Skip to content

L
linux
Commit 3e0777b8 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/dtor/input.git manually 

Some manual fixups required due to clashes with the PF_FREEZE cleanups.
parents a94130e0 e5119885
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 2794 additions and 1944 deletions
Documentation/kernel-parameters.txt
View file @ 3e0777b8
......@@ -1115,7 +1115,7 @@ running once the system is up.
See Documentation/ramdisk.txt.
psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to
probe for (bare|imps|exps).
probe for (bare|imps|exps|lifebook|any).
psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports
per second.
psmouse.resetafter=
......
drivers/input/evdev.c
View file @ 3e0777b8
This diff is collapsed.
drivers/input/gameport/Kconfig
View file @ 3e0777b8
......@@ -49,22 +49,8 @@ config GAMEPORT_EMU10K1
To compile this driver as a module, choose M here: the
module will be called emu10k1-gp.
config GAMEPORT_VORTEX
tristate "Aureal Vortex, Vortex 2 gameport support"
depends on PCI
help
Say Y here if you have an Aureal Vortex 1 or 2 card and want
to use its gameport.
To compile this driver as a module, choose M here: the
module will be called vortex.
config GAMEPORT_FM801
tristate "ForteMedia FM801 gameport support"
depends on PCI
config GAMEPORT_CS461X
tristate "Crystal SoundFusion gameport support"
depends on PCI
endif
drivers/input/gameport/Makefile
View file @ 3e0777b8
......@@ -5,9 +5,7 @@
# Each configuration option enables a list of files.
obj-$(CONFIG_GAMEPORT) += gameport.o
obj-$(CONFIG_GAMEPORT_CS461X) += cs461x.o
obj-$(CONFIG_GAMEPORT_EMU10K1) += emu10k1-gp.o
obj-$(CONFIG_GAMEPORT_FM801) += fm801-gp.o
obj-$(CONFIG_GAMEPORT_L4) += lightning.o
obj-$(CONFIG_GAMEPORT_NS558) += ns558.o
obj-$(CONFIG_GAMEPORT_VORTEX) += vortex.o
drivers/input/gameport/cs461x.c deleted 100644 → 0
View file @ a94130e0
/*
The all defines and part of code (such as cs461x_*) are
contributed from ALSA 0.5.8 sources.
See http://www.alsa-project.org/ for sources
Tested on Linux 686 2.4.0-test9, ALSA 0.5.8a and CS4610
*/
#include <asm/io.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/config.h>
#include <linux/init.h>
#include <linux/gameport.h>
#include <linux/slab.h>
#include <linux/pci.h>
MODULE_AUTHOR("Victor Krapivin");
MODULE_LICENSE("GPL");
/*
These options are experimental
#define CS461X_FULL_MAP
*/
#ifndef PCI_VENDOR_ID_CIRRUS
#define PCI_VENDOR_ID_CIRRUS 0x1013
#endif
#ifndef PCI_DEVICE_ID_CIRRUS_4610
#define PCI_DEVICE_ID_CIRRUS_4610 0x6001
#endif
#ifndef PCI_DEVICE_ID_CIRRUS_4612
#define PCI_DEVICE_ID_CIRRUS_4612 0x6003
#endif
#ifndef PCI_DEVICE_ID_CIRRUS_4615
#define PCI_DEVICE_ID_CIRRUS_4615 0x6004
#endif
/* Registers */
#define BA0_JSPT 0x00000480
#define BA0_JSCTL 0x00000484
#define BA0_JSC1 0x00000488
#define BA0_JSC2 0x0000048C
#define BA0_JSIO 0x000004A0
/* Bits for JSPT */
#define JSPT_CAX 0x00000001
#define JSPT_CAY 0x00000002
#define JSPT_CBX 0x00000004
#define JSPT_CBY 0x00000008
#define JSPT_BA1 0x00000010
#define JSPT_BA2 0x00000020
#define JSPT_BB1 0x00000040
#define JSPT_BB2 0x00000080
/* Bits for JSCTL */
#define JSCTL_SP_MASK 0x00000003
#define JSCTL_SP_SLOW 0x00000000
#define JSCTL_SP_MEDIUM_SLOW 0x00000001
#define JSCTL_SP_MEDIUM_FAST 0x00000002
#define JSCTL_SP_FAST 0x00000003
#define JSCTL_ARE 0x00000004
/* Data register pairs masks */
#define JSC1_Y1V_MASK 0x0000FFFF
#define JSC1_X1V_MASK 0xFFFF0000
#define JSC1_Y1V_SHIFT 0
#define JSC1_X1V_SHIFT 16
#define JSC2_Y2V_MASK 0x0000FFFF
#define JSC2_X2V_MASK 0xFFFF0000
#define JSC2_Y2V_SHIFT 0
#define JSC2_X2V_SHIFT 16
/* JS GPIO */
#define JSIO_DAX 0x00000001
#define JSIO_DAY 0x00000002
#define JSIO_DBX 0x00000004
#define JSIO_DBY 0x00000008
#define JSIO_AXOE 0x00000010
#define JSIO_AYOE 0x00000020
#define JSIO_BXOE 0x00000040
#define JSIO_BYOE 0x00000080
/*
The card initialization code is obfuscated; the module cs461x
need to be loaded after ALSA modules initialized and something
played on the CS 4610 chip (see sources for details of CS4610
initialization code from ALSA)
*/
/* Card specific definitions */
#define CS461X_BA0_SIZE 0x2000
#define CS461X_BA1_DATA0_SIZE 0x3000
#define CS461X_BA1_DATA1_SIZE 0x3800
#define CS461X_BA1_PRG_SIZE 0x7000
#define CS461X_BA1_REG_SIZE 0x0100
#define BA1_SP_DMEM0 0x00000000
#define BA1_SP_DMEM1 0x00010000
#define BA1_SP_PMEM 0x00020000
#define BA1_SP_REG 0x00030000
#define BA1_DWORD_SIZE (13 * 1024 + 512)
#define BA1_MEMORY_COUNT 3
/*
Only one CS461x card is still suppoted; the code requires
redesign to avoid this limitatuion.
*/
static unsigned long ba0_addr;
static unsigned int __iomem *ba0;
#ifdef CS461X_FULL_MAP
static unsigned long ba1_addr;
static union ba1_t {
struct {
unsigned int __iomem *data0;
unsigned int __iomem *data1;
unsigned int __iomem *pmem;
unsigned int __iomem *reg;
} name;
unsigned int __iomem *idx[4];
} ba1;
static void cs461x_poke(unsigned long reg, unsigned int val)
{
writel(val, &ba1.idx[(reg >> 16) & 3][(reg >> 2) & 0x3fff]);
}
static unsigned int cs461x_peek(unsigned long reg)
{
return readl(&ba1.idx[(reg >> 16) & 3][(reg >> 2) & 0x3fff]);
}
#endif
static void cs461x_pokeBA0(unsigned long reg, unsigned int val)
{
writel(val, &ba0[reg >> 2]);
}
static unsigned int cs461x_peekBA0(unsigned long reg)
{
return readl(&ba0[reg >> 2]);
}
static int cs461x_free(struct pci_dev *pdev)
{
struct gameport *port = pci_get_drvdata(pdev);
if (port)
gameport_unregister_port(port);
if (ba0) iounmap(ba0);
#ifdef CS461X_FULL_MAP
if (ba1.name.data0) iounmap(ba1.name.data0);
if (ba1.name.data1) iounmap(ba1.name.data1);
if (ba1.name.pmem) iounmap(ba1.name.pmem);
if (ba1.name.reg) iounmap(ba1.name.reg);
#endif
return 0;
}
static void cs461x_gameport_trigger(struct gameport *gameport)
{
cs461x_pokeBA0(BA0_JSPT, 0xFF); //outb(gameport->io, 0xFF);
}
static unsigned char cs461x_gameport_read(struct gameport *gameport)
{
return cs461x_peekBA0(BA0_JSPT); //inb(gameport->io);
}
static int cs461x_gameport_cooked_read(struct gameport *gameport, int *axes, int *buttons)
{
unsigned js1, js2, jst;
js1 = cs461x_peekBA0(BA0_JSC1);
js2 = cs461x_peekBA0(BA0_JSC2);
jst = cs461x_peekBA0(BA0_JSPT);
*buttons = (~jst >> 4) & 0x0F;
axes[0] = ((js1 & JSC1_Y1V_MASK) >> JSC1_Y1V_SHIFT) & 0xFFFF;
axes[1] = ((js1 & JSC1_X1V_MASK) >> JSC1_X1V_SHIFT) & 0xFFFF;
axes[2] = ((js2 & JSC2_Y2V_MASK) >> JSC2_Y2V_SHIFT) & 0xFFFF;
axes[3] = ((js2 & JSC2_X2V_MASK) >> JSC2_X2V_SHIFT) & 0xFFFF;
for(jst=0;jst<4;++jst)
if(axes[jst]==0xFFFF) axes[jst] = -1;
return 0;
}
static int cs461x_gameport_open(struct gameport *gameport, int mode)
{
switch (mode) {
case GAMEPORT_MODE_COOKED:
case GAMEPORT_MODE_RAW:
return 0;
default:
return -1;
}
return 0;
}
static struct pci_device_id cs461x_pci_tbl[] = {
{ PCI_VENDOR_ID_CIRRUS, 0x6001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Cirrus CS4610 */
{ PCI_VENDOR_ID_CIRRUS, 0x6003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Cirrus CS4612 */
{ PCI_VENDOR_ID_CIRRUS, 0x6005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Cirrus CS4615 */
{ 0, }
};
MODULE_DEVICE_TABLE(pci, cs461x_pci_tbl);
static int __devinit cs461x_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int rc;
struct gameport* port;
rc = pci_enable_device(pdev);
if (rc) {
printk(KERN_ERR "cs461x: Cannot enable PCI gameport (bus %d, devfn %d) error=%d\n",
pdev->bus->number, pdev->devfn, rc);
return rc;
}
ba0_addr = pci_resource_start(pdev, 0);
#ifdef CS461X_FULL_MAP
ba1_addr = pci_resource_start(pdev, 1);
#endif
if (ba0_addr == 0 || ba0_addr == ~0
#ifdef CS461X_FULL_MAP
|| ba1_addr == 0 || ba1_addr == ~0
#endif
) {
printk(KERN_ERR "cs461x: wrong address - ba0 = 0x%lx\n", ba0_addr);
#ifdef CS461X_FULL_MAP
printk(KERN_ERR "cs461x: wrong address - ba1 = 0x%lx\n", ba1_addr);
#endif
cs461x_free(pdev);
return -ENOMEM;
}
ba0 = ioremap(ba0_addr, CS461X_BA0_SIZE);
#ifdef CS461X_FULL_MAP
ba1.name.data0 = ioremap(ba1_addr + BA1_SP_DMEM0, CS461X_BA1_DATA0_SIZE);
ba1.name.data1 = ioremap(ba1_addr + BA1_SP_DMEM1, CS461X_BA1_DATA1_SIZE);
ba1.name.pmem = ioremap(ba1_addr + BA1_SP_PMEM, CS461X_BA1_PRG_SIZE);
ba1.name.reg = ioremap(ba1_addr + BA1_SP_REG, CS461X_BA1_REG_SIZE);
if (ba0 == NULL || ba1.name.data0 == NULL ||
ba1.name.data1 == NULL || ba1.name.pmem == NULL ||
ba1.name.reg == NULL) {
cs461x_free(pdev);
return -ENOMEM;
}
#else
if (ba0 == NULL) {
cs461x_free(pdev);
return -ENOMEM;
}
#endif
if (!(port = gameport_allocate_port())) {
printk(KERN_ERR "cs461x: Memory allocation failed\n");
cs461x_free(pdev);
return -ENOMEM;
}
pci_set_drvdata(pdev, port);
port->open = cs461x_gameport_open;
port->trigger = cs461x_gameport_trigger;
port->read = cs461x_gameport_read;
port->cooked_read = cs461x_gameport_cooked_read;
gameport_set_name(port, "CS416x");
gameport_set_phys(port, "pci%s/gameport0", pci_name(pdev));
port->dev.parent = &pdev->dev;
cs461x_pokeBA0(BA0_JSIO, 0xFF); // ?
cs461x_pokeBA0(BA0_JSCTL, JSCTL_SP_MEDIUM_SLOW);
gameport_register_port(port);
return 0;
}
static void __devexit cs461x_pci_remove(struct pci_dev *pdev)
{
cs461x_free(pdev);
}
static struct pci_driver cs461x_pci_driver = {
.name = "CS461x_gameport",
.id_table = cs461x_pci_tbl,
.probe = cs461x_pci_probe,
.remove = __devexit_p(cs461x_pci_remove),
};
static int __init cs461x_init(void)
{
return pci_register_driver(&cs461x_pci_driver);
}
static void __exit cs461x_exit(void)
{
pci_unregister_driver(&cs461x_pci_driver);
}
module_init(cs461x_init);
module_exit(cs461x_exit);
drivers/input/gameport/ns558.c
View file @ 3e0777b8
......@@ -258,18 +258,18 @@ static int __init ns558_init(void)
{
int i = 0;
if (pnp_register_driver(&ns558_pnp_driver) >= 0)
pnp_registered = 1;
/*
* Probe ISA ports first so that PnP gets to choose free port addresses
* not occupied by the ISA ports.
* Probe ISA ports after PnP, so that PnP ports that are already
* enabled get detected as PnP. This may be suboptimal in multi-device
* configurations, but saves hassle with simple setups.
*/
while (ns558_isa_portlist[i])
ns558_isa_probe(ns558_isa_portlist[i++]);
if (pnp_register_driver(&ns558_pnp_driver) >= 0)
pnp_registered = 1;
return (list_empty(&ns558_list) && !pnp_registered) ? -ENODEV : 0;
}
......
drivers/input/gameport/vortex.c deleted 100644 → 0
View file @ a94130e0
/*
* $Id: vortex.c,v 1.5 2002/07/01 15:39:30 vojtech Exp $
*
* Copyright (c) 2000-2001 Vojtech Pavlik
*
* Based on the work of:
* Raymond Ingles
*/
/*
* Trident 4DWave and Aureal Vortex gameport driver for Linux
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
#include <asm/io.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/gameport.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Aureal Vortex and Vortex2 gameport driver");
MODULE_LICENSE("GPL");
#define VORTEX_GCR 0x0c /* Gameport control register */
#define VORTEX_LEG 0x08 /* Legacy port location */
#define VORTEX_AXD 0x10 /* Axes start */
#define VORTEX_DATA_WAIT 20 /* 20 ms */
struct vortex {
struct gameport *gameport;
struct pci_dev *dev;
unsigned char __iomem *base;
unsigned char __iomem *io;
};
static unsigned char vortex_read(struct gameport *gameport)
{
struct vortex *vortex = gameport->port_data;
return readb(vortex->io + VORTEX_LEG);
}
static void vortex_trigger(struct gameport *gameport)
{
struct vortex *vortex = gameport->port_data;
writeb(0xff, vortex->io + VORTEX_LEG);
}
static int vortex_cooked_read(struct gameport *gameport, int *axes, int *buttons)
{
struct vortex *vortex = gameport->port_data;
int i;
*buttons = (~readb(vortex->base + VORTEX_LEG) >> 4) & 0xf;
for (i = 0; i < 4; i++) {
axes[i] = readw(vortex->io + VORTEX_AXD + i * sizeof(u32));
if (axes[i] == 0x1fff) axes[i] = -1;
}
return 0;
}
static int vortex_open(struct gameport *gameport, int mode)
{
struct vortex *vortex = gameport->port_data;
switch (mode) {
case GAMEPORT_MODE_COOKED:
writeb(0x40, vortex->io + VORTEX_GCR);
msleep(VORTEX_DATA_WAIT);
return 0;
case GAMEPORT_MODE_RAW:
writeb(0x00, vortex->io + VORTEX_GCR);
return 0;
default:
return -1;
}
return 0;
}
static int __devinit vortex_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct vortex *vortex;
struct gameport *port;
int i;
vortex = kcalloc(1, sizeof(struct vortex), GFP_KERNEL);
port = gameport_allocate_port();
if (!vortex || !port) {
printk(KERN_ERR "vortex: Memory allocation failed.\n");
kfree(vortex);
gameport_free_port(port);
return -ENOMEM;
}
for (i = 0; i < 6; i++)
if (~pci_resource_flags(dev, i) & IORESOURCE_IO)
break;
pci_enable_device(dev);
vortex->dev = dev;
vortex->gameport = port;
vortex->base = ioremap(pci_resource_start(vortex->dev, i),
pci_resource_len(vortex->dev, i));
vortex->io = vortex->base + id->driver_data;
pci_set_drvdata(dev, vortex);
port->port_data = vortex;
port->fuzz = 64;
gameport_set_name(port, "AU88x0");
gameport_set_phys(port, "pci%s/gameport0", pci_name(dev));
port->dev.parent = &dev->dev;
port->read = vortex_read;
port->trigger = vortex_trigger;
port->cooked_read = vortex_cooked_read;
port->open = vortex_open;
gameport_register_port(port);
return 0;
}
static void __devexit vortex_remove(struct pci_dev *dev)
{
struct vortex *vortex = pci_get_drvdata(dev);
gameport_unregister_port(vortex->gameport);
iounmap(vortex->base);
kfree(vortex);
}
static struct pci_device_id vortex_id_table[] = {
{ 0x12eb, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x11000 },
{ 0x12eb, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x28800 },
{ 0 }
};
static struct pci_driver vortex_driver = {
.name = "vortex_gameport",
.id_table = vortex_id_table,
.probe = vortex_probe,
.remove = __devexit_p(vortex_remove),
};
static int __init vortex_init(void)
{
return pci_register_driver(&vortex_driver);
}
static void __exit vortex_exit(void)
{
pci_unregister_driver(&vortex_driver);
}
module_init(vortex_init);
module_exit(vortex_exit);
drivers/input/input.c
View file @ 3e0777b8
......@@ -219,10 +219,24 @@ void input_release_device(struct input_handle *handle)
int input_open_device(struct input_handle *handle)
{
struct input_dev *dev = handle->dev;
int err;
err = down_interruptible(&dev->sem);
if (err)
return err;
handle->open++;
if (handle->dev->open)
return handle->dev->open(handle->dev);
return 0;
if (!dev->users++ && dev->open)
err = dev->open(dev);
if (err)
handle->open--;
up(&dev->sem);
return err;
}
int input_flush_device(struct input_handle* handle, struct file* file)
......@@ -235,10 +249,17 @@ int input_flush_device(struct input_handle* handle, struct file* file)
void input_close_device(struct input_handle *handle)
{
struct input_dev *dev = handle->dev;
input_release_device(handle);
if (handle->dev->close)
handle->dev->close(handle->dev);
down(&dev->sem);
if (!--dev->users && dev->close)
dev->close(dev);
handle->open--;
up(&dev->sem);
}
static void input_link_handle(struct input_handle *handle)
......@@ -415,6 +436,8 @@ void input_register_device(struct input_dev *dev)
set_bit(EV_SYN, dev->evbit);
init_MUTEX(&dev->sem);
/*
* If delay and period are pre-set by the driver, then autorepeating
* is handled by the driver itself and we don't do it in input.c.
......@@ -674,6 +697,8 @@ static int input_handlers_read(char *buf, char **start, off_t pos, int count, in
return (count > cnt) ? cnt : count;
}
static struct file_operations input_fileops;
static int __init input_proc_init(void)
{
struct proc_dir_entry *entry;
......@@ -688,6 +713,8 @@ static int __init input_proc_init(void)
return -ENOMEM;
}
entry->owner = THIS_MODULE;
input_fileops = *entry->proc_fops;
entry->proc_fops = &input_fileops;
entry->proc_fops->poll = input_devices_poll;
entry = create_proc_read_entry("handlers", 0, proc_bus_input_dir, input_handlers_read, NULL);
if (entry == NULL) {
......
drivers/input/joydev.c
View file @ 3e0777b8
......@@ -285,48 +285,33 @@ static unsigned int joydev_poll(struct file *file, poll_table *wait)
(POLLIN | POLLRDNORM) : 0) | (list->joydev->exist ? 0 : (POLLHUP | POLLERR));
}
static int joydev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
static int joydev_ioctl_common(struct joydev *joydev, unsigned int cmd, void __user *argp)
{
struct joydev_list *list = file->private_data;
struct joydev *joydev = list->joydev;
struct input_dev *dev = joydev->handle.dev;
void __user *argp = (void __user *)arg;
int i, j;
if (!joydev->exist) return -ENODEV;
switch (cmd) {
case JS_SET_CAL:
return copy_from_user(&joydev->glue.JS_CORR, argp,
sizeof(struct JS_DATA_TYPE)) ? -EFAULT : 0;
sizeof(joydev->glue.JS_CORR)) ? -EFAULT : 0;
case JS_GET_CAL:
return copy_to_user(argp, &joydev->glue.JS_CORR,
sizeof(struct JS_DATA_TYPE)) ? -EFAULT : 0;
sizeof(joydev->glue.JS_CORR)) ? -EFAULT : 0;
case JS_SET_TIMEOUT:
return get_user(joydev->glue.JS_TIMEOUT, (int __user *) arg);
return get_user(joydev->glue.JS_TIMEOUT, (s32 __user *) argp);
case JS_GET_TIMEOUT:
return put_user(joydev->glue.JS_TIMEOUT, (int __user *) arg);
case JS_SET_TIMELIMIT:
return get_user(joydev->glue.JS_TIMELIMIT, (long __user *) arg);
case JS_GET_TIMELIMIT:
return put_user(joydev->glue.JS_TIMELIMIT, (long __user *) arg);
case JS_SET_ALL:
return copy_from_user(&joydev->glue, argp,
sizeof(struct JS_DATA_SAVE_TYPE)) ? -EFAULT : 0;
case JS_GET_ALL:
return copy_to_user(argp, &joydev->glue,
sizeof(struct JS_DATA_SAVE_TYPE)) ? -EFAULT : 0;
return put_user(joydev->glue.JS_TIMEOUT, (s32 __user *) argp);
case JSIOCGVERSION:
return put_user(JS_VERSION, (__u32 __user *) arg);
return put_user(JS_VERSION, (__u32 __user *) argp);
case JSIOCGAXES:
return put_user(joydev->nabs, (__u8 __user *) arg);
return put_user(joydev->nabs, (__u8 __user *) argp);
case JSIOCGBUTTONS:
return put_user(joydev->nkey, (__u8 __user *) arg);
return put_user(joydev->nkey, (__u8 __user *) argp);
case JSIOCSCORR:
if (copy_from_user(joydev->corr, argp,
sizeof(struct js_corr) * joydev->nabs))
sizeof(joydev->corr[0]) * joydev->nabs))
return -EFAULT;
for (i = 0; i < joydev->nabs; i++) {
j = joydev->abspam[i];
......@@ -335,7 +320,7 @@ static int joydev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
return 0;
case JSIOCGCORR:
return copy_to_user(argp, joydev->corr,
sizeof(struct js_corr) * joydev->nabs) ? -EFAULT : 0;
sizeof(joydev->corr[0]) * joydev->nabs) ? -EFAULT : 0;
case JSIOCSAXMAP:
if (copy_from_user(joydev->abspam, argp, sizeof(__u8) * (ABS_MAX + 1)))
return -EFAULT;
......@@ -371,6 +356,84 @@ static int joydev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
return -EINVAL;
}
#ifdef CONFIG_COMPAT
static long joydev_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct joydev_list *list = file->private_data;
struct joydev *joydev = list->joydev;
void __user *argp = (void __user *)arg;
s32 tmp32;
struct JS_DATA_SAVE_TYPE_32 ds32;
int err;
if (!joydev->exist) return -ENODEV;
switch(cmd) {
case JS_SET_TIMELIMIT:
err = get_user(tmp32, (s32 __user *) arg);
if (err == 0)
joydev->glue.JS_TIMELIMIT = tmp32;
break;
case JS_GET_TIMELIMIT:
tmp32 = joydev->glue.JS_TIMELIMIT;
err = put_user(tmp32, (s32 __user *) arg);
break;
case JS_SET_ALL:
err = copy_from_user(&ds32, argp,
sizeof(ds32)) ? -EFAULT : 0;
if (err == 0) {
joydev->glue.JS_TIMEOUT = ds32.JS_TIMEOUT;
joydev->glue.BUSY = ds32.BUSY;
joydev->glue.JS_EXPIRETIME = ds32.JS_EXPIRETIME;
joydev->glue.JS_TIMELIMIT = ds32.JS_TIMELIMIT;
joydev->glue.JS_SAVE = ds32.JS_SAVE;
joydev->glue.JS_CORR = ds32.JS_CORR;
}
break;
case JS_GET_ALL:
ds32.JS_TIMEOUT = joydev->glue.JS_TIMEOUT;
ds32.BUSY = joydev->glue.BUSY;
ds32.JS_EXPIRETIME = joydev->glue.JS_EXPIRETIME;
ds32.JS_TIMELIMIT = joydev->glue.JS_TIMELIMIT;
ds32.JS_SAVE = joydev->glue.JS_SAVE;
ds32.JS_CORR = joydev->glue.JS_CORR;
err = copy_to_user(argp, &ds32,
sizeof(ds32)) ? -EFAULT : 0;
break;
default:
err = joydev_ioctl_common(joydev, cmd, argp);
}
return err;
}
#endif /* CONFIG_COMPAT */
static int joydev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
struct joydev_list *list = file->private_data;
struct joydev *joydev = list->joydev;
void __user *argp = (void __user *)arg;
if (!joydev->exist) return -ENODEV;
switch(cmd) {
case JS_SET_TIMELIMIT:
return get_user(joydev->glue.JS_TIMELIMIT, (long __user *) arg);
case JS_GET_TIMELIMIT:
return put_user(joydev->glue.JS_TIMELIMIT, (long __user *) arg);
case JS_SET_ALL:
return copy_from_user(&joydev->glue, argp,
sizeof(joydev->glue)) ? -EFAULT : 0;
case JS_GET_ALL:
return copy_to_user(argp, &joydev->glue,
sizeof(joydev->glue)) ? -EFAULT : 0;
default:
return joydev_ioctl_common(joydev, cmd, argp);
}
}
static struct file_operations joydev_fops = {
.owner = THIS_MODULE,
.read = joydev_read,
......@@ -379,6 +442,9 @@ static struct file_operations joydev_fops = {
.open = joydev_open,
.release = joydev_release,
.ioctl = joydev_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = joydev_compat_ioctl,
#endif
.fasync = joydev_fasync,
};
......
drivers/input/joystick/a3d.c
View file @ 3e0777b8
......@@ -185,7 +185,7 @@ static void a3d_poll(struct gameport *gameport)
a3d->reads++;
if (a3d_read_packet(a3d->gameport, a3d->length, data) != a3d->length ||
data[0] != a3d->mode || a3d_csum(data, a3d->length))
a3d->bads++;
a3d->bads++;
else
a3d_read(a3d, data);
}
......
drivers/input/joystick/adi.c
View file @ 3e0777b8
......@@ -82,7 +82,7 @@ static char adi_cm2_abs[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ };
static char adi_wmf_abs[] = { ABS_WHEEL, ABS_GAS, ABS_BRAKE, ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y, ABS_HAT2X, ABS_HAT2Y };
static short adi_wmgpe_key[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_START, BTN_MODE, BTN_SELECT };
static short adi_wmi_key[] = { BTN_TRIGGER, BTN_TOP, BTN_THUMB, BTN_TOP2, BTN_BASE, BTN_BASE2, BTN_BASE3, BTN_BASE4, BTN_EXTRA };
static short adi_wmi_key[] = { BTN_TRIGGER, BTN_TOP, BTN_THUMB, BTN_TOP2, BTN_BASE, BTN_BASE2, BTN_BASE3, BTN_BASE4, BTN_EXTRA };
static short adi_wmed3d_key[] = { BTN_TRIGGER, BTN_THUMB, BTN_THUMB2, BTN_TOP, BTN_TOP2, BTN_BASE, BTN_BASE2 };
static short adi_cm2_key[] = { BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8 };
......@@ -183,7 +183,7 @@ static void adi_move_bits(struct adi_port *port, int length)
int i;
struct adi *adi = port->adi;
adi[0].idx = adi[1].idx = 0;
adi[0].idx = adi[1].idx = 0;
if (adi[0].ret <= 0 || adi[1].ret <= 0) return;
if (adi[0].data[0] & 0x20 || ~adi[1].data[0] & 0x20) return;
......
drivers/input/joystick/amijoy.c
View file @ 3e0777b8
......@@ -51,7 +51,8 @@ MODULE_PARM_DESC(map, "Map of attached joysticks in form of <a>,<b> (default is
__obsolete_setup("amijoy=");
static int amijoy_used[2] = { 0, 0 };
static int amijoy_used;
static DECLARE_MUTEX(amijoy_sem);
static struct input_dev amijoy_dev[2];
static char *amijoy_phys[2] = { "amijoy/input0", "amijoy/input1" };
......@@ -84,26 +85,30 @@ static irqreturn_t amijoy_interrupt(int irq, void *dummy, struct pt_regs *fp)
static int amijoy_open(struct input_dev *dev)
{
int *used = dev->private;
int err;
if ((*used)++)
return 0;
err = down_interruptible(&amijoy_sem);
if (err)
return err;
if (request_irq(IRQ_AMIGA_VERTB, amijoy_interrupt, 0, "amijoy", amijoy_interrupt)) {
(*used)--;
if (!amijoy_used && request_irq(IRQ_AMIGA_VERTB, amijoy_interrupt, 0, "amijoy", amijoy_interrupt)) {
printk(KERN_ERR "amijoy.c: Can't allocate irq %d\n", IRQ_AMIGA_VERTB);
return -EBUSY;
err = -EBUSY;
goto out;
}
return 0;
amijoy_used++;
out:
up(&amijoy_sem);
return err;
}
static void amijoy_close(struct input_dev *dev)
{
int *used = dev->private;
if (!--(*used))
down(&amijoysem);
if (!--amijoy_used)
free_irq(IRQ_AMIGA_VERTB, amijoy_interrupt);
up(&amijoy_sem);
}
static int __init amijoy_init(void)
......@@ -138,8 +143,6 @@ static int __init amijoy_init(void)
amijoy_dev[i].id.product = 0x0003;
amijoy_dev[i].id.version = 0x0100;
amijoy_dev[i].private = amijoy_used + i;
input_register_device(amijoy_dev + i);
printk(KERN_INFO "input: %s at joy%ddat\n", amijoy_name, i);
}
......
drivers/input/joystick/db9.c
View file @ 3e0777b8
......@@ -87,7 +87,7 @@ __obsolete_setup("db9_3=");
#define DB9_NORMAL 0x0a
#define DB9_NOSELECT 0x08
#define DB9_MAX_DEVICES 2
#define DB9_MAX_DEVICES 2
#define DB9_GENESIS6_DELAY 14
#define DB9_REFRESH_TIME HZ/100
......@@ -98,6 +98,7 @@ struct db9 {
struct pardevice *pd;
int mode;
int used;
struct semaphore sem;
char phys[2][32];
};
......@@ -503,6 +504,11 @@ static int db9_open(struct input_dev *dev)
{
struct db9 *db9 = dev->private;
struct parport *port = db9->pd->port;
int err;
err = down_interruptible(&db9->sem);
if (err)
return err;
if (!db9->used++) {
parport_claim(db9->pd);
......@@ -514,6 +520,7 @@ static int db9_open(struct input_dev *dev)
mod_timer(&db9->timer, jiffies + DB9_REFRESH_TIME);
}
up(&db9->sem);
return 0;
}
......@@ -522,12 +529,14 @@ static void db9_close(struct input_dev *dev)
struct db9 *db9 = dev->private;
struct parport *port = db9->pd->port;
down(&db9->sem);
if (!--db9->used) {
del_timer(&db9->timer);
del_timer_sync(&db9->timer);
parport_write_control(port, 0x00);
parport_data_forward(port);
parport_release(db9->pd);
}
up(&db9->sem);
}
static struct db9 __init *db9_probe(int *config, int nargs)
......@@ -563,12 +572,12 @@ static struct db9 __init *db9_probe(int *config, int nargs)
}
}
if (!(db9 = kmalloc(sizeof(struct db9), GFP_KERNEL))) {
if (!(db9 = kcalloc(1, sizeof(struct db9), GFP_KERNEL))) {
parport_put_port(pp);
return NULL;
}
memset(db9, 0, sizeof(struct db9));
init_MUTEX(&db9->sem);
db9->mode = config[1];
init_timer(&db9->timer);
db9->timer.data = (long) db9;
......
drivers/input/joystick/gamecon.c
View file @ 3e0777b8
/*
* NES, SNES, N64, MultiSystem, PSX gamepad driver for Linux
*
* Copyright (c) 1999-2004 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2004 Peter Nelson <rufus-kernel@hackish.org>
* Copyright (c) 1999-2004 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2004 Peter Nelson <rufus-kernel@hackish.org>
*
* Based on the work of:
* Andree Borrmann John Dahlstrom
* David Kuder Nathan Hand
* Andree Borrmann John Dahlstrom
* David Kuder Nathan Hand
*/
/*
......@@ -81,6 +81,7 @@ struct gc {
struct timer_list timer;
unsigned char pads[GC_MAX + 1];
int used;
struct semaphore sem;
char phys[5][32];
};
......@@ -433,7 +434,7 @@ static void gc_timer(unsigned long private)
gc_psx_read_packet(gc, data_psx, data);
for (i = 0; i < 5; i++) {
switch (data[i]) {
switch (data[i]) {
case GC_PSX_RUMBLE:
......@@ -503,22 +504,33 @@ static void gc_timer(unsigned long private)
static int gc_open(struct input_dev *dev)
{
struct gc *gc = dev->private;
int err;
err = down_interruptible(&gc->sem);
if (err)
return err;
if (!gc->used++) {
parport_claim(gc->pd);
parport_write_control(gc->pd->port, 0x04);
mod_timer(&gc->timer, jiffies + GC_REFRESH_TIME);
}
up(&gc->sem);
return 0;
}
static void gc_close(struct input_dev *dev)
{
struct gc *gc = dev->private;
down(&gc->sem);
if (!--gc->used) {
del_timer(&gc->timer);
del_timer_sync(&gc->timer);
parport_write_control(gc->pd->port, 0x00);
parport_release(gc->pd);
}
up(&gc->sem);
}
static struct gc __init *gc_probe(int *config, int nargs)
......@@ -542,11 +554,12 @@ static struct gc __init *gc_probe(int *config, int nargs)
return NULL;
}
if (!(gc = kmalloc(sizeof(struct gc), GFP_KERNEL))) {
if (!(gc = kcalloc(1, sizeof(struct gc), GFP_KERNEL))) {
parport_put_port(pp);
return NULL;
}
memset(gc, 0, sizeof(struct gc));
init_MUTEX(&gc->sem);
gc->pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
......
drivers/input/joystick/gf2k.c
View file @ 3e0777b8
......@@ -329,7 +329,7 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv)
for (i = 0; i < gf2k_axes[gf2k->id]; i++) {
gf2k->dev.absmax[gf2k_abs[i]] = (i < 2) ? gf2k->dev.abs[gf2k_abs[i]] * 2 - 32 :
gf2k->dev.abs[gf2k_abs[0]] + gf2k->dev.abs[gf2k_abs[1]] - 32;
gf2k->dev.abs[gf2k_abs[0]] + gf2k->dev.abs[gf2k_abs[1]] - 32;
gf2k->dev.absmin[gf2k_abs[i]] = 32;
gf2k->dev.absfuzz[gf2k_abs[i]] = 8;
gf2k->dev.absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0;
......
drivers/input/joystick/grip_mp.c
View file @ 3e0777b8
......@@ -171,7 +171,7 @@ static int mp_io(struct gameport* gameport, int sendflags, int sendcode, u32 *pa
*packet = 0;
raw_data = gameport_read(gameport);
if (raw_data & 1)
return IO_RETRY;
return IO_RETRY;
for (i = 0; i < 64; i++) {
raw_data = gameport_read(gameport);
......
drivers/input/joystick/iforce/iforce-main.c
View file @ 3e0777b8
......@@ -78,6 +78,7 @@ static struct iforce_device iforce_device[] = {
{ 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x06f8, 0x0004, "Gullemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //?
{ 0x0000, 0x0000, "Unknown I-Force Device [%04x:%04x]", btn_joystick, abs_joystick, ff_iforce }
};
......
drivers/input/joystick/iforce/iforce-usb.c
View file @ 3e0777b8
......@@ -229,6 +229,7 @@ static struct usb_device_id iforce_usb_ids [] = {
{ USB_DEVICE(0x061c, 0xc0a4) }, /* ACT LABS Force RS */
{ USB_DEVICE(0x06f8, 0x0001) }, /* Guillemot Race Leader Force Feedback */
{ USB_DEVICE(0x06f8, 0x0004) }, /* Guillemot Force Feedback Racing Wheel */
{ USB_DEVICE(0x06f8, 0xa302) }, /* Guillemot Jet Leader 3D */
{ } /* Terminating entry */
};
......
drivers/input/joystick/spaceball.c
View file @ 3e0777b8
......@@ -4,8 +4,8 @@
* Copyright (c) 1999-2001 Vojtech Pavlik
*
* Based on the work of:
* David Thompson
* Joseph Krahn
* David Thompson
* Joseph Krahn
*/
/*
......
drivers/input/joystick/spaceorb.c
View file @ 3e0777b8
......@@ -4,7 +4,7 @@
* Copyright (c) 1999-2001 Vojtech Pavlik
*
* Based on the work of:
* David Thompson
* David Thompson
*/
/*
......
drivers/input/joystick/tmdc.c
View file @ 3e0777b8
......@@ -79,7 +79,7 @@ static short tmdc_btn_pad[TMDC_BTN] =
{ BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_START, BTN_SELECT, BTN_TL, BTN_TR };
static short tmdc_btn_joy[TMDC_BTN] =
{ BTN_TRIGGER, BTN_THUMB, BTN_TOP, BTN_TOP2, BTN_BASE, BTN_BASE2, BTN_THUMB2, BTN_PINKIE,
BTN_BASE3, BTN_BASE4, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z };
BTN_BASE3, BTN_BASE4, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z };
static short tmdc_btn_fm[TMDC_BTN] =
{ BTN_TRIGGER, BTN_C, BTN_B, BTN_A, BTN_THUMB, BTN_X, BTN_Y, BTN_Z, BTN_TOP, BTN_TOP2 };
static short tmdc_btn_at[TMDC_BTN] =
......
drivers/input/joystick/turbografx.c
View file @ 3e0777b8
......@@ -84,6 +84,7 @@ static struct tgfx {
char phys[7][32];
int sticks;
int used;
struct semaphore sem;
} *tgfx_base[3];
/*
......@@ -99,7 +100,7 @@ static void tgfx_timer(unsigned long private)
for (i = 0; i < 7; i++)
if (tgfx->sticks & (1 << i)) {
dev = tgfx->dev + i;
dev = tgfx->dev + i;
parport_write_data(tgfx->pd->port, ~(1 << i));
data1 = parport_read_status(tgfx->pd->port) ^ 0x7f;
......@@ -122,23 +123,34 @@ static void tgfx_timer(unsigned long private)
static int tgfx_open(struct input_dev *dev)
{
struct tgfx *tgfx = dev->private;
if (!tgfx->used++) {
struct tgfx *tgfx = dev->private;
int err;
err = down_interruptible(&tgfx->sem);
if (err)
return err;
if (!tgfx->used++) {
parport_claim(tgfx->pd);
parport_write_control(tgfx->pd->port, 0x04);
mod_timer(&tgfx->timer, jiffies + TGFX_REFRESH_TIME);
mod_timer(&tgfx->timer, jiffies + TGFX_REFRESH_TIME);
}
return 0;
up(&tgfx->sem);
return 0;
}
static void tgfx_close(struct input_dev *dev)
{
struct tgfx *tgfx = dev->private;
if (!--tgfx->used) {
del_timer(&tgfx->timer);
struct tgfx *tgfx = dev->private;
down(&tgfx->sem);
if (!--tgfx->used) {
del_timer_sync(&tgfx->timer);
parport_write_control(tgfx->pd->port, 0x00);
parport_release(tgfx->pd);
parport_release(tgfx->pd);
}
up(&tgfx->sem);
}
/*
......@@ -166,11 +178,12 @@ static struct tgfx __init *tgfx_probe(int *config, int nargs)
return NULL;
}
if (!(tgfx = kmalloc(sizeof(struct tgfx), GFP_KERNEL))) {
if (!(tgfx = kcalloc(1, sizeof(struct tgfx), GFP_KERNEL))) {
parport_put_port(pp);
return NULL;
}
memset(tgfx, 0, sizeof(struct tgfx));
init_MUTEX(&tgfx->sem);
tgfx->pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
......
drivers/input/keyboard/atkbd.c
View file @ 3e0777b8
......@@ -227,7 +227,7 @@ static ssize_t atkbd_do_set_##_name(struct device *d, struct device_attribute *a
{ \
return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name); \
} \
static struct device_attribute atkbd_attr_##_name = \
static struct device_attribute atkbd_attr_##_name = \
__ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name);
ATKBD_DEFINE_ATTR(extra);
......@@ -388,7 +388,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
value = atkbd->release ? 0 :
(1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev.key)));
switch (value) { /* Workaround Toshiba laptop multiple keypress */
switch (value) { /* Workaround Toshiba laptop multiple keypress */
case 0:
atkbd->last = 0;
break;
......@@ -894,7 +894,7 @@ static int atkbd_reconnect(struct serio *serio)
if (atkbd->write) {
param[0] = (test_bit(LED_SCROLLL, atkbd->dev.led) ? 1 : 0)
| (test_bit(LED_NUML, atkbd->dev.led) ? 2 : 0)
| (test_bit(LED_CAPSL, atkbd->dev.led) ? 4 : 0);
| (test_bit(LED_CAPSL, atkbd->dev.led) ? 4 : 0);
if (atkbd_probe(atkbd))
return -1;
......
drivers/input/keyboard/corgikbd.c
View file @ 3e0777b8
......@@ -39,6 +39,7 @@
#define CORGI_KEY_CALENDER KEY_F1
#define CORGI_KEY_ADDRESS KEY_F2
#define CORGI_KEY_FN KEY_F3
#define CORGI_KEY_CANCEL KEY_F4
#define CORGI_KEY_OFF KEY_SUSPEND
#define CORGI_KEY_EXOK KEY_F5
#define CORGI_KEY_EXCANCEL KEY_F6
......@@ -46,6 +47,7 @@
#define CORGI_KEY_EXJOGUP KEY_F8
#define CORGI_KEY_JAP1 KEY_LEFTCTRL
#define CORGI_KEY_JAP2 KEY_LEFTALT
#define CORGI_KEY_MAIL KEY_F10
#define CORGI_KEY_OK KEY_F11
#define CORGI_KEY_MENU KEY_F12
#define CORGI_HINGE_0 KEY_KP0
......@@ -59,8 +61,8 @@ static unsigned char corgikbd_keycode[NR_SCANCODES] = {
KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */
CORGI_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */
CORGI_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, 0, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, /* 65-80 */
KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, 0, CORGI_KEY_FN, 0, 0, 0, 0, /* 81-96 */
KEY_SYSRQ, CORGI_KEY_JAP1, CORGI_KEY_JAP2, KEY_CANCEL, CORGI_KEY_OK, CORGI_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0, /* 97-112 */
CORGI_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, 0, CORGI_KEY_FN, 0, 0, 0, 0, /* 81-96 */
KEY_SYSRQ, CORGI_KEY_JAP1, CORGI_KEY_JAP2, CORGI_KEY_CANCEL, CORGI_KEY_OK, CORGI_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0, /* 97-112 */
CORGI_KEY_OFF, CORGI_KEY_EXOK, CORGI_KEY_EXCANCEL, CORGI_KEY_EXJOGDOWN, CORGI_KEY_EXJOGUP, 0, 0, 0, 0, 0, 0, 0, /* 113-124 */
CORGI_HINGE_0, CORGI_HINGE_1, CORGI_HINGE_2 /* 125-127 */
};
......
drivers/input/keyboard/lkkbd.c
View file @ 3e0777b8
......@@ -15,10 +15,10 @@
* information given below, I will _not_ be liable!
*
* RJ10 pinout: To DE9: Or DB25:
* 1 - RxD <----> Pin 3 (TxD) <-> Pin 2 (TxD)
* 2 - GND <----> Pin 5 (GND) <-> Pin 7 (GND)
* 4 - TxD <----> Pin 2 (RxD) <-> Pin 3 (RxD)
* 3 - +12V (from HDD drive connector), DON'T connect to DE9 or DB25!!!
* 1 - RxD <----> Pin 3 (TxD) <-> Pin 2 (TxD)
* 2 - GND <----> Pin 5 (GND) <-> Pin 7 (GND)
* 4 - TxD <----> Pin 2 (RxD) <-> Pin 3 (RxD)
* 3 - +12V (from HDD drive connector), DON'T connect to DE9 or DB25!!!
*
* Pin numbers for DE9 and DB25 are noted on the plug (quite small:). For
* RJ10, it's like this:
......
drivers/input/keyboard/locomokbd.c
View file @ 3e0777b8
......@@ -42,7 +42,7 @@ MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
MODULE_DESCRIPTION("LoCoMo keyboard driver");
MODULE_LICENSE("GPL");
#define LOCOMOKBD_NUMKEYS 128
#define LOCOMOKBD_NUMKEYS 128
#define KEY_ACTIVITY KEY_F16
#define KEY_CONTACT KEY_F18
......@@ -61,7 +61,7 @@ static unsigned char locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0, /* 90 - 99 */
0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A, /* 100 - 109 */
KEY_LEFTSHIFT, KEY_TAB, KEY_LEFTCTRL, 0, 0, 0, 0, 0, 0, 0, /* 110 - 119 */
KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
};
#define KB_ROWS 16
......@@ -82,7 +82,7 @@ struct locomokbd {
struct locomo_dev *ldev;
unsigned long base;
spinlock_t lock;
struct timer_list timer;
};
......@@ -95,7 +95,7 @@ static inline void locomokbd_charge_all(unsigned long membase)
static inline void locomokbd_activate_all(unsigned long membase)
{
unsigned long r;
locomo_writel(0, membase + LOCOMO_KSC);
r = locomo_readl(membase + LOCOMO_KIC);
r &= 0xFEFF;
......@@ -127,7 +127,7 @@ static inline void locomokbd_reset_col(unsigned long membase, int col)
*/
/* Scan the hardware keyboard and push any changes up through the input layer */
static void locomokbd_scankeyboard(struct locomokbd *locomokbd, struct pt_regs *regs)
static void locomokbd_scankeyboard(struct locomokbd *locomokbd, struct pt_regs *regs)
{
unsigned int row, col, rowd, scancode;
unsigned long flags;
......@@ -138,7 +138,7 @@ static void locomokbd_scankeyboard(struct locomokbd *locomokbd, struct pt_regs *
if (regs)
input_regs(&locomokbd->input, regs);
locomokbd_charge_all(membase);
num_pressed = 0;
......@@ -146,9 +146,9 @@ static void locomokbd_scankeyboard(struct locomokbd *locomokbd, struct pt_regs *
locomokbd_activate_col(membase, col);
udelay(KB_DELAY);
rowd = ~locomo_readl(membase + LOCOMO_KIB);
for (row = 0; row < KB_ROWS; row++ ) {
for (row = 0; row < KB_ROWS; row++) {
scancode = SCANCODE(col, row);
if (rowd & KB_ROWMASK(row)) {
num_pressed += 1;
......@@ -170,7 +170,7 @@ static void locomokbd_scankeyboard(struct locomokbd *locomokbd, struct pt_regs *
spin_unlock_irqrestore(&locomokbd->lock, flags);
}
/*
/*
* LoCoMo keyboard interrupt handler.
*/
static irqreturn_t locomokbd_interrupt(int irq, void *dev_id, struct pt_regs *regs)
......@@ -205,8 +205,8 @@ static int locomokbd_probe(struct locomo_dev *dev)
memset(locomokbd, 0, sizeof(struct locomokbd));
/* try and claim memory region */
if (!request_mem_region((unsigned long) dev->mapbase,
dev->length,
if (!request_mem_region((unsigned long) dev->mapbase,
dev->length,
LOCOMO_DRIVER_NAME(dev))) {
ret = -EBUSY;
printk(KERN_ERR "locomokbd: Can't acquire access to io memory for keyboard\n");
......@@ -225,7 +225,7 @@ static int locomokbd_probe(struct locomo_dev *dev)
locomokbd->timer.data = (unsigned long) locomokbd;
locomokbd->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
init_input_dev(&locomokbd->input);
locomokbd->input.keycode = locomokbd->keycode;
locomokbd->input.keycodesize = sizeof(unsigned char);
......@@ -271,11 +271,11 @@ static int locomokbd_probe(struct locomo_dev *dev)
static int locomokbd_remove(struct locomo_dev *dev)
{
struct locomokbd *locomokbd = locomo_get_drvdata(dev);
free_irq(dev->irq[0], locomokbd);
del_timer_sync(&locomokbd->timer);
input_unregister_device(&locomokbd->input);
locomo_set_drvdata(dev, NULL);
......
drivers/input/keyboard/maple_keyb.c
View file @ 3e0777b8
/*
* $Id: maple_keyb.c,v 1.4 2004/03/22 01:18:15 lethal Exp $
* SEGA Dreamcast keyboard driver
* SEGA Dreamcast keyboard driver
* Based on drivers/usb/usbkbd.c
*/
......@@ -40,7 +40,6 @@ struct dc_kbd {
struct input_dev dev;
unsigned char new[8];
unsigned char old[8];
int open;
};
......@@ -95,22 +94,6 @@ static void dc_kbd_callback(struct mapleq *mq)
}
}
static int dc_kbd_open(struct input_dev *dev)
{
struct dc_kbd *kbd = dev->private;
kbd->open++;
return 0;
}
static void dc_kbd_close(struct input_dev *dev)
{
struct dc_kbd *kbd = dev->private;
kbd->open--;
}
static int dc_kbd_connect(struct maple_device *dev)
{
int i;
......@@ -133,9 +116,6 @@ static int dc_kbd_connect(struct maple_device *dev)
clear_bit(0, kbd->dev.keybit);
kbd->dev.private = kbd;
kbd->dev.open = dc_kbd_open;
kbd->dev.close = dc_kbd_close;
kbd->dev.event = NULL;
kbd->dev.name = dev->product_name;
kbd->dev.id.bustype = BUS_MAPLE;
......
drivers/input/misc/uinput.c
View file @ 3e0777b8
......@@ -298,9 +298,11 @@ static int uinput_alloc_device(struct file *file, const char __user *buffer, siz
/* check if absmin/absmax/absfuzz/absflat are filled as
* told in Documentation/input/input-programming.txt */
if (test_bit(EV_ABS, dev->evbit)) {
retval = uinput_validate_absbits(dev);
if (retval < 0)
int err = uinput_validate_absbits(dev);
if (err < 0) {
retval = err;
kfree(dev->name);
}
}
exit:
......
drivers/input/mouse/Makefile
View file @ 3e0777b8
......@@ -15,4 +15,4 @@ obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o
obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
psmouse-objs := psmouse-base.o alps.o logips2pp.o synaptics.o
psmouse-objs := psmouse-base.o alps.o logips2pp.o synaptics.o lifebook.o
drivers/input/mouse/alps.c
View file @ 3e0777b8
......@@ -30,10 +30,11 @@
#define ALPS_DUALPOINT 0x01
#define ALPS_WHEEL 0x02
#define ALPS_FW_BK 0x04
#define ALPS_FW_BK_1 0x04
#define ALPS_4BTN 0x08
#define ALPS_OLDPROTO 0x10
#define ALPS_PASS 0x20
#define ALPS_FW_BK_2 0x40
static struct alps_model_info alps_model_data[] = {
{ { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */
......@@ -43,11 +44,11 @@ static struct alps_model_info alps_model_data[] = {
{ { 0x63, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
{ { 0x63, 0x02, 0x28 }, 0xf8, 0xf8, 0 },
{ { 0x63, 0x02, 0x3c }, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */
{ { 0x63, 0x02, 0x50 }, 0xef, 0xef, ALPS_FW_BK }, /* NEC Versa L320 */
{ { 0x63, 0x02, 0x50 }, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */
{ { 0x63, 0x02, 0x64 }, 0xf8, 0xf8, 0 },
{ { 0x63, 0x03, 0xc8 }, 0xf8, 0xf8, ALPS_PASS }, /* Dell Latitude D800 */
{ { 0x73, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
{ { 0x73, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
{ { 0x73, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Ahtec Laptop */
{ { 0x20, 0x02, 0x0e }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
{ { 0x22, 0x02, 0x0a }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
......@@ -61,11 +62,11 @@ static struct alps_model_info alps_model_data[] = {
/*
* ALPS abolute Mode - new format
*
* byte 0: 1 ? ? ? 1 ? ? ?
*
* byte 0: 1 ? ? ? 1 ? ? ?
* byte 1: 0 x6 x5 x4 x3 x2 x1 x0
* byte 2: 0 x10 x9 x8 x7 ? fin ges
* byte 3: 0 y9 y8 y7 1 M R L
* byte 3: 0 y9 y8 y7 1 M R L
* byte 4: 0 y6 y5 y4 y3 y2 y1 y0
* byte 5: 0 z6 z5 z4 z3 z2 z1 z0
*
......@@ -81,11 +82,12 @@ static void alps_process_packet(struct psmouse *psmouse, struct pt_regs *regs)
struct input_dev *dev = &psmouse->dev;
struct input_dev *dev2 = &priv->dev2;
int x, y, z, ges, fin, left, right, middle;
int back = 0, forward = 0;
input_regs(dev, regs);
if ((packet[0] & 0xc8) == 0x08) { /* 3-byte PS/2 packet */
input_report_key(dev2, BTN_LEFT, packet[0] & 1);
input_report_key(dev2, BTN_LEFT, packet[0] & 1);
input_report_key(dev2, BTN_RIGHT, packet[0] & 2);
input_report_key(dev2, BTN_MIDDLE, packet[0] & 4);
input_report_rel(dev2, REL_X,
......@@ -112,6 +114,18 @@ static void alps_process_packet(struct psmouse *psmouse, struct pt_regs *regs)
z = packet[5];
}
if (priv->i->flags & ALPS_FW_BK_1) {
back = packet[2] & 4;
forward = packet[0] & 0x10;
}
if (priv->i->flags & ALPS_FW_BK_2) {
back = packet[3] & 4;
forward = packet[2] & 4;
if ((middle = forward && back))
forward = back = 0;
}
ges = packet[2] & 1;
fin = packet[2] & 2;
......@@ -155,13 +169,12 @@ static void alps_process_packet(struct psmouse *psmouse, struct pt_regs *regs)
input_report_abs(dev, ABS_PRESSURE, z);
input_report_key(dev, BTN_TOOL_FINGER, z > 0);
if (priv->i->flags & ALPS_WHEEL)
input_report_rel(dev, REL_WHEEL, ((packet[0] >> 4) & 0x07) | ((packet[2] >> 2) & 0x08));
if (priv->i->flags & ALPS_FW_BK) {
input_report_key(dev, BTN_FORWARD, packet[0] & 0x10);
input_report_key(dev, BTN_BACK, packet[2] & 0x04);
if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
input_report_key(dev, BTN_FORWARD, forward);
input_report_key(dev, BTN_BACK, back);
}
input_sync(dev);
......@@ -257,7 +270,6 @@ static struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *vers
static int alps_passthrough_mode(struct psmouse *psmouse, int enable)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[3];
int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11;
if (ps2_command(ps2dev, NULL, cmd) ||
......@@ -267,7 +279,7 @@ static int alps_passthrough_mode(struct psmouse *psmouse, int enable)
return -1;
/* we may get 3 more bytes, just ignore them */
ps2_command(ps2dev, param, 0x0300);
ps2_drain(ps2dev, 3, 100);
return 0;
}
......@@ -425,7 +437,7 @@ int alps_init(struct psmouse *psmouse)
psmouse->dev.relbit[LONG(REL_WHEEL)] |= BIT(REL_WHEEL);
}
if (priv->i->flags & ALPS_FW_BK) {
if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
psmouse->dev.keybit[LONG(BTN_FORWARD)] |= BIT(BTN_FORWARD);
psmouse->dev.keybit[LONG(BTN_BACK)] |= BIT(BTN_BACK);
}
......@@ -436,8 +448,8 @@ int alps_init(struct psmouse *psmouse)
priv->dev2.id.bustype = BUS_I8042;
priv->dev2.id.vendor = 0x0002;
priv->dev2.id.product = PSMOUSE_ALPS;
priv->dev2.id.version = 0x0000;
priv->dev2.id.version = 0x0000;
priv->dev2.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
priv->dev2.relbit[LONG(REL_X)] |= BIT(REL_X) | BIT(REL_Y);
priv->dev2.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
......@@ -461,17 +473,15 @@ int alps_init(struct psmouse *psmouse)
int alps_detect(struct psmouse *psmouse, int set_properties)
{
int version;
struct alps_model_info *model;
struct alps_model_info *model;
if (!(model = alps_get_model(psmouse, &version)))
return -1;
if (set_properties) {
psmouse->vendor = "ALPS";
if (model->flags & ALPS_DUALPOINT)
psmouse->name = "DualPoint TouchPad";
else
psmouse->name = "GlidePoint";
psmouse->name = model->flags & ALPS_DUALPOINT ?
"DualPoint TouchPad" : "GlidePoint";
psmouse->model = version;
}
return 0;
......
drivers/input/mouse/amimouse.c
View file @ 3e0777b8
......@@ -33,7 +33,6 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Amiga mouse driver");
MODULE_LICENSE("GPL");
static int amimouse_used = 0;
static int amimouse_lastx, amimouse_lasty;
static struct input_dev amimouse_dev;
......@@ -81,16 +80,12 @@ static int amimouse_open(struct input_dev *dev)
{
unsigned short joy0dat;
if (amimouse_used++)
return 0;
joy0dat = custom.joy0dat;
amimouse_lastx = joy0dat & 0xff;
amimouse_lasty = joy0dat >> 8;
if (request_irq(IRQ_AMIGA_VERTB, amimouse_interrupt, 0, "amimouse", amimouse_interrupt)) {
amimouse_used--;
printk(KERN_ERR "amimouse.c: Can't allocate irq %d\n", IRQ_AMIGA_VERTB);
return -EBUSY;
}
......@@ -100,8 +95,7 @@ static int amimouse_open(struct input_dev *dev)
static void amimouse_close(struct input_dev *dev)
{
if (!--amimouse_used)
free_irq(IRQ_AMIGA_VERTB, amimouse_interrupt);
free_irq(IRQ_AMIGA_VERTB, amimouse_interrupt);
}
static int __init amimouse_init(void)
......
drivers/input/mouse/inport.c
View file @ 3e0777b8
......@@ -17,18 +17,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -87,29 +87,23 @@ MODULE_PARM_DESC(irq, "IRQ number (5=default)");
__obsolete_setup("inport_irq=");
static int inport_used;
static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static int inport_open(struct input_dev *dev)
{
if (!inport_used++) {
if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL))
return -EBUSY;
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
}
if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL))
return -EBUSY;
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
return 0;
}
static void inport_close(struct input_dev *dev)
{
if (!--inport_used) {
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
free_irq(inport_irq, NULL);
}
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
free_irq(inport_irq, NULL);
}
static struct input_dev inport_dev = {
......@@ -120,11 +114,11 @@ static struct input_dev inport_dev = {
.close = inport_close,
.name = INPORT_NAME,
.phys = "isa023c/input0",
.id = {
.bustype = BUS_ISA,
.vendor = INPORT_VENDOR,
.product = 0x0001,
.version = 0x0100,
.id = {
.bustype = BUS_ISA,
.vendor = INPORT_VENDOR,
.product = 0x0001,
.version = 0x0100,
},
};
......
drivers/input/mouse/lifebook.c 0 → 100644
View file @ 3e0777b8
/*
* Fujitsu B-series Lifebook PS/2 TouchScreen driver
*
* Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Kenan Esau <kenan.esau@conan.de>
*
* TouchScreen detection, absolute mode setting and packet layout is taken from
* Harald Hoyer's description of the device.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/libps2.h>
#include <linux/dmi.h>
#include "psmouse.h"
#include "lifebook.h"
static struct dmi_system_id lifebook_dmi_table[] = {
{
.ident = "Lifebook B",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
},
},
{ }
};
static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
{
unsigned char *packet = psmouse->packet;
struct input_dev *dev = &psmouse->dev;
if (psmouse->pktcnt != 3)
return PSMOUSE_GOOD_DATA;
input_regs(dev, regs);
/* calculate X and Y */
if ((packet[0] & 0x08) == 0x00) {
input_report_abs(dev, ABS_X,
(packet[1] | ((packet[0] & 0x30) << 4)));
input_report_abs(dev, ABS_Y,
1024 - (packet[2] | ((packet[0] & 0xC0) << 2)));
} else {
input_report_rel(dev, REL_X,
((packet[0] & 0x10) ? packet[1] - 256 : packet[1]));
input_report_rel(dev, REL_Y,
-(int)((packet[0] & 0x20) ? packet[2] - 256 : packet[2]));
}
input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
input_report_key(dev, BTN_TOUCH, packet[0] & 0x04);
input_sync(dev);
return PSMOUSE_FULL_PACKET;
}
static int lifebook_absolute_mode(struct psmouse *psmouse)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param;
if (psmouse_reset(psmouse))
return -1;
/*
Enable absolute output -- ps2_command fails always but if
you leave this call out the touchsreen will never send
absolute coordinates
*/
param = 0x07;
ps2_command(ps2dev, &param, PSMOUSE_CMD_SETRES);
return 0;
}
static void lifebook_set_resolution(struct psmouse *psmouse, unsigned int resolution)
{
unsigned char params[] = { 0, 1, 2, 2, 3 };
if (resolution == 0 || resolution > 400)
resolution = 400;
ps2_command(&psmouse->ps2dev, &params[resolution / 100], PSMOUSE_CMD_SETRES);
psmouse->resolution = 50 << params[resolution / 100];
}
static void lifebook_disconnect(struct psmouse *psmouse)
{
psmouse_reset(psmouse);
}
int lifebook_detect(struct psmouse *psmouse, int set_properties)
{
if (!dmi_check_system(lifebook_dmi_table))
return -1;
if (set_properties) {
psmouse->vendor = "Fujitsu";
psmouse->name = "Lifebook TouchScreen";
}
return 0;
}
int lifebook_init(struct psmouse *psmouse)
{
if (lifebook_absolute_mode(psmouse))
return -1;
psmouse->dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL);
psmouse->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
psmouse->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
input_set_abs_params(&psmouse->dev, ABS_X, 0, 1024, 0, 0);
input_set_abs_params(&psmouse->dev, ABS_Y, 0, 1024, 0, 0);
psmouse->protocol_handler = lifebook_process_byte;
psmouse->set_resolution = lifebook_set_resolution;
psmouse->disconnect = lifebook_disconnect;
psmouse->reconnect = lifebook_absolute_mode;
psmouse->pktsize = 3;
return 0;
}
drivers/input/mouse/lifebook.h 0 → 100644
View file @ 3e0777b8
/*
* Fujitsu B-series Lifebook PS/2 TouchScreen driver
*
* Copyright (c) 2005 Vojtech Pavlik
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef _LIFEBOOK_H
#define _LIFEBOOK_H
int lifebook_detect(struct psmouse *psmouse, int set_properties);
int lifebook_init(struct psmouse *psmouse);
#endif
drivers/input/mouse/logibm.c
View file @ 3e0777b8
......@@ -18,18 +18,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -77,16 +77,11 @@ MODULE_PARM_DESC(irq, "IRQ number (5=default)");
__obsolete_setup("logibm_irq=");
static int logibm_used = 0;
static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static int logibm_open(struct input_dev *dev)
{
if (logibm_used++)
return 0;
if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) {
logibm_used--;
printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq);
return -EBUSY;
}
......@@ -96,8 +91,6 @@ static int logibm_open(struct input_dev *dev)
static void logibm_close(struct input_dev *dev)
{
if (--logibm_used)
return;
outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
free_irq(logibm_irq, NULL);
}
......@@ -167,7 +160,7 @@ static int __init logibm_init(void)
outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
input_register_device(&logibm_dev);
printk(KERN_INFO "input: Logitech bus mouse at %#x irq %d\n", LOGIBM_BASE, logibm_irq);
return 0;
......
drivers/input/mouse/maplemouse.c
View file @ 3e0777b8
/*
* $Id: maplemouse.c,v 1.2 2004/03/22 01:18:15 lethal Exp $
* SEGA Dreamcast mouse driver
* SEGA Dreamcast mouse driver
* Based on drivers/usb/usbmouse.c
*/
......@@ -15,80 +15,51 @@
MODULE_AUTHOR("YAEGASHI Takeshi <t@keshi.org>");
MODULE_DESCRIPTION("SEGA Dreamcast mouse driver");
struct dc_mouse {
struct input_dev dev;
int open;
};
static void dc_mouse_callback(struct mapleq *mq)
{
int buttons, relx, rely, relz;
struct maple_device *mapledev = mq->dev;
struct dc_mouse *mouse = mapledev->private_data;
struct input_dev *dev = &mouse->dev;
struct input_dev *dev = mapledev->private_data;
unsigned char *res = mq->recvbuf;
buttons = ~res[8];
relx=*(unsigned short *)(res+12)-512;
rely=*(unsigned short *)(res+14)-512;
relz=*(unsigned short *)(res+16)-512;
relx = *(unsigned short *)(res + 12) - 512;
rely = *(unsigned short *)(res + 14) - 512;
relz = *(unsigned short *)(res + 16) - 512;
input_report_key(dev, BTN_LEFT, buttons&4);
input_report_key(dev, BTN_MIDDLE, buttons&9);
input_report_key(dev, BTN_RIGHT, buttons&2);
input_report_key(dev, BTN_LEFT, buttons & 4);
input_report_key(dev, BTN_MIDDLE, buttons & 9);
input_report_key(dev, BTN_RIGHT, buttons & 2);
input_report_rel(dev, REL_X, relx);
input_report_rel(dev, REL_Y, rely);
input_report_rel(dev, REL_WHEEL, relz);
input_sync(dev);
}
static int dc_mouse_open(struct input_dev *dev)
{
struct dc_mouse *mouse = dev->private;
mouse->open++;
return 0;
}
static void dc_mouse_close(struct input_dev *dev)
{
struct dc_mouse *mouse = dev->private;
mouse->open--;
}
static int dc_mouse_connect(struct maple_device *dev)
{
unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]);
struct dc_mouse *mouse;
struct input_dev *input_dev;
if (!(mouse = kmalloc(sizeof(struct dc_mouse), GFP_KERNEL)))
if (!(input_dev = kmalloc(sizeof(struct input_dev), GFP_KERNEL)))
return -1;
memset(mouse, 0, sizeof(struct dc_mouse));
dev->private_data = mouse;
mouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
mouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
mouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL);
dev->private_data = input_dev;
init_input_dev(&mouse->dev);
memset(input_dev, 0, sizeof(struct dc_mouse));
init_input_dev(input_dev);
input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL);
mouse->dev.private = mouse;
mouse->dev.open = dc_mouse_open;
mouse->dev.close = dc_mouse_close;
mouse->dev.event = NULL;
input_dev->name = dev->product_name;
input_dev->id.bustype = BUS_MAPLE;
mouse->dev.name = dev->product_name;
mouse->dev.id.bustype = BUS_MAPLE;
input_register_device(&mouse->dev);
input_register_device(input_dev);
maple_getcond_callback(dev, dc_mouse_callback, 1, MAPLE_FUNC_MOUSE);
printk(KERN_INFO "input: mouse(0x%lx): %s\n", data, mouse->dev.name);
printk(KERN_INFO "input: mouse(0x%lx): %s\n", data, input_dev->name);
return 0;
}
......@@ -96,10 +67,10 @@ static int dc_mouse_connect(struct maple_device *dev)
static void dc_mouse_disconnect(struct maple_device *dev)
{
struct dc_mouse *mouse = dev->private_data;
struct input_dev *input_dev = dev->private_data;
input_unregister_device(&mouse->dev);
kfree(mouse);
input_unregister_device(input_dev);
kfree(input_dev);
}
......
drivers/input/mouse/pc110pad.c
View file @ 3e0777b8
......@@ -4,7 +4,7 @@
* Copyright (c) 2000-2001 Vojtech Pavlik
*
* Based on the work of:
* Alan Cox Robin O'Leary
* Alan Cox Robin O'Leary
*/
/*
......@@ -56,7 +56,6 @@ static int pc110pad_io = 0x15e0;
static struct input_dev pc110pad_dev;
static int pc110pad_data[3];
static int pc110pad_count;
static int pc110pad_used;
static char *pc110pad_name = "IBM PC110 TouchPad";
static char *pc110pad_phys = "isa15e0/input0";
......@@ -74,7 +73,7 @@ static irqreturn_t pc110pad_interrupt(int irq, void *ptr, struct pt_regs *regs)
if (pc110pad_count < 3)
return IRQ_HANDLED;
input_regs(&pc110pad_dev, regs);
input_report_key(&pc110pad_dev, BTN_TOUCH,
pc110pad_data[0] & 0x01);
......@@ -90,15 +89,11 @@ static irqreturn_t pc110pad_interrupt(int irq, void *ptr, struct pt_regs *regs)
static void pc110pad_close(struct input_dev *dev)
{
if (!--pc110pad_used)
outb(PC110PAD_OFF, pc110pad_io + 2);
outb(PC110PAD_OFF, pc110pad_io + 2);
}
static int pc110pad_open(struct input_dev *dev)
{
if (pc110pad_used++)
return 0;
pc110pad_interrupt(0,NULL,NULL);
pc110pad_interrupt(0,NULL,NULL);
pc110pad_interrupt(0,NULL,NULL);
......@@ -145,7 +140,7 @@ static int __init pc110pad_init(void)
pc110pad_dev.absmax[ABS_X] = 0x1ff;
pc110pad_dev.absmax[ABS_Y] = 0x0ff;
pc110pad_dev.open = pc110pad_open;
pc110pad_dev.close = pc110pad_close;
......@@ -156,17 +151,17 @@ static int __init pc110pad_init(void)
pc110pad_dev.id.product = 0x0001;
pc110pad_dev.id.version = 0x0100;
input_register_device(&pc110pad_dev);
input_register_device(&pc110pad_dev);
printk(KERN_INFO "input: %s at %#x irq %d\n",
pc110pad_name, pc110pad_io, pc110pad_irq);
return 0;
}
static void __exit pc110pad_exit(void)
{
input_unregister_device(&pc110pad_dev);
input_unregister_device(&pc110pad_dev);
outb(PC110PAD_OFF, pc110pad_io + 2);
......
drivers/input/mouse/psmouse-base.c
View file @ 3e0777b8
This diff is collapsed.
drivers/input/mouse/psmouse.h
View file @ 3e0777b8
......@@ -77,6 +77,8 @@ enum psmouse_type {
PSMOUSE_IMEX,
PSMOUSE_SYNAPTICS,
PSMOUSE_ALPS,
PSMOUSE_LIFEBOOK,
PSMOUSE_AUTO /* This one should always be last */
};
int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command);
......@@ -99,7 +101,7 @@ static ssize_t psmouse_do_set_##_name(struct device *d, struct device_attribute
{ \
return psmouse_attr_set_helper(d, b, s, psmouse_attr_set_##_name); \
} \
static struct device_attribute psmouse_attr_##_name = \
static struct device_attribute psmouse_attr_##_name = \
__ATTR(_name, S_IWUSR | S_IRUGO, \
psmouse_do_show_##_name, psmouse_do_set_##_name);
......
drivers/input/mouse/rpcmouse.c
View file @ 3e0777b8
......@@ -59,7 +59,7 @@ static irqreturn_t rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs)
b = (short) (__raw_readl(0xe0310000) ^ 0x70);
dx = x - rpcmouse_lastx;
dy = y - rpcmouse_lasty;
dy = y - rpcmouse_lasty;
rpcmouse_lastx = x;
rpcmouse_lasty = y;
......
drivers/input/mouse/vsxxxaa.c
View file @ 3e0777b8
/*
* Driver for DEC VSXXX-AA mouse (hockey-puck mouse, ball or two rollers)
* DEC VSXXX-GA mouse (rectangular mouse, with ball)
* DEC VSXXX-AB tablet (digitizer with hair cross or stylus)
* DEC VSXXX-GA mouse (rectangular mouse, with ball)
* DEC VSXXX-AB tablet (digitizer with hair cross or stylus)
*
* Copyright (C) 2003-2004 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
*
......
drivers/input/mousedev.c
View file @ 3e0777b8
......@@ -220,6 +220,7 @@ static void mousedev_notify_readers(struct mousedev *mousedev, struct mousedev_h
struct mousedev_list *list;
struct mousedev_motion *p;
unsigned long flags;
int wake_readers = 0;
list_for_each_entry(list, &mousedev->list, node) {
spin_lock_irqsave(&list->packet_lock, flags);
......@@ -255,11 +256,14 @@ static void mousedev_notify_readers(struct mousedev *mousedev, struct mousedev_h
spin_unlock_irqrestore(&list->packet_lock, flags);
if (list->ready)
if (list->ready) {
kill_fasync(&list->fasync, SIGIO, POLL_IN);
wake_readers = 1;
}
}
wake_up_interruptible(&mousedev->wait);
if (wake_readers)
wake_up_interruptible(&mousedev->wait);
}
static void mousedev_touchpad_touch(struct mousedev *mousedev, int value)
......
drivers/input/serio/libps2.c
View file @ 3e0777b8
......@@ -29,6 +29,7 @@ MODULE_LICENSE("GPL");
EXPORT_SYMBOL(ps2_init);
EXPORT_SYMBOL(ps2_sendbyte);
EXPORT_SYMBOL(ps2_drain);
EXPORT_SYMBOL(ps2_command);
EXPORT_SYMBOL(ps2_schedule_command);
EXPORT_SYMBOL(ps2_handle_ack);
......@@ -45,11 +46,11 @@ struct ps2work {
/*
* ps2_sendbyte() sends a byte to the mouse, and waits for acknowledge.
* It doesn't handle retransmission, though it could - because when there would
* be need for retransmissions, the mouse has to be replaced anyway.
* ps2_sendbyte() sends a byte to the device and waits for acknowledge.
* It doesn't handle retransmission, though it could - because if there
* is a need for retransmissions device has to be replaced anyway.
*
* ps2_sendbyte() can only be called from a process context
* ps2_sendbyte() can only be called from a process context.
*/
int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout)
......@@ -71,6 +72,91 @@ int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout)
return -ps2dev->nak;
}
/*
* ps2_drain() waits for device to transmit requested number of bytes
* and discards them.
*/
void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout)
{
if (maxbytes > sizeof(ps2dev->cmdbuf)) {
WARN_ON(1);
maxbytes = sizeof(ps2dev->cmdbuf);
}
down(&ps2dev->cmd_sem);
serio_pause_rx(ps2dev->serio);
ps2dev->flags = PS2_FLAG_CMD;
ps2dev->cmdcnt = maxbytes;
serio_continue_rx(ps2dev->serio);
wait_event_timeout(ps2dev->wait,
!(ps2dev->flags & PS2_FLAG_CMD),
msecs_to_jiffies(timeout));
up(&ps2dev->cmd_sem);
}
/*
* ps2_is_keyboard_id() checks received ID byte against the list of
* known keyboard IDs.
*/
static inline int ps2_is_keyboard_id(char id_byte)
{
static char keyboard_ids[] = {
0xab, /* Regular keyboards */
0xac, /* NCD Sun keyboard */
0x2b, /* Trust keyboard, translated */
0x5d, /* Trust keyboard */
0x60, /* NMB SGI keyboard, translated */
0x47, /* NMB SGI keyboard */
};
return memchr(keyboard_ids, id_byte, sizeof(keyboard_ids)) != NULL;
}
/*
* ps2_adjust_timeout() is called after receiving 1st byte of command
* response and tries to reduce remaining timeout to speed up command
* completion.
*/
static int ps2_adjust_timeout(struct ps2dev *ps2dev, int command, int timeout)
{
switch (command) {
case PS2_CMD_RESET_BAT:
/*
* Device has sent the first response byte after
* reset command, reset is thus done, so we can
* shorten the timeout.
* The next byte will come soon (keyboard) or not
* at all (mouse).
*/
if (timeout > msecs_to_jiffies(100))
timeout = msecs_to_jiffies(100);
break;
case PS2_CMD_GETID:
/*
* If device behind the port is not a keyboard there
* won't be 2nd byte of ID response.
*/
if (!ps2_is_keyboard_id(ps2dev->cmdbuf[1])) {
serio_pause_rx(ps2dev->serio);
ps2dev->flags = ps2dev->cmdcnt = 0;
serio_continue_rx(ps2dev->serio);
timeout = 0;
}
break;
default:
break;
}
return timeout;
}
/*
* ps2_command() sends a command and its parameters to the mouse,
* then waits for the response and puts it in the param array.
......@@ -86,6 +172,11 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command)
int rc = -1;
int i;
if (receive > sizeof(ps2dev->cmdbuf)) {
WARN_ON(1);
return -1;
}
down(&ps2dev->cmd_sem);
serio_pause_rx(ps2dev->serio);
......@@ -101,10 +192,9 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command)
* ACKing the reset command, and so it can take a long
* time before the ACK arrrives.
*/
if (command & 0xff)
if (ps2_sendbyte(ps2dev, command & 0xff,
command == PS2_CMD_RESET_BAT ? 1000 : 200))
goto out;
if (ps2_sendbyte(ps2dev, command & 0xff,
command == PS2_CMD_RESET_BAT ? 1000 : 200))
goto out;
for (i = 0; i < send; i++)
if (ps2_sendbyte(ps2dev, param[i], 200))
......@@ -120,33 +210,7 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command)
if (ps2dev->cmdcnt && timeout > 0) {
if (command == PS2_CMD_RESET_BAT && timeout > msecs_to_jiffies(100)) {
/*
* Device has sent the first response byte
* after a reset command, reset is thus done,
* shorten the timeout. The next byte will come
* soon (keyboard) or not at all (mouse).
*/
timeout = msecs_to_jiffies(100);
}
if (command == PS2_CMD_GETID &&
ps2dev->cmdbuf[receive - 1] != 0xab && /* Regular keyboards */
ps2dev->cmdbuf[receive - 1] != 0xac && /* NCD Sun keyboard */
ps2dev->cmdbuf[receive - 1] != 0x2b && /* Trust keyboard, translated */
ps2dev->cmdbuf[receive - 1] != 0x5d && /* Trust keyboard */
ps2dev->cmdbuf[receive - 1] != 0x60 && /* NMB SGI keyboard, translated */
ps2dev->cmdbuf[receive - 1] != 0x47) { /* NMB SGI keyboard */
/*
* Device behind the port is not a keyboard
* so we don't need to wait for the 2nd byte
* of ID response.
*/
serio_pause_rx(ps2dev->serio);
ps2dev->flags = ps2dev->cmdcnt = 0;
serio_continue_rx(ps2dev->serio);
}
timeout = ps2_adjust_timeout(ps2dev, command, timeout);
wait_event_timeout(ps2dev->wait,
!(ps2dev->flags & PS2_FLAG_CMD), timeout);
}
......@@ -160,7 +224,7 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command)
rc = 0;
out:
out:
serio_pause_rx(ps2dev->serio);
ps2dev->flags = 0;
serio_continue_rx(ps2dev->serio);
......
drivers/input/touchscreen/elo.c
View file @ 3e0777b8
......@@ -226,7 +226,7 @@ static int elo_connect(struct serio *serio, struct serio_driver *drv)
input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0);
input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 255, 0, 0);
break;
case 1: /* 6-byte protocol */
input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 15, 0, 0);
......
drivers/input/touchscreen/h3600_ts_input.c
View file @ 3e0777b8
This diff is collapsed.
drivers/input/touchscreen/mk712.c
View file @ 3e0777b8
......@@ -17,7 +17,7 @@
* found in Gateway AOL Connected Touchpad computers.
*
* Documentation for ICS MK712 can be found at:
* http://www.icst.com/pdf/mk712.pdf
* http://www.icst.com/pdf/mk712.pdf
*/
/*
......@@ -77,7 +77,6 @@ MODULE_PARM_DESC(irq, "IRQ of MK712 touchscreen controller");
#define MK712_READ_ONE_POINT 0x20
#define MK712_POWERUP 0x40
static int mk712_used = 0;
static struct input_dev mk712_dev;
static DEFINE_SPINLOCK(mk712_lock);
......@@ -130,17 +129,14 @@ static int mk712_open(struct input_dev *dev)
spin_lock_irqsave(&mk712_lock, flags);
if (!mk712_used++) {
outb(0, mk712_io + MK712_CONTROL); /* Reset */
outb(0, mk712_io + MK712_CONTROL); /* Reset */
outb(MK712_ENABLE_INT | MK712_INT_ON_CONVERSION_COMPLETE |
MK712_INT_ON_CHANGE_IN_TOUCH_STATUS |
MK712_ENABLE_PERIODIC_CONVERSIONS |
MK712_POWERUP, mk712_io + MK712_CONTROL);
outb(MK712_ENABLE_INT | MK712_INT_ON_CONVERSION_COMPLETE |
MK712_INT_ON_CHANGE_IN_TOUCH_STATUS |
MK712_ENABLE_PERIODIC_CONVERSIONS |
MK712_POWERUP, mk712_io + MK712_CONTROL);
outb(10, mk712_io + MK712_RATE); /* 187 points per second */
}
outb(10, mk712_io + MK712_RATE); /* 187 points per second */
spin_unlock_irqrestore(&mk712_lock, flags);
......@@ -153,8 +149,7 @@ static void mk712_close(struct input_dev *dev)
spin_lock_irqsave(&mk712_lock, flags);
if (!--mk712_used)
outb(0, mk712_io + MK712_CONTROL);
outb(0, mk712_io + MK712_CONTROL);
spin_unlock_irqrestore(&mk712_lock, flags);
}
......
drivers/usb/Makefile
View file @ 3e0777b8
......@@ -31,6 +31,7 @@ obj-$(CONFIG_USB_MOUSE) += input/
obj-$(CONFIG_USB_MTOUCH) += input/
obj-$(CONFIG_USB_POWERMATE) += input/
obj-$(CONFIG_USB_WACOM) += input/
obj-$(CONFIG_USB_ACECAD) += input/
obj-$(CONFIG_USB_XPAD) += input/
obj-$(CONFIG_USB_DABUSB) += media/
......
drivers/usb/input/Kconfig
View file @ 3e0777b8
......@@ -151,6 +151,18 @@ config USB_WACOM
To compile this driver as a module, choose M here: the
module will be called wacom.
config USB_ACECAD
tristate "Acecad Flair tablet support"
depends on USB && INPUT
help
Say Y here if you want to use the USB version of the Acecad Flair
tablet. Make sure to say Y to "Mouse support"
(CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
(CONFIG_INPUT_EVDEV) as well.
To compile this driver as a module, choose M here: the
module will be called acecad.
config USB_KBTAB
tristate "KB Gear JamStudio tablet support"
depends on USB && INPUT
......@@ -190,6 +202,18 @@ config USB_MTOUCH
To compile this driver as a module, choose M here: the
module will be called mtouchusb.
config USB_ITMTOUCH
tristate "ITM Touch USB Touchscreen Driver"
depends on USB && INPUT
---help---
Say Y here if you want to use a ITM Touch USB
Touchscreen controller.
This touchscreen is used in LG 1510SF monitors.
To compile this driver as a module, choose M here: the
module will be called itmtouch.
config USB_EGALAX
tristate "eGalax TouchKit USB Touchscreen Driver"
depends on USB && INPUT
......
drivers/usb/input/Makefile
View file @ 3e0777b8
......@@ -33,7 +33,9 @@ obj-$(CONFIG_USB_KBD) += usbkbd.o
obj-$(CONFIG_USB_KBTAB) += kbtab.o
obj-$(CONFIG_USB_MOUSE) += usbmouse.o
obj-$(CONFIG_USB_MTOUCH) += mtouchusb.o
obj-$(CONFIG_USB_ITMTOUCH) += itmtouch.o
obj-$(CONFIG_USB_EGALAX) += touchkitusb.o
obj-$(CONFIG_USB_POWERMATE) += powermate.o
obj-$(CONFIG_USB_WACOM) += wacom.o
obj-$(CONFIG_USB_ACECAD) += acecad.o
obj-$(CONFIG_USB_XPAD) += xpad.o
drivers/usb/input/acecad.c 0 → 100644
View file @ 3e0777b8
/*
* Copyright (c) 2001-2005 Edouard TISSERANT <edouard.tisserant@wanadoo.fr>
* Copyright (c) 2004-2005 Stephane VOLTZ <svoltz@numericable.fr>
*
* USB Acecad "Acecad Flair" tablet support
*
* Changelog:
* v3.2 - Added sysfs support
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
/*
* Version Information
*/
#define DRIVER_VERSION "v3.2"
#define DRIVER_DESC "USB Acecad Flair tablet driver"
#define DRIVER_LICENSE "GPL"
#define DRIVER_AUTHOR "Edouard TISSERANT <edouard.tisserant@wanadoo.fr>"
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENSE);
#define USB_VENDOR_ID_ACECAD 0x0460
#define USB_DEVICE_ID_FLAIR 0x0004
#define USB_DEVICE_ID_302 0x0008
struct usb_acecad {
char name[128];
char phys[64];
struct usb_device *usbdev;
struct input_dev dev;
struct urb *irq;
signed char *data;
dma_addr_t data_dma;
};
static void usb_acecad_irq(struct urb *urb, struct pt_regs *regs)
{
struct usb_acecad *acecad = urb->context;
unsigned char *data = acecad->data;
struct input_dev *dev = &acecad->dev;
int prox, status;
switch (urb->status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
return;
default:
dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
goto resubmit;
}
prox = (data[0] & 0x04) >> 2;
input_report_key(dev, BTN_TOOL_PEN, prox);
if (prox) {
int x = data[1] | (data[2] << 8);
int y = data[3] | (data[4] << 8);
/*Pressure should compute the same way for flair and 302*/
int pressure = data[5] | ((int)data[6] << 8);
int touch = data[0] & 0x01;
int stylus = (data[0] & 0x10) >> 4;
int stylus2 = (data[0] & 0x20) >> 5;
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
input_report_abs(dev, ABS_PRESSURE, pressure);
input_report_key(dev, BTN_TOUCH, touch);
input_report_key(dev, BTN_STYLUS, stylus);
input_report_key(dev, BTN_STYLUS2, stylus2);
}
/* event termination */
input_sync(dev);
resubmit:
status = usb_submit_urb (urb, GFP_ATOMIC);
if (status)
err ("can't resubmit intr, %s-%s/input0, status %d",
acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status);
}
static int usb_acecad_open(struct input_dev *dev)
{
struct usb_acecad *acecad = dev->private;
acecad->irq->dev = acecad->usbdev;
if (usb_submit_urb(acecad->irq, GFP_KERNEL))
return -EIO;
return 0;
}
static void usb_acecad_close(struct input_dev *dev)
{
struct usb_acecad *acecad = dev->private;
usb_kill_urb(acecad->irq);
}
static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
struct usb_acecad *acecad;
int pipe, maxp;
char path[64];
if (interface->desc.bNumEndpoints != 1)
return -ENODEV;
endpoint = &interface->endpoint[0].desc;
if (!(endpoint->bEndpointAddress & 0x80))
return -ENODEV;
if ((endpoint->bmAttributes & 3) != 3)
return -ENODEV;
pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
acecad = kcalloc(1, sizeof(struct usb_acecad), GFP_KERNEL);
if (!acecad)
return -ENOMEM;
acecad->data = usb_buffer_alloc(dev, 8, SLAB_KERNEL, &acecad->data_dma);
if (!acecad->data)
goto fail1;
acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
if (!acecad->irq)
goto fail2;
if (dev->manufacturer)
strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
if (dev->product) {
if (dev->manufacturer)
strlcat(acecad->name, " ", sizeof(acecad->name));
strlcat(acecad->name, dev->product, sizeof(acecad->name));
}
usb_make_path(dev, path, sizeof(path));
snprintf(acecad->phys, sizeof(acecad->phys), "%s/input0", path);
acecad->usbdev = dev;
acecad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
acecad->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
acecad->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
acecad->dev.keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2);
switch (id->driver_info) {
case 0:
acecad->dev.absmax[ABS_X] = 5000;
acecad->dev.absmax[ABS_Y] = 3750;
acecad->dev.absmax[ABS_PRESSURE] = 512;
if (!strlen(acecad->name))
snprintf(acecad->name, sizeof(acecad->name),
"USB Acecad Flair Tablet %04x:%04x",
dev->descriptor.idVendor, dev->descriptor.idProduct);
break;
case 1:
acecad->dev.absmax[ABS_X] = 3000;
acecad->dev.absmax[ABS_Y] = 2250;
acecad->dev.absmax[ABS_PRESSURE] = 1024;
if (!strlen(acecad->name))
snprintf(acecad->name, sizeof(acecad->name),
"USB Acecad 302 Tablet %04x:%04x",
dev->descriptor.idVendor, dev->descriptor.idProduct);
break;
}
acecad->dev.absfuzz[ABS_X] = 4;
acecad->dev.absfuzz[ABS_Y] = 4;
acecad->dev.private = acecad;
acecad->dev.open = usb_acecad_open;
acecad->dev.close = usb_acecad_close;
acecad->dev.name = acecad->name;
acecad->dev.phys = acecad->phys;
acecad->dev.id.bustype = BUS_USB;
acecad->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
acecad->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
acecad->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
acecad->dev.dev = &intf->dev;
usb_fill_int_urb(acecad->irq, dev, pipe,
acecad->data, maxp > 8 ? 8 : maxp,
usb_acecad_irq, acecad, endpoint->bInterval);
acecad->irq->transfer_dma = acecad->data_dma;
acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
input_register_device(&acecad->dev);
printk(KERN_INFO "input: %s with packet size %d on %s\n",
acecad->name, maxp, path);
usb_set_intfdata(intf, acecad);
return 0;
fail2: usb_buffer_free(dev, 8, acecad->data, acecad->data_dma);
fail1: kfree(acecad);
return -ENOMEM;
}
static void usb_acecad_disconnect(struct usb_interface *intf)
{
struct usb_acecad *acecad = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
if (acecad) {
usb_kill_urb(acecad->irq);
input_unregister_device(&acecad->dev);
usb_free_urb(acecad->irq);
usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma);
kfree(acecad);
}
}
static struct usb_device_id usb_acecad_id_table [] = {
{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 },
{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302), .driver_info = 1 },
{ }
};
MODULE_DEVICE_TABLE(usb, usb_acecad_id_table);
static struct usb_driver usb_acecad_driver = {
.owner = THIS_MODULE,
.name = "usb_acecad",
.probe = usb_acecad_probe,
.disconnect = usb_acecad_disconnect,
.id_table = usb_acecad_id_table,
};
static int __init usb_acecad_init(void)
{
int result = usb_register(&usb_acecad_driver);
if (result == 0)
info(DRIVER_VERSION ":" DRIVER_DESC);
return result;
}
static void __exit usb_acecad_exit(void)
{
usb_deregister(&usb_acecad_driver);
}
module_init(usb_acecad_init);
module_exit(usb_acecad_exit);
drivers/usb/input/aiptek.c
View file @ 3e0777b8
/*
* Native support for the Aiptek HyperPen USB Tablets
* (4000U/5000U/6000U/8000U/12000U)
*
*
* Copyright (c) 2001 Chris Atenasio <chris@crud.net>
* Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net>
*
......@@ -31,7 +31,7 @@
* - Added support for the sysfs interface, deprecating the
* procfs interface for 2.5.x kernel. Also added support for
* Wheel command. Bryan W. Headley July-15-2003.
* v1.2 - Reworked jitter timer as a kernel thread.
* v1.2 - Reworked jitter timer as a kernel thread.
* Bryan W. Headley November-28-2003/Jan-10-2004.
* v1.3 - Repaired issue of kernel thread going nuts on single-processor
* machines, introduced programmableDelay as a command line
......@@ -49,10 +49,10 @@
* NOTE:
* This kernel driver is augmented by the "Aiptek" XFree86 input
* driver for your X server, as well as the Gaiptek GUI Front-end
* "Tablet Manager".
* These three products are highly interactive with one another,
* "Tablet Manager".
* These three products are highly interactive with one another,
* so therefore it's easier to document them all as one subsystem.
* Please visit the project's "home page", located at,
* Please visit the project's "home page", located at,
* http://aiptektablet.sourceforge.net.
*
* This program is free software; you can redistribute it and/or modify
......@@ -156,7 +156,7 @@
* Command/Data Description Return Bytes Return Value
* 0x10/0x00 SwitchToMouse 0
* 0x10/0x01 SwitchToTablet 0
* 0x18/0x04 SetResolution 0
* 0x18/0x04 SetResolution 0
* 0x12/0xFF AutoGainOn 0
* 0x17/0x00 FilterOn 0
* 0x01/0x00 GetXExtension 2 MaxX
......@@ -247,7 +247,7 @@
#define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE 2
#define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED 3
/* Time to wait (in ms) to help mask hand jittering
/* Time to wait (in ms) to help mask hand jittering
* when pressing the stylus buttons.
*/
#define AIPTEK_JITTER_DELAY_DEFAULT 50
......@@ -324,7 +324,6 @@ struct aiptek {
struct aiptek_settings curSetting; /* tablet's current programmable */
struct aiptek_settings newSetting; /* ... and new param settings */
unsigned int ifnum; /* interface number for IO */
int openCount; /* module use counter */
int diagnostic; /* tablet diagnostic codes */
unsigned long eventCount; /* event count */
int inDelay; /* jitter: in jitter delay? */
......@@ -791,7 +790,7 @@ static void aiptek_irq(struct urb *urb, struct pt_regs *regs)
* specific Aiptek model numbers, because there has been overlaps,
* use, and reuse of id's in existing models. Certain models have
* been known to use more than one ID, indicative perhaps of
* manufacturing revisions. In any event, we consider these
* manufacturing revisions. In any event, we consider these
* IDs to not be model-specific nor unique.
*/
static const struct usb_device_id aiptek_ids[] = {
......@@ -814,15 +813,9 @@ static int aiptek_open(struct input_dev *inputdev)
{
struct aiptek *aiptek = inputdev->private;
if (aiptek->openCount++ > 0) {
return 0;
}
aiptek->urb->dev = aiptek->usbdev;
if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0) {
aiptek->openCount--;
if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0)
return -EIO;
}
return 0;
}
......@@ -834,13 +827,11 @@ static void aiptek_close(struct input_dev *inputdev)
{
struct aiptek *aiptek = inputdev->private;
if (--aiptek->openCount == 0) {
usb_kill_urb(aiptek->urb);
}
usb_kill_urb(aiptek->urb);
}
/***********************************************************************
* aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x,
* aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x,
* where they were known as usb_set_report and usb_get_report.
*/
static int
......@@ -2252,7 +2243,6 @@ static void aiptek_disconnect(struct usb_interface *intf)
AIPTEK_PACKET_LENGTH,
aiptek->data, aiptek->data_dma);
kfree(aiptek);
aiptek = NULL;
}
}
......
drivers/usb/input/ati_remote.c
View file @ 3e0777b8
This diff is collapsed.
drivers/usb/input/hid-core.c
View file @ 3e0777b8
......@@ -232,7 +232,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
report->size += parser->global.report_size * parser->global.report_count;
if (!parser->local.usage_index) /* Ignore padding fields */
return 0;
return 0;
usages = max_t(int, parser->local.usage_index, parser->global.report_count);
......@@ -765,7 +765,7 @@ static __inline__ __u32 s32ton(__s32 value, unsigned n)
static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n)
{
report += (offset >> 5) << 2; offset &= 31;
return (le64_to_cpu(get_unaligned((__le64*)report)) >> offset) & ((1 << n) - 1);
return (le64_to_cpu(get_unaligned((__le64*)report)) >> offset) & ((1ULL << n) - 1);
}
static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value)
......@@ -1233,6 +1233,13 @@ int hid_wait_io(struct hid_device *hid)
return 0;
}
static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle)
{
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, (idle << 8) | report,
ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
static int hid_get_class_descriptor(struct usb_device *dev, int ifnum,
unsigned char type, void *buf, int size)
{
......@@ -1301,10 +1308,6 @@ void hid_init_reports(struct hid_device *hid)
if (err)
warn("timeout initializing reports\n");
usb_control_msg(hid->dev, usb_sndctrlpipe(hid->dev, 0),
HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
hid->ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
#define USB_VENDOR_ID_WACOM 0x056a
......@@ -1318,6 +1321,10 @@ void hid_init_reports(struct hid_device *hid)
#define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0
#define USB_DEVICE_ID_WACOM_CINTIQ 0x003F
#define USB_VENDOR_ID_ACECAD 0x0460
#define USB_DEVICE_ID_ACECAD_FLAIR 0x0004
#define USB_DEVICE_ID_ACECAD_302 0x0008
#define USB_VENDOR_ID_KBGEAR 0x084e
#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001
......@@ -1502,6 +1509,9 @@ static struct hid_blacklist {
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
......@@ -1590,6 +1600,8 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
return NULL;
}
hid_set_idle(dev, interface->desc.bInterfaceNumber, 0, 0);
if ((n = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, HID_DT_REPORT, rdesc, rsize)) < 0) {
dbg("reading report descriptor failed");
kfree(rdesc);
......@@ -1635,7 +1647,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
/* Change the polling interval of mice. */
if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0)
interval = hid_mousepoll_interval;
if (endpoint->bEndpointAddress & USB_DIR_IN) {
if (hid->urbin)
continue;
......
drivers/usb/input/hid-debug.h
View file @ 3e0777b8
......@@ -67,7 +67,7 @@ static const struct hid_usage_entry hid_usage_table[] = {
{0, 0x44, "Vbry"},
{0, 0x45, "Vbrz"},
{0, 0x46, "Vno"},
{0, 0x80, "SystemControl"},
{0, 0x80, "SystemControl"},
{0, 0x81, "SystemPowerDown"},
{0, 0x82, "SystemSleep"},
{0, 0x83, "SystemWakeUp"},
......@@ -347,7 +347,7 @@ __inline__ static void tab(int n) {
static void hid_dump_field(struct hid_field *field, int n) {
int j;
if (field->physical) {
tab(n);
printk("Physical(");
......@@ -408,7 +408,7 @@ static void hid_dump_field(struct hid_field *field, int n) {
printk("%s", units[sys][i]);
if(nibble != 1) {
/* This is a _signed_ nibble(!) */
int val = nibble & 0x7;
if(nibble & 0x08)
val = -((0x7 & ~val) +1);
......@@ -443,7 +443,7 @@ static void __attribute__((unused)) hid_dump_device(struct hid_device *device) {
struct list_head *list;
unsigned i,k;
static char *table[] = {"INPUT", "OUTPUT", "FEATURE"};
for (i = 0; i < HID_REPORT_TYPES; i++) {
report_enum = device->report_enum + i;
list = report_enum->report_list.next;
......@@ -664,8 +664,8 @@ static char *keys[KEY_MAX + 1] = {
static char *relatives[REL_MAX + 1] = {
[REL_X] = "X", [REL_Y] = "Y",
[REL_Z] = "Z", [REL_HWHEEL] = "HWheel",
[REL_DIAL] = "Dial", [REL_WHEEL] = "Wheel",
[REL_MISC] = "Misc",
[REL_DIAL] = "Dial", [REL_WHEEL] = "Wheel",
[REL_MISC] = "Misc",
};
static char *absolutes[ABS_MAX + 1] = {
......@@ -690,9 +690,9 @@ static char *misc[MSC_MAX + 1] = {
};
static char *leds[LED_MAX + 1] = {
[LED_NUML] = "NumLock", [LED_CAPSL] = "CapsLock",
[LED_NUML] = "NumLock", [LED_CAPSL] = "CapsLock",
[LED_SCROLLL] = "ScrollLock", [LED_COMPOSE] = "Compose",
[LED_KANA] = "Kana", [LED_SLEEP] = "Sleep",
[LED_KANA] = "Kana", [LED_SLEEP] = "Sleep",
[LED_SUSPEND] = "Suspend", [LED_MUTE] = "Mute",
[LED_MISC] = "Misc",
};
......
drivers/usb/input/hid-input.c
View file @ 3e0777b8
......@@ -164,7 +164,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case HID_GD_X: case HID_GD_Y: case HID_GD_Z:
case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ:
case HID_GD_SLIDER: case HID_GD_DIAL: case HID_GD_WHEEL:
if (field->flags & HID_MAIN_ITEM_RELATIVE)
if (field->flags & HID_MAIN_ITEM_RELATIVE)
map_rel(usage->hid & 0xf);
else
map_abs(usage->hid & 0xf);
......@@ -297,7 +297,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case HID_UP_MSVENDOR:
goto ignore;
case HID_UP_PID:
set_bit(EV_FF, input->evbit);
......@@ -349,7 +349,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
goto ignore;
if ((device->quirks & (HID_QUIRK_2WHEEL_MOUSE_HACK_7 | HID_QUIRK_2WHEEL_MOUSE_HACK_5)) &&
(usage->type == EV_REL) && (usage->code == REL_WHEEL))
(usage->type == EV_REL) && (usage->code == REL_WHEEL))
set_bit(REL_HWHEEL, bit);
if (((device->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK_5) && (usage->hid == 0x00090005))
......@@ -365,11 +365,11 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
a = field->logical_minimum = 0;
b = field->logical_maximum = 255;
}
if (field->application == HID_GD_GAMEPAD || field->application == HID_GD_JOYSTICK)
input_set_abs_params(input, usage->code, a, b, (b - a) >> 8, (b - a) >> 4);
else input_set_abs_params(input, usage->code, a, b, 0, 0);
}
if (usage->hat_min < usage->hat_max || usage->hat_dir) {
......@@ -420,7 +420,7 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
return;
}
if (usage->hat_min < usage->hat_max || usage->hat_dir) {
if (usage->hat_min < usage->hat_max || usage->hat_dir) {
int hat_dir = usage->hat_dir;
if (!hat_dir)
hat_dir = (value - usage->hat_min) * 8 / (usage->hat_max - usage->hat_min + 1) + 1;
......@@ -551,7 +551,7 @@ int hidinput_connect(struct hid_device *hid)
for (i = 0; i < hid->maxcollection; i++)
if (hid->collection[i].type == HID_COLLECTION_APPLICATION ||
hid->collection[i].type == HID_COLLECTION_PHYSICAL)
if (IS_INPUT_APPLICATION(hid->collection[i].usage))
if (IS_INPUT_APPLICATION(hid->collection[i].usage))
break;
if (i == hid->maxcollection)
......@@ -592,7 +592,7 @@ int hidinput_connect(struct hid_device *hid)
for (j = 0; j < report->field[i]->maxusage; j++)
hidinput_configure_usage(hidinput, report->field[i],
report->field[i]->usage + j);
if (hid->quirks & HID_QUIRK_MULTI_INPUT) {
/* This will leave hidinput NULL, so that it
* allocates another one if we have more inputs on
......
drivers/usb/input/hid-lgff.c
View file @ 3e0777b8
......@@ -94,7 +94,7 @@ struct lgff_device {
isn't really necessary */
unsigned long flags[1]; /* Contains various information about the
state of the driver for this device */
state of the driver for this device */
struct timer_list timer;
};
......@@ -234,7 +234,7 @@ static struct hid_report* hid_lgff_duplicate_report(struct hid_report* report)
kfree(ret);
return NULL;
}
memset(ret->field[0]->value, 0, sizeof(s32[8]));
memset(ret->field[0]->value, 0, sizeof(s32[8]));
return ret;
}
......@@ -295,11 +295,11 @@ static int hid_lgff_event(struct hid_device *hid, struct input_dev* input,
unsigned long flags;
if (type != EV_FF) return -EINVAL;
if (!LGFF_CHECK_OWNERSHIP(code, lgff)) return -EACCES;
if (!LGFF_CHECK_OWNERSHIP(code, lgff)) return -EACCES;
if (value < 0) return -EINVAL;
spin_lock_irqsave(&lgff->lock, flags);
if (value > 0) {
if (test_bit(EFFECT_STARTED, effect->flags)) {
spin_unlock_irqrestore(&lgff->lock, flags);
......@@ -345,7 +345,7 @@ static int hid_lgff_flush(struct input_dev *dev, struct file *file)
and perform ioctls on the same fd all at the same time */
if ( current->pid == lgff->effects[i].owner
&& test_bit(EFFECT_USED, lgff->effects[i].flags)) {
if (hid_lgff_erase(dev, i))
warn("erase effect %d failed", i);
}
......@@ -378,7 +378,7 @@ static int hid_lgff_upload_effect(struct input_dev* input,
struct lgff_effect new;
int id;
unsigned long flags;
dbg("ioctl rumble");
if (!test_bit(effect->type, input->ffbit)) return -EINVAL;
......@@ -441,7 +441,7 @@ static void hid_lgff_timer(unsigned long timer_data)
spin_lock_irqsave(&lgff->lock, flags);
for (i=0; i<LGFF_EFFECTS; ++i) {
for (i=0; i<LGFF_EFFECTS; ++i) {
struct lgff_effect* effect = lgff->effects +i;
if (test_bit(EFFECT_PLAYING, effect->flags)) {
......@@ -491,7 +491,7 @@ static void hid_lgff_timer(unsigned long timer_data)
set_bit(EFFECT_PLAYING, lgff->effects[i].flags);
}
}
}
}
#define CLAMP(x) if (x < 0) x = 0; if (x > 0xff) x = 0xff
......@@ -524,5 +524,5 @@ static void hid_lgff_timer(unsigned long timer_data)
add_timer(&lgff->timer);
}
spin_unlock_irqrestore(&lgff->lock, flags);
spin_unlock_irqrestore(&lgff->lock, flags);
}
drivers/usb/input/hid.h
View file @ 3e0777b8
......@@ -118,7 +118,7 @@ struct hid_item {
#define HID_MAIN_ITEM_CONSTANT 0x001
#define HID_MAIN_ITEM_VARIABLE 0x002
#define HID_MAIN_ITEM_RELATIVE 0x004
#define HID_MAIN_ITEM_WRAP 0x008
#define HID_MAIN_ITEM_WRAP 0x008
#define HID_MAIN_ITEM_NONLINEAR 0x010
#define HID_MAIN_ITEM_NO_PREFERRED 0x020
#define HID_MAIN_ITEM_NULL_STATE 0x040
......@@ -172,14 +172,14 @@ struct hid_item {
#define HID_USAGE_PAGE 0xffff0000
#define HID_UP_UNDEFINED 0x00000000
#define HID_UP_GENDESK 0x00010000
#define HID_UP_KEYBOARD 0x00070000
#define HID_UP_LED 0x00080000
#define HID_UP_BUTTON 0x00090000
#define HID_UP_ORDINAL 0x000a0000
#define HID_UP_GENDESK 0x00010000
#define HID_UP_KEYBOARD 0x00070000
#define HID_UP_LED 0x00080000
#define HID_UP_BUTTON 0x00090000
#define HID_UP_ORDINAL 0x000a0000
#define HID_UP_CONSUMER 0x000c0000
#define HID_UP_DIGITIZER 0x000d0000
#define HID_UP_PID 0x000f0000
#define HID_UP_DIGITIZER 0x000d0000
#define HID_UP_PID 0x000f0000
#define HID_UP_HPVENDOR 0xff7f0000
#define HID_UP_MSVENDOR 0xff000000
......@@ -406,7 +406,7 @@ struct hid_device { /* device report descriptor */
dma_addr_t outbuf_dma; /* Output buffer dma */
spinlock_t outlock; /* Output fifo spinlock */
unsigned claimed; /* Claimed by hidinput, hiddev? */
unsigned claimed; /* Claimed by hidinput, hiddev? */
unsigned quirks; /* Various quirks the device can pull on us */
struct list_head inputs; /* The list of inputs */
......
drivers/usb/input/hiddev.c
View file @ 3e0777b8
This diff is collapsed.
drivers/usb/input/itmtouch.c 0 → 100644
View file @ 3e0777b8
This diff is collapsed.
drivers/usb/input/kbtab.c
View file @ 3e0777b8
This diff is collapsed.
drivers/usb/input/mtouchusb.c
View file @ 3e0777b8
This diff is collapsed.
drivers/usb/input/powermate.c
View file @ 3e0777b8
This diff is collapsed.
drivers/usb/input/touchkitusb.c
View file @ 3e0777b8
This diff is collapsed.
drivers/usb/input/usbkbd.c
View file @ 3e0777b8
This diff is collapsed.
drivers/usb/input/usbmouse.c
View file @ 3e0777b8
This diff is collapsed.
drivers/usb/input/wacom.c
View file @ 3e0777b8
This diff is collapsed.
drivers/usb/input/xpad.c
View file @ 3e0777b8
This diff is collapsed.
include/linux/input.h
View file @ 3e0777b8
......@@ -859,6 +859,10 @@ struct input_dev {
int (*erase_effect)(struct input_dev *dev, int effect_id);
struct input_handle *grab;
struct semaphore sem; /* serializes open and close operations */
unsigned int users;
struct device *dev;
struct list_head h_list;
......
include/linux/joystick.h
View file @ 3e0777b8
This diff is collapsed.
include/linux/libps2.h
View file @ 3e0777b8
......@@ -41,6 +41,7 @@ struct ps2dev {
void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout);
void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout);
int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
int ps2_schedule_command(struct ps2dev *ps2dev, unsigned char *param, int command);
int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data);
......
include/linux/serio.h
View file @ 3e0777b8
This diff is collapsed.
sound/oss/Kconfig
View file @ 3e0777b8
......@@ -52,7 +52,7 @@ config SOUND_CMPCI_MIDI
config SOUND_CMPCI_JOYSTICK
bool "Enable joystick"
depends on SOUND_CMPCI && X86
depends on SOUND_CMPCI && X86 && (GAMEPORT=y || SOUND_CMPCI=GAMEPORT)
help
Say Y here in order to enable the joystick port on a sound card using
the CMI8338 or the CMI8738 chipset. You need to config the
......
sound/oss/es1370.c
View file @ 3e0777b8
This diff is collapsed.
sound/oss/es1371.c
View file @ 3e0777b8
This diff is collapsed.
sound/oss/esssolo1.c
View file @ 3e0777b8
This diff is collapsed.
sound/oss/mad16.c
View file @ 3e0777b8
This diff is collapsed.
sound/oss/sonicvibes.c
View file @ 3e0777b8
This diff is collapsed.
sound/oss/trident.c
View file @ 3e0777b8
This diff is collapsed.
sound/pci/cs4281.c
View file @ 3e0777b8
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7