Commit 3e10a2ce authored by Heikki Krogerus's avatar Heikki Krogerus Committed by Felipe Balbi

usb: dwc3: add hsphy_interface property

Platforms that have configured DWC_USB3_HSPHY_INTERFACE with
value 3, i.e. UTMI+ and ULPI, need to inform the driver of
the actual HSPHY interface type with the property. "utmi" if
the interface is UTMI+ or "ulpi" if the interface is ULPI.
Signed-off-by: default avatarHeikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: default avatarDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 45bb7de2
......@@ -38,6 +38,8 @@ Optional properties:
- snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
utmi_l1_suspend_n, false when asserts utmi_sleep_n
- snps,hird-threshold: HIRD threshold
- snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for
UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3.
This is usually a subnode to DWC3 glue to which it is connected.
......
......@@ -438,6 +438,22 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
/* Select the HS PHY interface */
switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI:
if (!strncmp(dwc->hsphy_interface, "utmi", 4)) {
reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI;
} else if (!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
} else {
dev_warn(dwc->dev, "HSPHY Interface not defined\n");
break;
}
/* FALLTHROUGH */
default:
break;
}
/*
* Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
* '0' during coreConsultant configuration. So default value will
......@@ -844,6 +860,8 @@ static int dwc3_probe(struct platform_device *pdev)
"snps,tx_de_emphasis_quirk");
of_property_read_u8(node, "snps,tx_de_emphasis",
&tx_de_emphasis);
of_property_read_string(node, "snps,hsphy_interface",
&dwc->hsphy_interface);
} else if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
dwc->has_lpm_erratum = pdata->has_lpm_erratum;
......@@ -871,6 +889,8 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
if (pdata->tx_de_emphasis)
tx_de_emphasis = pdata->tx_de_emphasis;
dwc->hsphy_interface = pdata->hsphy_interface;
}
/* default to superspeed if no maximum_speed passed */
......
......@@ -682,6 +682,7 @@ struct dwc3_scratchpad_array {
* @test_mode_nr: test feature selector
* @lpm_nyet_threshold: LPM NYET response threshold
* @hird_threshold: HIRD threshold
* @hsphy_interface: "utmi" or "ulpi"
* @delayed_status: true when gadget driver asks for delayed status
* @ep0_bounced: true when we used bounce buffer
* @ep0_expect_in: true when we expect a DATA IN transfer
......@@ -809,6 +810,8 @@ struct dwc3 {
u8 lpm_nyet_threshold;
u8 hird_threshold;
const char *hsphy_interface;
unsigned delayed_status:1;
unsigned ep0_bounced:1;
unsigned ep0_expect_in:1;
......
......@@ -45,4 +45,6 @@ struct dwc3_platform_data {
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
const char *hsphy_interface;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment