iio: accel: da280: convert probe to device-managed functions

This is another simple conversion to device-managed functions, requiring
the use of devm_iio_device_register() and moving the disabling of the
device on a devm_add_action_or_reset() hook.

The i2c_set_clientdata() can be removed, as the PM functions can work with
just the device object, to obtain the i2c_client object.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210628141709.80534-1-aardelean@deviqon.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/accel/da280.c

@@ -100,6 +100,11 @@ static enum da280_chipset da280_match_acpi_device(struct device *dev)
 	return (enum da280_chipset) id->driver_data;
 }
 
+static void da280_disable(void *client)
+{
+	da280_enable(client, false);
+}
+
 static int da280_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
@@ -118,7 +123,6 @@ static int da280_probe(struct i2c_client *client,
 
 	data = iio_priv(indio_dev);
 	data->client = client;
-	i2c_set_clientdata(client, indio_dev);
 
 	indio_dev->info = &da280_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
@@ -142,22 +146,11 @@ static int da280_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev, "device_register failed\n");
-		da280_enable(client, false);
-	}
-
-	return ret;
-}
-
-static int da280_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-
-	iio_device_unregister(indio_dev);
+	ret = devm_add_action_or_reset(&client->dev, da280_disable, client);
+	if (ret)
+		return ret;
 
-	return da280_enable(client, false);
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -194,7 +187,6 @@ static struct i2c_driver da280_driver = {
 		.pm = &da280_pm_ops,
 	},
 	.probe		= da280_probe,
-	.remove		= da280_remove,
 	.id_table	= da280_i2c_id,
 };