready_time = jiffies;
if (tmp102->config_orig & TMP102_CONF_SD) {
/*
* Mark that we are not ready with data until the first
* conversion is complete
*/
tmp102->ready_time += msecs_to_jiffies(CONVERSION_TIME_MS);
}
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
tmp102,
tmp102_groups);
......@@ -261,12 +274,15 @@ static int tmp102_suspend(struct device *dev)
static int tmp102_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct tmp102 *tmp102 = i2c_get_clientdata(client);
int config;
config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
if (config < 0)
return config;
tmp102->ready_time = jiffies + msecs_to_jiffies(CONVERSION_TIME_MS);
config &= ~TMP102_CONF_SD;
return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment