iwlagn: refactor up path

Starting the device consists of many things,
refactor out enabling the hardware and also
return -ERFKILL when the rfkill signal is
found to be asserted (which makes more sense
anyway, but is also required now to make the
__iwl_up function return right away.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

drivers/net/wireless/iwlwifi/iwl-agn-lib.c

@@ -2294,6 +2294,52 @@ void iwlagn_remove_notification(struct iwl_priv *priv,
 	spin_unlock_bh(&priv->_agn.notif_wait_lock);
 }
 
+int iwlagn_start_device(struct iwl_priv *priv)
+{
+	int ret;
+
+	iwl_prepare_card_hw(priv);
+	if (!priv->hw_ready) {
+		IWL_WARN(priv, "Exit HW not ready\n");
+		return -EIO;
+	}
+
+	/* If platform's RF_KILL switch is NOT set to KILL */
+	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+		clear_bit(STATUS_RF_KILL_HW, &priv->status);
+	else
+		set_bit(STATUS_RF_KILL_HW, &priv->status);
+
+	if (iwl_is_rfkill(priv)) {
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
+		iwl_enable_interrupts(priv);
+		return -ERFKILL;
+	}
+
+	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
+
+	ret = iwlagn_hw_nic_init(priv);
+	if (ret) {
+		IWL_ERR(priv, "Unable to init nic\n");
+		return ret;
+	}
+
+	/* make sure rfkill handshake bits are cleared */
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
+		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+	/* clear (again), then enable host interrupts */
+	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
+	iwl_enable_interrupts(priv);
+
+	/* really make sure rfkill handshake bits are cleared */
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+	return 0;
+}
+
 void iwlagn_stop_device(struct iwl_priv *priv)
 {
 	unsigned long flags;

drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -2416,7 +2416,7 @@ static int iwl_set_hw_ready(struct iwl_priv *priv)
 	return ret;
 }
 
-static int iwl_prepare_card_hw(struct iwl_priv *priv)
+int iwl_prepare_card_hw(struct iwl_priv *priv)
 {
 	int ret = 0;
 
@@ -2462,47 +2462,9 @@ static int __iwl_up(struct iwl_priv *priv)
 		}
 	}
 
-	iwl_prepare_card_hw(priv);
-
-	if (!priv->hw_ready) {
-		IWL_WARN(priv, "Exit HW not ready\n");
-		return -EIO;
-	}
-
-	/* If platform's RF_KILL switch is NOT set to KILL */
-	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
-		clear_bit(STATUS_RF_KILL_HW, &priv->status);
-	else
-		set_bit(STATUS_RF_KILL_HW, &priv->status);
-
-	if (iwl_is_rfkill(priv)) {
-		wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
-
-		iwl_enable_interrupts(priv);
-		IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
-		return 0;
-	}
-
-	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-
-	ret = iwlagn_hw_nic_init(priv);
-	if (ret) {
-		IWL_ERR(priv, "Unable to init nic\n");
+	ret = iwlagn_start_device(priv);
+	if (ret)
 		return ret;
-	}
-
-	/* make sure rfkill handshake bits are cleared */
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
-		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
-	/* clear (again), then enable host interrupts */
-	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-	iwl_enable_interrupts(priv);
-
-	/* really make sure rfkill handshake bits are cleared */
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
 
 	for (i = 0; i < MAX_HW_RESTARTS; i++) {
 

drivers/net/wireless/iwlwifi/iwl-agn.h

@@ -128,7 +128,9 @@ static inline void iwl_synchronize_irq(struct iwl_priv *priv)
 	tasklet_kill(&priv->irq_tasklet);
 }
 
+int iwl_prepare_card_hw(struct iwl_priv *priv);
 
+int iwlagn_start_device(struct iwl_priv *priv);
 void iwlagn_stop_device(struct iwl_priv *priv);
 
 /* tx queue */