[ARM] 4457/2: davinci: GPIO support

Support GPIO driver for TI DaVinci SoC
Signed-off-by: Vladimir Barinov <vbarino@ru.mvista.com>
Acked-by: David Brownell <david-b@pacbell.net>
Acked-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/Kconfig

@@ -384,6 +384,7 @@ config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
 	help
 	  Support for TI's DaVinci platform.
 

arch/arm/mach-davinci/Makefile

@@ -4,7 +4,8 @@
 #
 
 # Common objects
-obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o
+obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
+			   gpio.o
 
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  += board-evm.o

arch/arm/mach-davinci/gpio.c

+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+
+#include <asm/arch/irqs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio.h>
+
+#include <asm/mach/irq.h>
+
+static DEFINE_SPINLOCK(gpio_lock);
+static DECLARE_BITMAP(gpio_in_use, DAVINCI_N_GPIO);
+
+int gpio_request(unsigned gpio, const char *tag)
+{
+	if (gpio >= DAVINCI_N_GPIO)
+		return -EINVAL;
+
+	if (test_and_set_bit(gpio, gpio_in_use))
+		return -EBUSY;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	if (gpio >= DAVINCI_N_GPIO)
+		return;
+
+	clear_bit(gpio, gpio_in_use);
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* create a non-inlined version */
+static struct gpio_controller *__iomem gpio2controller(unsigned gpio)
+{
+	return __gpio_to_controller(gpio);
+}
+
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+void __gpio_set(unsigned gpio, int value)
+{
+	struct gpio_controller *__iomem g = gpio2controller(gpio);
+
+	__raw_writel(__gpio_mask(gpio), value ? &g->set_data : &g->clr_data);
+}
+EXPORT_SYMBOL(__gpio_set);
+
+
+/*
+ * Read the pin's value (works even if it's set up as output);
+ * returns zero/nonzero.
+ *
+ * Note that changes are synched to the GPIO clock, so reading values back
+ * right after you've set them may give old values.
+ */
+int __gpio_get(unsigned gpio)
+{
+	struct gpio_controller *__iomem g = gpio2controller(gpio);
+
+	return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+}
+EXPORT_SYMBOL(__gpio_get);
+
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * board setup code *MUST* set PINMUX0 and PINMUX1 as
+ * needed, and enable the GPIO clock.
+ */
+
+int gpio_direction_input(unsigned gpio)
+{
+	struct gpio_controller *__iomem g = gpio2controller(gpio);
+	u32 temp;
+	u32 mask;
+
+	if (!g)
+		return -EINVAL;
+
+	spin_lock(&gpio_lock);
+	mask = __gpio_mask(gpio);
+	temp = __raw_readl(&g->dir);
+	temp |= mask;
+	__raw_writel(temp, &g->dir);
+	spin_unlock(&gpio_lock);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	struct gpio_controller *__iomem g = gpio2controller(gpio);
+	u32 temp;
+	u32 mask;
+
+	if (!g)
+		return -EINVAL;
+
+	spin_lock(&gpio_lock);
+	mask = __gpio_mask(gpio);
+	temp = __raw_readl(&g->dir);
+	temp &= ~mask;
+	__raw_writel(mask, value ? &g->set_data : &g->clr_data);
+	__raw_writel(temp, &g->dir);
+	spin_unlock(&gpio_lock);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+/*
+ * We expect irqs will normally be set up as input pins, but they can also be
+ * used as output pins ... which is convenient for testing.
+ *
+ * NOTE:  GPIO0..GPIO7 also have direct INTC hookups, which work in addition
+ * to their GPIOBNK0 irq (but with a bit less overhead).  But we don't have
+ * a good way to hook those up ...
+ *
+ * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
+ * serve as EDMA event triggers.
+ */
+
+static void gpio_irq_disable(unsigned irq)
+{
+	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	u32 mask = __gpio_mask(irq_to_gpio(irq));
+
+	__raw_writel(mask, &g->clr_falling);
+	__raw_writel(mask, &g->clr_rising);
+}
+
+static void gpio_irq_enable(unsigned irq)
+{
+	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	u32 mask = __gpio_mask(irq_to_gpio(irq));
+
+	if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING)
+		__raw_writel(mask, &g->set_falling);
+	if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING)
+		__raw_writel(mask, &g->set_rising);
+}
+
+static int gpio_irq_type(unsigned irq, unsigned trigger)
+{
+	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	u32 mask = __gpio_mask(irq_to_gpio(irq));
+
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
+	irq_desc[irq].status |= trigger;
+
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+		     ? &g->set_falling : &g->clr_falling);
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+		     ? &g->set_rising : &g->clr_rising);
+	return 0;
+}
+
+static struct irq_chip gpio_irqchip = {
+	.name		= "GPIO",
+	.enable		= gpio_irq_enable,
+	.disable	= gpio_irq_disable,
+	.set_type	= gpio_irq_type,
+};
+
+static void
+gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	u32 mask = 0xffff;
+
+	/* we only care about one bank */
+	if (irq & 1)
+		mask <<= 16;
+
+	/* temporarily mask (level sensitive) parent IRQ */
+	desc->chip->ack(irq);
+	while (1) {
+		u32		status;
+		struct irq_desc	*gpio;
+		int		n;
+		int		res;
+
+		/* ack any irqs */
+		status = __raw_readl(&g->intstat) & mask;
+		if (!status)
+			break;
+		__raw_writel(status, &g->intstat);
+		if (irq & 1)
+			status >>= 16;
+
+		/* now demux them to the right lowlevel handler */
+		n = (int)get_irq_data(irq);
+		gpio = &irq_desc[n];
+		while (status) {
+			res = ffs(status);
+			n += res;
+			gpio += res;
+			desc_handle_irq(n - 1, gpio - 1);
+			status >>= res;
+		}
+	}
+	desc->chip->unmask(irq);
+	/* now it may re-trigger */
+}
+
+/*
+ * NOTE:  for suspend/resume, probably best to make a sysdev (and class)
+ * with its suspend/resume calls hooking into the results of the set_wake()
+ * calls ... so if no gpios are wakeup events the clock can be disabled,
+ * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
+ * can be set appropriately for GPIOV33 pins.
+ */
+
+static int __init davinci_gpio_irq_setup(void)
+{
+	unsigned	gpio, irq, bank;
+	struct clk	*clk;
+
+	clk = clk_get(NULL, "gpio");
+	if (IS_ERR(clk)) {
+		printk(KERN_ERR "Error %ld getting gpio clock?\n",
+		       PTR_ERR(clk));
+		return 0;
+	}
+
+	clk_enable(clk);
+
+	for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
+	     gpio < DAVINCI_N_GPIO; bank++) {
+		struct gpio_controller	*__iomem g = gpio2controller(gpio);
+		unsigned		i;
+
+		__raw_writel(~0, &g->clr_falling);
+		__raw_writel(~0, &g->clr_rising);
+
+		/* set up all irqs in this bank */
+		set_irq_chained_handler(bank, gpio_irq_handler);
+		set_irq_chip_data(bank, g);
+		set_irq_data(bank, (void *)irq);
+
+		for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
+		     i++, irq++, gpio++) {
+			set_irq_chip(irq, &gpio_irqchip);
+			set_irq_chip_data(irq, g);
+			set_irq_handler(irq, handle_simple_irq);
+			set_irq_flags(irq, IRQF_VALID);
+		}
+	}
+
+	/* BINTEN -- per-bank interrupt enable. genirq would also let these
+	 * bits be set/cleared dynamically.
+	 */
+	__raw_writel(0x1f, (void *__iomem)
+		     IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
+
+	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
+
+	return 0;
+}
+
+arch_initcall(davinci_gpio_irq_setup);

include/asm-arm/arch-davinci/gpio.h

+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__DAVINCI_GPIO_H
+#define	__DAVINCI_GPIO_H
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation, and maybe
+ * for later updates, code should write GPIO(N) or:
+ *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
+ *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
+ *
+ * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
+ * for now, that's != GPIO(N)
+ */
+#define	GPIO(X)		(X)		/* 0 <= X <= 70 */
+#define	GPIOV18(X)	(X)		/* 1.8V i/o; 0 <= X <= 53 */
+#define	GPIOV33(X)	((X)+54)	/* 3.3V i/o; 0 <= X <= 17 */
+
+struct gpio_controller {
+	u32	dir;
+	u32	out_data;
+	u32	set_data;
+	u32	clr_data;
+	u32	in_data;
+	u32	set_rising;
+	u32	clr_rising;
+	u32	set_falling;
+	u32	clr_falling;
+	u32	intstat;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct gpio_controller *__iomem
+__gpio_to_controller(unsigned gpio)
+{
+	void *__iomem ptr;
+
+	if (gpio < 32)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+	else if (gpio < 64)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+	else if (gpio < DAVINCI_N_GPIO)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+	else
+		ptr = NULL;
+	return ptr;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+/* The get/set/clear functions will inline when called with constant
+ * parameters, for low-overhead bitbanging.  Illegal constant parameters
+ * cause link-time errors.
+ *
+ * Otherwise, calls with variable parameters use outlined functions.
+ */
+extern int __error_inval_gpio(void);
+
+extern void __gpio_set(unsigned gpio, int value);
+extern int __gpio_get(unsigned gpio);
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(value)) {
+		struct gpio_controller	*__iomem g;
+		u32			mask;
+
+		if (gpio >= DAVINCI_N_GPIO)
+			__error_inval_gpio();
+
+		g = __gpio_to_controller(gpio);
+		mask = __gpio_mask(gpio);
+		if (value)
+			__raw_writel(mask, &g->set_data);
+		else
+			__raw_writel(mask, &g->clr_data);
+		return;
+	}
+
+	__gpio_set(gpio, value);
+}
+
+/* Returns zero or nonzero; works for gpios configured as inputs OR
+ * as outputs.
+ *
+ * NOTE: changes in reported values are synchronized to the GPIO clock.
+ * This is most easily seen after calling gpio_set_value() and then immediatly
+ * gpio_get_value(), where the gpio_get_value() would return the old value
+ * until the GPIO clock ticks and the new value gets latched.
+ */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	struct gpio_controller *__iomem g;
+
+	if (!__builtin_constant_p(gpio))
+		return __gpio_get(gpio);
+
+	if (gpio >= DAVINCI_N_GPIO)
+		return __error_inval_gpio();
+
+	g = __gpio_to_controller(gpio);
+	return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+}
+
+/* powerup default direction is IN */
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+#include <asm-generic/gpio.h>	/* cansleep wrappers */
+
+extern int gpio_request(unsigned gpio, const char *tag);
+extern void gpio_free(unsigned gpio);
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return DAVINCI_N_AINTC_IRQ + gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - DAVINCI_N_AINTC_IRQ;
+}
+
+#endif				/* __DAVINCI_GPIO_H */

include/asm-arm/arch-davinci/hardware.h

@@ -11,4 +11,42 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
+/*
+ * Base register addresses
+ */
+#define DAVINCI_DMA_3PCC_BASE			(0x01C00000)
+#define DAVINCI_DMA_3PTC0_BASE			(0x01C10000)
+#define DAVINCI_DMA_3PTC1_BASE			(0x01C10400)
+#define DAVINCI_I2C_BASE			(0x01C21000)
+#define DAVINCI_PWM0_BASE			(0x01C22000)
+#define DAVINCI_PWM1_BASE			(0x01C22400)
+#define DAVINCI_PWM2_BASE			(0x01C22800)
+#define DAVINCI_SYSTEM_MODULE_BASE		(0x01C40000)
+#define DAVINCI_PLL_CNTRL0_BASE			(0x01C40800)
+#define DAVINCI_PLL_CNTRL1_BASE			(0x01C40C00)
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE		(0x01C41000)
+#define DAVINCI_SYSTEM_DFT_BASE			(0x01C42000)
+#define DAVINCI_IEEE1394_BASE			(0x01C60000)
+#define DAVINCI_USB_OTG_BASE			(0x01C64000)
+#define DAVINCI_CFC_ATA_BASE			(0x01C66000)
+#define DAVINCI_SPI_BASE			(0x01C66800)
+#define DAVINCI_GPIO_BASE			(0x01C67000)
+#define DAVINCI_UHPI_BASE			(0x01C67800)
+#define DAVINCI_VPSS_REGS_BASE			(0x01C70000)
+#define DAVINCI_EMAC_CNTRL_REGS_BASE		(0x01C80000)
+#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE	(0x01C81000)
+#define DAVINCI_EMAC_WRAPPER_RAM_BASE		(0x01C82000)
+#define DAVINCI_MDIO_CNTRL_REGS_BASE		(0x01C84000)
+#define DAVINCI_IMCOP_BASE			(0x01CC0000)
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE		(0x01E00000)
+#define DAVINCI_VLYNQ_BASE			(0x01E01000)
+#define DAVINCI_MCBSP_BASE			(0x01E02000)
+#define DAVINCI_MMC_SD_BASE			(0x01E10000)
+#define DAVINCI_MS_BASE				(0x01E20000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	(0x02000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE	(0x04000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE	(0x06000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE	(0x08000000)
+#define DAVINCI_VLYNQ_REMOTE_BASE		(0x0C000000)
+
 #endif /* __ASM_ARCH_HARDWARE_H */