Commit 3dcf60bb authored by Ard Biesheuvel's avatar Ard Biesheuvel Committed by Catalin Marinas

arm64: head: Clean the ID map and the HYP text to the PoC if needed

If we enter with the MMU and caches enabled, the bootloader may not have
performed any cache maintenance to the PoC. So clean the ID mapped page
to the PoC, to ensure that instruction and data accesses with the MMU
off see the correct data. For similar reasons, clean all the HYP text to
the PoC as well when entering at EL2 with the MMU and caches enabled.

Note that this means primary_entry() itself needs to be moved into the
ID map as well, as we will return from init_kernel_el() with the MMU and
caches off.
Signed-off-by: default avatarArd Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230111102236.1430401-6-ardb@kernel.orgSigned-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
parent 32b135a7
......@@ -70,7 +70,7 @@
__EFI_PE_HEADER
__INIT
.section ".idmap.text","awx"
/*
* The following callee saved general purpose registers are used on the
......@@ -90,6 +90,17 @@ SYM_CODE_START(primary_entry)
bl record_mmu_state
bl preserve_boot_args
bl create_idmap
/*
* If we entered with the MMU and caches on, clean the ID mapped part
* of the primary boot code to the PoC so we can safely execute it with
* the MMU off.
*/
cbz x19, 0f
adrp x0, __idmap_text_start
adr_l x1, __idmap_text_end
bl dcache_clean_poc
0: mov x0, x19
bl init_kernel_el // w0=cpu_boot_mode
mov x20, x0
......@@ -111,6 +122,7 @@ SYM_CODE_START(primary_entry)
b __primary_switch
SYM_CODE_END(primary_entry)
__INIT
SYM_CODE_START_LOCAL(record_mmu_state)
mrs x19, CurrentEL
cmp x19, #CurrentEL_EL2
......@@ -507,10 +519,12 @@ SYM_FUNC_END(__primary_switched)
* Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x0 if
* booted in EL1 or EL2 respectively, with the top 32 bits containing
* potential context flags. These flags are *not* stored in __boot_cpu_mode.
*
* x0: whether we are being called from the primary boot path with the MMU on
*/
SYM_FUNC_START(init_kernel_el)
mrs x0, CurrentEL
cmp x0, #CurrentEL_EL2
mrs x1, CurrentEL
cmp x1, #CurrentEL_EL2
b.eq init_el2
SYM_INNER_LABEL(init_el1, SYM_L_LOCAL)
......@@ -525,6 +539,14 @@ SYM_INNER_LABEL(init_el1, SYM_L_LOCAL)
eret
SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
msr elr_el2, lr
// clean all HYP code to the PoC if we booted at EL2 with the MMU on
cbz x0, 0f
adrp x0, __hyp_idmap_text_start
adr_l x1, __hyp_text_end
bl dcache_clean_poc
0:
mov_q x0, HCR_HOST_NVHE_FLAGS
msr hcr_el2, x0
isb
......@@ -558,7 +580,6 @@ SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
msr sctlr_el1, x1
mov x2, xzr
2:
msr elr_el2, lr
mov w0, #BOOT_CPU_MODE_EL2
orr x0, x0, x2
eret
......@@ -569,6 +590,7 @@ SYM_FUNC_END(init_kernel_el)
* cores are held until we're ready for them to initialise.
*/
SYM_FUNC_START(secondary_holding_pen)
mov x0, xzr
bl init_kernel_el // w0=cpu_boot_mode
mrs x2, mpidr_el1
mov_q x1, MPIDR_HWID_BITMASK
......@@ -586,6 +608,7 @@ SYM_FUNC_END(secondary_holding_pen)
* be used where CPUs are brought online dynamically by the kernel.
*/
SYM_FUNC_START(secondary_entry)
mov x0, xzr
bl init_kernel_el // w0=cpu_boot_mode
b secondary_startup
SYM_FUNC_END(secondary_entry)
......
......@@ -99,6 +99,7 @@ SYM_FUNC_END(__cpu_suspend_enter)
.pushsection ".idmap.text", "awx"
SYM_CODE_START(cpu_resume)
mov x0, xzr
bl init_kernel_el
mov x19, x0 // preserve boot mode
#if VA_BITS > 48
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment