Commit 3e6ac2ad authored by Paul Cercueil's avatar Paul Cercueil Committed by Miquel Raynal

mtd: rawnand: ingenic: Add support for the JZ4725B

The boot ROM of the JZ4725B SoC expects a specific OOB layout on the
NAND, so we use it unconditionally in the ingenic-nand driver.

Also add the jz4725b-bch driver to support the JZ4725B-specific BCH
hardware.
Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
Signed-off-by: default avatarMiquel Raynal <miquel.raynal@bootlin.com>
parent a0ac778e
......@@ -27,6 +27,16 @@ config MTD_NAND_JZ4740_ECC
This driver can also be built as a module. If so, the module
will be called jz4740-ecc.
config MTD_NAND_JZ4725B_BCH
tristate "Hardware BCH support for JZ4725B SoC"
select MTD_NAND_INGENIC_ECC
help
Enable this driver to support the BCH error-correction hardware
present on the JZ4725B SoC from Ingenic.
This driver can also be built as a module. If so, the module
will be called jz4725b-bch.
config MTD_NAND_JZ4780_BCH
tristate "Hardware BCH support for JZ4780 SoC"
select MTD_NAND_INGENIC_ECC
......
......@@ -3,4 +3,5 @@ obj-$(CONFIG_MTD_NAND_JZ4780) += ingenic_nand.o
obj-$(CONFIG_MTD_NAND_INGENIC_ECC) += ingenic_ecc.o
obj-$(CONFIG_MTD_NAND_JZ4740_ECC) += jz4740_ecc.o
obj-$(CONFIG_MTD_NAND_JZ4725B_BCH) += jz4725b_bch.o
obj-$(CONFIG_MTD_NAND_JZ4780_BCH) += jz4780_bch.o
......@@ -34,6 +34,7 @@ struct jz_soc_info {
unsigned long data_offset;
unsigned long addr_offset;
unsigned long cmd_offset;
const struct mtd_ooblayout_ops *oob_layout;
};
struct ingenic_nand_cs {
......@@ -71,6 +72,41 @@ static inline struct ingenic_nfc *to_ingenic_nfc(struct nand_controller *ctrl)
return container_of(ctrl, struct ingenic_nfc, controller);
}
static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (section || !ecc->total)
return -ERANGE;
oobregion->length = ecc->total;
oobregion->offset = 3;
return 0;
}
static int jz4725b_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (section)
return -ERANGE;
oobregion->length = mtd->oobsize - ecc->total - 3;
oobregion->offset = 3 + ecc->total;
return 0;
}
const struct mtd_ooblayout_ops jz4725b_ooblayout_ops = {
.ecc = jz4725b_ooblayout_ecc,
.free = jz4725b_ooblayout_free,
};
static void ingenic_nand_select_chip(struct nand_chip *chip, int chipnr)
{
struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
......@@ -211,7 +247,7 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
return -EINVAL;
}
mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
return 0;
}
......@@ -407,16 +443,26 @@ static const struct jz_soc_info jz4740_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00008000,
.addr_offset = 0x00010000,
.oob_layout = &nand_ooblayout_lp_ops,
};
static const struct jz_soc_info jz4725b_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00008000,
.addr_offset = 0x00010000,
.oob_layout = &jz4725b_ooblayout_ops,
};
static const struct jz_soc_info jz4780_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00400000,
.addr_offset = 0x00800000,
.oob_layout = &nand_ooblayout_lp_ops,
};
static const struct of_device_id ingenic_nand_dt_match[] = {
{ .compatible = "ingenic,jz4740-nand", .data = &jz4740_soc_info },
{ .compatible = "ingenic,jz4725b-nand", .data = &jz4725b_soc_info },
{ .compatible = "ingenic,jz4780-nand", .data = &jz4780_soc_info },
{},
};
......
// SPDX-License-Identifier: GPL-2.0
/*
* JZ4725B BCH controller driver
*
* Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
*
* Based on jz4780_bch.c
*/
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include "ingenic_ecc.h"
#define BCH_BHCR 0x0
#define BCH_BHCSR 0x4
#define BCH_BHCCR 0x8
#define BCH_BHCNT 0xc
#define BCH_BHDR 0x10
#define BCH_BHPAR0 0x14
#define BCH_BHERR0 0x28
#define BCH_BHINT 0x24
#define BCH_BHINTES 0x3c
#define BCH_BHINTEC 0x40
#define BCH_BHINTE 0x38
#define BCH_BHCR_ENCE BIT(3)
#define BCH_BHCR_BSEL BIT(2)
#define BCH_BHCR_INIT BIT(1)
#define BCH_BHCR_BCHE BIT(0)
#define BCH_BHCNT_DEC_COUNT_SHIFT 16
#define BCH_BHCNT_DEC_COUNT_MASK (0x3ff << BCH_BHCNT_DEC_COUNT_SHIFT)
#define BCH_BHCNT_ENC_COUNT_SHIFT 0
#define BCH_BHCNT_ENC_COUNT_MASK (0x3ff << BCH_BHCNT_ENC_COUNT_SHIFT)
#define BCH_BHERR_INDEX0_SHIFT 0
#define BCH_BHERR_INDEX0_MASK (0x1fff << BCH_BHERR_INDEX0_SHIFT)
#define BCH_BHERR_INDEX1_SHIFT 16
#define BCH_BHERR_INDEX1_MASK (0x1fff << BCH_BHERR_INDEX1_SHIFT)
#define BCH_BHINT_ERRC_SHIFT 28
#define BCH_BHINT_ERRC_MASK (0xf << BCH_BHINT_ERRC_SHIFT)
#define BCH_BHINT_TERRC_SHIFT 16
#define BCH_BHINT_TERRC_MASK (0x7f << BCH_BHINT_TERRC_SHIFT)
#define BCH_BHINT_ALL_0 BIT(5)
#define BCH_BHINT_ALL_F BIT(4)
#define BCH_BHINT_DECF BIT(3)
#define BCH_BHINT_ENCF BIT(2)
#define BCH_BHINT_UNCOR BIT(1)
#define BCH_BHINT_ERR BIT(0)
/* Timeout for BCH calculation/correction. */
#define BCH_TIMEOUT_US 100000
static inline void jz4725b_bch_config_set(struct ingenic_ecc *bch, u32 cfg)
{
writel(cfg, bch->base + BCH_BHCSR);
}
static inline void jz4725b_bch_config_clear(struct ingenic_ecc *bch, u32 cfg)
{
writel(cfg, bch->base + BCH_BHCCR);
}
static int jz4725b_bch_reset(struct ingenic_ecc *bch,
struct ingenic_ecc_params *params, bool calc_ecc)
{
u32 reg, max_value;
/* Clear interrupt status. */
writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
/* Initialise and enable BCH. */
jz4725b_bch_config_clear(bch, 0x1f);
jz4725b_bch_config_set(bch, BCH_BHCR_BCHE);
if (params->strength == 8)
jz4725b_bch_config_set(bch, BCH_BHCR_BSEL);
else
jz4725b_bch_config_clear(bch, BCH_BHCR_BSEL);
if (calc_ecc) /* calculate ECC from data */
jz4725b_bch_config_set(bch, BCH_BHCR_ENCE);
else /* correct data from ECC */
jz4725b_bch_config_clear(bch, BCH_BHCR_ENCE);
jz4725b_bch_config_set(bch, BCH_BHCR_INIT);
max_value = BCH_BHCNT_ENC_COUNT_MASK >> BCH_BHCNT_ENC_COUNT_SHIFT;
if (params->size > max_value)
return -EINVAL;
max_value = BCH_BHCNT_DEC_COUNT_MASK >> BCH_BHCNT_DEC_COUNT_SHIFT;
if (params->size + params->bytes > max_value)
return -EINVAL;
/* Set up BCH count register. */
reg = params->size << BCH_BHCNT_ENC_COUNT_SHIFT;
reg |= (params->size + params->bytes) << BCH_BHCNT_DEC_COUNT_SHIFT;
writel(reg, bch->base + BCH_BHCNT);
return 0;
}
static void jz4725b_bch_disable(struct ingenic_ecc *bch)
{
/* Clear interrupts */
writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
/* Disable the hardware */
jz4725b_bch_config_clear(bch, BCH_BHCR_BCHE);
}
static void jz4725b_bch_write_data(struct ingenic_ecc *bch, const u8 *buf,
size_t size)
{
while (size--)
writeb(*buf++, bch->base + BCH_BHDR);
}
static void jz4725b_bch_read_parity(struct ingenic_ecc *bch, u8 *buf,
size_t size)
{
size_t size32 = size / sizeof(u32);
size_t size8 = size % sizeof(u32);
u32 *dest32;
u8 *dest8;
u32 val, offset = 0;
dest32 = (u32 *)buf;
while (size32--) {
*dest32++ = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
offset += sizeof(u32);
}
dest8 = (u8 *)dest32;
val = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
switch (size8) {
case 3:
dest8[2] = (val >> 16) & 0xff;
/* fall-through */
case 2:
dest8[1] = (val >> 8) & 0xff;
/* fall-through */
case 1:
dest8[0] = val & 0xff;
break;
}
}
static int jz4725b_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
u32 *status)
{
u32 reg;
int ret;
/*
* While we could use interrupts here and sleep until the operation
* completes, the controller works fairly quickly (usually a few
* microseconds) and so the overhead of sleeping until we get an
* interrupt quite noticeably decreases performance.
*/
ret = readl_relaxed_poll_timeout(bch->base + BCH_BHINT, reg,
reg & irq, 0, BCH_TIMEOUT_US);
if (ret)
return ret;
if (status)
*status = reg;
writel(reg, bch->base + BCH_BHINT);
return 0;
}
static int jz4725b_calculate(struct ingenic_ecc *bch,
struct ingenic_ecc_params *params,
const u8 *buf, u8 *ecc_code)
{
int ret;
mutex_lock(&bch->lock);
ret = jz4725b_bch_reset(bch, params, true);
if (ret) {
dev_err(bch->dev, "Unable to init BCH with given parameters\n");
goto out_disable;
}
jz4725b_bch_write_data(bch, buf, params->size);
ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL);
if (ret) {
dev_err(bch->dev, "timed out while calculating ECC\n");
goto out_disable;
}
jz4725b_bch_read_parity(bch, ecc_code, params->bytes);
out_disable:
jz4725b_bch_disable(bch);
mutex_unlock(&bch->lock);
return ret;
}
static int jz4725b_correct(struct ingenic_ecc *bch,
struct ingenic_ecc_params *params,
u8 *buf, u8 *ecc_code)
{
u32 reg, errors, bit;
unsigned int i;
int ret;
mutex_lock(&bch->lock);
ret = jz4725b_bch_reset(bch, params, false);
if (ret) {
dev_err(bch->dev, "Unable to init BCH with given parameters\n");
goto out;
}
jz4725b_bch_write_data(bch, buf, params->size);
jz4725b_bch_write_data(bch, ecc_code, params->bytes);
ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_DECF, &reg);
if (ret) {
dev_err(bch->dev, "timed out while correcting data\n");
goto out;
}
if (reg & (BCH_BHINT_ALL_F | BCH_BHINT_ALL_0)) {
/* Data and ECC is all 0xff or 0x00 - nothing to correct */
ret = 0;
goto out;
}
if (reg & BCH_BHINT_UNCOR) {
/* Uncorrectable ECC error */
ret = -EBADMSG;
goto out;
}
errors = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
/* Correct any detected errors. */
for (i = 0; i < errors; i++) {
if (i & 1) {
bit = (reg & BCH_BHERR_INDEX1_MASK) >> BCH_BHERR_INDEX1_SHIFT;
} else {
reg = readl(bch->base + BCH_BHERR0 + (i * 4));
bit = (reg & BCH_BHERR_INDEX0_MASK) >> BCH_BHERR_INDEX0_SHIFT;
}
buf[(bit >> 3)] ^= BIT(bit & 0x7);
}
out:
jz4725b_bch_disable(bch);
mutex_unlock(&bch->lock);
return ret;
}
static const struct ingenic_ecc_ops jz4725b_bch_ops = {
.disable = jz4725b_bch_disable,
.calculate = jz4725b_calculate,
.correct = jz4725b_correct,
};
static const struct of_device_id jz4725b_bch_dt_match[] = {
{ .compatible = "ingenic,jz4725b-bch", .data = &jz4725b_bch_ops },
{},
};
MODULE_DEVICE_TABLE(of, jz4725b_bch_dt_match);
static struct platform_driver jz4725b_bch_driver = {
.probe = ingenic_ecc_probe,
.driver = {
.name = "jz4725b-bch",
.of_match_table = jz4725b_bch_dt_match,
},
};
module_platform_driver(jz4725b_bch_driver);
MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
MODULE_DESCRIPTION("Ingenic JZ4725B BCH controller driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment