ASoC: dt-bindings: move tas2563 from tas2562.yaml to tas2781.yaml

Move tas2563 from tas2562.yaml to tas2781.yaml to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to
downloading corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240104145721.1398-1-shenghao-ding@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Documentation/devicetree/bindings/sound/tas2562.yaml

@@ -18,7 +18,6 @@ description: |
 
   Specifications about the audio amplifier can be found at:
     https://www.ti.com/lit/gpn/tas2562
-    https://www.ti.com/lit/gpn/tas2563
     https://www.ti.com/lit/gpn/tas2564
     https://www.ti.com/lit/gpn/tas2110
 
@@ -29,7 +28,6 @@ properties:
   compatible:
     enum:
       - ti,tas2562
-      - ti,tas2563
       - ti,tas2564
       - ti,tas2110
 

Documentation/devicetree/bindings/sound/ti,tas2781.yaml

@@ -5,36 +5,46 @@
 $id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments TAS2781 SmartAMP
+title: Texas Instruments TAS2563/TAS2781 SmartAMP
 
 maintainers:
   - Shenghao Ding <shenghao-ding@ti.com>
 
-description:
-  The TAS2781 is a mono, digital input Class-D audio amplifier
-  optimized for efficiently driving high peak power into small
-  loudspeakers. An integrated on-chip DSP supports Texas Instruments
-  Smart Amp speaker protection algorithm. The integrated speaker
-  voltage and current sense provides for real time
+description: |
+  The TAS2563/TAS2781 is a mono, digital input Class-D audio
+  amplifier optimized for efficiently driving high peak power into
+  small loudspeakers. An integrated on-chip DSP supports Texas
+  Instruments Smart Amp speaker protection algorithm. The
+  integrated speaker voltage and current sense provides for real time
   monitoring of loudspeaker behavior.
 
-allOf:
-  - $ref: dai-common.yaml#
+  Specifications about the audio amplifier can be found at:
+    https://www.ti.com/lit/gpn/tas2563
+    https://www.ti.com/lit/gpn/tas2781
 
 properties:
   compatible:
-    enum:
-      - ti,tas2781
+    description: |
+      ti,tas2563: 6.1-W Boosted Class-D Audio Amplifier With Integrated
+      DSP and IV Sense, 16/20/24/32bit stereo I2S or multichannel TDM.
+
+      ti,tas2781: 24-V Class-D Amplifier with Real Time Integrated Speaker
+      Protection and Audio Processing, 16/20/24/32bit stereo I2S or
+      multichannel TDM.
+    oneOf:
+      - items:
+          - enum:
+              - ti,tas2563
+          - const: ti,tas2781
+      - enum:
+          - ti,tas2781
 
   reg:
     description:
-      I2C address, in multiple tas2781s case, all the i2c address
+      I2C address, in multiple-AMP case, all the i2c address
       aggregate as one Audio Device to support multiple audio slots.
     maxItems: 8
     minItems: 1
-    items:
-      minimum: 0x38
-      maximum: 0x3f
 
   reset-gpios:
     maxItems: 1
@@ -49,6 +59,44 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas2563
+    then:
+      properties:
+        reg:
+          description:
+            I2C address, in multiple-AMP case, all the i2c address
+            aggregate as one Audio Device to support multiple audio slots.
+          maxItems: 4
+          minItems: 1
+          items:
+            minimum: 0x4c
+            maximum: 0x4f
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas2781
+    then:
+      properties:
+        reg:
+          description:
+            I2C address, in multiple-AMP case, all the i2c address
+            aggregate as one Audio Device to support multiple audio slots.
+          maxItems: 8
+          minItems: 1
+          items:
+            minimum: 0x38
+            maximum: 0x3f
+
 additionalProperties: false
 
 examples: