ice: make ice_vsi_cfg_rxq() static

Currently, XSK control path in ice driver calls directly
ice_vsi_cfg_rxq() whereas we have ice_vsi_cfg_single_rxq() for that
purpose. Use the latter from XSK side and make ice_vsi_cfg_rxq() static.

ice_vsi_cfg_rxq() resides in ice_base.c and is rather big, so to reduce
the code churn let us move two callers of it from ice_lib.c to
ice_base.c.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

drivers/net/ethernet/intel/ice/ice_base.c

@@ -538,7 +538,7 @@ static void ice_xsk_pool_fill_cb(struct ice_rx_ring *ring)
  *
  * Return 0 on success and a negative value on error.
  */
-int ice_vsi_cfg_rxq(struct ice_rx_ring *ring)
+static int ice_vsi_cfg_rxq(struct ice_rx_ring *ring)
 {
 	struct device *dev = ice_pf_to_dev(ring->vsi->back);
 	u32 num_bufs = ICE_RX_DESC_UNUSED(ring);
@@ -633,6 +633,62 @@ int ice_vsi_cfg_rxq(struct ice_rx_ring *ring)
 	return 0;
 }
 
+int ice_vsi_cfg_single_rxq(struct ice_vsi *vsi, u16 q_idx)
+{
+	if (q_idx >= vsi->num_rxq)
+		return -EINVAL;
+
+	return ice_vsi_cfg_rxq(vsi->rx_rings[q_idx]);
+}
+
+/**
+ * ice_vsi_cfg_frame_size - setup max frame size and Rx buffer length
+ * @vsi: VSI
+ */
+static void ice_vsi_cfg_frame_size(struct ice_vsi *vsi)
+{
+	if (!vsi->netdev || test_bit(ICE_FLAG_LEGACY_RX, vsi->back->flags)) {
+		vsi->max_frame = ICE_MAX_FRAME_LEGACY_RX;
+		vsi->rx_buf_len = ICE_RXBUF_1664;
+#if (PAGE_SIZE < 8192)
+	} else if (!ICE_2K_TOO_SMALL_WITH_PADDING &&
+		   (vsi->netdev->mtu <= ETH_DATA_LEN)) {
+		vsi->max_frame = ICE_RXBUF_1536 - NET_IP_ALIGN;
+		vsi->rx_buf_len = ICE_RXBUF_1536 - NET_IP_ALIGN;
+#endif
+	} else {
+		vsi->max_frame = ICE_AQ_SET_MAC_FRAME_SIZE_MAX;
+		vsi->rx_buf_len = ICE_RXBUF_3072;
+	}
+}
+
+/**
+ * ice_vsi_cfg_rxqs - Configure the VSI for Rx
+ * @vsi: the VSI being configured
+ *
+ * Return 0 on success and a negative value on error
+ * Configure the Rx VSI for operation.
+ */
+int ice_vsi_cfg_rxqs(struct ice_vsi *vsi)
+{
+	u16 i;
+
+	if (vsi->type == ICE_VSI_VF)
+		goto setup_rings;
+
+	ice_vsi_cfg_frame_size(vsi);
+setup_rings:
+	/* set up individual rings */
+	ice_for_each_rxq(vsi, i) {
+		int err = ice_vsi_cfg_rxq(vsi->rx_rings[i]);
+
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
 /**
  * __ice_vsi_get_qs - helper function for assigning queues from PF to VSI
  * @qs_cfg: gathered variables needed for pf->vsi queues assignment

drivers/net/ethernet/intel/ice/ice_base.h

@@ -6,7 +6,8 @@
 
 #include "ice.h"
 
-int ice_vsi_cfg_rxq(struct ice_rx_ring *ring);
+int ice_vsi_cfg_single_rxq(struct ice_vsi *vsi, u16 q_idx);
+int ice_vsi_cfg_rxqs(struct ice_vsi *vsi);
 int __ice_vsi_get_qs(struct ice_qs_cfg *qs_cfg);
 int
 ice_vsi_ctrl_one_rx_ring(struct ice_vsi *vsi, bool ena, u16 rxq_idx, bool wait);

drivers/net/ethernet/intel/ice/ice_lib.c

@@ -1671,27 +1671,6 @@ static void ice_vsi_set_rss_flow_fld(struct ice_vsi *vsi)
 	}
 }
 
-/**
- * ice_vsi_cfg_frame_size - setup max frame size and Rx buffer length
- * @vsi: VSI
- */
-static void ice_vsi_cfg_frame_size(struct ice_vsi *vsi)
-{
-	if (!vsi->netdev || test_bit(ICE_FLAG_LEGACY_RX, vsi->back->flags)) {
-		vsi->max_frame = ICE_MAX_FRAME_LEGACY_RX;
-		vsi->rx_buf_len = ICE_RXBUF_1664;
-#if (PAGE_SIZE < 8192)
-	} else if (!ICE_2K_TOO_SMALL_WITH_PADDING &&
-		   (vsi->netdev->mtu <= ETH_DATA_LEN)) {
-		vsi->max_frame = ICE_RXBUF_1536 - NET_IP_ALIGN;
-		vsi->rx_buf_len = ICE_RXBUF_1536 - NET_IP_ALIGN;
-#endif
-	} else {
-		vsi->max_frame = ICE_AQ_SET_MAC_FRAME_SIZE_MAX;
-		vsi->rx_buf_len = ICE_RXBUF_3072;
-	}
-}
-
 /**
  * ice_pf_state_is_nominal - checks the PF for nominal state
  * @pf: pointer to PF to check
@@ -1795,14 +1774,6 @@ ice_write_qrxflxp_cntxt(struct ice_hw *hw, u16 pf_q, u32 rxdid, u32 prio,
 	wr32(hw, QRXFLXP_CNTXT(pf_q), regval);
 }
 
-int ice_vsi_cfg_single_rxq(struct ice_vsi *vsi, u16 q_idx)
-{
-	if (q_idx >= vsi->num_rxq)
-		return -EINVAL;
-
-	return ice_vsi_cfg_rxq(vsi->rx_rings[q_idx]);
-}
-
 int ice_vsi_cfg_single_txq(struct ice_vsi *vsi, struct ice_tx_ring **tx_rings, u16 q_idx)
 {
 	DEFINE_FLEX(struct ice_aqc_add_tx_qgrp, qg_buf, txqs, 1);
@@ -1815,33 +1786,6 @@ int ice_vsi_cfg_single_txq(struct ice_vsi *vsi, struct ice_tx_ring **tx_rings, u
 	return ice_vsi_cfg_txq(vsi, tx_rings[q_idx], qg_buf);
 }
 
-/**
- * ice_vsi_cfg_rxqs - Configure the VSI for Rx
- * @vsi: the VSI being configured
- *
- * Return 0 on success and a negative value on error
- * Configure the Rx VSI for operation.
- */
-int ice_vsi_cfg_rxqs(struct ice_vsi *vsi)
-{
-	u16 i;
-
-	if (vsi->type == ICE_VSI_VF)
-		goto setup_rings;
-
-	ice_vsi_cfg_frame_size(vsi);
-setup_rings:
-	/* set up individual rings */
-	ice_for_each_rxq(vsi, i) {
-		int err = ice_vsi_cfg_rxq(vsi->rx_rings[i]);
-
-		if (err)
-			return err;
-	}
-
-	return 0;
-}
-
 /**
  * ice_vsi_cfg_txqs - Configure the VSI for Tx
  * @vsi: the VSI being configured

drivers/net/ethernet/intel/ice/ice_lib.h

@@ -54,12 +54,8 @@ bool ice_pf_state_is_nominal(struct ice_pf *pf);
 
 void ice_update_eth_stats(struct ice_vsi *vsi);
 
-int ice_vsi_cfg_single_rxq(struct ice_vsi *vsi, u16 q_idx);
-
 int ice_vsi_cfg_single_txq(struct ice_vsi *vsi, struct ice_tx_ring **tx_rings, u16 q_idx);
 
-int ice_vsi_cfg_rxqs(struct ice_vsi *vsi);
-
 int ice_vsi_cfg_lan_txqs(struct ice_vsi *vsi);
 
 void ice_vsi_cfg_msix(struct ice_vsi *vsi);

drivers/net/ethernet/intel/ice/ice_xsk.c

@@ -249,7 +249,7 @@ static int ice_qp_ena(struct ice_vsi *vsi, u16 q_idx)
 		ice_tx_xsk_pool(vsi, q_idx);
 	}
 
-	err = ice_vsi_cfg_rxq(rx_ring);
+	err = ice_vsi_cfg_single_rxq(vsi, q_idx);
 	if (err)
 		return err;