Merge branch 'clockevents/4.8' of...

Merge branch 'clockevents/4.8' of http://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull the clockevents/clocksource tree from Daniel Lezcano:

  - Convert the clocksource-probe init functions to return a value in order to
    prepare the consolidation of the drivers using the DT. It is a big patchset
    but went through 01.org (kbuild bot), linux next and kernel-ci (continuous
    integration) (Daniel Lezcano)

  - Fix a bad error handling by returning the right value for cadence_ttc
    (Christophe Jaillet)

  - Fix typo in the Kconfig for the Samsung pwm (Alexandre Belloni)

  - Change functions to static for armada-370-xp and digicolor (Ben Dooks)

  - Add support for the rk3399 SoC timer by adding bindings and a slight
    change in the base address. Take the opportunity to add the DYNIRQ flag
    (Huang Tao)

  - Fix endian accessors for the Samsung pwm timer (Matthew Leach)

  - Add Oxford Semiconductor RPS Dual Timer driver (Neil Armstrong)

  - Add a kernel parameter to swich on/off the event stream feature of the arch
    arm timer (Will Deacon)

Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt

+Oxford Semiconductor OXNAS SoCs Family RPS Timer
+================================================
+
+Required properties:
+- compatible: Should be "oxsemi,ox810se-rps-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupts of the two timers
+- clocks : The phandle of the timer clock source
+
+example:
+
+timer0: timer@200 {
+	compatible = "oxsemi,ox810se-rps-timer";
+	reg = <0x200 0x40>;
+	clocks = <&rpsclk>;
+	interrupts = <4 5>;
+};

Documentation/devicetree/bindings/timer/rockchip,rk3288-timer.txt → Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt

-Rockchip rk3288 timer
+Rockchip rk timer
 
 Required properties:
-- compatible: shall be "rockchip,rk3288-timer"
+- compatible: shall be one of:
+  "rockchip,rk3288-timer" - for rk3066, rk3036, rk3188, rk322x, rk3288, rk3368
+  "rockchip,rk3399-timer" - for rk3399
 - reg: base address of the timer register starting with TIMERS CONTROL register
 - interrupts: should contain the interrupts for Timer0
 - clocks : must contain an entry for each entry in clock-names

Documentation/kernel-parameters.txt

@@ -687,6 +687,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			[SPARC64] tick
 			[X86-64] hpet,tsc
 
+	clocksource.arm_arch_timer.evtstrm=
+			[ARM,ARM64]
+			Format: <bool>
+			Enable/disable the eventstream feature of the ARM
+			architected timer so that code using WFE-based polling
+			loops can be debugged more effectively on production
+			systems.
+
 	clearcpuid=BITNUM [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit

arch/arc/kernel/time.c

@@ -116,19 +116,19 @@ static struct clocksource arc_counter_gfrc = {
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init arc_cs_setup_gfrc(struct device_node *node)
+static int __init arc_cs_setup_gfrc(struct device_node *node)
 {
 	int exists = cpuinfo_arc700[0].extn.gfrc;
 	int ret;
 
 	if (WARN(!exists, "Global-64-bit-Ctr clocksource not detected"))
-		return;
+		return -ENXIO;
 
 	ret = arc_get_timer_clk(node);
 	if (ret)
-		return;
+		return ret;
 
-	clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq);
+	return clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq);
 }
 CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
 
@@ -172,25 +172,25 @@ static struct clocksource arc_counter_rtc = {
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init arc_cs_setup_rtc(struct device_node *node)
+static int __init arc_cs_setup_rtc(struct device_node *node)
 {
 	int exists = cpuinfo_arc700[smp_processor_id()].extn.rtc;
 	int ret;
 
 	if (WARN(!exists, "Local-64-bit-Ctr clocksource not detected"))
-		return;
+		return -ENXIO;
 
 	/* Local to CPU hence not usable in SMP */
 	if (WARN(IS_ENABLED(CONFIG_SMP), "Local-64-bit-Ctr not usable in SMP"))
-		return;
+		return -EINVAL;
 
 	ret = arc_get_timer_clk(node);
 	if (ret)
-		return;
+		return ret;
 
 	write_aux_reg(AUX_RTC_CTRL, 1);
 
-	clocksource_register_hz(&arc_counter_rtc, arc_timer_freq);
+	return clocksource_register_hz(&arc_counter_rtc, arc_timer_freq);
 }
 CLOCKSOURCE_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc);
 
@@ -213,23 +213,23 @@ static struct clocksource arc_counter_timer1 = {
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init arc_cs_setup_timer1(struct device_node *node)
+static int __init arc_cs_setup_timer1(struct device_node *node)
 {
 	int ret;
 
 	/* Local to CPU hence not usable in SMP */
 	if (IS_ENABLED(CONFIG_SMP))
-		return;
+		return -EINVAL;
 
 	ret = arc_get_timer_clk(node);
 	if (ret)
-		return;
+		return ret;
 
 	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
 	write_aux_reg(ARC_REG_TIMER1_CNT, 0);
 	write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
 
-	clocksource_register_hz(&arc_counter_timer1, arc_timer_freq);
+	return clocksource_register_hz(&arc_counter_timer1, arc_timer_freq);
 }
 
 /********** Clock Event Device *********/
@@ -324,20 +324,28 @@ static struct notifier_block arc_timer_cpu_nb = {
 /*
  * clockevent setup for boot CPU
  */
-static void __init arc_clockevent_setup(struct device_node *node)
+static int __init arc_clockevent_setup(struct device_node *node)
 {
 	struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
 	int ret;
 
-	register_cpu_notifier(&arc_timer_cpu_nb);
+	ret = register_cpu_notifier(&arc_timer_cpu_nb);
+	if (ret) {
+		pr_err("Failed to register cpu notifier");
+		return ret;
+	}
 
 	arc_timer_irq = irq_of_parse_and_map(node, 0);
-	if (arc_timer_irq <= 0)
-		panic("clockevent: missing irq");
+	if (arc_timer_irq <= 0) {
+		pr_err("clockevent: missing irq");
+		return -EINVAL;
+	}
 
 	ret = arc_get_timer_clk(node);
-	if (ret)
-		panic("clockevent: missing clk");
+	if (ret) {
+		pr_err("clockevent: missing clk");
+		return ret;
+	}
 
 	evt->irq = arc_timer_irq;
 	evt->cpumask = cpumask_of(smp_processor_id());
@@ -347,22 +355,29 @@ static void __init arc_clockevent_setup(struct device_node *node)
 	/* Needs apriori irq_set_percpu_devid() done in intc map function */
 	ret = request_percpu_irq(arc_timer_irq, timer_irq_handler,
 				 "Timer0 (per-cpu-tick)", evt);
-	if (ret)
-		panic("clockevent: unable to request irq\n");
+	if (ret) {
+		pr_err("clockevent: unable to request irq\n");
+		return ret;
+	}
 
 	enable_percpu_irq(arc_timer_irq, 0);
+
+	return 0;
 }
 
-static void __init arc_of_timer_init(struct device_node *np)
+static int __init arc_of_timer_init(struct device_node *np)
 {
 	static int init_count = 0;
+	int ret;
 
 	if (!init_count) {
 		init_count = 1;
-		arc_clockevent_setup(np);
+		ret = arc_clockevent_setup(np);
 	} else {
-		arc_cs_setup_timer1(np);
+		ret = arc_cs_setup_timer1(np);
 	}
+
+	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init);
 

arch/arm/Kconfig

@@ -358,10 +358,10 @@ config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
 	select AUTO_ZRELADDR
-	select CLKSRC_MMIO
 	select COMMON_CLK
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
+	select CLPS711X_TIMER
 	select MFD_SYSCON
 	select SOC_BUS
 	help

arch/arm/kernel/smp_twd.c

@@ -390,7 +390,7 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt)
 }
 
 #ifdef CONFIG_OF
-static void __init twd_local_timer_of_register(struct device_node *np)
+static int __init twd_local_timer_of_register(struct device_node *np)
 {
 	int err;
 
@@ -410,6 +410,7 @@ static void __init twd_local_timer_of_register(struct device_node *np)
 
 out:
 	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
+	return err;
 }
 CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
 CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);

arch/arm/mach-bcm/Kconfig

@@ -89,6 +89,7 @@ config ARCH_BCM_MOBILE
 	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL
 	select ARCH_BCM_MOBILE_SMP if SMP
+	select BCM_KONA_TIMER
 	help
 	  This enables support for systems based on Broadcom mobile SoCs.
 
@@ -143,6 +144,7 @@ config ARCH_BCM2835
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select CLKSRC_OF
+	select BCM2835_TIMER
 	select PINCTRL
 	select PINCTRL_BCM2835
 	help

arch/arm/mach-integrator/Kconfig

@@ -20,7 +20,7 @@ if ARCH_INTEGRATOR
 
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
-	select CLKSRC_MMIO
+	select INTEGRATOR_AP_TIMER
 	select MIGHT_HAVE_PCI
 	select SERIAL_AMBA_PL010 if TTY
 	select SERIAL_AMBA_PL010_CONSOLE if TTY

arch/arm/mach-keystone/Kconfig

@@ -4,7 +4,7 @@ config ARCH_KEYSTONE
 	depends on ARM_PATCH_PHYS_VIRT
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
-	select CLKSRC_MMIO
+	select KEYSTONE_TIMER
 	select ARM_ERRATA_798181 if SMP
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN

arch/arm/mach-moxart/Kconfig

@@ -3,7 +3,7 @@ menuconfig ARCH_MOXART
 	depends on ARCH_MULTI_V4
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
-	select CLKSRC_MMIO
+	select MOXART_TIMER
 	select GENERIC_IRQ_CHIP
 	select ARCH_REQUIRE_GPIOLIB
 	select PHYLIB if NETDEVICES

arch/arm/mach-mxs/Kconfig

@@ -16,7 +16,7 @@ config ARCH_MXS
 	bool "Freescale MXS (i.MX23, i.MX28) support"
 	depends on ARCH_MULTI_V5
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKSRC_MMIO
+	select MXS_TIMER
 	select PINCTRL
 	select SOC_BUS
 	select SOC_IMX23

arch/arm/mach-nspire/Kconfig

@@ -7,5 +7,6 @@ config ARCH_NSPIRE
 	select ARM_AMBA
 	select ARM_VIC
 	select ARM_TIMER_SP804
+	select NSPIRE_TIMER
 	help
 	  This enables support for systems using the TI-NSPIRE CPU

arch/arm/mach-prima2/Kconfig

@@ -28,6 +28,7 @@ config ARCH_ATLAS7
 	default y
 	select ARM_GIC
 	select CPU_V7
+	select ATLAS7_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	help
@@ -38,6 +39,7 @@ config ARCH_PRIMA2
 	default y
 	select SIRF_IRQ
 	select ZONE_DMA
+	select PRIMA2_TIMER
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform
 

arch/arm/mach-u300/Kconfig

@@ -4,7 +4,7 @@ menuconfig ARCH_U300
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
-	select CLKSRC_MMIO
+	select U300_TIMER
 	select CPU_ARM926T
 	select HAVE_TCM
 	select PINCTRL

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -492,6 +492,14 @@ watchdog@ff840000 {
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	rktimer: rktimer@ff850000 {
+		compatible = "rockchip,rk3399-timer";
+		reg = <0x0 0xff850000 0x0 0x1000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
+		clock-names = "pclk", "timer";
+	};
+
 	spdif: spdif@ff870000 {
 		compatible = "rockchip,rk3399-spdif";
 		reg = <0x0 0xff870000 0x0 0x1000>;

arch/microblaze/kernel/timer.c

@@ -170,7 +170,7 @@ static struct irqaction timer_irqaction = {
 	.dev_id = &clockevent_xilinx_timer,
 };
 
-static __init void xilinx_clockevent_init(void)
+static __init int xilinx_clockevent_init(void)
 {
 	clockevent_xilinx_timer.mult =
 		div_sc(timer_clock_freq, NSEC_PER_SEC,
@@ -181,6 +181,8 @@ static __init void xilinx_clockevent_init(void)
 		clockevent_delta2ns(1, &clockevent_xilinx_timer);
 	clockevent_xilinx_timer.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_xilinx_timer);
+
+	return 0;
 }
 
 static u64 xilinx_clock_read(void)
@@ -229,8 +231,14 @@ static struct clocksource clocksource_microblaze = {
 
 static int __init xilinx_clocksource_init(void)
 {
-	if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq))
-		panic("failed to register clocksource");
+	int ret;
+
+	ret = clocksource_register_hz(&clocksource_microblaze,
+				      timer_clock_freq);
+	if (ret) {
+		pr_err("failed to register clocksource");
+		return ret;
+	}
 
 	/* stop timer1 */
 	write_fn(read_fn(timer_baseaddr + TCSR1) & ~TCSR_ENT,
@@ -239,16 +247,16 @@ static int __init xilinx_clocksource_init(void)
 	write_fn(TCSR_TINT|TCSR_ENT|TCSR_ARHT, timer_baseaddr + TCSR1);
 
 	/* register timecounter - for ftrace support */
-	init_xilinx_timecounter();
-	return 0;
+	return init_xilinx_timecounter();
 }
 
-static void __init xilinx_timer_init(struct device_node *timer)
+static int __init xilinx_timer_init(struct device_node *timer)
 {
 	struct clk *clk;
 	static int initialized;
 	u32 irq;
 	u32 timer_num = 1;
+	int ret;
 
 	if (initialized)
 		return;
@@ -258,7 +266,7 @@ static void __init xilinx_timer_init(struct device_node *timer)
 	timer_baseaddr = of_iomap(timer, 0);
 	if (!timer_baseaddr) {
 		pr_err("ERROR: invalid timer base address\n");
-		BUG();
+		return -ENXIO;
 	}
 
 	write_fn = timer_write32;
@@ -271,11 +279,15 @@ static void __init xilinx_timer_init(struct device_node *timer)
 	}
 
 	irq = irq_of_parse_and_map(timer, 0);
+	if (irq <= 0) {
+		pr_err("Failed to parse and map irq");
+		return -EINVAL;
+	}
 
 	of_property_read_u32(timer, "xlnx,one-timer-only", &timer_num);
 	if (timer_num) {
-		pr_emerg("Please enable two timers in HW\n");
-		BUG();
+		pr_err("Please enable two timers in HW\n");
+		return -EINVAL;
 	}
 
 	pr_info("%s: irq=%d\n", timer->full_name, irq);
@@ -297,14 +309,27 @@ static void __init xilinx_timer_init(struct device_node *timer)
 
 	freq_div_hz = timer_clock_freq / HZ;
 
-	setup_irq(irq, &timer_irqaction);
+	ret = setup_irq(irq, &timer_irqaction);
+	if (ret) {
+		pr_err("Failed to setup IRQ");
+		return ret;
+	}
+
 #ifdef CONFIG_HEART_BEAT
 	microblaze_setup_heartbeat();
 #endif
-	xilinx_clocksource_init();
-	xilinx_clockevent_init();
+
+	ret = xilinx_clocksource_init();
+	if (ret)
+		return ret;
+
+	ret = xilinx_clockevent_init();
+	if (ret)
+		return ret;
 
 	sched_clock_register(xilinx_clock_read, 32, timer_clock_freq);
+
+	return 0;
 }
 
 CLOCKSOURCE_OF_DECLARE(xilinx_timer, "xlnx,xps-timer-1.00.a",

arch/mips/ralink/cevt-rt3352.c

@@ -117,11 +117,13 @@ static int systick_set_oneshot(struct clock_event_device *evt)
 	return 0;
 }
 
-static void __init ralink_systick_init(struct device_node *np)
+static int __init ralink_systick_init(struct device_node *np)
 {
+	int ret;
+
 	systick.membase = of_iomap(np, 0);
 	if (!systick.membase)
-		return;
+		return -ENXIO;
 
 	systick_irqaction.name = np->name;
 	systick.dev.name = np->name;
@@ -131,16 +133,21 @@ static void __init ralink_systick_init(struct device_node *np)
 	systick.dev.irq = irq_of_parse_and_map(np, 0);
 	if (!systick.dev.irq) {
 		pr_err("%s: request_irq failed", np->name);
-		return;
+		return -EINVAL;
 	}
 
-	clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
-			SYSTICK_FREQ, 301, 16, clocksource_mmio_readl_up);
+	ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
+				    SYSTICK_FREQ, 301, 16,
+				    clocksource_mmio_readl_up);
+	if (ret)
+		return ret;
 
 	clockevents_register_device(&systick.dev);
 
 	pr_info("%s: running - mult: %d, shift: %d\n",
 			np->name, systick.dev.mult, systick.dev.shift);
+
+	return 0;
 }
 
 CLOCKSOURCE_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);

arch/nios2/kernel/time.c

@@ -206,15 +206,21 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void __init nios2_timer_get_base_and_freq(struct device_node *np,
+static int __init nios2_timer_get_base_and_freq(struct device_node *np,
 				void __iomem **base, u32 *freq)
 {
 	*base = of_iomap(np, 0);
-	if (!*base)
-		panic("Unable to map reg for %s\n", np->name);
+	if (!*base) {
+		pr_crit("Unable to map reg for %s\n", np->name);
+		return -ENXIO;
+	}
+
+	if (of_property_read_u32(np, "clock-frequency", freq)) {
+		pr_crit("Unable to get %s clock frequency\n", np->name);
+		return -EINVAL;
+	}
 
-	if (of_property_read_u32(np, "clock-frequency", freq))
-		panic("Unable to get %s clock frequency\n", np->name);
+	return 0;
 }
 
 static struct nios2_clockevent_dev nios2_ce = {
@@ -231,17 +237,21 @@ static struct nios2_clockevent_dev nios2_ce = {
 	},
 };
 
-static __init void nios2_clockevent_init(struct device_node *timer)
+static __init int nios2_clockevent_init(struct device_node *timer)
 {
 	void __iomem *iobase;
 	u32 freq;
-	int irq;
+	int irq, ret;
 
-	nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+	ret = nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+	if (ret)
+		return ret;
 
 	irq = irq_of_parse_and_map(timer, 0);
-	if (!irq)
-		panic("Unable to parse timer irq\n");
+	if (!irq) {
+		pr_crit("Unable to parse timer irq\n");
+		return -EINVAL;
+	}
 
 	nios2_ce.timer.base = iobase;
 	nios2_ce.timer.freq = freq;
@@ -253,25 +263,35 @@ static __init void nios2_clockevent_init(struct device_node *timer)
 	/* clear pending interrupt */
 	timer_writew(&nios2_ce.timer, 0, ALTERA_TIMER_STATUS_REG);
 
-	if (request_irq(irq, timer_interrupt, IRQF_TIMER, timer->name,
-		&nios2_ce.ced))
-		panic("Unable to setup timer irq\n");
+	ret = request_irq(irq, timer_interrupt, IRQF_TIMER, timer->name,
+			  &nios2_ce.ced);
+	if (ret) {
+		pr_crit("Unable to setup timer irq\n");
+		return ret;
+	}
 
 	clockevents_config_and_register(&nios2_ce.ced, freq, 1, ULONG_MAX);
+
+	return 0;
 }
 
-static __init void nios2_clocksource_init(struct device_node *timer)
+static __init int nios2_clocksource_init(struct device_node *timer)
 {
 	unsigned int ctrl;
 	void __iomem *iobase;
 	u32 freq;
+	int ret;
 
-	nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+	ret = nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+	if (ret)
+		return ret;
 
 	nios2_cs.timer.base = iobase;
 	nios2_cs.timer.freq = freq;
 
-	clocksource_register_hz(&nios2_cs.cs, freq);
+	ret = clocksource_register_hz(&nios2_cs.cs, freq);
+	if (ret)
+		return ret;
 
 	timer_writew(&nios2_cs.timer, USHRT_MAX, ALTERA_TIMER_PERIODL_REG);
 	timer_writew(&nios2_cs.timer, USHRT_MAX, ALTERA_TIMER_PERIODH_REG);
@@ -282,6 +302,8 @@ static __init void nios2_clocksource_init(struct device_node *timer)
 
 	/* Calibrate the delay loop directly */
 	lpj_fine = freq / HZ;
+
+	return 0;
 }
 
 /*
@@ -289,22 +311,25 @@ static __init void nios2_clocksource_init(struct device_node *timer)
  * more instances, the second one gets used as clocksource and all
  * others are unused.
 */
-static void __init nios2_time_init(struct device_node *timer)
+static int __init nios2_time_init(struct device_node *timer)
 {
 	static int num_called;
+	int ret;
 
 	switch (num_called) {
 	case 0:
-		nios2_clockevent_init(timer);
+		ret = nios2_clockevent_init(timer);
 		break;
 	case 1:
-		nios2_clocksource_init(timer);
+		ret = nios2_clocksource_init(timer);
 		break;
 	default:
 		break;
 	}
 
 	num_called++;
+
+	return ret;
 }
 
 void read_persistent_clock(struct timespec *ts)

drivers/clocksource/Kconfig

@@ -27,6 +27,20 @@ config CLKBLD_I8253
 config CLKSRC_MMIO
 	bool
 
+config BCM2835_TIMER
+	bool "BCM2835 timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enables the support for the BCM2835 timer driver.
+
+config BCM_KONA_TIMER
+	bool "BCM mobile timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enables the support for the BCM Kona mobile timer driver.
+
 config DIGICOLOR_TIMER
 	bool "Digicolor timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
@@ -141,6 +155,72 @@ config CLKSRC_DBX500_PRCMU
 	help
 	  Use the always on PRCMU Timer as clocksource
 
+config CLPS711X_TIMER
+	bool "Cirrus logic timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enables support for the Cirrus Logic PS711 timer.
+
+config ATLAS7_TIMER
+	bool "Atlas7 timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enables support for the Atlas7 timer.
+
+config MOXART_TIMER
+	bool "Moxart timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enables support for the Moxart timer.
+
+config MXS_TIMER
+	bool "Mxs timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	select STMP_DEVICE
+	help
+	  Enables support for the Mxs timer.
+
+config PRIMA2_TIMER
+	bool "Prima2 timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enables support for the Prima2 timer.
+
+config U300_TIMER
+	bool "U300 timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	depends on ARM
+	select CLKSRC_MMIO
+	help
+	  Enables support for the U300 timer.
+
+config NSPIRE_TIMER
+	bool "NSpire timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enables support for the Nspire timer.
+
+config KEYSTONE_TIMER
+	bool "Keystone timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	depends on ARM || ARM64
+	select CLKSRC_MMIO
+	help
+	  Enables support for the Keystone timer.
+
+config INTEGRATOR_AP_TIMER
+	bool "Integrator-ap timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enables support for the Integrator-ap timer.
+
 config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
 	bool "Clocksource PRCMU Timer sched_clock"
 	depends on (CLKSRC_DBX500_PRCMU && !CLKSRC_NOMADIK_MTU_SCHED_CLOCK)
@@ -208,14 +288,16 @@ config ARM_ARCH_TIMER
 	select CLKSRC_ACPI if ACPI
 
 config ARM_ARCH_TIMER_EVTSTREAM
-	bool "Support for ARM architected timer event stream generation"
+	bool "Enable ARM architected timer event stream generation by default"
 	default y if ARM_ARCH_TIMER
 	depends on ARM_ARCH_TIMER
 	help
-	  This option enables support for event stream generation based on
-	  the ARM architected timer. It is used for waking up CPUs executing
-	  the wfe instruction at a frequency represented as a power-of-2
-	  divisor of the clock rate.
+	  This option enables support by default for event stream generation
+	  based on the ARM architected timer. It is used for waking up CPUs
+	  executing the wfe instruction at a frequency represented as a
+	  power-of-2 divisor of the clock rate. The behaviour can also be
+	  overridden on the command line using the
+	  clocksource.arm_arch_timer.evtstream parameter.
 	  The main use of the event stream is wfe-based timeouts of userspace
 	  locking implementations. It might also be useful for imposing timeout
 	  on wfe to safeguard against any programming errors in case an expected
@@ -224,8 +306,9 @@ config ARM_ARCH_TIMER_EVTSTREAM
 	  hardware anomalies of missing events.
 
 config ARM_GLOBAL_TIMER
-	bool
+	bool "Support for the ARM global timer" if COMPILE_TEST
 	select CLKSRC_OF if OF
+	depends on ARM
 	help
 	  This options enables support for the ARM global timer unit
 
@@ -243,7 +326,7 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	 Use ARM global timer clock source as sched_clock
 
 config ARMV7M_SYSTICK
-	bool
+	bool "Support for the ARMv7M system time" if COMPILE_TEST
 	select CLKSRC_OF if OF
 	select CLKSRC_MMIO
 	help
@@ -254,9 +337,12 @@ config ATMEL_PIT
 	def_bool SOC_AT91SAM9 || SOC_SAMA5
 
 config ATMEL_ST
-	bool
+	bool "Atmel ST timer support" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
 	select CLKSRC_OF
 	select MFD_SYSCON
+	help
+	  Support for the Atmel ST timer.
 
 config CLKSRC_METAG_GENERIC
 	def_bool y if METAG
@@ -270,7 +356,7 @@ config CLKSRC_EXYNOS_MCT
 	  Support for Multi Core Timer controller on Exynos SoCs.
 
 config CLKSRC_SAMSUNG_PWM
-	bool "PWM timer drvier for Samsung S3C, S5P" if COMPILE_TEST
+	bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAS_IOMEM
 	help
@@ -293,6 +379,14 @@ config VF_PIT_TIMER
 	help
 	  Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
 
+config OXNAS_RPS_TIMER
+	bool "Oxford Semiconductor OXNAS RPS Timers driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_OF
+	select CLKSRC_MMIO
+	help
+	  This enables support for the Oxford Semiconductor OXNAS RPS timers.
+
 config SYS_SUPPORTS_SH_CMT
         bool
 
@@ -361,8 +455,8 @@ config CLKSRC_QCOM
 	  Qualcomm SoCs.
 
 config CLKSRC_VERSATILE
-	bool "ARM Versatile (Express) reference platforms clock source"
-	depends on PLAT_VERSATILE && GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET
+	bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST
+	depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET
 	select CLKSRC_OF
 	default y if MFD_VEXPRESS_SYSREG
 	help

drivers/clocksource/Makefile

@@ -19,21 +19,21 @@ obj-$(CONFIG_CLKSRC_NOMADIK_MTU)	+= nomadik-mtu.o
 obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
 obj-$(CONFIG_ORION_TIMER)	+= time-orion.o
-obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
-obj-$(CONFIG_ARCH_CLPS711X)	+= clps711x-timer.o
-obj-$(CONFIG_ARCH_ATLAS7)	+= timer-atlas7.o
-obj-$(CONFIG_ARCH_MOXART)	+= moxart_timer.o
-obj-$(CONFIG_ARCH_MXS)		+= mxs_timer.o
+obj-$(CONFIG_BCM2835_TIMER)	+= bcm2835_timer.o
+obj-$(CONFIG_CLPS711X_TIMER)	+= clps711x-timer.o
+obj-$(CONFIG_ATLAS7_TIMER)	+= timer-atlas7.o
+obj-$(CONFIG_MOXART_TIMER)	+= moxart_timer.o
+obj-$(CONFIG_MXS_TIMER)		+= mxs_timer.o
 obj-$(CONFIG_CLKSRC_PXA)	+= pxa_timer.o
-obj-$(CONFIG_ARCH_PRIMA2)	+= timer-prima2.o
-obj-$(CONFIG_ARCH_U300)		+= timer-u300.o
+obj-$(CONFIG_PRIMA2_TIMER)	+= timer-prima2.o
+obj-$(CONFIG_U300_TIMER)	+= timer-u300.o
 obj-$(CONFIG_SUN4I_TIMER)	+= sun4i_timer.o
 obj-$(CONFIG_SUN5I_HSTIMER)	+= timer-sun5i.o
 obj-$(CONFIG_MESON6_TIMER)	+= meson6_timer.o
 obj-$(CONFIG_TEGRA_TIMER)	+= tegra20_timer.o
 obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
-obj-$(CONFIG_ARCH_NSPIRE)	+= zevio-timer.o
-obj-$(CONFIG_ARCH_BCM_MOBILE)	+= bcm_kona_timer.o
+obj-$(CONFIG_NSPIRE_TIMER)	+= zevio-timer.o
+obj-$(CONFIG_BCM_KONA_TIMER)	+= bcm_kona_timer.o
 obj-$(CONFIG_CADENCE_TTC_TIMER)	+= cadence_ttc_timer.o
 obj-$(CONFIG_CLKSRC_EFM32)	+= time-efm32.o
 obj-$(CONFIG_CLKSRC_STM32)	+= timer-stm32.o
@@ -48,6 +48,7 @@ obj-$(CONFIG_MTK_TIMER)		+= mtk_timer.o
 obj-$(CONFIG_CLKSRC_PISTACHIO)	+= time-pistachio.o
 obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
 obj-$(CONFIG_CLKSRC_NPS)	+= timer-nps.o
+obj-$(CONFIG_OXNAS_RPS_TIMER)	+= timer-oxnas-rps.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
@@ -55,8 +56,8 @@ obj-$(CONFIG_ARMV7M_SYSTICK)		+= armv7m_systick.o
 obj-$(CONFIG_ARM_TIMER_SP804)		+= timer-sp804.o
 obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o
 obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST)	+= dummy_timer.o
-obj-$(CONFIG_ARCH_KEYSTONE)		+= timer-keystone.o
-obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= timer-integrator-ap.o
+obj-$(CONFIG_KEYSTONE_TIMER)		+= timer-keystone.o
+obj-$(CONFIG_INTEGRATOR_AP_TIMER)	+= timer-integrator-ap.o
 obj-$(CONFIG_CLKSRC_VERSATILE)		+= versatile.o
 obj-$(CONFIG_CLKSRC_MIPS_GIC)		+= mips-gic-timer.o
 obj-$(CONFIG_CLKSRC_TANGO_XTAL)		+= tango_xtal.o

drivers/clocksource/arm_arch_timer.c

@@ -79,6 +79,14 @@ static enum ppi_nr arch_timer_uses_ppi = VIRT_PPI;
 static bool arch_timer_c3stop;
 static bool arch_timer_mem_use_virtual;
 
+static bool evtstrm_enable = IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM);
+
+static int __init early_evtstrm_cfg(char *buf)
+{
+	return strtobool(buf, &evtstrm_enable);
+}
+early_param("clocksource.arm_arch_timer.evtstrm", early_evtstrm_cfg);
+
 /*
  * Architected system timer support.
  */
@@ -372,7 +380,7 @@ static int arch_timer_setup(struct clock_event_device *clk)
 		enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0);
 
 	arch_counter_set_user_access();
-	if (IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM))
+	if (evtstrm_enable)
 		arch_timer_configure_evtstream();
 
 	return 0;
@@ -693,25 +701,26 @@ arch_timer_needs_probing(int type, const struct of_device_id *matches)
 	return needs_probing;
 }
 
-static void __init arch_timer_common_init(void)
+static int __init arch_timer_common_init(void)
 {
 	unsigned mask = ARCH_CP15_TIMER | ARCH_MEM_TIMER;
 
 	/* Wait until both nodes are probed if we have two timers */
 	if ((arch_timers_present & mask) != mask) {
 		if (arch_timer_needs_probing(ARCH_MEM_TIMER, arch_timer_mem_of_match))
-			return;
+			return 0;
 		if (arch_timer_needs_probing(ARCH_CP15_TIMER, arch_timer_of_match))
-			return;
+			return 0;
 	}
 
 	arch_timer_banner(arch_timers_present);
 	arch_counter_register(arch_timers_present);
-	arch_timer_arch_init();
+	return arch_timer_arch_init();
 }
 
-static void __init arch_timer_init(void)
+static int __init arch_timer_init(void)
 {
+	int ret;
 	/*
 	 * If HYP mode is available, we know that the physical timer
 	 * has been configured to be accessible from PL1. Use it, so
@@ -739,23 +748,30 @@ static void __init arch_timer_init(void)
 
 		if (!has_ppi) {
 			pr_warn("arch_timer: No interrupt available, giving up\n");
-			return;
+			return -EINVAL;
 		}
 	}
 
-	arch_timer_register();
-	arch_timer_common_init();
+	ret = arch_timer_register();
+	if (ret)
+		return ret;
+
+	ret = arch_timer_common_init();
+	if (ret)
+		return ret;
 
 	arch_timer_kvm_info.virtual_irq = arch_timer_ppi[VIRT_PPI];
+	
+	return 0;
 }
 
-static void __init arch_timer_of_init(struct device_node *np)
+static int __init arch_timer_of_init(struct device_node *np)
 {
 	int i;
 
 	if (arch_timers_present & ARCH_CP15_TIMER) {
 		pr_warn("arch_timer: multiple nodes in dt, skipping\n");
-		return;
+		return 0;
 	}
 
 	arch_timers_present |= ARCH_CP15_TIMER;
@@ -774,23 +790,23 @@ static void __init arch_timer_of_init(struct device_node *np)
 	    of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
 		arch_timer_uses_ppi = PHYS_SECURE_PPI;
 
-	arch_timer_init();
+	return arch_timer_init();
 }
 CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
 CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
 
-static void __init arch_timer_mem_init(struct device_node *np)
+static int __init arch_timer_mem_init(struct device_node *np)
 {
 	struct device_node *frame, *best_frame = NULL;
 	void __iomem *cntctlbase, *base;
-	unsigned int irq;
+	unsigned int irq, ret = -EINVAL;
 	u32 cnttidr;
 
 	arch_timers_present |= ARCH_MEM_TIMER;
 	cntctlbase = of_iomap(np, 0);
 	if (!cntctlbase) {
 		pr_err("arch_timer: Can't find CNTCTLBase\n");
-		return;
+		return -ENXIO;
 	}
 
 	cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
@@ -830,6 +846,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
 		best_frame = of_node_get(frame);
 	}
 
+	ret= -ENXIO;
 	base = arch_counter_base = of_iomap(best_frame, 0);
 	if (!base) {
 		pr_err("arch_timer: Can't map frame's registers\n");
@@ -841,6 +858,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	else
 		irq = irq_of_parse_and_map(best_frame, 0);
 
+	ret = -EINVAL;
 	if (!irq) {
 		pr_err("arch_timer: Frame missing %s irq",
 		       arch_timer_mem_use_virtual ? "virt" : "phys");
@@ -848,11 +866,15 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	}
 
 	arch_timer_detect_rate(base, np);
-	arch_timer_mem_register(base, irq);
-	arch_timer_common_init();
+	ret = arch_timer_mem_register(base, irq);
+	if (ret)
+		goto out;
+
+	return arch_timer_common_init();
 out:
 	iounmap(cntctlbase);
 	of_node_put(best_frame);
+	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
 		       arch_timer_mem_init);

drivers/clocksource/arm_global_timer.c

@@ -238,7 +238,7 @@ static void __init gt_delay_timer_init(void)
 	register_current_timer_delay(&gt_delay_timer);
 }
 
-static void __init gt_clocksource_init(void)
+static int __init gt_clocksource_init(void)
 {
 	writel(0, gt_base + GT_CONTROL);
 	writel(0, gt_base + GT_COUNTER0);
@@ -249,7 +249,7 @@ static void __init gt_clocksource_init(void)
 #ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	sched_clock_register(gt_sched_clock_read, 64, gt_clk_rate);
 #endif
-	clocksource_register_hz(&gt_clocksource, gt_clk_rate);
+	return clocksource_register_hz(&gt_clocksource, gt_clk_rate);
 }
 
 static int gt_cpu_notify(struct notifier_block *self, unsigned long action,
@@ -270,7 +270,7 @@ static struct notifier_block gt_cpu_nb = {
 	.notifier_call = gt_cpu_notify,
 };
 
-static void __init global_timer_of_register(struct device_node *np)
+static int __init global_timer_of_register(struct device_node *np)
 {
 	struct clk *gt_clk;
 	int err = 0;
@@ -283,19 +283,19 @@ static void __init global_timer_of_register(struct device_node *np)
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9
 	    && (read_cpuid_id() & 0xf0000f) < 0x200000) {
 		pr_warn("global-timer: non support for this cpu version.\n");
-		return;
+		return -ENOSYS;
 	}
 
 	gt_ppi = irq_of_parse_and_map(np, 0);
 	if (!gt_ppi) {
 		pr_warn("global-timer: unable to parse irq\n");
-		return;
+		return -EINVAL;
 	}
 
 	gt_base = of_iomap(np, 0);
 	if (!gt_base) {
 		pr_warn("global-timer: invalid base address\n");
-		return;
+		return -ENXIO;
 	}
 
 	gt_clk = of_clk_get(np, 0);
@@ -332,11 +332,17 @@ static void __init global_timer_of_register(struct device_node *np)
 	}
 
 	/* Immediately configure the timer on the boot CPU */
-	gt_clocksource_init();
-	gt_clockevents_init(this_cpu_ptr(gt_evt));
+	err = gt_clocksource_init();
+	if (err)
+		goto out_irq;
+	
+	err = gt_clockevents_init(this_cpu_ptr(gt_evt));
+	if (err)
+		goto out_irq;
+
 	gt_delay_timer_init();
 
-	return;
+	return 0;
 
 out_irq:
 	free_percpu_irq(gt_ppi, gt_evt);
@@ -347,6 +353,8 @@ static void __init global_timer_of_register(struct device_node *np)
 out_unmap:
 	iounmap(gt_base);
 	WARN(err, "ARM Global timer register failed (%d)\n", err);
+
+	return err;
 }
 
 /* Only tested on r2p2 and r3p0  */

drivers/clocksource/armv7m_systick.c

@@ -7,6 +7,7 @@
 #include <linux/kernel.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/clk.h>
@@ -21,7 +22,7 @@
 
 #define SYSTICK_LOAD_RELOAD_MASK 0x00FFFFFF
 
-static void __init system_timer_of_register(struct device_node *np)
+static int __init system_timer_of_register(struct device_node *np)
 {
 	struct clk *clk = NULL;
 	void __iomem *base;
@@ -31,22 +32,26 @@ static void __init system_timer_of_register(struct device_node *np)
 	base = of_iomap(np, 0);
 	if (!base) {
 		pr_warn("system-timer: invalid base address\n");
-		return;
+		return -ENXIO;
 	}
 
 	ret = of_property_read_u32(np, "clock-frequency", &rate);
 	if (ret) {
 		clk = of_clk_get(np, 0);
-		if (IS_ERR(clk))
+		if (IS_ERR(clk)) {
+			ret = PTR_ERR(clk);
 			goto out_unmap;
+		}
 
 		ret = clk_prepare_enable(clk);
 		if (ret)
 			goto out_clk_put;
 
 		rate = clk_get_rate(clk);
-		if (!rate)
+		if (!rate) {
+			ret = -EINVAL;
 			goto out_clk_disable;
+		}
 	}
 
 	writel_relaxed(SYSTICK_LOAD_RELOAD_MASK, base + SYST_RVR);
@@ -64,7 +69,7 @@ static void __init system_timer_of_register(struct device_node *np)
 
 	pr_info("ARM System timer initialized as clocksource\n");
 
-	return;
+	return 0;
 
 out_clk_disable:
 	clk_disable_unprepare(clk);
@@ -73,6 +78,8 @@ static void __init system_timer_of_register(struct device_node *np)
 out_unmap:
 	iounmap(base);
 	pr_warn("ARM System timer register failed (%d)\n", ret);
+
+	return ret;
 }
 
 CLOCKSOURCE_OF_DECLARE(arm_systick, "arm,armv7m-systick",

drivers/clocksource/asm9260_timer.c

@@ -184,7 +184,7 @@ static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-static void __init asm9260_timer_init(struct device_node *np)
+static int __init asm9260_timer_init(struct device_node *np)
 {
 	int irq;
 	struct clk *clk;
@@ -192,20 +192,26 @@ static void __init asm9260_timer_init(struct device_node *np)
 	unsigned long rate;
 
 	priv.base = of_io_request_and_map(np, 0, np->name);
-	if (IS_ERR(priv.base))
-		panic("%s: unable to map resource", np->name);
+	if (IS_ERR(priv.base)) {
+		pr_err("%s: unable to map resource", np->name);
+		return PTR_ERR(priv.base);
+	}
 
 	clk = of_clk_get(np, 0);
 
 	ret = clk_prepare_enable(clk);
-	if (ret)
-		panic("Failed to enable clk!\n");
+	if (ret) {
+		pr_err("Failed to enable clk!\n");
+		return ret;
+	}
 
 	irq = irq_of_parse_and_map(np, 0);
 	ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER,
 			DRIVER_NAME, &event_dev);
-	if (ret)
-		panic("Failed to setup irq!\n");
+	if (ret) {
+		pr_err("Failed to setup irq!\n");
+		return ret;
+	}
 
 	/* set all timers for count-up */
 	writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR);
@@ -229,6 +235,8 @@ static void __init asm9260_timer_init(struct device_node *np)
 	priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
 	event_dev.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe);
+
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
 		asm9260_timer_init);

drivers/clocksource/bcm2835_timer.c

@@ -80,19 +80,24 @@ static irqreturn_t bcm2835_time_interrupt(int irq, void *dev_id)
 	}
 }
 
-static void __init bcm2835_timer_init(struct device_node *node)
+static int __init bcm2835_timer_init(struct device_node *node)
 {
 	void __iomem *base;
 	u32 freq;
-	int irq;
+	int irq, ret;
 	struct bcm2835_timer *timer;
 
 	base = of_iomap(node, 0);
-	if (!base)
-		panic("Can't remap registers");
+	if (!base) {
+		pr_err("Can't remap registers");
+		return -ENXIO;
+	}
 
-	if (of_property_read_u32(node, "clock-frequency", &freq))
-		panic("Can't read clock-frequency");
+	ret = of_property_read_u32(node, "clock-frequency", &freq);
+	if (ret) {
+		pr_err("Can't read clock-frequency");
+		return ret;
+	}
 
 	system_clock = base + REG_COUNTER_LO;
 	sched_clock_register(bcm2835_sched_read, 32, freq);
@@ -101,12 +106,16 @@ static void __init bcm2835_timer_init(struct device_node *node)
 		freq, 300, 32, clocksource_mmio_readl_up);
 
 	irq = irq_of_parse_and_map(node, DEFAULT_TIMER);
-	if (irq <= 0)
-		panic("Can't parse IRQ");
+	if (irq <= 0) {
+		pr_err("Can't parse IRQ");
+		return -EINVAL;
+	}
 
 	timer = kzalloc(sizeof(*timer), GFP_KERNEL);
-	if (!timer)
-		panic("Can't allocate timer struct\n");
+	if (!timer) {
+		pr_err("Can't allocate timer struct\n");
+		return -ENOMEM;
+	}
 
 	timer->control = base + REG_CONTROL;
 	timer->compare = base + REG_COMPARE(DEFAULT_TIMER);
@@ -121,12 +130,17 @@ static void __init bcm2835_timer_init(struct device_node *node)
 	timer->act.dev_id = timer;
 	timer->act.handler = bcm2835_time_interrupt;
 
-	if (setup_irq(irq, &timer->act))
-		panic("Can't set up timer IRQ\n");
+	ret = setup_irq(irq, &timer->act);
+	if (ret) {
+		pr_err("Can't set up timer IRQ\n");
+		return ret;
+	}
 
 	clockevents_config_and_register(&timer->evt, freq, 0xf, 0xffffffff);
 
 	pr_info("bcm2835: system timer (irq = %d)\n", irq);
+
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
 			bcm2835_timer_init);

drivers/clocksource/bcm_kona_timer.c

@@ -20,7 +20,6 @@
 #include <linux/clk.h>
 
 #include <linux/io.h>
-#include <asm/mach/time.h>
 
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -163,16 +162,11 @@ static struct irqaction kona_timer_irq = {
 	.handler = kona_timer_interrupt,
 };
 
-static void __init kona_timer_init(struct device_node *node)
+static int __init kona_timer_init(struct device_node *node)
 {
 	u32 freq;
 	struct clk *external_clk;
 
-	if (!of_device_is_available(node)) {
-		pr_info("Kona Timer v1 marked as disabled in device tree\n");
-		return;
-	}
-
 	external_clk = of_clk_get_by_name(node, NULL);
 
 	if (!IS_ERR(external_clk)) {
@@ -182,7 +176,7 @@ static void __init kona_timer_init(struct device_node *node)
 		arch_timer_rate = freq;
 	} else {
 		pr_err("Kona Timer v1 unable to determine clock-frequency");
-		return;
+		return -EINVAL;
 	}
 
 	/* Setup IRQ numbers */
@@ -196,6 +190,8 @@ static void __init kona_timer_init(struct device_node *node)
 	kona_timer_clockevents_init();
 	setup_irq(timers.tmr_irq, &kona_timer_irq);
 	kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
+
+	return 0;
 }
 
 CLOCKSOURCE_OF_DECLARE(brcm_kona, "brcm,kona-timer", kona_timer_init);

drivers/clocksource/cadence_ttc_timer.c

@@ -322,22 +322,22 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }
 
-static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
+static int __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
 					 u32 timer_width)
 {
 	struct ttc_timer_clocksource *ttccs;
 	int err;
 
 	ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
-	if (WARN_ON(!ttccs))
-		return;
+	if (!ttccs)
+		return -ENOMEM;
 
 	ttccs->ttc.clk = clk;
 
 	err = clk_prepare_enable(ttccs->ttc.clk);
-	if (WARN_ON(err)) {
+	if (err) {
 		kfree(ttccs);
-		return;
+		return err;
 	}
 
 	ttccs->ttc.freq = clk_get_rate(ttccs->ttc.clk);
@@ -345,8 +345,10 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
 	ttccs->ttc.clk_rate_change_nb.notifier_call =
 		ttc_rate_change_clocksource_cb;
 	ttccs->ttc.clk_rate_change_nb.next = NULL;
-	if (clk_notifier_register(ttccs->ttc.clk,
-				&ttccs->ttc.clk_rate_change_nb))
+
+	err = clk_notifier_register(ttccs->ttc.clk,
+				    &ttccs->ttc.clk_rate_change_nb);
+	if (err)
 		pr_warn("Unable to register clock notifier.\n");
 
 	ttccs->ttc.base_addr = base;
@@ -368,14 +370,16 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
 		     ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
 
 	err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
-	if (WARN_ON(err)) {
+	if (err) {
 		kfree(ttccs);
-		return;
+		return err;
 	}
 
 	ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
 	sched_clock_register(ttc_sched_clock_read, timer_width,
 			     ttccs->ttc.freq / PRESCALE);
+
+	return 0;
 }
 
 static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
@@ -401,30 +405,35 @@ static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
 	}
 }
 
-static void __init ttc_setup_clockevent(struct clk *clk,
-						void __iomem *base, u32 irq)
+static int __init ttc_setup_clockevent(struct clk *clk,
+				       void __iomem *base, u32 irq)
 {
 	struct ttc_timer_clockevent *ttcce;
 	int err;
 
 	ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
-	if (WARN_ON(!ttcce))
-		return;
+	if (!ttcce)
+		return -ENOMEM;
 
 	ttcce->ttc.clk = clk;
 
 	err = clk_prepare_enable(ttcce->ttc.clk);
-	if (WARN_ON(err)) {
+	if (err) {
 		kfree(ttcce);
-		return;
+		return err;
 	}
 
 	ttcce->ttc.clk_rate_change_nb.notifier_call =
 		ttc_rate_change_clockevent_cb;
 	ttcce->ttc.clk_rate_change_nb.next = NULL;
-	if (clk_notifier_register(ttcce->ttc.clk,
-				&ttcce->ttc.clk_rate_change_nb))
+
+	err = clk_notifier_register(ttcce->ttc.clk,
+				    &ttcce->ttc.clk_rate_change_nb);
+	if (err) {
 		pr_warn("Unable to register clock notifier.\n");
+		return err;
+	}
+
 	ttcce->ttc.freq = clk_get_rate(ttcce->ttc.clk);
 
 	ttcce->ttc.base_addr = base;
@@ -451,13 +460,15 @@ static void __init ttc_setup_clockevent(struct clk *clk,
 
 	err = request_irq(irq, ttc_clock_event_interrupt,
 			  IRQF_TIMER, ttcce->ce.name, ttcce);
-	if (WARN_ON(err)) {
+	if (err) {
 		kfree(ttcce);
-		return;
+		return err;
 	}
 
 	clockevents_config_and_register(&ttcce->ce,
 			ttcce->ttc.freq / PRESCALE, 1, 0xfffe);
+
+	return 0;
 }
 
 /**
@@ -466,17 +477,17 @@ static void __init ttc_setup_clockevent(struct clk *clk,
  * Initializes the timer hardware and register the clock source and clock event
  * timers with Linux kernal timer framework
  */
-static void __init ttc_timer_init(struct device_node *timer)
+static int __init ttc_timer_init(struct device_node *timer)
 {
 	unsigned int irq;
 	void __iomem *timer_baseaddr;
 	struct clk *clk_cs, *clk_ce;
 	static int initialized;
-	int clksel;
+	int clksel, ret;
 	u32 timer_width = 16;
 
 	if (initialized)
-		return;
+		return 0;
 
 	initialized = 1;
 
@@ -488,13 +499,13 @@ static void __init ttc_timer_init(struct device_node *timer)
 	timer_baseaddr = of_iomap(timer, 0);
 	if (!timer_baseaddr) {
 		pr_err("ERROR: invalid timer base address\n");
-		BUG();
+		return -ENXIO;
 	}
 
 	irq = irq_of_parse_and_map(timer, 1);
 	if (irq <= 0) {
 		pr_err("ERROR: invalid interrupt number\n");
-		BUG();
+		return -EINVAL;
 	}
 
 	of_property_read_u32(timer, "timer-width", &timer_width);
@@ -504,7 +515,7 @@ static void __init ttc_timer_init(struct device_node *timer)
 	clk_cs = of_clk_get(timer, clksel);
 	if (IS_ERR(clk_cs)) {
 		pr_err("ERROR: timer input clock not found\n");
-		BUG();
+		return PTR_ERR(clk_cs);
 	}
 
 	clksel = readl_relaxed(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET);
@@ -512,13 +523,20 @@ static void __init ttc_timer_init(struct device_node *timer)
 	clk_ce = of_clk_get(timer, clksel);
 	if (IS_ERR(clk_ce)) {
 		pr_err("ERROR: timer input clock not found\n");
-		BUG();
+		return PTR_ERR(clk_ce);
 	}
 
-	ttc_setup_clocksource(clk_cs, timer_baseaddr, timer_width);
-	ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq);
+	ret = ttc_setup_clocksource(clk_cs, timer_baseaddr, timer_width);
+	if (ret)
+		return ret;
+
+	ret = ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq);
+	if (ret)
+		return ret;
 
 	pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq);
+
+	return 0;
 }
 
 CLOCKSOURCE_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);

drivers/clocksource/clksrc-dbx500-prcmu.c

@@ -64,7 +64,7 @@ static u64 notrace dbx500_prcmu_sched_clock_read(void)
 
 #endif
 
-static void __init clksrc_dbx500_prcmu_init(struct device_node *node)
+static int __init clksrc_dbx500_prcmu_init(struct device_node *node)
 {
 	clksrc_dbx500_timer_base = of_iomap(node, 0);
 
@@ -84,7 +84,7 @@ static void __init clksrc_dbx500_prcmu_init(struct device_node *node)
 #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
 	sched_clock_register(dbx500_prcmu_sched_clock_read, 32, RATE_32K);
 #endif
-	clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K);
+	return clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K);
 }
 CLOCKSOURCE_OF_DECLARE(dbx500_prcmu, "stericsson,db8500-prcmu-timer-4",
 		       clksrc_dbx500_prcmu_init);

drivers/clocksource/clksrc-probe.c

@@ -28,15 +28,23 @@ void __init clocksource_probe(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match;
-	of_init_fn_1 init_func;
+	of_init_fn_1_ret init_func_ret;
 	unsigned clocksources = 0;
+	int ret;
 
 	for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
 		if (!of_device_is_available(np))
 			continue;
 
-		init_func = match->data;
-		init_func(np);
+		init_func_ret = match->data;
+
+		ret = init_func_ret(np);
+		if (ret) {
+			pr_err("Failed to initialize '%s': %d",
+			       of_node_full_name(np), ret);
+			continue;
+		}
+
 		clocksources++;
 	}
 

drivers/clocksource/clksrc_st_lpc.c

@@ -92,7 +92,7 @@ static int __init st_clksrc_setup_clk(struct device_node *np)
 	return 0;
 }
 
-static void __init st_clksrc_of_register(struct device_node *np)
+static int __init st_clksrc_of_register(struct device_node *np)
 {
 	int ret;
 	uint32_t mode;
@@ -100,32 +100,36 @@ static void __init st_clksrc_of_register(struct device_node *np)
 	ret = of_property_read_u32(np, "st,lpc-mode", &mode);
 	if (ret) {
 		pr_err("clksrc-st-lpc: An LPC mode must be provided\n");
-		return;
+		return ret;
 	}
 
 	/* LPC can either run as a Clocksource or in RTC or WDT mode */
 	if (mode != ST_LPC_MODE_CLKSRC)
-		return;
+		return 0;
 
 	ddata.base = of_iomap(np, 0);
 	if (!ddata.base) {
 		pr_err("clksrc-st-lpc: Unable to map iomem\n");
-		return;
+		return -ENXIO;
 	}
 
-	if (st_clksrc_setup_clk(np)) {
+	ret = st_clksrc_setup_clk(np);
+	if (ret) {
 		iounmap(ddata.base);
-		return;
+		return ret;
 	}
 
-	if (st_clksrc_init()) {
+	ret = st_clksrc_init();
+	if (ret) {
 		clk_disable_unprepare(ddata.clk);
 		clk_put(ddata.clk);
 		iounmap(ddata.base);
-		return;
+		return ret;
 	}
 
 	pr_info("clksrc-st-lpc: clocksource initialised - running @ %luHz\n",
 		clk_get_rate(ddata.clk));
+
+	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(ddata, "st,stih407-lpc", st_clksrc_of_register);

drivers/clocksource/clps711x-timer.c

@@ -104,7 +104,7 @@ void __init clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base,
 }
 
 #ifdef CONFIG_CLKSRC_OF
-static void __init clps711x_timer_init(struct device_node *np)
+static int __init clps711x_timer_init(struct device_node *np)
 {
 	unsigned int irq = irq_of_parse_and_map(np, 0);
 	struct clk *clock = of_clk_get(np, 0);
@@ -112,13 +112,11 @@ static void __init clps711x_timer_init(struct device_node *np)
 
 	switch (of_alias_get_id(np, "timer")) {
 	case CLPS711X_CLKSRC_CLOCKSOURCE:
-		BUG_ON(_clps711x_clksrc_init(clock, base));
-		break;
+		return _clps711x_clksrc_init(clock, base);
 	case CLPS711X_CLKSRC_CLOCKEVENT:
-		BUG_ON(_clps711x_clkevt_init(clock, base, irq));
-		break;
+		return _clps711x_clkevt_init(clock, base, irq);
 	default:
-		break;
+		return -EINVAL;
 	}
 }
 CLOCKSOURCE_OF_DECLARE(clps711x, "cirrus,clps711x-timer", clps711x_timer_init);

drivers/clocksource/dw_apb_timer_of.c

@@ -143,7 +143,7 @@ static struct delay_timer dw_apb_delay_timer = {
 #endif
 
 static int num_called;
-static void __init dw_apb_timer_init(struct device_node *timer)
+static int __init dw_apb_timer_init(struct device_node *timer)
 {
 	switch (num_called) {
 	case 0:
@@ -164,6 +164,8 @@ static void __init dw_apb_timer_init(struct device_node *timer)
 	}
 
 	num_called++;
+
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
 CLOCKSOURCE_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);

drivers/clocksource/exynos_mct.c

@@ -232,7 +232,7 @@ static cycles_t exynos4_read_current_timer(void)
 	return exynos4_read_count_32();
 }
 
-static void __init exynos4_clocksource_init(void)
+static int __init exynos4_clocksource_init(void)
 {
 	exynos4_mct_frc_start();
 
@@ -244,6 +244,8 @@ static void __init exynos4_clocksource_init(void)
 		panic("%s: can't register clocksource\n", mct_frc.name);
 
 	sched_clock_register(exynos4_read_sched_clock, 32, clk_rate);
+
+	return 0;
 }
 
 static void exynos4_mct_comp0_stop(void)
@@ -335,12 +337,14 @@ static struct irqaction mct_comp_event_irq = {
 	.dev_id		= &mct_comp_device,
 };
 
-static void exynos4_clockevent_init(void)
+static int exynos4_clockevent_init(void)
 {
 	mct_comp_device.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&mct_comp_device, clk_rate,
 					0xf, 0xffffffff);
 	setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
+
+	return 0;
 }
 
 static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
@@ -516,7 +520,7 @@ static struct notifier_block exynos4_mct_cpu_nb = {
 	.notifier_call = exynos4_mct_cpu_notify,
 };
 
-static void __init exynos4_timer_resources(struct device_node *np, void __iomem *base)
+static int __init exynos4_timer_resources(struct device_node *np, void __iomem *base)
 {
 	int err, cpu;
 	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
@@ -572,15 +576,17 @@ static void __init exynos4_timer_resources(struct device_node *np, void __iomem
 
 	/* Immediately configure the timer on the boot CPU */
 	exynos4_local_timer_setup(mevt);
-	return;
+	return 0;
 
 out_irq:
 	free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
+	return err;
 }
 
-static void __init mct_init_dt(struct device_node *np, unsigned int int_type)
+static int __init mct_init_dt(struct device_node *np, unsigned int int_type)
 {
 	u32 nr_irqs, i;
+	int ret;
 
 	mct_int_type = int_type;
 
@@ -600,18 +606,24 @@ static void __init mct_init_dt(struct device_node *np, unsigned int int_type)
 	for (i = MCT_L0_IRQ; i < nr_irqs; i++)
 		mct_irqs[i] = irq_of_parse_and_map(np, i);
 
-	exynos4_timer_resources(np, of_iomap(np, 0));
-	exynos4_clocksource_init();
-	exynos4_clockevent_init();
+	ret = exynos4_timer_resources(np, of_iomap(np, 0));
+	if (ret)
+		return ret;
+
+	ret = exynos4_clocksource_init();
+	if (ret)
+		return ret;
+
+	return exynos4_clockevent_init();
 }
 
 
-static void __init mct_init_spi(struct device_node *np)
+static int __init mct_init_spi(struct device_node *np)
 {
 	return mct_init_dt(np, MCT_INT_SPI);
 }
 
-static void __init mct_init_ppi(struct device_node *np)
+static int __init mct_init_ppi(struct device_node *np)
 {
 	return mct_init_dt(np, MCT_INT_PPI);
 }

drivers/clocksource/fsl_ftm_timer.c

@@ -316,15 +316,16 @@ static int __init ftm_calc_closest_round_cyc(unsigned long freq)
 	return 0;
 }
 
-static void __init ftm_timer_init(struct device_node *np)
+static int __init ftm_timer_init(struct device_node *np)
 {
 	unsigned long freq;
-	int irq;
+	int ret, irq;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
-		return;
+		return -ENOMEM;
 
+	ret = -ENXIO;
 	priv->clkevt_base = of_iomap(np, 0);
 	if (!priv->clkevt_base) {
 		pr_err("ftm: unable to map event timer registers\n");
@@ -337,6 +338,7 @@ static void __init ftm_timer_init(struct device_node *np)
 		goto err;
 	}
 
+	ret = -EINVAL;
 	irq = irq_of_parse_and_map(np, 0);
 	if (irq <= 0) {
 		pr_err("ftm: unable to get IRQ from DT, %d\n", irq);
@@ -349,18 +351,22 @@ static void __init ftm_timer_init(struct device_node *np)
 	if (!freq)
 		goto err;
 
-	if (ftm_calc_closest_round_cyc(freq))
+	ret = ftm_calc_closest_round_cyc(freq);
+	if (ret)
 		goto err;
 
-	if (ftm_clocksource_init(freq))
+	ret = ftm_clocksource_init(freq);
+	if (ret)
 		goto err;
 
-	if (ftm_clockevent_init(freq, irq))
+	ret = ftm_clockevent_init(freq, irq);
+	if (ret)
 		goto err;
 
-	return;
+	return 0;
 
 err:
 	kfree(priv);
+	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(flextimer, "fsl,ftm-timer", ftm_timer_init);

drivers/clocksource/h8300_timer16.c

@@ -126,7 +126,7 @@ static struct timer16_priv timer16_priv = {
 #define REG_CH   0
 #define REG_COMM 1
 
-static void __init h8300_16timer_init(struct device_node *node)
+static int __init h8300_16timer_init(struct device_node *node)
 {
 	void __iomem *base[2];
 	int ret, irq;
@@ -136,9 +136,10 @@ static void __init h8300_16timer_init(struct device_node *node)
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
 		pr_err("failed to get clock for clocksource\n");
-		return;
+		return PTR_ERR(clk);
 	}
 
+	ret = -ENXIO;
 	base[REG_CH] = of_iomap(node, 0);
 	if (!base[REG_CH]) {
 		pr_err("failed to map registers for clocksource\n");
@@ -151,6 +152,7 @@ static void __init h8300_16timer_init(struct device_node *node)
 		goto unmap_ch;
 	}
 
+	ret = -EINVAL;
 	irq = irq_of_parse_and_map(node, 0);
 	if (!irq) {
 		pr_err("failed to get irq for clockevent\n");
@@ -174,7 +176,7 @@ static void __init h8300_16timer_init(struct device_node *node)
 
 	clocksource_register_hz(&timer16_priv.cs,
 				clk_get_rate(clk) / 8);
-	return;
+	return 0;
 
 unmap_comm:
 	iounmap(base[REG_COMM]);
@@ -182,6 +184,8 @@ static void __init h8300_16timer_init(struct device_node *node)
 	iounmap(base[REG_CH]);
 free_clk:
 	clk_put(clk);
+	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer",
+			   h8300_16timer_init);

drivers/clocksource/h8300_timer8.c

@@ -164,24 +164,26 @@ static struct timer8_priv timer8_priv = {
 	},
 };
 
-static void __init h8300_8timer_init(struct device_node *node)
+static int __init h8300_8timer_init(struct device_node *node)
 {
 	void __iomem *base;
-	int irq;
+	int irq, ret;
 	struct clk *clk;
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
 		pr_err("failed to get clock for clockevent\n");
-		return;
+		return PTR_ERR(clk);
 	}
 
+	ret = ENXIO;
 	base = of_iomap(node, 0);
 	if (!base) {
 		pr_err("failed to map registers for clockevent\n");
 		goto free_clk;
 	}
 
+	ret = -EINVAL;
 	irq = irq_of_parse_and_map(node, 0);
 	if (!irq) {
 		pr_err("failed to get irq for clockevent\n");
@@ -205,11 +207,12 @@ static void __init h8300_8timer_init(struct device_node *node)
 	clockevents_config_and_register(&timer8_priv.ced,
 					timer8_priv.rate, 1, 0x0000ffff);
 
-	return;
+	return 0;
 unmap_reg:
 	iounmap(base);
 free_clk:
 	clk_put(clk);
+	return ret;
 }
 
 CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);

drivers/clocksource/h8300_tpu.c

@@ -119,15 +119,16 @@ static struct tpu_priv tpu_priv = {
 #define CH_L 0
 #define CH_H 1
 
-static void __init h8300_tpu_init(struct device_node *node)
+static int __init h8300_tpu_init(struct device_node *node)
 {
 	void __iomem *base[2];
 	struct clk *clk;
+	int ret = -ENXIO;
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
 		pr_err("failed to get clock for clocksource\n");
-		return;
+		return PTR_ERR(clk);
 	}
 
 	base[CH_L] = of_iomap(node, CH_L);
@@ -144,14 +145,13 @@ static void __init h8300_tpu_init(struct device_node *node)
 	tpu_priv.mapbase1 = base[CH_L];
 	tpu_priv.mapbase2 = base[CH_H];
 
-	clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);
-
-	return;
+	return clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);
 
 unmap_L:
 	iounmap(base[CH_H]);
 free_clk:
 	clk_put(clk);
+	return ret;
 }
 
 CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);

drivers/clocksource/meson6_timer.c

@@ -126,18 +126,22 @@ static struct irqaction meson6_timer_irq = {
 	.dev_id		= &meson6_clockevent,
 };
 
-static void __init meson6_timer_init(struct device_node *node)
+static int __init meson6_timer_init(struct device_node *node)
 {
 	u32 val;
 	int ret, irq;
 
 	timer_base = of_io_request_and_map(node, 0, "meson6-timer");
-	if (IS_ERR(timer_base))
-		panic("Can't map registers");
+	if (IS_ERR(timer_base)) {
+		pr_err("Can't map registers");
+		return -ENXIO;
+	}
 
 	irq = irq_of_parse_and_map(node, 0);
-	if (irq <= 0)
-		panic("Can't parse IRQ");
+	if (irq <= 0) {
+		pr_err("Can't parse IRQ");
+		return -EINVAL;
+	}
 
 	/* Set 1us for timer E */
 	val = readl(timer_base + TIMER_ISA_MUX);
@@ -158,14 +162,17 @@ static void __init meson6_timer_init(struct device_node *node)
 	meson6_clkevt_time_stop(CED_ID);
 
 	ret = setup_irq(irq, &meson6_timer_irq);
-	if (ret)
+	if (ret) {
 		pr_warn("failed to setup irq %d\n", irq);
+		return ret;
+	}
 
 	meson6_clockevent.cpumask = cpu_possible_mask;
 	meson6_clockevent.irq = irq;
 
 	clockevents_config_and_register(&meson6_clockevent, USEC_PER_SEC,
 					1, 0xfffe);
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(meson6, "amlogic,meson6-timer",
 		       meson6_timer_init);

drivers/clocksource/mips-gic-timer.c

@@ -146,7 +146,7 @@ static struct clocksource gic_clocksource = {
 	.archdata	= { .vdso_clock_mode = VDSO_CLOCK_GIC },
 };
 
-static void __init __gic_clocksource_init(void)
+static int __init __gic_clocksource_init(void)
 {
 	int ret;
 
@@ -159,6 +159,8 @@ static void __init __gic_clocksource_init(void)
 	ret = clocksource_register_hz(&gic_clocksource, gic_frequency);
 	if (ret < 0)
 		pr_warn("GIC: Unable to register clocksource\n");
+
+	return ret;
 }
 
 void __init gic_clocksource_init(unsigned int frequency)
@@ -179,31 +181,35 @@ static void __init gic_clocksource_of_init(struct device_node *node)
 	struct clk *clk;
 	int ret;
 
-	if (WARN_ON(!gic_present || !node->parent ||
-		    !of_device_is_compatible(node->parent, "mti,gic")))
-		return;
+	if (!gic_present || !node->parent ||
+	    !of_device_is_compatible(node->parent, "mti,gic")) {
+		pr_warn("No DT definition for the mips gic driver");
+		return -ENXIO;
+	}
 
 	clk = of_clk_get(node, 0);
 	if (!IS_ERR(clk)) {
 		if (clk_prepare_enable(clk) < 0) {
 			pr_err("GIC failed to enable clock\n");
 			clk_put(clk);
-			return;
+			return PTR_ERR(clk);
 		}
 
 		gic_frequency = clk_get_rate(clk);
 	} else if (of_property_read_u32(node, "clock-frequency",
 					&gic_frequency)) {
 		pr_err("GIC frequency not specified.\n");
-		return;
+		return -EINVAL;;
 	}
 	gic_timer_irq = irq_of_parse_and_map(node, 0);
 	if (!gic_timer_irq) {
 		pr_err("GIC timer IRQ not specified.\n");
-		return;
+		return -EINVAL;;
 	}
 
-	__gic_clocksource_init();
+	ret = __gic_clocksource_init();
+	if (ret)
+		return ret;
 
 	ret = gic_clockevent_init();
 	if (!ret && !IS_ERR(clk)) {
@@ -213,6 +219,8 @@ static void __init gic_clocksource_of_init(struct device_node *node)
 
 	/* And finally start the counter */
 	gic_start_count();
+
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
 		       gic_clocksource_of_init);

drivers/clocksource/moxart_timer.c

@@ -119,34 +119,45 @@ static struct irqaction moxart_timer_irq = {
 	.dev_id		= &moxart_clockevent,
 };
 
-static void __init moxart_timer_init(struct device_node *node)
+static int __init moxart_timer_init(struct device_node *node)
 {
 	int ret, irq;
 	unsigned long pclk;
 	struct clk *clk;
 
 	base = of_iomap(node, 0);
-	if (!base)
-		panic("%s: of_iomap failed\n", node->full_name);
+	if (!base) {
+		pr_err("%s: of_iomap failed\n", node->full_name);
+		return -ENXIO;
+	}
 
 	irq = irq_of_parse_and_map(node, 0);
-	if (irq <= 0)
-		panic("%s: irq_of_parse_and_map failed\n", node->full_name);
+	if (irq <= 0) {
+		pr_err("%s: irq_of_parse_and_map failed\n", node->full_name);
+		return -EINVAL;
+	}
 
 	ret = setup_irq(irq, &moxart_timer_irq);
-	if (ret)
-		panic("%s: setup_irq failed\n", node->full_name);
+	if (ret) {
+		pr_err("%s: setup_irq failed\n", node->full_name);
+		return ret;
+	}
 
 	clk = of_clk_get(node, 0);
-	if (IS_ERR(clk))
-		panic("%s: of_clk_get failed\n", node->full_name);
+	if (IS_ERR(clk))  {
+		pr_err("%s: of_clk_get failed\n", node->full_name);
+		return PTR_ERR(clk);
+	}
 
 	pclk = clk_get_rate(clk);
 
-	if (clocksource_mmio_init(base + TIMER2_BASE + REG_COUNT,
-				  "moxart_timer", pclk, 200, 32,
-				  clocksource_mmio_readl_down))
-		panic("%s: clocksource_mmio_init failed\n", node->full_name);
+	ret = clocksource_mmio_init(base + TIMER2_BASE + REG_COUNT,
+				    "moxart_timer", pclk, 200, 32,
+				    clocksource_mmio_readl_down);
+	if (ret) {
+		pr_err("%s: clocksource_mmio_init failed\n", node->full_name);
+		return ret;
+	}
 
 	clock_count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ);
 
@@ -164,5 +175,7 @@ static void __init moxart_timer_init(struct device_node *node)
 	 */
 	clockevents_config_and_register(&moxart_clockevent, pclk,
 					0x4, 0xfffffffe);
+
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init);

drivers/clocksource/mps2-timer.c

@@ -250,7 +250,7 @@ static int __init mps2_clocksource_init(struct device_node *np)
 	return ret;
 }
 
-static void __init mps2_timer_init(struct device_node *np)
+static int __init mps2_timer_init(struct device_node *np)
 {
 	static int has_clocksource, has_clockevent;
 	int ret;
@@ -259,7 +259,7 @@ static void __init mps2_timer_init(struct device_node *np)
 		ret = mps2_clocksource_init(np);
 		if (!ret) {
 			has_clocksource = 1;
-			return;
+			return 0;
 		}
 	}
 
@@ -267,9 +267,11 @@ static void __init mps2_timer_init(struct device_node *np)
 		ret = mps2_clockevent_init(np);
 		if (!ret) {
 			has_clockevent = 1;
-			return;
+			return 0;
 		}
 	}
+
+	return 0;
 }
 
 CLOCKSOURCE_OF_DECLARE(mps2_timer, "arm,mps2-timer", mps2_timer_init);

drivers/clocksource/mtk_timer.c

@@ -181,7 +181,7 @@ static void mtk_timer_enable_irq(struct mtk_clock_event_device *evt, u8 timer)
 			evt->gpt_base + GPT_IRQ_EN_REG);
 }
 
-static void __init mtk_timer_init(struct device_node *node)
+static int __init mtk_timer_init(struct device_node *node)
 {
 	struct mtk_clock_event_device *evt;
 	struct resource res;
@@ -190,7 +190,7 @@ static void __init mtk_timer_init(struct device_node *node)
 
 	evt = kzalloc(sizeof(*evt), GFP_KERNEL);
 	if (!evt)
-		return;
+		return -ENOMEM;
 
 	evt->dev.name = "mtk_tick";
 	evt->dev.rating = 300;
@@ -248,7 +248,7 @@ static void __init mtk_timer_init(struct device_node *node)
 
 	mtk_timer_enable_irq(evt, GPT_CLK_EVT);
 
-	return;
+	return 0;
 
 err_clk_disable:
 	clk_disable_unprepare(clk);
@@ -262,5 +262,7 @@ static void __init mtk_timer_init(struct device_node *node)
 	release_mem_region(res.start, resource_size(&res));
 err_kzalloc:
 	kfree(evt);
+
+	return -EINVAL;
 }
 CLOCKSOURCE_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_timer_init);

drivers/clocksource/mxs_timer.c

@@ -31,8 +31,6 @@
 #include <linux/stmp_device.h>
 #include <linux/sched_clock.h>
 
-#include <asm/mach/time.h>
-
 /*
  * There are 2 versions of the timrot on Freescale MXS-based SoCs.
  * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
@@ -226,10 +224,10 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
 	return 0;
 }
 
-static void __init mxs_timer_init(struct device_node *np)
+static int __init mxs_timer_init(struct device_node *np)
 {
 	struct clk *timer_clk;
-	int irq;
+	int irq, ret;
 
 	mxs_timrot_base = of_iomap(np, 0);
 	WARN_ON(!mxs_timrot_base);
@@ -237,10 +235,12 @@ static void __init mxs_timer_init(struct device_node *np)
 	timer_clk = of_clk_get(np, 0);
 	if (IS_ERR(timer_clk)) {
 		pr_err("%s: failed to get clk\n", __func__);
-		return;
+		return PTR_ERR(timer_clk);
 	}
 
-	clk_prepare_enable(timer_clk);
+	ret = clk_prepare_enable(timer_clk);
+	if (ret)
+		return ret;
 
 	/*
 	 * Initialize timers to a known state
@@ -278,11 +278,19 @@ static void __init mxs_timer_init(struct device_node *np)
 			mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
 
 	/* init and register the timer to the framework */
-	mxs_clocksource_init(timer_clk);
-	mxs_clockevent_init(timer_clk);
+	ret = mxs_clocksource_init(timer_clk);
+	if (ret)
+		return ret;
+
+	ret = mxs_clockevent_init(timer_clk);
+	if (ret)
+		return ret;
 
 	/* Make irqs happen */
 	irq = irq_of_parse_and_map(np, 0);
-	setup_irq(irq, &mxs_timer_irq);
+	if (irq <= 0)
+		return -EINVAL;
+
+	return setup_irq(irq, &mxs_timer_irq);
 }
 CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);

drivers/clocksource/nomadik-mtu.c

@@ -193,10 +193,11 @@ static struct irqaction nmdk_timer_irq = {
 	.dev_id		= &nmdk_clkevt,
 };
 
-static void __init nmdk_timer_init(void __iomem *base, int irq,
+static int __init nmdk_timer_init(void __iomem *base, int irq,
 				   struct clk *pclk, struct clk *clk)
 {
 	unsigned long rate;
+	int ret;
 
 	mtu_base = base;
 
@@ -226,10 +227,12 @@ static void __init nmdk_timer_init(void __iomem *base, int irq,
 	/* Timer 0 is the free running clocksource */
 	nmdk_clksrc_reset();
 
-	if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
-			rate, 200, 32, clocksource_mmio_readl_down))
-		pr_err("timer: failed to initialize clock source %s\n",
-		       "mtu_0");
+	ret = clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
+				    rate, 200, 32, clocksource_mmio_readl_down);
+	if (ret) {
+		pr_err("timer: failed to initialize clock source %s\n", "mtu_0");
+		return ret;
+	}
 
 #ifdef CONFIG_CLKSRC_NOMADIK_MTU_SCHED_CLOCK
 	sched_clock_register(nomadik_read_sched_clock, 32, rate);
@@ -244,9 +247,11 @@ static void __init nmdk_timer_init(void __iomem *base, int irq,
 	mtu_delay_timer.read_current_timer = &nmdk_timer_read_current_timer;
 	mtu_delay_timer.freq = rate;
 	register_current_timer_delay(&mtu_delay_timer);
+
+	return 0;
 }
 
-static void __init nmdk_timer_of_init(struct device_node *node)
+static int __init nmdk_timer_of_init(struct device_node *node)
 {
 	struct clk *pclk;
 	struct clk *clk;
@@ -254,22 +259,30 @@ static void __init nmdk_timer_of_init(struct device_node *node)
 	int irq;
 
 	base = of_iomap(node, 0);
-	if (!base)
-		panic("Can't remap registers");
+	if (!base) {
+		pr_err("Can't remap registers");
+		return -ENXIO;
+	}
 
 	pclk = of_clk_get_by_name(node, "apb_pclk");
-	if (IS_ERR(pclk))
-		panic("could not get apb_pclk");
+	if (IS_ERR(pclk)) {
+		pr_err("could not get apb_pclk");
+		return PTR_ERR(pclk);
+	}
 
 	clk = of_clk_get_by_name(node, "timclk");
-	if (IS_ERR(clk))
-		panic("could not get timclk");
+	if (IS_ERR(clk)) {
+		pr_err("could not get timclk");
+		return PTR_ERR(clk);
+	}
 
 	irq = irq_of_parse_and_map(node, 0);
-	if (irq <= 0)
-		panic("Can't parse IRQ");
+	if (irq <= 0) {
+		pr_err("Can't parse IRQ");
+		return -EINVAL;
+	}
 
-	nmdk_timer_init(base, irq, pclk, clk);
+	return nmdk_timer_init(base, irq, pclk, clk);
 }
 CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",
 		       nmdk_timer_of_init);

drivers/clocksource/pxa_timer.c

@@ -150,8 +150,10 @@ static struct irqaction pxa_ost0_irq = {
 	.dev_id		= &ckevt_pxa_osmr0,
 };
 
-static void __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
+static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
 {
+	int ret;
+
 	timer_writel(0, OIER);
 	timer_writel(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
 
@@ -159,39 +161,57 @@ static void __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
 
 	ckevt_pxa_osmr0.cpumask = cpumask_of(0);
 
-	setup_irq(irq, &pxa_ost0_irq);
+	ret = setup_irq(irq, &pxa_ost0_irq);
+	if (ret) {
+		pr_err("Failed to setup irq");
+		return ret;
+	}
+
+	ret = clocksource_mmio_init(timer_base + OSCR, "oscr0", clock_tick_rate, 200,
+				    32, clocksource_mmio_readl_up);
+	if (ret) {
+		pr_err("Failed to init clocksource");
+		return ret;
+	}
 
-	clocksource_mmio_init(timer_base + OSCR, "oscr0", clock_tick_rate, 200,
-			      32, clocksource_mmio_readl_up);
 	clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate,
 					MIN_OSCR_DELTA * 2, 0x7fffffff);
+
+	return 0;
 }
 
-static void __init pxa_timer_dt_init(struct device_node *np)
+static int __init pxa_timer_dt_init(struct device_node *np)
 {
 	struct clk *clk;
-	int irq;
+	int irq, ret;
 
 	/* timer registers are shared with watchdog timer */
 	timer_base = of_iomap(np, 0);
-	if (!timer_base)
-		panic("%s: unable to map resource\n", np->name);
+	if (!timer_base) {
+		pr_err("%s: unable to map resource\n", np->name);
+		return -ENXIO;
+	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
 		pr_crit("%s: unable to get clk\n", np->name);
-		return;
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_crit("Failed to prepare clock");
+		return ret;
 	}
-	clk_prepare_enable(clk);
 
 	/* we are only interested in OS-timer0 irq */
 	irq = irq_of_parse_and_map(np, 0);
 	if (irq <= 0) {
 		pr_crit("%s: unable to parse OS-timer0 irq\n", np->name);
-		return;
+		return -EINVAL;
 	}
 
-	pxa_timer_common_init(irq, clk_get_rate(clk));
+	return pxa_timer_common_init(irq, clk_get_rate(clk));
 }
 CLOCKSOURCE_OF_DECLARE(pxa_timer, "marvell,pxa-timer", pxa_timer_dt_init);
 

drivers/clocksource/qcom-timer.c

@@ -178,7 +178,7 @@ static struct delay_timer msm_delay_timer = {
 	.read_current_timer = msm_read_current_timer,
 };
 
-static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
+static int __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
 				  bool percpu)
 {
 	struct clocksource *cs = &msm_clocksource;
@@ -218,12 +218,14 @@ static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
 	sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
 	msm_delay_timer.freq = dgt_hz;
 	register_current_timer_delay(&msm_delay_timer);
+
+	return res;
 }
 
-static void __init msm_dt_timer_init(struct device_node *np)
+static int __init msm_dt_timer_init(struct device_node *np)
 {
 	u32 freq;
-	int irq;
+	int irq, ret;
 	struct resource res;
 	u32 percpu_offset;
 	void __iomem *base;
@@ -232,34 +234,35 @@ static void __init msm_dt_timer_init(struct device_node *np)
 	base = of_iomap(np, 0);
 	if (!base) {
 		pr_err("Failed to map event base\n");
-		return;
+		return -ENXIO;
 	}
 
 	/* We use GPT0 for the clockevent */
 	irq = irq_of_parse_and_map(np, 1);
 	if (irq <= 0) {
 		pr_err("Can't get irq\n");
-		return;
+		return -EINVAL;
 	}
 
 	/* We use CPU0's DGT for the clocksource */
 	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
 		percpu_offset = 0;
 
-	if (of_address_to_resource(np, 0, &res)) {
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret) {
 		pr_err("Failed to parse DGT resource\n");
-		return;
+		return ret;
 	}
 
 	cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res));
 	if (!cpu0_base) {
 		pr_err("Failed to map source base\n");
-		return;
+		return -EINVAL;
 	}
 
 	if (of_property_read_u32(np, "clock-frequency", &freq)) {
 		pr_err("Unknown frequency\n");
-		return;
+		return -EINVAL;
 	}
 
 	event_base = base + 0x4;
@@ -268,7 +271,7 @@ static void __init msm_dt_timer_init(struct device_node *np)
 	freq /= 4;
 	writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL);
 
-	msm_timer_init(freq, 32, irq, !!percpu_offset);
+	return msm_timer_init(freq, 32, irq, !!percpu_offset);
 }
 CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
 CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);

drivers/clocksource/rockchip_timer.c

@@ -19,7 +19,8 @@
 
 #define TIMER_LOAD_COUNT0	0x00
 #define TIMER_LOAD_COUNT1	0x04
-#define TIMER_CONTROL_REG	0x10
+#define TIMER_CONTROL_REG3288	0x10
+#define TIMER_CONTROL_REG3399	0x1c
 #define TIMER_INT_STATUS	0x18
 
 #define TIMER_DISABLE		0x0
@@ -31,6 +32,7 @@
 struct bc_timer {
 	struct clock_event_device ce;
 	void __iomem *base;
+	void __iomem *ctrl;
 	u32 freq;
 };
 
@@ -46,15 +48,20 @@ static inline void __iomem *rk_base(struct clock_event_device *ce)
 	return rk_timer(ce)->base;
 }
 
+static inline void __iomem *rk_ctrl(struct clock_event_device *ce)
+{
+	return rk_timer(ce)->ctrl;
+}
+
 static inline void rk_timer_disable(struct clock_event_device *ce)
 {
-	writel_relaxed(TIMER_DISABLE, rk_base(ce) + TIMER_CONTROL_REG);
+	writel_relaxed(TIMER_DISABLE, rk_ctrl(ce));
 }
 
 static inline void rk_timer_enable(struct clock_event_device *ce, u32 flags)
 {
 	writel_relaxed(TIMER_ENABLE | TIMER_INT_UNMASK | flags,
-		       rk_base(ce) + TIMER_CONTROL_REG);
+		       rk_ctrl(ce));
 }
 
 static void rk_timer_update_counter(unsigned long cycles,
@@ -106,37 +113,42 @@ static irqreturn_t rk_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void __init rk_timer_init(struct device_node *np)
+static int __init rk_timer_init(struct device_node *np, u32 ctrl_reg)
 {
 	struct clock_event_device *ce = &bc_timer.ce;
 	struct clk *timer_clk;
 	struct clk *pclk;
-	int ret, irq;
+	int ret = -EINVAL, irq;
 
 	bc_timer.base = of_iomap(np, 0);
 	if (!bc_timer.base) {
 		pr_err("Failed to get base address for '%s'\n", TIMER_NAME);
-		return;
+		return -ENXIO;
 	}
+	bc_timer.ctrl = bc_timer.base + ctrl_reg;
 
 	pclk = of_clk_get_by_name(np, "pclk");
 	if (IS_ERR(pclk)) {
+		ret = PTR_ERR(pclk);
 		pr_err("Failed to get pclk for '%s'\n", TIMER_NAME);
 		goto out_unmap;
 	}
 
-	if (clk_prepare_enable(pclk)) {
+	ret = clk_prepare_enable(pclk);
+	if (ret) {
 		pr_err("Failed to enable pclk for '%s'\n", TIMER_NAME);
 		goto out_unmap;
 	}
 
 	timer_clk = of_clk_get_by_name(np, "timer");
 	if (IS_ERR(timer_clk)) {
+		ret = PTR_ERR(timer_clk);
 		pr_err("Failed to get timer clock for '%s'\n", TIMER_NAME);
 		goto out_timer_clk;
 	}
 
-	if (clk_prepare_enable(timer_clk)) {
+	ret = clk_prepare_enable(timer_clk);
+	if (ret) {
 		pr_err("Failed to enable timer clock\n");
 		goto out_timer_clk;
 	}
@@ -145,17 +157,19 @@ static void __init rk_timer_init(struct device_node *np)
 
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
+		ret = -EINVAL;
 		pr_err("Failed to map interrupts for '%s'\n", TIMER_NAME);
 		goto out_irq;
 	}
 
 	ce->name = TIMER_NAME;
-	ce->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	ce->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+		       CLOCK_EVT_FEAT_DYNIRQ;
 	ce->set_next_event = rk_timer_set_next_event;
 	ce->set_state_shutdown = rk_timer_shutdown;
 	ce->set_state_periodic = rk_timer_set_periodic;
 	ce->irq = irq;
-	ce->cpumask = cpumask_of(0);
+	ce->cpumask = cpu_possible_mask;
 	ce->rating = 250;
 
 	rk_timer_interrupt_clear(ce);
@@ -169,7 +183,7 @@ static void __init rk_timer_init(struct device_node *np)
 
 	clockevents_config_and_register(ce, bc_timer.freq, 1, UINT_MAX);
 
-	return;
+	return 0;
 
 out_irq:
 	clk_disable_unprepare(timer_clk);
@@ -177,6 +191,21 @@ static void __init rk_timer_init(struct device_node *np)
 	clk_disable_unprepare(pclk);
 out_unmap:
 	iounmap(bc_timer.base);
+
+	return ret;
+}
+
+static int __init rk3288_timer_init(struct device_node *np)
+{
+	return rk_timer_init(np, TIMER_CONTROL_REG3288);
+}
+
+static int __init rk3399_timer_init(struct device_node *np)
+{
+	return rk_timer_init(np, TIMER_CONTROL_REG3399);
 }
 
-CLOCKSOURCE_OF_DECLARE(rk_timer, "rockchip,rk3288-timer", rk_timer_init);
+CLOCKSOURCE_OF_DECLARE(rk3288_timer, "rockchip,rk3288-timer",
+		       rk3288_timer_init);
+CLOCKSOURCE_OF_DECLARE(rk3399_timer, "rockchip,rk3399-timer",
+		       rk3399_timer_init);

drivers/clocksource/samsung_pwm_timer.c

@@ -130,9 +130,9 @@ static void samsung_time_stop(unsigned int channel)
 
 	spin_lock_irqsave(&samsung_pwm_lock, flags);
 
-	tcon = __raw_readl(pwm.base + REG_TCON);
+	tcon = readl_relaxed(pwm.base + REG_TCON);
 	tcon &= ~TCON_START(channel);
-	__raw_writel(tcon, pwm.base + REG_TCON);
+	writel_relaxed(tcon, pwm.base + REG_TCON);
 
 	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
 }
@@ -148,14 +148,14 @@ static void samsung_time_setup(unsigned int channel, unsigned long tcnt)
 
 	spin_lock_irqsave(&samsung_pwm_lock, flags);
 
-	tcon = __raw_readl(pwm.base + REG_TCON);
+	tcon = readl_relaxed(pwm.base + REG_TCON);
 
 	tcon &= ~(TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan));
 	tcon |= TCON_MANUALUPDATE(tcon_chan);
 
-	__raw_writel(tcnt, pwm.base + REG_TCNTB(channel));
-	__raw_writel(tcnt, pwm.base + REG_TCMPB(channel));
-	__raw_writel(tcon, pwm.base + REG_TCON);
+	writel_relaxed(tcnt, pwm.base + REG_TCNTB(channel));
+	writel_relaxed(tcnt, pwm.base + REG_TCMPB(channel));
+	writel_relaxed(tcon, pwm.base + REG_TCON);
 
 	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
 }
@@ -170,7 +170,7 @@ static void samsung_time_start(unsigned int channel, bool periodic)
 
 	spin_lock_irqsave(&samsung_pwm_lock, flags);
 
-	tcon = __raw_readl(pwm.base + REG_TCON);
+	tcon = readl_relaxed(pwm.base + REG_TCON);
 
 	tcon &= ~TCON_MANUALUPDATE(channel);
 	tcon |= TCON_START(channel);
@@ -180,7 +180,7 @@ static void samsung_time_start(unsigned int channel, bool periodic)
 	else
 		tcon &= ~TCON_AUTORELOAD(channel);
 
-	__raw_writel(tcon, pwm.base + REG_TCON);
+	writel_relaxed(tcon, pwm.base + REG_TCON);
 
 	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
 }
@@ -333,11 +333,10 @@ static u64 notrace samsung_read_sched_clock(void)
 	return samsung_clocksource_read(NULL);
 }
 
-static void __init samsung_clocksource_init(void)
+static int __init samsung_clocksource_init(void)
 {
 	unsigned long pclk;
 	unsigned long clock_rate;
-	int ret;
 
 	pclk = clk_get_rate(pwm.timerclk);
 
@@ -358,9 +357,7 @@ static void __init samsung_clocksource_init(void)
 						pwm.variant.bits, clock_rate);
 
 	samsung_clocksource.mask = CLOCKSOURCE_MASK(pwm.variant.bits);
-	ret = clocksource_register_hz(&samsung_clocksource, clock_rate);
-	if (ret)
-		panic("samsung_clocksource_timer: can't register clocksource\n");
+	return clocksource_register_hz(&samsung_clocksource, clock_rate);
 }
 
 static void __init samsung_timer_resources(void)
@@ -380,26 +377,31 @@ static void __init samsung_timer_resources(void)
 /*
  * PWM master driver
  */
-static void __init _samsung_pwm_clocksource_init(void)
+static int __init _samsung_pwm_clocksource_init(void)
 {
 	u8 mask;
 	int channel;
 
 	mask = ~pwm.variant.output_mask & ((1 << SAMSUNG_PWM_NUM) - 1);
 	channel = fls(mask) - 1;
-	if (channel < 0)
-		panic("failed to find PWM channel for clocksource");
+	if (channel < 0) {
+		pr_crit("failed to find PWM channel for clocksource");
+		return -EINVAL;
+	}
 	pwm.source_id = channel;
 
 	mask &= ~(1 << channel);
 	channel = fls(mask) - 1;
-	if (channel < 0)
-		panic("failed to find PWM channel for clock event");
+	if (channel < 0) {
+		pr_crit("failed to find PWM channel for clock event");
+		return -EINVAL;
+	}
 	pwm.event_id = channel;
 
 	samsung_timer_resources();
 	samsung_clockevent_init();
-	samsung_clocksource_init();
+
+	return samsung_clocksource_init();
 }
 
 void __init samsung_pwm_clocksource_init(void __iomem *base,
@@ -417,8 +419,8 @@ void __init samsung_pwm_clocksource_init(void __iomem *base,
 }
 
 #ifdef CONFIG_CLKSRC_OF
-static void __init samsung_pwm_alloc(struct device_node *np,
-				     const struct samsung_pwm_variant *variant)
+static int __init samsung_pwm_alloc(struct device_node *np,
+				    const struct samsung_pwm_variant *variant)
 {
 	struct property *prop;
 	const __be32 *cur;
@@ -441,14 +443,16 @@ static void __init samsung_pwm_alloc(struct device_node *np,
 	pwm.base = of_iomap(np, 0);
 	if (!pwm.base) {
 		pr_err("%s: failed to map PWM registers\n", __func__);
-		return;
+		return -ENXIO;
 	}
 
 	pwm.timerclk = of_clk_get_by_name(np, "timers");
-	if (IS_ERR(pwm.timerclk))
-		panic("failed to get timers clock for timer");
+	if (IS_ERR(pwm.timerclk)) {
+		pr_crit("failed to get timers clock for timer");
+		return PTR_ERR(pwm.timerclk);
+	}
 
-	_samsung_pwm_clocksource_init();
+	return _samsung_pwm_clocksource_init();
 }
 
 static const struct samsung_pwm_variant s3c24xx_variant = {
@@ -458,9 +462,9 @@ static const struct samsung_pwm_variant s3c24xx_variant = {
 	.tclk_mask	= (1 << 4),
 };
 
-static void __init s3c2410_pwm_clocksource_init(struct device_node *np)
+static int __init s3c2410_pwm_clocksource_init(struct device_node *np)
 {
-	samsung_pwm_alloc(np, &s3c24xx_variant);
+	return samsung_pwm_alloc(np, &s3c24xx_variant);
 }
 CLOCKSOURCE_OF_DECLARE(s3c2410_pwm, "samsung,s3c2410-pwm", s3c2410_pwm_clocksource_init);
 
@@ -471,9 +475,9 @@ static const struct samsung_pwm_variant s3c64xx_variant = {
 	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
 };
 
-static void __init s3c64xx_pwm_clocksource_init(struct device_node *np)
+static int __init s3c64xx_pwm_clocksource_init(struct device_node *np)
 {
-	samsung_pwm_alloc(np, &s3c64xx_variant);
+	return samsung_pwm_alloc(np, &s3c64xx_variant);
 }
 CLOCKSOURCE_OF_DECLARE(s3c6400_pwm, "samsung,s3c6400-pwm", s3c64xx_pwm_clocksource_init);
 
@@ -484,9 +488,9 @@ static const struct samsung_pwm_variant s5p64x0_variant = {
 	.tclk_mask	= 0,
 };
 
-static void __init s5p64x0_pwm_clocksource_init(struct device_node *np)
+static int __init s5p64x0_pwm_clocksource_init(struct device_node *np)
 {
-	samsung_pwm_alloc(np, &s5p64x0_variant);
+	return samsung_pwm_alloc(np, &s5p64x0_variant);
 }
 CLOCKSOURCE_OF_DECLARE(s5p6440_pwm, "samsung,s5p6440-pwm", s5p64x0_pwm_clocksource_init);
 
@@ -497,9 +501,9 @@ static const struct samsung_pwm_variant s5p_variant = {
 	.tclk_mask	= (1 << 5),
 };
 
-static void __init s5p_pwm_clocksource_init(struct device_node *np)
+static int __init s5p_pwm_clocksource_init(struct device_node *np)
 {
-	samsung_pwm_alloc(np, &s5p_variant);
+	return samsung_pwm_alloc(np, &s5p_variant);
 }
 CLOCKSOURCE_OF_DECLARE(s5pc100_pwm, "samsung,s5pc100-pwm", s5p_pwm_clocksource_init);
 #endif

drivers/clocksource/sun4i_timer.c

@@ -146,7 +146,7 @@ static u64 notrace sun4i_timer_sched_read(void)
 	return ~readl(timer_base + TIMER_CNTVAL_REG(1));
 }
 
-static void __init sun4i_timer_init(struct device_node *node)
+static int __init sun4i_timer_init(struct device_node *node)
 {
 	unsigned long rate = 0;
 	struct clk *clk;
@@ -154,17 +154,28 @@ static void __init sun4i_timer_init(struct device_node *node)
 	u32 val;
 
 	timer_base = of_iomap(node, 0);
-	if (!timer_base)
-		panic("Can't map registers");
+	if (!timer_base) {
+		pr_crit("Can't map registers");
+		return -ENXIO;
+	}
 
 	irq = irq_of_parse_and_map(node, 0);
-	if (irq <= 0)
-		panic("Can't parse IRQ");
+	if (irq <= 0) {
+		pr_crit("Can't parse IRQ");
+		return -EINVAL;
+	}
 
 	clk = of_clk_get(node, 0);
-	if (IS_ERR(clk))
-		panic("Can't get timer clock");
-	clk_prepare_enable(clk);
+	if (IS_ERR(clk)) {
+		pr_crit("Can't get timer clock");
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("Failed to prepare clock");
+		return ret;
+	}
 
 	rate = clk_get_rate(clk);
 
@@ -182,8 +193,12 @@ static void __init sun4i_timer_init(struct device_node *node)
 	    of_machine_is_compatible("allwinner,sun5i-a10s"))
 		sched_clock_register(sun4i_timer_sched_read, 32, rate);
 
-	clocksource_mmio_init(timer_base + TIMER_CNTVAL_REG(1), node->name,
-			      rate, 350, 32, clocksource_mmio_readl_down);
+	ret = clocksource_mmio_init(timer_base + TIMER_CNTVAL_REG(1), node->name,
+				    rate, 350, 32, clocksource_mmio_readl_down);
+	if (ret) {
+		pr_err("Failed to register clocksource");
+		return ret;
+	}
 
 	ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
 
@@ -200,12 +215,16 @@ static void __init sun4i_timer_init(struct device_node *node)
 					TIMER_SYNC_TICKS, 0xffffffff);
 
 	ret = setup_irq(irq, &sun4i_timer_irq);
-	if (ret)
-		pr_warn("failed to setup irq %d\n", irq);
+	if (ret) {
+		pr_err("failed to setup irq %d\n", irq);
+		return ret;
+	}
 
 	/* Enable timer0 interrupt */
 	val = readl(timer_base + TIMER_IRQ_EN_REG);
 	writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
+
+	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
 		       sun4i_timer_init);

drivers/clocksource/tango_xtal.c

@@ -19,7 +19,7 @@ static u64 notrace read_sched_clock(void)
 	return read_xtal_counter();
 }
 
-static void __init tango_clocksource_init(struct device_node *np)
+static int __init tango_clocksource_init(struct device_node *np)
 {
 	struct clk *clk;
 	int xtal_freq, ret;
@@ -27,13 +27,13 @@ static void __init tango_clocksource_init(struct device_node *np)
 	xtal_in_cnt = of_iomap(np, 0);
 	if (xtal_in_cnt == NULL) {
 		pr_err("%s: invalid address\n", np->full_name);
-		return;
+		return -ENXIO;
 	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
 		pr_err("%s: invalid clock\n", np->full_name);
-		return;
+		return PTR_ERR(clk);
 	}
 
 	xtal_freq = clk_get_rate(clk);
@@ -44,11 +44,13 @@ static void __init tango_clocksource_init(struct device_node *np)
 				    32, clocksource_mmio_readl_up);
 	if (ret) {
 		pr_err("%s: registration failed\n", np->full_name);
-		return;
+		return ret;
 	}
 
 	sched_clock_register(read_sched_clock, 32, xtal_freq);
 	register_current_timer_delay(&delay_timer);
+
+	return 0;
 }
 
 CLOCKSOURCE_OF_DECLARE(tango, "sigma,tick-counter", tango_clocksource_init);

drivers/clocksource/tegra20_timer.c

@@ -165,7 +165,7 @@ static struct irqaction tegra_timer_irq = {
 	.dev_id		= &tegra_clockevent,
 };
 
-static void __init tegra20_init_timer(struct device_node *np)
+static int __init tegra20_init_timer(struct device_node *np)
 {
 	struct clk *clk;
 	unsigned long rate;
@@ -174,13 +174,13 @@ static void __init tegra20_init_timer(struct device_node *np)
 	timer_reg_base = of_iomap(np, 0);
 	if (!timer_reg_base) {
 		pr_err("Can't map timer registers\n");
-		BUG();
+		return -ENXIO;
 	}
 
 	tegra_timer_irq.irq = irq_of_parse_and_map(np, 2);
 	if (tegra_timer_irq.irq <= 0) {
 		pr_err("Failed to map timer IRQ\n");
-		BUG();
+		return -EINVAL;
 	}
 
 	clk = of_clk_get(np, 0);
@@ -211,10 +211,12 @@ static void __init tegra20_init_timer(struct device_node *np)
 
 	sched_clock_register(tegra_read_sched_clock, 32, 1000000);
 
-	if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
-		"timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
+	ret = clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
+				    "timer_us", 1000000, 300, 32,
+				    clocksource_mmio_readl_up);
+	if (ret) {
 		pr_err("Failed to register clocksource\n");
-		BUG();
+		return ret;
 	}
 
 	tegra_delay_timer.read_current_timer =
@@ -225,24 +227,26 @@ static void __init tegra20_init_timer(struct device_node *np)
 	ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq);
 	if (ret) {
 		pr_err("Failed to register timer IRQ: %d\n", ret);
-		BUG();
+		return ret;
 	}
 
 	tegra_clockevent.cpumask = cpu_all_mask;
 	tegra_clockevent.irq = tegra_timer_irq.irq;
 	clockevents_config_and_register(&tegra_clockevent, 1000000,
 					0x1, 0x1fffffff);
+
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
 
-static void __init tegra20_init_rtc(struct device_node *np)
+static int __init tegra20_init_rtc(struct device_node *np)
 {
 	struct clk *clk;
 
 	rtc_base = of_iomap(np, 0);
 	if (!rtc_base) {
 		pr_err("Can't map RTC registers");
-		BUG();
+		return -ENXIO;
 	}
 
 	/*
@@ -255,6 +259,6 @@ static void __init tegra20_init_rtc(struct device_node *np)
 	else
 		clk_prepare_enable(clk);
 
-	register_persistent_clock(NULL, tegra_read_persistent_clock64);
+	return register_persistent_clock(NULL, tegra_read_persistent_clock64);
 }
 CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);

drivers/clocksource/time-armada-370-xp.c

@@ -246,7 +246,7 @@ static void armada_370_xp_timer_resume(void)
 	writel(timer0_local_ctrl_reg, local_base + TIMER_CTRL_OFF);
 }
 
-struct syscore_ops armada_370_xp_timer_syscore_ops = {
+static struct syscore_ops armada_370_xp_timer_syscore_ops = {
 	.suspend	= armada_370_xp_timer_suspend,
 	.resume		= armada_370_xp_timer_resume,
 };
@@ -260,14 +260,22 @@ static struct delay_timer armada_370_delay_timer = {
 	.read_current_timer = armada_370_delay_timer_read,
 };
 
-static void __init armada_370_xp_timer_common_init(struct device_node *np)
+static int __init armada_370_xp_timer_common_init(struct device_node *np)
 {
 	u32 clr = 0, set = 0;
 	int res;
 
 	timer_base = of_iomap(np, 0);
-	WARN_ON(!timer_base);
+	if (!timer_base) {
+		pr_err("Failed to iomap");
+		return -ENXIO;
+	}
+
 	local_base = of_iomap(np, 1);
+	if (!local_base) {
+		pr_err("Failed to iomap");
+		return -ENXIO;
+	}
 
 	if (timer25Mhz) {
 		set = TIMER0_25MHZ;		
@@ -306,14 +314,19 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
 	 */
 	sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk);
 
-	clocksource_mmio_init(timer_base + TIMER0_VAL_OFF,
-			      "armada_370_xp_clocksource",
-			      timer_clk, 300, 32, clocksource_mmio_readl_down);
+	res = clocksource_mmio_init(timer_base + TIMER0_VAL_OFF,
+				    "armada_370_xp_clocksource",
+				    timer_clk, 300, 32, clocksource_mmio_readl_down);
+	if (res) {
+		pr_err("Failed to initialize clocksource mmio");
+		return res;
+	}
 
 	register_cpu_notifier(&armada_370_xp_timer_cpu_nb);
 
 	armada_370_xp_evt = alloc_percpu(struct clock_event_device);
-
+	if (!armada_370_xp_evt)
+		return -ENOMEM;
 
 	/*
 	 * Setup clockevent timer (interrupt-driven).
@@ -323,33 +336,54 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
 				"armada_370_xp_per_cpu_tick",
 				armada_370_xp_evt);
 	/* Immediately configure the timer on the boot CPU */
-	if (!res)
-		armada_370_xp_timer_setup(this_cpu_ptr(armada_370_xp_evt));
+	if (res) {
+		pr_err("Failed to request percpu irq");
+		return res;
+	}
+
+	res = armada_370_xp_timer_setup(this_cpu_ptr(armada_370_xp_evt));
+	if (!res) {
+		pr_err("Failed to setup timer");
+		return res;
+	}
 
 	register_syscore_ops(&armada_370_xp_timer_syscore_ops);
+	
+	return 0;
 }
 
-static void __init armada_xp_timer_init(struct device_node *np)
+static int __init armada_xp_timer_init(struct device_node *np)
 {
 	struct clk *clk = of_clk_get_by_name(np, "fixed");
+	int ret;
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get clock");
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
 
-	/* The 25Mhz fixed clock is mandatory, and must always be available */
-	BUG_ON(IS_ERR(clk));
-	clk_prepare_enable(clk);
 	timer_clk = clk_get_rate(clk);
 
-	armada_370_xp_timer_common_init(np);
+	return armada_370_xp_timer_common_init(np);
 }
 CLOCKSOURCE_OF_DECLARE(armada_xp, "marvell,armada-xp-timer",
 		       armada_xp_timer_init);
 
-static void __init armada_375_timer_init(struct device_node *np)
+static int __init armada_375_timer_init(struct device_node *np)
 {
 	struct clk *clk;
+	int ret;
 
 	clk = of_clk_get_by_name(np, "fixed");
 	if (!IS_ERR(clk)) {
-		clk_prepare_enable(clk);
+		ret = clk_prepare_enable(clk);
+		if (ret)
+			return ret;
 		timer_clk = clk_get_rate(clk);
 	} else {
 
@@ -360,27 +394,43 @@ static void __init armada_375_timer_init(struct device_node *np)
 		clk = of_clk_get(np, 0);
 
 		/* Must have at least a clock */
-		BUG_ON(IS_ERR(clk));
-		clk_prepare_enable(clk);
+		if (IS_ERR(clk)) {
+			pr_err("Failed to get clock");
+			return PTR_ERR(clk);
+		}
+
+		ret = clk_prepare_enable(clk);
+		if (ret)
+			return ret;
+
 		timer_clk = clk_get_rate(clk) / TIMER_DIVIDER;
 		timer25Mhz = false;
 	}
 
-	armada_370_xp_timer_common_init(np);
+	return armada_370_xp_timer_common_init(np);
 }
 CLOCKSOURCE_OF_DECLARE(armada_375, "marvell,armada-375-timer",
 		       armada_375_timer_init);
 
-static void __init armada_370_timer_init(struct device_node *np)
+static int __init armada_370_timer_init(struct device_node *np)
 {
-	struct clk *clk = of_clk_get(np, 0);
+	struct clk *clk;
+	int ret;
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get clock");
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
 
-	BUG_ON(IS_ERR(clk));
-	clk_prepare_enable(clk);
 	timer_clk = clk_get_rate(clk) / TIMER_DIVIDER;
 	timer25Mhz = false;
 
-	armada_370_xp_timer_common_init(np);
+	return armada_370_xp_timer_common_init(np);
 }
 CLOCKSOURCE_OF_DECLARE(armada_370, "marvell,armada-370-timer",
 		       armada_370_timer_init);

drivers/clocksource/time-efm32.c

@@ -233,10 +233,15 @@ static int __init efm32_clockevent_init(struct device_node *np)
 					DIV_ROUND_CLOSEST(rate, 1024),
 					0xf, 0xffff);
 
-	setup_irq(irq, &efm32_clock_event_irq);
+	ret = setup_irq(irq, &efm32_clock_event_irq);
+	if (ret) {
+		pr_err("Failed setup irq");
+		goto err_setup_irq;
+	}
 
 	return 0;
 
+err_setup_irq:
 err_get_irq:
 
 	iounmap(base);
@@ -255,16 +260,16 @@ static int __init efm32_clockevent_init(struct device_node *np)
  * This function asserts that we have exactly one clocksource and one
  * clock_event_device in the end.
  */
-static void __init efm32_timer_init(struct device_node *np)
+static int __init efm32_timer_init(struct device_node *np)
 {
 	static int has_clocksource, has_clockevent;
-	int ret;
+	int ret = 0;
 
 	if (!has_clocksource) {
 		ret = efm32_clocksource_init(np);
 		if (!ret) {
 			has_clocksource = 1;
-			return;
+			return 0;
 		}
 	}
 
@@ -272,9 +277,11 @@ static void __init efm32_timer_init(struct device_node *np)
 		ret = efm32_clockevent_init(np);
 		if (!ret) {
 			has_clockevent = 1;
-			return;
+			return 0;
 		}
 	}
+
+	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(efm32compat, "efm32,timer", efm32_timer_init);
 CLOCKSOURCE_OF_DECLARE(efm32, "energymicro,efm32-timer", efm32_timer_init);

drivers/clocksource/time-lpc32xx.c

@@ -288,16 +288,16 @@ static int __init lpc32xx_clockevent_init(struct device_node *np)
  * This function asserts that we have exactly one clocksource and one
  * clock_event_device in the end.
  */
-static void __init lpc32xx_timer_init(struct device_node *np)
+static int __init lpc32xx_timer_init(struct device_node *np)
 {
 	static int has_clocksource, has_clockevent;
-	int ret;
+	int ret = 0;
 
 	if (!has_clocksource) {
 		ret = lpc32xx_clocksource_init(np);
 		if (!ret) {
 			has_clocksource = 1;
-			return;
+			return 0;
 		}
 	}
 
@@ -305,8 +305,10 @@ static void __init lpc32xx_timer_init(struct device_node *np)
 		ret = lpc32xx_clockevent_init(np);
 		if (!ret) {
 			has_clockevent = 1;
-			return;
+			return 0;
 		}
 	}
+
+	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(lpc32xx_timer, "nxp,lpc3220-timer", lpc32xx_timer_init);

drivers/clocksource/time-orion.c

@@ -104,25 +104,36 @@ static struct irqaction orion_clkevt_irq = {
 	.handler	= orion_clkevt_irq_handler,
 };
 
-static void __init orion_timer_init(struct device_node *np)
+static int __init orion_timer_init(struct device_node *np)
 {
 	struct clk *clk;
-	int irq;
+	int irq, ret;
 
 	/* timer registers are shared with watchdog timer */
 	timer_base = of_iomap(np, 0);
-	if (!timer_base)
-		panic("%s: unable to map resource\n", np->name);
+	if (!timer_base) {
+		pr_err("%s: unable to map resource\n", np->name);
+		return -ENXIO;
+	}
 
 	clk = of_clk_get(np, 0);
-	if (IS_ERR(clk))
-		panic("%s: unable to get clk\n", np->name);
-	clk_prepare_enable(clk);
+	if (IS_ERR(clk)) {
+		pr_err("%s: unable to get clk\n", np->name);
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("Failed to prepare clock");
+		return ret;
+	}
 
 	/* we are only interested in timer1 irq */
 	irq = irq_of_parse_and_map(np, 1);
-	if (irq <= 0)
-		panic("%s: unable to parse timer1 irq\n", np->name);
+	if (irq <= 0) {
+		pr_err("%s: unable to parse timer1 irq\n", np->name);
+		return -EINVAL;
+	}
 
 	/* setup timer0 as free-running clocksource */
 	writel(~0, timer_base + TIMER0_VAL);
@@ -130,19 +141,30 @@ static void __init orion_timer_init(struct device_node *np)
 	atomic_io_modify(timer_base + TIMER_CTRL,
 		TIMER0_RELOAD_EN | TIMER0_EN,
 		TIMER0_RELOAD_EN | TIMER0_EN);
-	clocksource_mmio_init(timer_base + TIMER0_VAL, "orion_clocksource",
-			      clk_get_rate(clk), 300, 32,
-			      clocksource_mmio_readl_down);
+
+	ret = clocksource_mmio_init(timer_base + TIMER0_VAL, "orion_clocksource",
+				    clk_get_rate(clk), 300, 32,
+				    clocksource_mmio_readl_down);
+	if (ret) {
+		pr_err("Failed to initialize mmio timer");
+		return ret;
+	}
+
 	sched_clock_register(orion_read_sched_clock, 32, clk_get_rate(clk));
 
 	/* setup timer1 as clockevent timer */
-	if (setup_irq(irq, &orion_clkevt_irq))
-		panic("%s: unable to setup irq\n", np->name);
+	ret = setup_irq(irq, &orion_clkevt_irq);
+	if (ret) {
+		pr_err("%s: unable to setup irq\n", np->name);
+		return ret;
+	}
 
 	ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ;
 	orion_clkevt.cpumask = cpumask_of(0);
 	orion_clkevt.irq = irq;
 	clockevents_config_and_register(&orion_clkevt, clk_get_rate(clk),
 					ORION_ONESHOT_MIN, ORION_ONESHOT_MAX);
+
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);

drivers/clocksource/time-pistachio.c

@@ -148,7 +148,7 @@ static struct pistachio_clocksource pcs_gpt = {
 		},
 };
 
-static void __init pistachio_clksrc_of_init(struct device_node *node)
+static int __init pistachio_clksrc_of_init(struct device_node *node)
 {
 	struct clk *sys_clk, *fast_clk;
 	struct regmap *periph_regs;
@@ -158,45 +158,45 @@ static void __init pistachio_clksrc_of_init(struct device_node *node)
 	pcs_gpt.base = of_iomap(node, 0);
 	if (!pcs_gpt.base) {
 		pr_err("cannot iomap\n");
-		return;
+		return -ENXIO;
 	}
 
 	periph_regs = syscon_regmap_lookup_by_phandle(node, "img,cr-periph");
 	if (IS_ERR(periph_regs)) {
 		pr_err("cannot get peripheral regmap (%ld)\n",
 		       PTR_ERR(periph_regs));
-		return;
+		return PTR_ERR(periph_regs);
 	}
 
 	/* Switch to using the fast counter clock */
 	ret = regmap_update_bits(periph_regs, PERIP_TIMER_CONTROL,
 				 0xf, 0x0);
 	if (ret)
-		return;
+		return ret;
 
 	sys_clk = of_clk_get_by_name(node, "sys");
 	if (IS_ERR(sys_clk)) {
 		pr_err("clock get failed (%ld)\n", PTR_ERR(sys_clk));
-		return;
+		return PTR_ERR(sys_clk);
 	}
 
 	fast_clk = of_clk_get_by_name(node, "fast");
 	if (IS_ERR(fast_clk)) {
 		pr_err("clock get failed (%lu)\n", PTR_ERR(fast_clk));
-		return;
+		return PTR_ERR(fast_clk);
 	}
 
 	ret = clk_prepare_enable(sys_clk);
 	if (ret < 0) {
 		pr_err("failed to enable clock (%d)\n", ret);
-		return;
+		return ret;
 	}
 
 	ret = clk_prepare_enable(fast_clk);
 	if (ret < 0) {
 		pr_err("failed to enable clock (%d)\n", ret);
 		clk_disable_unprepare(sys_clk);
-		return;
+		return ret;
 	}
 
 	rate = clk_get_rate(fast_clk);
@@ -212,7 +212,7 @@ static void __init pistachio_clksrc_of_init(struct device_node *node)
 
 	raw_spin_lock_init(&pcs_gpt.lock);
 	sched_clock_register(pistachio_read_sched_clock, 32, rate);
-	clocksource_register_hz(&pcs_gpt.cs, rate);
+	return clocksource_register_hz(&pcs_gpt.cs, rate);
 }
 CLOCKSOURCE_OF_DECLARE(pistachio_gptimer, "img,pistachio-gptimer",
 		       pistachio_clksrc_of_init);

drivers/clocksource/timer-atlas7.c

@@ -238,7 +238,7 @@ static struct notifier_block sirfsoc_cpu_nb = {
 	.notifier_call = sirfsoc_cpu_notify,
 };
 
-static void __init sirfsoc_clockevent_init(void)
+static int __init sirfsoc_clockevent_init(void)
 {
 	sirfsoc_clockevent = alloc_percpu(struct clock_event_device);
 	BUG_ON(!sirfsoc_clockevent);
@@ -246,11 +246,11 @@ static void __init sirfsoc_clockevent_init(void)
 	BUG_ON(register_cpu_notifier(&sirfsoc_cpu_nb));
 
 	/* Immediately configure the timer on the boot CPU */
-	sirfsoc_local_timer_setup(this_cpu_ptr(sirfsoc_clockevent));
+	return sirfsoc_local_timer_setup(this_cpu_ptr(sirfsoc_clockevent));
 }
 
 /* initialize the kernel jiffy timer source */
-static void __init sirfsoc_atlas7_timer_init(struct device_node *np)
+static int __init sirfsoc_atlas7_timer_init(struct device_node *np)
 {
 	struct clk *clk;
 
@@ -279,23 +279,29 @@ static void __init sirfsoc_atlas7_timer_init(struct device_node *np)
 
 	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, atlas7_timer_rate));
 
-	sirfsoc_clockevent_init();
+	return sirfsoc_clockevent_init();
 }
 
-static void __init sirfsoc_of_timer_init(struct device_node *np)
+static int __init sirfsoc_of_timer_init(struct device_node *np)
 {
 	sirfsoc_timer_base = of_iomap(np, 0);
-	if (!sirfsoc_timer_base)
-		panic("unable to map timer cpu registers\n");
+	if (!sirfsoc_timer_base) {
+		pr_err("unable to map timer cpu registers\n");
+		return -ENXIO;
+	}
 
 	sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
-	if (!sirfsoc_timer_irq.irq)
-		panic("No irq passed for timer0 via DT\n");
+	if (!sirfsoc_timer_irq.irq) {
+		pr_err("No irq passed for timer0 via DT\n");
+		return -EINVAL;
+	}
 
 	sirfsoc_timer1_irq.irq = irq_of_parse_and_map(np, 1);
-	if (!sirfsoc_timer1_irq.irq)
-		panic("No irq passed for timer1 via DT\n");
+	if (!sirfsoc_timer1_irq.irq) {
+		pr_err("No irq passed for timer1 via DT\n");
+		return -EINVAL;
+	}
 
-	sirfsoc_atlas7_timer_init(np);
+	return sirfsoc_atlas7_timer_init(np);
 }
 CLOCKSOURCE_OF_DECLARE(sirfsoc_atlas7_timer, "sirf,atlas7-tick", sirfsoc_of_timer_init);

drivers/clocksource/timer-atmel-pit.c

@@ -177,7 +177,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 /*
  * Set up both clocksource and clockevent support.
  */
-static void __init at91sam926x_pit_common_init(struct pit_data *data)
+static int __init at91sam926x_pit_common_init(struct pit_data *data)
 {
 	unsigned long	pit_rate;
 	unsigned	bits;
@@ -204,14 +204,21 @@ static void __init at91sam926x_pit_common_init(struct pit_data *data)
 	data->clksrc.rating = 175;
 	data->clksrc.read = read_pit_clk;
 	data->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-	clocksource_register_hz(&data->clksrc, pit_rate);
+	
+	ret = clocksource_register_hz(&data->clksrc, pit_rate);
+	if (ret) {
+		pr_err("Failed to register clocksource");
+		return ret;
+	}
 
 	/* Set up irq handler */
 	ret = request_irq(data->irq, at91sam926x_pit_interrupt,
 			  IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 			  "at91_tick", data);
-	if (ret)
-		panic(pr_fmt("Unable to setup IRQ\n"));
+	if (ret) {
+		pr_err("Unable to setup IRQ\n");
+		return ret;
+	}
 
 	/* Set up and register clockevents */
 	data->clkevt.name = "pit";
@@ -226,34 +233,42 @@ static void __init at91sam926x_pit_common_init(struct pit_data *data)
 	data->clkevt.resume = at91sam926x_pit_resume;
 	data->clkevt.suspend = at91sam926x_pit_suspend;
 	clockevents_register_device(&data->clkevt);
+
+	return 0;
 }
 
-static void __init at91sam926x_pit_dt_init(struct device_node *node)
+static int __init at91sam926x_pit_dt_init(struct device_node *node)
 {
 	struct pit_data *data;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
-		panic(pr_fmt("Unable to allocate memory\n"));
+		return -ENOMEM;
 
 	data->base = of_iomap(node, 0);
-	if (!data->base)
-		panic(pr_fmt("Could not map PIT address\n"));
+	if (!data->base) {
+		pr_err("Could not map PIT address\n");
+		return -ENXIO;
+	}
 
 	data->mck = of_clk_get(node, 0);
 	if (IS_ERR(data->mck))
 		/* Fallback on clkdev for !CCF-based boards */
 		data->mck = clk_get(NULL, "mck");
 
-	if (IS_ERR(data->mck))
-		panic(pr_fmt("Unable to get mck clk\n"));
+	if (IS_ERR(data->mck)) {
+		pr_err("Unable to get mck clk\n");
+		return PTR_ERR(data->mck);
+	}
 
 	/* Get the interrupts property */
 	data->irq = irq_of_parse_and_map(node, 0);
-	if (!data->irq)
-		panic(pr_fmt("Unable to get IRQ from DT\n"));
+	if (!data->irq) {
+		pr_err("Unable to get IRQ from DT\n");
+		return -EINVAL;
+	}
 
-	at91sam926x_pit_common_init(data);
+	return at91sam926x_pit_common_init(data);
 }
 CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
 		       at91sam926x_pit_dt_init);

drivers/clocksource/timer-atmel-st.c

@@ -194,15 +194,17 @@ static struct clock_event_device clkevt = {
 /*
  * ST (system timer) module supports both clockevents and clocksource.
  */
-static void __init atmel_st_timer_init(struct device_node *node)
+static int __init atmel_st_timer_init(struct device_node *node)
 {
 	struct clk *sclk;
 	unsigned int sclk_rate, val;
 	int irq, ret;
 
 	regmap_st = syscon_node_to_regmap(node);
-	if (IS_ERR(regmap_st))
-		panic(pr_fmt("Unable to get regmap\n"));
+	if (IS_ERR(regmap_st)) {
+		pr_err("Unable to get regmap\n");
+		return PTR_ERR(regmap_st);
+	}
 
 	/* Disable all timer interrupts, and clear any pending ones */
 	regmap_write(regmap_st, AT91_ST_IDR,
@@ -211,27 +213,37 @@ static void __init atmel_st_timer_init(struct device_node *node)
 
 	/* Get the interrupts property */
 	irq  = irq_of_parse_and_map(node, 0);
-	if (!irq)
-		panic(pr_fmt("Unable to get IRQ from DT\n"));
+	if (!irq) {
+		pr_err("Unable to get IRQ from DT\n");
+		return -EINVAL;
+	}
 
 	/* Make IRQs happen for the system timer */
 	ret = request_irq(irq, at91rm9200_timer_interrupt,
 			  IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 			  "at91_tick", regmap_st);
-	if (ret)
-		panic(pr_fmt("Unable to setup IRQ\n"));
+	if (ret) {
+		pr_err("Unable to setup IRQ\n");
+		return ret;
+	}
 
 	sclk = of_clk_get(node, 0);
-	if (IS_ERR(sclk))
-		panic(pr_fmt("Unable to get slow clock\n"));
+	if (IS_ERR(sclk)) {
+		pr_err("Unable to get slow clock\n");
+		return PTR_ERR(sclk);
+	}
 
-	clk_prepare_enable(sclk);
-	if (ret)
-		panic(pr_fmt("Could not enable slow clock\n"));
+	ret = clk_prepare_enable(sclk);
+	if (ret) {
+		pr_err("Could not enable slow clock\n");
+		return ret;
+	}
 
 	sclk_rate = clk_get_rate(sclk);
-	if (!sclk_rate)
-		panic(pr_fmt("Invalid slow clock rate\n"));
+	if (!sclk_rate) {
+		pr_err("Invalid slow clock rate\n");
+		return -EINVAL;
+	}
 	timer_latch = (sclk_rate + HZ / 2) / HZ;
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
@@ -246,7 +258,7 @@ static void __init atmel_st_timer_init(struct device_node *node)
 					2, AT91_ST_ALMV);
 
 	/* register clocksource */
-	clocksource_register_hz(&clk32k, sclk_rate);
+	return clocksource_register_hz(&clk32k, sclk_rate);
 }
 CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
 		       atmel_st_timer_init);

drivers/clocksource/timer-digicolor.c

@@ -63,7 +63,7 @@ struct digicolor_timer {
 	int timer_id; /* one of TIMER_* */
 };
 
-struct digicolor_timer *dc_timer(struct clock_event_device *ce)
+static struct digicolor_timer *dc_timer(struct clock_event_device *ce)
 {
 	return container_of(ce, struct digicolor_timer, ce);
 }
@@ -148,7 +148,7 @@ static u64 notrace digicolor_timer_sched_read(void)
 	return ~readl(dc_timer_dev.base + COUNT(TIMER_B));
 }
 
-static void __init digicolor_timer_init(struct device_node *node)
+static int __init digicolor_timer_init(struct device_node *node)
 {
 	unsigned long rate;
 	struct clk *clk;
@@ -161,19 +161,19 @@ static void __init digicolor_timer_init(struct device_node *node)
 	dc_timer_dev.base = of_iomap(node, 0);
 	if (!dc_timer_dev.base) {
 		pr_err("Can't map registers");
-		return;
+		return -ENXIO;
 	}
 
 	irq = irq_of_parse_and_map(node, dc_timer_dev.timer_id);
 	if (irq <= 0) {
 		pr_err("Can't parse IRQ");
-		return;
+		return -EINVAL;
 	}
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
 		pr_err("Can't get timer clock");
-		return;
+		return PTR_ERR(clk);
 	}
 	clk_prepare_enable(clk);
 	rate = clk_get_rate(clk);
@@ -190,13 +190,17 @@ static void __init digicolor_timer_init(struct device_node *node)
 	ret = request_irq(irq, digicolor_timer_interrupt,
 			  IRQF_TIMER | IRQF_IRQPOLL, "digicolor_timerC",
 			  &dc_timer_dev.ce);
-	if (ret)
+	if (ret) {
 		pr_warn("request of timer irq %d failed (%d)\n", irq, ret);
+		return ret;
+	}
 
 	dc_timer_dev.ce.cpumask = cpu_possible_mask;
 	dc_timer_dev.ce.irq = irq;
 
 	clockevents_config_and_register(&dc_timer_dev.ce, rate, 0, 0xffffffff);
+
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(conexant_digicolor, "cnxt,cx92755-timer",
 		       digicolor_timer_init);

drivers/clocksource/timer-imx-gpt.c

@@ -407,8 +407,10 @@ static const struct imx_gpt_data imx6dl_gpt_data = {
 	.set_next_event = v2_set_next_event,
 };
 
-static void __init _mxc_timer_init(struct imx_timer *imxtm)
+static int __init _mxc_timer_init(struct imx_timer *imxtm)
 {
+	int ret;
+
 	switch (imxtm->type) {
 	case GPT_TYPE_IMX1:
 		imxtm->gpt = &imx1_gpt_data;
@@ -423,12 +425,12 @@ static void __init _mxc_timer_init(struct imx_timer *imxtm)
 		imxtm->gpt = &imx6dl_gpt_data;
 		break;
 	default:
-		BUG();
+		return -EINVAL;
 	}
 
 	if (IS_ERR(imxtm->clk_per)) {
 		pr_err("i.MX timer: unable to get clk\n");
-		return;
+		return PTR_ERR(imxtm->clk_per);
 	}
 
 	if (!IS_ERR(imxtm->clk_ipg))
@@ -446,8 +448,11 @@ static void __init _mxc_timer_init(struct imx_timer *imxtm)
 	imxtm->gpt->gpt_setup_tctl(imxtm);
 
 	/* init and register the timer to the framework */
-	mxc_clocksource_init(imxtm);
-	mxc_clockevent_init(imxtm);
+	ret = mxc_clocksource_init(imxtm);
+	if (ret)
+		return ret;
+
+	return mxc_clockevent_init(imxtm);
 }
 
 void __init mxc_timer_init(unsigned long pbase, int irq, enum imx_gpt_type type)
@@ -469,21 +474,27 @@ void __init mxc_timer_init(unsigned long pbase, int irq, enum imx_gpt_type type)
 	_mxc_timer_init(imxtm);
 }
 
-static void __init mxc_timer_init_dt(struct device_node *np,  enum imx_gpt_type type)
+static int __init mxc_timer_init_dt(struct device_node *np,  enum imx_gpt_type type)
 {
 	struct imx_timer *imxtm;
 	static int initialized;
+	int ret;
 
 	/* Support one instance only */
 	if (initialized)
-		return;
+		return 0;
 
 	imxtm = kzalloc(sizeof(*imxtm), GFP_KERNEL);
-	BUG_ON(!imxtm);
+	if (!imxtm)
+		return -ENOMEM;
 
 	imxtm->base = of_iomap(np, 0);
-	WARN_ON(!imxtm->base);
+	if (!imxtm->base)
+		return -ENXIO;
+
 	imxtm->irq = irq_of_parse_and_map(np, 0);
+	if (imxtm->irq <= 0)
+		return -EINVAL;
 
 	imxtm->clk_ipg = of_clk_get_by_name(np, "ipg");
 
@@ -494,22 +505,26 @@ static void __init mxc_timer_init_dt(struct device_node *np,  enum imx_gpt_type
 
 	imxtm->type = type;
 
-	_mxc_timer_init(imxtm);
+	ret = _mxc_timer_init(imxtm);
+	if (ret)
+		return ret;
 
 	initialized = 1;
+
+	return 0;
 }
 
-static void __init imx1_timer_init_dt(struct device_node *np)
+static int __init imx1_timer_init_dt(struct device_node *np)
 {
-	mxc_timer_init_dt(np, GPT_TYPE_IMX1);
+	return mxc_timer_init_dt(np, GPT_TYPE_IMX1);
 }
 
-static void __init imx21_timer_init_dt(struct device_node *np)
+static int __init imx21_timer_init_dt(struct device_node *np)
 {
-	mxc_timer_init_dt(np, GPT_TYPE_IMX21);
+	return mxc_timer_init_dt(np, GPT_TYPE_IMX21);
 }
 
-static void __init imx31_timer_init_dt(struct device_node *np)
+static int __init imx31_timer_init_dt(struct device_node *np)
 {
 	enum imx_gpt_type type = GPT_TYPE_IMX31;
 
@@ -522,12 +537,12 @@ static void __init imx31_timer_init_dt(struct device_node *np)
 	if (of_machine_is_compatible("fsl,imx6dl"))
 		type = GPT_TYPE_IMX6DL;
 
-	mxc_timer_init_dt(np, type);
+	return mxc_timer_init_dt(np, type);
 }
 
-static void __init imx6dl_timer_init_dt(struct device_node *np)
+static int __init imx6dl_timer_init_dt(struct device_node *np)
 {
-	mxc_timer_init_dt(np, GPT_TYPE_IMX6DL);
+	return mxc_timer_init_dt(np, GPT_TYPE_IMX6DL);
 }
 
 CLOCKSOURCE_OF_DECLARE(imx1_timer, "fsl,imx1-gpt", imx1_timer_init_dt);

drivers/clocksource/timer-integrator-ap.c

@@ -36,11 +36,12 @@ static u64 notrace integrator_read_sched_clock(void)
 	return -readl(sched_clk_base + TIMER_VALUE);
 }
 
-static void integrator_clocksource_init(unsigned long inrate,
-					void __iomem *base)
+static int integrator_clocksource_init(unsigned long inrate,
+				       void __iomem *base)
 {
 	u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
 	unsigned long rate = inrate;
+	int ret;
 
 	if (rate >= 1500000) {
 		rate /= 16;
@@ -50,11 +51,15 @@ static void integrator_clocksource_init(unsigned long inrate,
 	writel(0xffff, base + TIMER_LOAD);
 	writel(ctrl, base + TIMER_CTRL);
 
-	clocksource_mmio_init(base + TIMER_VALUE, "timer2",
-			rate, 200, 16, clocksource_mmio_readl_down);
+	ret = clocksource_mmio_init(base + TIMER_VALUE, "timer2",
+				    rate, 200, 16, clocksource_mmio_readl_down);
+	if (ret)
+		return ret;
 
 	sched_clk_base = base;
 	sched_clock_register(integrator_read_sched_clock, 16, rate);
+
+	return 0;
 }
 
 static unsigned long timer_reload;
@@ -138,11 +143,12 @@ static struct irqaction integrator_timer_irq = {
 	.dev_id		= &integrator_clockevent,
 };
 
-static void integrator_clockevent_init(unsigned long inrate,
-				void __iomem *base, int irq)
+static int integrator_clockevent_init(unsigned long inrate,
+				      void __iomem *base, int irq)
 {
 	unsigned long rate = inrate;
 	unsigned int ctrl = 0;
+	int ret;
 
 	clkevt_base = base;
 	/* Calculate and program a divisor */
@@ -156,14 +162,18 @@ static void integrator_clockevent_init(unsigned long inrate,
 	timer_reload = rate / HZ;
 	writel(ctrl, clkevt_base + TIMER_CTRL);
 
-	setup_irq(irq, &integrator_timer_irq);
+	ret = setup_irq(irq, &integrator_timer_irq);
+	if (ret)
+		return ret;
+
 	clockevents_config_and_register(&integrator_clockevent,
 					rate,
 					1,
 					0xffffU);
+	return 0;
 }
 
-static void __init integrator_ap_timer_init_of(struct device_node *node)
+static int __init integrator_ap_timer_init_of(struct device_node *node)
 {
 	const char *path;
 	void __iomem *base;
@@ -176,12 +186,12 @@ static void __init integrator_ap_timer_init_of(struct device_node *node)
 
 	base = of_io_request_and_map(node, 0, "integrator-timer");
 	if (IS_ERR(base))
-		return;
+		return PTR_ERR(base);
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
 		pr_err("No clock for %s\n", node->name);
-		return;
+		return PTR_ERR(clk);
 	}
 	clk_prepare_enable(clk);
 	rate = clk_get_rate(clk);
@@ -189,30 +199,37 @@ static void __init integrator_ap_timer_init_of(struct device_node *node)
 
 	err = of_property_read_string(of_aliases,
 				"arm,timer-primary", &path);
-	if (WARN_ON(err))
-		return;
+	if (err) {
+		pr_warn("Failed to read property");
+		return err;
+	}
+
 	pri_node = of_find_node_by_path(path);
+
 	err = of_property_read_string(of_aliases,
 				"arm,timer-secondary", &path);
-	if (WARN_ON(err))
-		return;
+	if (err) {
+		pr_warn("Failed to read property");		
+		return err;
+	}
+
+
 	sec_node = of_find_node_by_path(path);
 
-	if (node == pri_node) {
+	if (node == pri_node)
 		/* The primary timer lacks IRQ, use as clocksource */
-		integrator_clocksource_init(rate, base);
-		return;
-	}
+		return integrator_clocksource_init(rate, base);
 
 	if (node == sec_node) {
 		/* The secondary timer will drive the clock event */
 		irq = irq_of_parse_and_map(node, 0);
-		integrator_clockevent_init(rate, base, irq);
-		return;
+		return integrator_clockevent_init(rate, base, irq);
 	}
 
 	pr_info("Timer @%p unused\n", base);
 	clk_disable_unprepare(clk);
+
+	return 0;
 }
 
 CLOCKSOURCE_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer",

drivers/clocksource/timer-keystone.c

@@ -144,7 +144,7 @@ static int keystone_set_periodic(struct clock_event_device *evt)
 	return 0;
 }
 
-static void __init keystone_timer_init(struct device_node *np)
+static int __init keystone_timer_init(struct device_node *np)
 {
 	struct clock_event_device *event_dev = &timer.event_dev;
 	unsigned long rate;
@@ -154,20 +154,20 @@ static void __init keystone_timer_init(struct device_node *np)
 	irq  = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		pr_err("%s: failed to map interrupts\n", __func__);
-		return;
+		return -EINVAL;
 	}
 
 	timer.base = of_iomap(np, 0);
 	if (!timer.base) {
 		pr_err("%s: failed to map registers\n", __func__);
-		return;
+		return -ENXIO;
 	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
 		pr_err("%s: failed to get clock\n", __func__);
 		iounmap(timer.base);
-		return;
+		return PTR_ERR(clk);
 	}
 
 	error = clk_prepare_enable(clk);
@@ -219,11 +219,12 @@ static void __init keystone_timer_init(struct device_node *np)
 	clockevents_config_and_register(event_dev, rate, 1, ULONG_MAX);
 
 	pr_info("keystone timer clock @%lu Hz\n", rate);
-	return;
+	return 0;
 err:
 	clk_put(clk);
 	iounmap(timer.base);
+	return error;
 }
 
 CLOCKSOURCE_OF_DECLARE(keystone_timer, "ti,keystone-timer",
-					keystone_timer_init);
+			   keystone_timer_init);

drivers/clocksource/timer-nps.c

@@ -55,8 +55,8 @@ static cycle_t nps_clksrc_read(struct clocksource *clksrc)
 	return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
 }
 
-static void __init nps_setup_clocksource(struct device_node *node,
-					 struct clk *clk)
+static int __init nps_setup_clocksource(struct device_node *node,
+					struct clk *clk)
 {
 	int ret, cluster;
 
@@ -68,7 +68,7 @@ static void __init nps_setup_clocksource(struct device_node *node,
 	ret = clk_prepare_enable(clk);
 	if (ret) {
 		pr_err("Couldn't enable parent clock\n");
-		return;
+		return ret;
 	}
 
 	nps_timer_rate = clk_get_rate(clk);
@@ -79,19 +79,21 @@ static void __init nps_setup_clocksource(struct device_node *node,
 		pr_err("Couldn't register clock source.\n");
 		clk_disable_unprepare(clk);
 	}
+
+	return ret;
 }
 
-static void __init nps_timer_init(struct device_node *node)
+static int __init nps_timer_init(struct device_node *node)
 {
 	struct clk *clk;
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
 		pr_err("Can't get timer clock.\n");
-		return;
+		return PTR_ERR(clk);
 	}
 
-	nps_setup_clocksource(node, clk);
+	return nps_setup_clocksource(node, clk);
 }
 
 CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",

drivers/clocksource/timer-oxnas-rps.c

+/*
+ * drivers/clocksource/timer-oxnas-rps.c
+ *
+ * Copyright (C) 2009 Oxford Semiconductor Ltd
+ * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/clockchips.h>
+#include <linux/sched_clock.h>
+
+/* TIMER1 used as tick
+ * TIMER2 used as clocksource
+ */
+
+/* Registers definitions */
+
+#define TIMER_LOAD_REG		0x0
+#define TIMER_CURR_REG		0x4
+#define TIMER_CTRL_REG		0x8
+#define TIMER_CLRINT_REG	0xC
+
+#define TIMER_BITS		24
+
+#define TIMER_MAX_VAL		(BIT(TIMER_BITS) - 1)
+
+#define TIMER_PERIODIC		BIT(6)
+#define TIMER_ENABLE		BIT(7)
+
+#define TIMER_DIV1		(0)
+#define TIMER_DIV16		(1 << 2)
+#define TIMER_DIV256		(2 << 2)
+
+#define TIMER1_REG_OFFSET	0
+#define TIMER2_REG_OFFSET	0x20
+
+/* Clockevent & Clocksource data */
+
+struct oxnas_rps_timer {
+	struct clock_event_device clkevent;
+	void __iomem *clksrc_base;
+	void __iomem *clkevt_base;
+	unsigned long timer_period;
+	unsigned int timer_prescaler;
+	struct clk *clk;
+	int irq;
+};
+
+static irqreturn_t oxnas_rps_timer_irq(int irq, void *dev_id)
+{
+	struct oxnas_rps_timer *rps = dev_id;
+
+	writel_relaxed(0, rps->clkevt_base + TIMER_CLRINT_REG);
+
+	rps->clkevent.event_handler(&rps->clkevent);
+
+	return IRQ_HANDLED;
+}
+
+static void oxnas_rps_timer_config(struct oxnas_rps_timer *rps,
+				   unsigned long period,
+				   unsigned int periodic)
+{
+	uint32_t cfg = rps->timer_prescaler;
+
+	if (period)
+		cfg |= TIMER_ENABLE;
+
+	if (periodic)
+		cfg |= TIMER_PERIODIC;
+
+	writel_relaxed(period, rps->clkevt_base + TIMER_LOAD_REG);
+	writel_relaxed(cfg, rps->clkevt_base + TIMER_CTRL_REG);
+}
+
+static int oxnas_rps_timer_shutdown(struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, 0, 0);
+
+	return 0;
+}
+
+static int oxnas_rps_timer_set_periodic(struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, rps->timer_period, 1);
+
+	return 0;
+}
+
+static int oxnas_rps_timer_set_oneshot(struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, rps->timer_period, 0);
+
+	return 0;
+}
+
+static int oxnas_rps_timer_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, delta, 0);
+
+	return 0;
+}
+
+static int __init oxnas_rps_clockevent_init(struct oxnas_rps_timer *rps)
+{
+	ulong clk_rate = clk_get_rate(rps->clk);
+	ulong timer_rate;
+
+	/* Start with prescaler 1 */
+	rps->timer_prescaler = TIMER_DIV1;
+	rps->timer_period = DIV_ROUND_UP(clk_rate, HZ);
+	timer_rate = clk_rate;
+
+	if (rps->timer_period > TIMER_MAX_VAL) {
+		rps->timer_prescaler = TIMER_DIV16;
+		timer_rate = clk_rate / 16;
+		rps->timer_period = DIV_ROUND_UP(timer_rate, HZ);
+	}
+	if (rps->timer_period > TIMER_MAX_VAL) {
+		rps->timer_prescaler = TIMER_DIV256;
+		timer_rate = clk_rate / 256;
+		rps->timer_period = DIV_ROUND_UP(timer_rate, HZ);
+	}
+
+	rps->clkevent.name = "oxnas-rps";
+	rps->clkevent.features = CLOCK_EVT_FEAT_PERIODIC |
+				 CLOCK_EVT_FEAT_ONESHOT |
+				 CLOCK_EVT_FEAT_DYNIRQ;
+	rps->clkevent.tick_resume = oxnas_rps_timer_shutdown;
+	rps->clkevent.set_state_shutdown = oxnas_rps_timer_shutdown;
+	rps->clkevent.set_state_periodic = oxnas_rps_timer_set_periodic;
+	rps->clkevent.set_state_oneshot = oxnas_rps_timer_set_oneshot;
+	rps->clkevent.set_next_event = oxnas_rps_timer_next_event;
+	rps->clkevent.rating = 200;
+	rps->clkevent.cpumask = cpu_possible_mask;
+	rps->clkevent.irq = rps->irq;
+	clockevents_config_and_register(&rps->clkevent,
+					timer_rate,
+					1,
+					TIMER_MAX_VAL);
+
+	pr_info("Registered clock event rate %luHz prescaler %x period %lu\n",
+			clk_rate,
+			rps->timer_prescaler,
+			rps->timer_period);
+
+	return 0;
+}
+
+/* Clocksource */
+
+static void __iomem *timer_sched_base;
+
+static u64 notrace oxnas_rps_read_sched_clock(void)
+{
+	return ~readl_relaxed(timer_sched_base);
+}
+
+static int __init oxnas_rps_clocksource_init(struct oxnas_rps_timer *rps)
+{
+	ulong clk_rate = clk_get_rate(rps->clk);
+	int ret;
+
+	/* use prescale 16 */
+	clk_rate = clk_rate / 16;
+
+	writel_relaxed(TIMER_MAX_VAL, rps->clksrc_base + TIMER_LOAD_REG);
+	writel_relaxed(TIMER_PERIODIC | TIMER_ENABLE | TIMER_DIV16,
+			rps->clksrc_base + TIMER_CTRL_REG);
+
+	timer_sched_base = rps->clksrc_base + TIMER_CURR_REG;
+	sched_clock_register(oxnas_rps_read_sched_clock,
+			     TIMER_BITS, clk_rate);
+	ret = clocksource_mmio_init(timer_sched_base,
+				    "oxnas_rps_clocksource_timer",
+				    clk_rate, 250, TIMER_BITS,
+				    clocksource_mmio_readl_down);
+	if (WARN_ON(ret)) {
+		pr_err("can't register clocksource\n");
+		return ret;
+	}
+
+	pr_info("Registered clocksource rate %luHz\n", clk_rate);
+
+	return 0;
+}
+
+static int __init oxnas_rps_timer_init(struct device_node *np)
+{
+	struct oxnas_rps_timer *rps;
+	void __iomem *base;
+	int ret;
+
+	rps = kzalloc(sizeof(*rps), GFP_KERNEL);
+	if (!rps)
+		return -ENOMEM;
+
+	rps->clk = of_clk_get(np, 0);
+	if (IS_ERR(rps->clk)) {
+		ret = PTR_ERR(rps->clk);
+		goto err_alloc;
+	}
+
+	ret = clk_prepare_enable(rps->clk);
+	if (ret)
+		goto err_clk;
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		ret = -ENXIO;
+		goto err_clk_prepare;
+	}
+
+	rps->irq = irq_of_parse_and_map(np, 0);
+	if (rps->irq < 0) {
+		ret = -EINVAL;
+		goto err_iomap;
+	}
+
+	rps->clkevt_base = base + TIMER1_REG_OFFSET;
+	rps->clksrc_base = base + TIMER2_REG_OFFSET;
+
+	/* Disable timers */
+	writel_relaxed(0, rps->clkevt_base + TIMER_CTRL_REG);
+	writel_relaxed(0, rps->clksrc_base + TIMER_CTRL_REG);
+	writel_relaxed(0, rps->clkevt_base + TIMER_LOAD_REG);
+	writel_relaxed(0, rps->clksrc_base + TIMER_LOAD_REG);
+	writel_relaxed(0, rps->clkevt_base + TIMER_CLRINT_REG);
+	writel_relaxed(0, rps->clksrc_base + TIMER_CLRINT_REG);
+
+	ret = request_irq(rps->irq, oxnas_rps_timer_irq,
+			  IRQF_TIMER | IRQF_IRQPOLL,
+			  "rps-timer", rps);
+	if (ret)
+		goto err_iomap;
+
+	ret = oxnas_rps_clocksource_init(rps);
+	if (ret)
+		goto err_irqreq;
+
+	ret = oxnas_rps_clockevent_init(rps);
+	if (ret)
+		goto err_irqreq;
+
+	return 0;
+
+err_irqreq:
+	free_irq(rps->irq, rps);
+err_iomap:
+	iounmap(base);
+err_clk_prepare:
+	clk_disable_unprepare(rps->clk);
+err_clk:
+	clk_put(rps->clk);
+err_alloc:
+	kfree(rps);
+
+	return ret;
+}
+
+CLOCKSOURCE_OF_DECLARE(ox810se_rps,
+		       "oxsemi,ox810se-rps-timer", oxnas_rps_timer_init);

drivers/clocksource/timer-prima2.c

@@ -19,7 +19,6 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/sched_clock.h>
-#include <asm/mach/time.h>
 
 #define PRIMA2_CLOCK_FREQ 1000000
 
@@ -189,24 +188,36 @@ static void __init sirfsoc_clockevent_init(void)
 }
 
 /* initialize the kernel jiffy timer source */
-static void __init sirfsoc_prima2_timer_init(struct device_node *np)
+static int __init sirfsoc_prima2_timer_init(struct device_node *np)
 {
 	unsigned long rate;
 	struct clk *clk;
+	int ret;
 
 	clk = of_clk_get(np, 0);
-	BUG_ON(IS_ERR(clk));
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get clock");
+		return PTR_ERR(clk);
+	}
 
-	BUG_ON(clk_prepare_enable(clk));
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("Failed to enable clock");
+		return ret;
+	}
 
 	rate = clk_get_rate(clk);
 
-	BUG_ON(rate < PRIMA2_CLOCK_FREQ);
-	BUG_ON(rate % PRIMA2_CLOCK_FREQ);
+	if (rate < PRIMA2_CLOCK_FREQ || rate % PRIMA2_CLOCK_FREQ) {
+		pr_err("Invalid clock rate");
+		return -EINVAL;
+	}
 
 	sirfsoc_timer_base = of_iomap(np, 0);
-	if (!sirfsoc_timer_base)
-		panic("unable to map timer cpu registers\n");
+	if (!sirfsoc_timer_base) {
+		pr_err("unable to map timer cpu registers\n");
+		return -ENXIO;
+	}
 
 	sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
 
@@ -216,14 +227,23 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
 	writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
 
-	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource,
-				       PRIMA2_CLOCK_FREQ));
+	ret = clocksource_register_hz(&sirfsoc_clocksource, PRIMA2_CLOCK_FREQ);
+	if (ret) {
+		pr_err("Failed to register clocksource");
+		return ret;
+	}
 
 	sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
 
-	BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
+	ret = setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
+	if (ret) {
+		pr_err("Failed to setup irq");
+		return ret;
+	}
 
 	sirfsoc_clockevent_init();
+
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(sirfsoc_prima2_timer,
 	"sirf,prima2-tick", sirfsoc_prima2_timer_init);

drivers/clocksource/timer-sp804.c

@@ -77,7 +77,7 @@ void __init sp804_timer_disable(void __iomem *base)
 	writel(0, base + TIMER_CTRL);
 }
 
-void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
+int  __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
 						     const char *name,
 						     struct clk *clk,
 						     int use_sched_clock)
@@ -89,14 +89,13 @@ void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
 		if (IS_ERR(clk)) {
 			pr_err("sp804: clock not found: %d\n",
 			       (int)PTR_ERR(clk));
-			return;
+			return PTR_ERR(clk);
 		}
 	}
 
 	rate = sp804_get_clock_rate(clk);
-
 	if (rate < 0)
-		return;
+		return -EINVAL;
 
 	/* setup timer 0 as free-running clocksource */
 	writel(0, base + TIMER_CTRL);
@@ -112,6 +111,8 @@ void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
 		sched_clock_base = base;
 		sched_clock_register(sp804_read, 32, rate);
 	}
+
+	return 0;
 }
 
 
@@ -186,7 +187,7 @@ static struct irqaction sp804_timer_irq = {
 	.dev_id		= &sp804_clockevent,
 };
 
-void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
+int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
 {
 	struct clock_event_device *evt = &sp804_clockevent;
 	long rate;
@@ -196,12 +197,12 @@ void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struc
 	if (IS_ERR(clk)) {
 		pr_err("sp804: %s clock not found: %d\n", name,
 			(int)PTR_ERR(clk));
-		return;
+		return PTR_ERR(clk);
 	}
 
 	rate = sp804_get_clock_rate(clk);
 	if (rate < 0)
-		return;
+		return -EINVAL;
 
 	clkevt_base = base;
 	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
@@ -213,27 +214,31 @@ void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struc
 
 	setup_irq(irq, &sp804_timer_irq);
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
+
+	return 0;
 }
 
-static void __init sp804_of_init(struct device_node *np)
+static int __init sp804_of_init(struct device_node *np)
 {
 	static bool initialized = false;
 	void __iomem *base;
-	int irq;
+	int irq, ret = -EINVAL;
 	u32 irq_num = 0;
 	struct clk *clk1, *clk2;
 	const char *name = of_get_property(np, "compatible", NULL);
 
 	base = of_iomap(np, 0);
-	if (WARN_ON(!base))
-		return;
+	if (!base)
+		return -ENXIO;
 
 	/* Ensure timers are disabled */
 	writel(0, base + TIMER_CTRL);
 	writel(0, base + TIMER_2_BASE + TIMER_CTRL);
 
-	if (initialized || !of_device_is_available(np))
+	if (initialized || !of_device_is_available(np)) {
+		ret = -EINVAL;
 		goto err;
+	}
 
 	clk1 = of_clk_get(np, 0);
 	if (IS_ERR(clk1))
@@ -256,35 +261,53 @@ static void __init sp804_of_init(struct device_node *np)
 
 	of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
 	if (irq_num == 2) {
-		__sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
-		__sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
+
+		ret = __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
+		if (ret)
+			goto err;
+
+		ret = __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
+		if (ret)
+			goto err;
 	} else {
-		__sp804_clockevents_init(base, irq, clk1 , name);
-		__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
-							 name, clk2, 1);
+
+		ret = __sp804_clockevents_init(base, irq, clk1 , name);
+		if (ret)
+			goto err;
+
+		ret =__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
+							      name, clk2, 1);
+		if (ret)
+			goto err;
 	}
 	initialized = true;
 
-	return;
+	return 0;
 err:
 	iounmap(base);
+	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
 
-static void __init integrator_cp_of_init(struct device_node *np)
+static int __init integrator_cp_of_init(struct device_node *np)
 {
 	static int init_count = 0;
 	void __iomem *base;
-	int irq;
+	int irq, ret = -EINVAL;
 	const char *name = of_get_property(np, "compatible", NULL);
 	struct clk *clk;
 
 	base = of_iomap(np, 0);
-	if (WARN_ON(!base))
-		return;
+	if (!base) {
+		pr_err("Failed to iomap");
+		return -ENXIO;
+	}
+
 	clk = of_clk_get(np, 0);
-	if (WARN_ON(IS_ERR(clk)))
-		return;
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get clock");
+		return PTR_ERR(clk);
+	}
 
 	/* Ensure timer is disabled */
 	writel(0, base + TIMER_CTRL);
@@ -292,19 +315,24 @@ static void __init integrator_cp_of_init(struct device_node *np)
 	if (init_count == 2 || !of_device_is_available(np))
 		goto err;
 
-	if (!init_count)
-		__sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
-	else {
+	if (!init_count) {
+		ret = __sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
+		if (ret)
+			goto err;
+	} else {
 		irq = irq_of_parse_and_map(np, 0);
 		if (irq <= 0)
 			goto err;
 
-		__sp804_clockevents_init(base, irq, clk, name);
+		ret = __sp804_clockevents_init(base, irq, clk, name);
+		if (ret)
+			goto err;
 	}
 
 	init_count++;
-	return;
+	return 0;
 err:
 	iounmap(base);
+	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);

drivers/clocksource/timer-stm32.c

@@ -98,7 +98,7 @@ static struct stm32_clock_event_ddata clock_event_ddata = {
 	},
 };
 
-static void __init stm32_clockevent_init(struct device_node *np)
+static int __init stm32_clockevent_init(struct device_node *np)
 {
 	struct stm32_clock_event_ddata *data = &clock_event_ddata;
 	struct clk *clk;
@@ -130,12 +130,14 @@ static void __init stm32_clockevent_init(struct device_node *np)
 
 	data->base = of_iomap(np, 0);
 	if (!data->base) {
+		ret = -ENXIO;
 		pr_err("failed to map registers for clockevent\n");
 		goto err_iomap;
 	}
 
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
+		ret = -EINVAL;
 		pr_err("%s: failed to get irq.\n", np->full_name);
 		goto err_get_irq;
 	}
@@ -173,7 +175,7 @@ static void __init stm32_clockevent_init(struct device_node *np)
 	pr_info("%s: STM32 clockevent driver initialized (%d bits)\n",
 			np->full_name, bits);
 
-	return;
+	return ret;
 
 err_get_irq:
 	iounmap(data->base);
@@ -182,7 +184,7 @@ static void __init stm32_clockevent_init(struct device_node *np)
 err_clk_enable:
 	clk_put(clk);
 err_clk_get:
-	return;
+	return ret;
 }
 
 CLOCKSOURCE_OF_DECLARE(stm32, "st,stm32-timer", stm32_clockevent_init);

drivers/clocksource/timer-sun5i.c

@@ -311,33 +311,42 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 	return ret;
 }
 
-static void __init sun5i_timer_init(struct device_node *node)
+static int __init sun5i_timer_init(struct device_node *node)
 {
 	struct reset_control *rstc;
 	void __iomem *timer_base;
 	struct clk *clk;
-	int irq;
+	int irq, ret;
 
 	timer_base = of_io_request_and_map(node, 0, of_node_full_name(node));
-	if (IS_ERR(timer_base))
-		panic("Can't map registers");
+	if (IS_ERR(timer_base)) {
+		pr_err("Can't map registers");
+		return PTR_ERR(timer_base);;
+	}
 
 	irq = irq_of_parse_and_map(node, 0);
-	if (irq <= 0)
-		panic("Can't parse IRQ");
+	if (irq <= 0) {
+		pr_err("Can't parse IRQ");
+		return -EINVAL;
+	}
 
 	clk = of_clk_get(node, 0);
-	if (IS_ERR(clk))
-		panic("Can't get timer clock");
+	if (IS_ERR(clk)) {
+		pr_err("Can't get timer clock");
+		return PTR_ERR(clk);
+	}
 
 	rstc = of_reset_control_get(node, NULL);
 	if (!IS_ERR(rstc))
 		reset_control_deassert(rstc);
 
-	sun5i_setup_clocksource(node, timer_base, clk, irq);
-	sun5i_setup_clockevent(node, timer_base, clk, irq);
+	ret = sun5i_setup_clocksource(node, timer_base, clk, irq);
+	if (ret)
+		return ret;
+
+	return sun5i_setup_clockevent(node, timer_base, clk, irq);
 }
 CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer",
-		       sun5i_timer_init);
+			   sun5i_timer_init);
 CLOCKSOURCE_OF_DECLARE(sun7i_a20, "allwinner,sun7i-a20-hstimer",
-		       sun5i_timer_init);
+			   sun5i_timer_init);

drivers/clocksource/timer-ti-32k.c

@@ -88,14 +88,14 @@ static u64 notrace omap_32k_read_sched_clock(void)
 	return ti_32k_read_cycles(&ti_32k_timer.cs);
 }
 
-static void __init ti_32k_timer_init(struct device_node *np)
+static int __init ti_32k_timer_init(struct device_node *np)
 {
 	int ret;
 
 	ti_32k_timer.base = of_iomap(np, 0);
 	if (!ti_32k_timer.base) {
 		pr_err("Can't ioremap 32k timer base\n");
-		return;
+		return -ENXIO;
 	}
 
 	ti_32k_timer.counter = ti_32k_timer.base;
@@ -116,11 +116,13 @@ static void __init ti_32k_timer_init(struct device_node *np)
 	ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
 	if (ret) {
 		pr_err("32k_counter: can't register clocksource\n");
-		return;
+		return ret;
 	}
 
 	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
 	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
 		ti_32k_timer_init);

drivers/clocksource/timer-u300.c

@@ -359,27 +359,37 @@ static struct delay_timer u300_delay_timer;
 /*
  * This sets up the system timers, clock source and clock event.
  */
-static void __init u300_timer_init_of(struct device_node *np)
+static int __init u300_timer_init_of(struct device_node *np)
 {
 	unsigned int irq;
 	struct clk *clk;
 	unsigned long rate;
+	int ret;
 
 	u300_timer_base = of_iomap(np, 0);
-	if (!u300_timer_base)
-		panic("could not ioremap system timer\n");
+	if (!u300_timer_base) {
+		pr_err("could not ioremap system timer\n");
+		return -ENXIO;
+	}
 
 	/* Get the IRQ for the GP1 timer */
 	irq = irq_of_parse_and_map(np, 2);
-	if (!irq)
-		panic("no IRQ for system timer\n");
+	if (!irq) {
+		pr_err("no IRQ for system timer\n");
+		return -EINVAL;
+	}
 
 	pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);
 
 	/* Clock the interrupt controller */
 	clk = of_clk_get(np, 0);
-	BUG_ON(IS_ERR(clk));
-	clk_prepare_enable(clk);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
 	rate = clk_get_rate(clk);
 
 	u300_clockevent_data.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
@@ -410,7 +420,9 @@ static void __init u300_timer_init_of(struct device_node *np)
 		u300_timer_base + U300_TIMER_APP_RGPT1);
 
 	/* Set up the IRQ handler */
-	setup_irq(irq, &u300_timer_irq);
+	ret = setup_irq(irq, &u300_timer_irq);
+	if (ret)
+		return ret;
 
 	/* Reset the General Purpose timer 2 */
 	writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
@@ -428,9 +440,12 @@ static void __init u300_timer_init_of(struct device_node *np)
 		u300_timer_base + U300_TIMER_APP_EGPT2);
 
 	/* Use general purpose timer 2 as clock source */
-	if (clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC,
-			"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
+	ret = clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC,
+				    "GPT2", rate, 300, 32, clocksource_mmio_readl_up);
+	if (ret) {
 		pr_err("timer: failed to initialize U300 clock source\n");
+		return ret;
+	}
 
 	/* Configure and register the clockevent */
 	clockevents_config_and_register(&u300_clockevent_data.cevd, rate,
@@ -440,6 +455,7 @@ static void __init u300_timer_init_of(struct device_node *np)
 	 * TODO: init and register the rest of the timers too, they can be
 	 * used by hrtimers!
 	 */
+	return 0;
 }
 
 CLOCKSOURCE_OF_DECLARE(u300_timer, "stericsson,u300-apptimer",

drivers/clocksource/versatile.c

@@ -25,16 +25,18 @@ static u64 notrace versatile_sys_24mhz_read(void)
 	return readl(versatile_sys_24mhz);
 }
 
-static void __init versatile_sched_clock_init(struct device_node *node)
+static int __init versatile_sched_clock_init(struct device_node *node)
 {
 	void __iomem *base = of_iomap(node, 0);
 
 	if (!base)
-		return;
+		return -ENXIO;
 
 	versatile_sys_24mhz = base + SYS_24MHZ;
 
 	sched_clock_register(versatile_sys_24mhz_read, 32, 24000000);
+
+	return 0;
 }
 CLOCKSOURCE_OF_DECLARE(vexpress, "arm,vexpress-sysreg",
 		       versatile_sched_clock_init);

drivers/clocksource/vf_pit_timer.c

@@ -156,15 +156,18 @@ static int __init pit_clockevent_init(unsigned long rate, int irq)
 	return 0;
 }
 
-static void __init pit_timer_init(struct device_node *np)
+static int __init pit_timer_init(struct device_node *np)
 {
 	struct clk *pit_clk;
 	void __iomem *timer_base;
 	unsigned long clk_rate;
-	int irq;
+	int irq, ret;
 
 	timer_base = of_iomap(np, 0);
-	BUG_ON(!timer_base);
+	if (!timer_base) {
+		pr_err("Failed to iomap");
+		return -ENXIO;
+	}
 
 	/*
 	 * PIT0 and PIT1 can be chained to build a 64-bit timer,
@@ -175,12 +178,16 @@ static void __init pit_timer_init(struct device_node *np)
 	clkevt_base = timer_base + PITn_OFFSET(3);
 
 	irq = irq_of_parse_and_map(np, 0);
-	BUG_ON(irq <= 0);
+	if (irq <= 0)
+		return -EINVAL;
 
 	pit_clk = of_clk_get(np, 0);
-	BUG_ON(IS_ERR(pit_clk));
+	if (IS_ERR(pit_clk))
+		return PTR_ERR(pit_clk);
 
-	BUG_ON(clk_prepare_enable(pit_clk));
+	ret = clk_prepare_enable(pit_clk);
+	if (ret)
+		return ret;
 
 	clk_rate = clk_get_rate(pit_clk);
 	cycle_per_jiffy = clk_rate / (HZ);
@@ -188,8 +195,10 @@ static void __init pit_timer_init(struct device_node *np)
 	/* enable the pit module */
 	__raw_writel(~PITMCR_MDIS, timer_base + PITMCR);
 
-	BUG_ON(pit_clocksource_init(clk_rate));
+	ret = pit_clocksource_init(clk_rate);
+	if (ret)
+		return ret;
 
-	pit_clockevent_init(clk_rate, irq);
+	return pit_clockevent_init(clk_rate, irq);
 }
 CLOCKSOURCE_OF_DECLARE(vf610, "fsl,vf610-pit", pit_timer_init);

drivers/clocksource/vt8500_timer.c

@@ -121,38 +121,48 @@ static struct irqaction irq = {
 	.dev_id  = &clockevent,
 };
 
-static void __init vt8500_timer_init(struct device_node *np)
+static int __init vt8500_timer_init(struct device_node *np)
 {
-	int timer_irq;
+	int timer_irq, ret;
 
 	regbase = of_iomap(np, 0);
 	if (!regbase) {
 		pr_err("%s: Missing iobase description in Device Tree\n",
 								__func__);
-		return;
+		return -ENXIO;
 	}
+
 	timer_irq = irq_of_parse_and_map(np, 0);
 	if (!timer_irq) {
 		pr_err("%s: Missing irq description in Device Tree\n",
 								__func__);
-		return;
+		return -EINVAL;
 	}
 
 	writel(1, regbase + TIMER_CTRL_VAL);
 	writel(0xf, regbase + TIMER_STATUS_VAL);
 	writel(~0, regbase + TIMER_MATCH_VAL);
 
-	if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
+	ret = clocksource_register_hz(&clocksource, VT8500_TIMER_HZ);
+	if (ret) {
 		pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
-					__func__, clocksource.name);
+		       __func__, clocksource.name);
+		return ret;
+	}
 
 	clockevent.cpumask = cpumask_of(0);
 
-	if (setup_irq(timer_irq, &irq))
+	ret = setup_irq(timer_irq, &irq);
+	if (ret) {
 		pr_err("%s: setup_irq failed for %s\n", __func__,
 							clockevent.name);
+		return ret;
+	}
+
 	clockevents_config_and_register(&clockevent, VT8500_TIMER_HZ,
 					MIN_OSCR_DELTA * 2, 0xf0000000);
+
+	return 0;
 }
 
 CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init);

drivers/clocksource/zevio-timer.c

@@ -210,9 +210,9 @@ static int __init zevio_timer_add(struct device_node *node)
 	return ret;
 }
 
-static void __init zevio_timer_init(struct device_node *node)
+static int __init zevio_timer_init(struct device_node *node)
 {
-	BUG_ON(zevio_timer_add(node));
+	return zevio_timer_add(node);
 }
 
 CLOCKSOURCE_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_init);

include/clocksource/timer-sp804.h

@@ -3,10 +3,10 @@
 
 struct clk;
 
-void __sp804_clocksource_and_sched_clock_init(void __iomem *,
-					      const char *, struct clk *, int);
-void __sp804_clockevents_init(void __iomem *, unsigned int,
-			      struct clk *, const char *);
+int __sp804_clocksource_and_sched_clock_init(void __iomem *,
+					     const char *, struct clk *, int);
+int __sp804_clockevents_init(void __iomem *, unsigned int,
+			     struct clk *, const char *);
 void sp804_timer_disable(void __iomem *);
 
 static inline void sp804_clocksource_init(void __iomem *base, const char *name)

include/linux/clk.h

@@ -461,6 +461,10 @@ static inline struct clk *clk_get_parent(struct clk *clk)
 	return NULL;
 }
 
+static inline struct clk *clk_get_sys(const char *dev_id, const char *con_id)
+{
+	return NULL;
+}
 #endif
 
 /* clk_prepare_enable helps cases using clk_enable in non-atomic context. */

include/linux/clocksource.h

@@ -244,7 +244,7 @@ extern int clocksource_mmio_init(void __iomem *, const char *,
 extern int clocksource_i8253_init(void);
 
 #define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \
-	OF_DECLARE_1(clksrc, name, compat, fn)
+	OF_DECLARE_1_RET(clksrc, name, compat, fn)
 
 #ifdef CONFIG_CLKSRC_PROBE
 extern void clocksource_probe(void);

include/linux/of.h

@@ -1009,10 +1009,13 @@ static inline int of_get_available_child_count(const struct device_node *np)
 #endif
 
 typedef int (*of_init_fn_2)(struct device_node *, struct device_node *);
+typedef int (*of_init_fn_1_ret)(struct device_node *);
 typedef void (*of_init_fn_1)(struct device_node *);
 
 #define OF_DECLARE_1(table, name, compat, fn) \
 		_OF_DECLARE(table, name, compat, fn, of_init_fn_1)
+#define OF_DECLARE_1_RET(table, name, compat, fn) \
+		_OF_DECLARE(table, name, compat, fn, of_init_fn_1_ret)
 #define OF_DECLARE_2(table, name, compat, fn) \
 		_OF_DECLARE(table, name, compat, fn, of_init_fn_2)