Commit 3e9e7c1d authored by Matt Porter's avatar Matt Porter Committed by Linus Torvalds

[PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-Boot

Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot
as bootloader.  The OpenBIOS bd_info struct is not used in the kernel
anymore (only U-Boot now).

uImage (U-Boot) tested on walnut, sycamore and bubinga
zImage (OpenBIOS) tested on sycamore, bubinga and ebony
Signed-off-by: default avatarStefan Roese <sr@denx.de>
Signed-off-by: default avatarMatt Porter <mporter@kernel.crashing.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 90eb2665
......@@ -67,6 +67,12 @@ zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE
entrypoint-$(CONFIG_BAMBOO) := 0x01000000
extra.o-$(CONFIG_BAMBOO) := pibs.o
zimage-$(CONFIG_BUBINGA) := zImage-TREE
zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE
end-$(CONFIG_BUBINGA) := bubinga
entrypoint-$(CONFIG_BUBINGA) := 0x01000000
extra.o-$(CONFIG_BUBINGA) := openbios.o
zimage-$(CONFIG_EBONY) := zImage-TREE
zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE
end-$(CONFIG_EBONY) := ebony
......@@ -91,6 +97,18 @@ zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE
entrypoint-$(CONFIG_OCOTEA) := 0x01000000
extra.o-$(CONFIG_OCOTEA) := pibs.o
zimage-$(CONFIG_SYCAMORE) := zImage-TREE
zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE
end-$(CONFIG_SYCAMORE) := sycamore
entrypoint-$(CONFIG_SYCAMORE) := 0x01000000
extra.o-$(CONFIG_SYCAMORE) := openbios.o
zimage-$(CONFIG_WALNUT) := zImage-TREE
zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE
end-$(CONFIG_WALNUT) := walnut
entrypoint-$(CONFIG_WALNUT) := 0x01000000
extra.o-$(CONFIG_WALNUT) := openbios.o
extra.o-$(CONFIG_EV64260) := misc-ev64260.o
end-$(CONFIG_EV64260) := ev64260
cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3)
......@@ -168,7 +186,8 @@ OBJCOPY_ARGS := -O elf32-powerpc
# head.o and relocate.o must be at the start.
boot-y := head.o relocate.o $(extra.o-y) $(misc-y)
boot-$(CONFIG_40x) += embed_config.o
boot-$(CONFIG_REDWOOD_5) += embed_config.o
boot-$(CONFIG_REDWOOD_6) += embed_config.o
boot-$(CONFIG_8xx) += embed_config.o
boot-$(CONFIG_8260) += embed_config.o
boot-$(CONFIG_BSEIP) += iic.o
......
......@@ -23,7 +23,7 @@
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/bootinfo.h>
#ifdef CONFIG_44x
#ifdef CONFIG_4xx
#include <asm/ibm4xx.h>
#endif
#include <asm/reg.h>
......@@ -88,6 +88,14 @@ get_mem_size(void)
return 0;
}
#if defined(CONFIG_40x)
#define PPC4xx_EMAC0_MR0 EMAC0_BASE
#endif
#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
#define PPC4xx_EMAC0_MR0 PPC44x_EMAC0_MR0
#endif
struct bi_record *
decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
{
......@@ -103,13 +111,13 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
com_port = serial_init(0, NULL);
#endif
#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
#if defined(PPC4xx_EMAC0_MR0)
/* Reset MAL */
mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);
/* Wait for reset */
while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};
/* Reset EMAC */
*(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000;
*(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000;
__asm__ __volatile__("eieio");
#endif
......@@ -164,7 +172,9 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
}
#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */
avail_ram = (char *)0x00400000;
#endif
end_avail = (char *)0x00800000;
puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" ");
puthex((unsigned long)end_avail); puts("\n");
......
/*
* arch/ppc/boot/simple/openbios.c
*
* 2005 (c) SYSGO AG - g.jaeger@sysgo.com
* Copyright (c) 2005 DENX Software Engineering
* Stefan Roese <sr@denx.de>
*
* Based on original work by
* 2005 (c) SYSGO AG - g.jaeger@sysgo.com
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*
* Derived from arch/ppc/boot/simple/pibs.c (from MontaVista)
*/
#include <linux/types.h>
#include <linux/config.h>
#include <linux/string.h>
#include <asm/ppcboot.h>
#include <platforms/4xx/ebony.h>
#include <asm/ibm4xx.h>
#include <asm/reg.h>
#ifdef CONFIG_40x
#include <asm/io.h>
#endif
#if defined(CONFIG_BUBINGA)
#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */
#else
#define BOARD_INFO_VECTOR 0xFFFE0B50
#endif
#ifdef CONFIG_40x
/* Supply a default Ethernet address for those eval boards that don't
* ship with one. This is an address from the MBX board I have, so
* it is unlikely you will find it on your network.
*/
static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
extern unsigned long timebase_period_ns;
#endif /* CONFIG_40x */
extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
unsigned long cksum);
......@@ -23,15 +47,85 @@ extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
bd_t *hold_residual = &hold_resid_buf;
typedef struct openbios_board_info {
unsigned char bi_s_version[4]; /* Version of this structure */
unsigned char bi_r_version[30]; /* Version of the IBM ROM */
unsigned int bi_memsize; /* DRAM installed, in bytes */
#ifdef CONFIG_405EP
unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */
#else /* CONFIG_405EP */
unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
#endif /* CONFIG_405EP */
unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
unsigned int bi_intfreq; /* Processor speed, in Hz */
unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
#ifdef CONFIG_405EP
unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */
unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */
#endif /* CONFIG_405EP */
} openbios_bd_t;
void *
load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
void *ign1, void *ign2)
{
decompress_kernel(load_addr, num_words, cksum);
#ifdef CONFIG_40x
openbios_bd_t *openbios_bd = NULL;
openbios_bd_t *(*get_board_info)(void) =
(openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
/*
* On 40x platforms we not only need the MAC-addresses, but also the
* clocks and memsize. Now try to get all values using the OpenBIOS
* "get_board_info()" callback.
*/
if ((openbios_bd = get_board_info()) != NULL) {
/*
* Copy bd_info from OpenBIOS struct into U-Boot struct
* used by kernel
*/
hold_residual->bi_memsize = openbios_bd->bi_memsize;
hold_residual->bi_intfreq = openbios_bd->bi_intfreq;
hold_residual->bi_busfreq = openbios_bd->bi_busfreq;
hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq;
memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6);
#ifdef CONFIG_405EP
memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6);
memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6);
hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq;
hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq;
#else /* CONFIG_405EP */
memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6);
#endif /* CONFIG_405EP */
} else {
/* Hmmm...better try to stuff some defaults.
*/
hold_residual->bi_memsize = 16 * 1024 * 1024;
hold_residual->bi_intfreq = 200000000;
hold_residual->bi_busfreq = 100000000;
hold_residual->bi_pci_busfreq = 66666666;
/*
* Only supply one mac-address in this fallback
*/
memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6);
#ifdef CONFIG_405EP
hold_residual->bi_opbfreq = 50000000;
hold_residual->bi_procfreq = 200000000;
#endif /* CONFIG_405EP */
}
timebase_period_ns = 1000000000 / hold_residual->bi_intfreq;
#endif /* CONFIG_40x */
#ifdef CONFIG_440GP
/* simply copy the MAC addresses */
memcpy(hold_residual->bi_enetaddr, (char *)EBONY_OPENBIOS_MAC_BASE, 6);
memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6);
memcpy(hold_residual->bi_enetaddr, (char *)OPENBIOS_MAC_BASE, 6);
memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6);
#endif /* CONFIG_440GP */
decompress_kernel(load_addr, num_words, cksum);
return (void *)hold_residual;
}
......@@ -225,7 +225,7 @@ config EMBEDDEDBOOT
config IBM_OPENBIOS
bool
depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
depends on ASH || REDWOOD_5 || REDWOOD_6
default y
config PPC4xx_DMA
......
......@@ -89,7 +89,7 @@ bubinga_early_serial_map(void)
* by 16.
*/
uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
uart_clock = __res.bi_pllouta_freq / uart_div;
uart_clock = __res.bi_procfreq / uart_div;
/* Setup serial port access */
memset(&port, 0, sizeof(port));
......
/*
* Support for IBM PPC 405EP evaluation board (Bubinga).
* arch/ppc/platforms/4xx/bubinga.h
*
* Author: SAW (IBM), derived from walnut.h.
* Maintained by MontaVista Software <source@mvista.com>
* Bubinga board definitions
*
* Copyright (c) 2005 DENX Software Engineering
* Stefan Roese <sr@denx.de>
*
* Based on original work by
* SAW (IBM)
* 2003 (c) MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* 2003 (c) MontaVista Softare Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is
* licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifdef __KERNEL__
#ifndef __BUBINGA_H__
#define __BUBINGA_H__
/* 405EP */
#include <linux/config.h>
#include <platforms/4xx/ibm405ep.h>
#ifndef __ASSEMBLY__
/*
* Data structure defining board information maintained by the boot
* ROM on IBM's evaluation board. An effort has been made to
* keep the field names consistent with the 8xx 'bd_t' board info
* structures.
*/
typedef struct board_info {
unsigned char bi_s_version[4]; /* Version of this structure */
unsigned char bi_r_version[30]; /* Version of the IBM ROM */
unsigned int bi_memsize; /* DRAM installed, in bytes */
unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
unsigned int bi_intfreq; /* Processor speed, in Hz */
unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */
unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */
} bd_t;
/* Some 4xx parts use a different timebase frequency from the internal clock.
*/
#define bi_tbfreq bi_intfreq
#include <asm/ppcboot.h>
/* Memory map for the Bubinga board.
* Generic 4xx plus RTC.
*/
extern void *bubinga_rtc_base;
#define BUBINGA_RTC_PADDR ((uint)0xf0000000)
#define BUBINGA_RTC_VADDR BUBINGA_RTC_PADDR
#define BUBINGA_RTC_SIZE ((uint)8*1024)
......@@ -58,12 +40,18 @@ extern void *bubinga_rtc_base;
* for typical configurations at various CPU speeds.
* The base baud is calculated as (FWDA / EXT UART DIV / 16)
*/
#define BASE_BAUD 0
#define BASE_BAUD 0
#define BUBINGA_FPGA_BASE 0xF0300000
/* Flash */
#define PPC40x_FPGA_BASE 0xF0300000
#define PPC40x_FPGA_REG_OFFS 1 /* offset to flash map reg */
#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
#define PPC40x_FLASH_LOW 0xFFF00000
#define PPC40x_FLASH_HIGH 0xFFF80000
#define PPC40x_FLASH_SIZE 0x80000
#define PPC4xx_MACHINE_NAME "IBM Bubinga"
#define PPC4xx_MACHINE_NAME "IBM Bubinga"
#endif /* !__ASSEMBLY__ */
#endif /* __BUBINGA_H__ */
#endif /* __KERNEL__ */
......@@ -24,8 +24,8 @@
#define PPC44x_EMAC0_MR0 0xE0000800
/* Where to find the MAC info */
#define EBONY_OPENBIOS_MAC_BASE 0xfffffe0c
#define EBONY_OPENBIOS_MAC_OFFSET 0x0c
#define OPENBIOS_MAC_BASE 0xfffffe0c
#define OPENBIOS_MAC_OFFSET 0x0c
/* Default clock rates for Rev. B and Rev. C silicon */
#define EBONY_440GP_RB_SYSCLK 33000000
......
......@@ -88,9 +88,6 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
void __init
sycamore_setup_arch(void)
{
#define SYCAMORE_PS2_BASE 0xF0100000
#define SYCAMORE_FPGA_BASE 0xF0300000
void *fpga_brdc;
unsigned char fpga_brdc_data;
void *fpga_enable;
......@@ -100,7 +97,7 @@ sycamore_setup_arch(void)
ppc4xx_setup_arch();
ibm_ocp_set_emac(0, 1);
ibm_ocp_set_emac(0, 0);
kb_data = ioremap(SYCAMORE_PS2_BASE, 8);
if (!kb_data) {
......@@ -111,7 +108,7 @@ sycamore_setup_arch(void)
kb_cs = kb_data + 1;
fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8);
fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
if (!fpga_status) {
printk(KERN_CRIT
"sycamore_setup_arch() fpga_status ioremap failed\n");
......
/*
* arch/ppc/platforms/4xx/sycamore.h
*
* Macros, definitions, and data structures specific to the IBM PowerPC
* 405GPr "Sycamore" evaluation board.
* Sycamore board definitions
*
* Author: Armin Kuster <akuster@mvista.com>
* Copyright (c) 2005 DENX Software Engineering
* Stefan Roese <sr@denx.de>
*
* Based on original work by
* Armin Kuster <akuster@mvista.com>
* 2000 (c) MontaVista, Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* 2000 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifdef __KERNEL__
#ifndef __ASM_SYCAMORE_H__
#define __ASM_SYCAMORE_H__
#include <linux/config.h>
#include <platforms/4xx/ibm405gpr.h>
#include <asm/ppcboot.h>
#ifndef __ASSEMBLY__
/*
* Data structure defining board information maintained by the boot
* ROM on IBM's "Sycamore" evaluation board. An effort has been made to
* keep the field names consistent with the 8xx 'bd_t' board info
* structures.
*/
typedef struct board_info {
unsigned char bi_s_version[4]; /* Version of this structure */
unsigned char bi_r_version[30]; /* Version of the IBM ROM */
unsigned int bi_memsize; /* DRAM installed, in bytes */
unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
unsigned int bi_intfreq; /* Processor speed, in Hz */
unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
} bd_t;
/* Some 4xx parts use a different timebase frequency from the internal clock.
*/
#define bi_tbfreq bi_intfreq
/* Memory map for the IBM "Sycamore" 405GP evaluation board.
/* Memory map for the IBM "Sycamore" 405GPr evaluation board.
* Generic 4xx plus RTC.
*/
extern void *sycamore_rtc_base;
#define SYCAMORE_RTC_PADDR ((uint)0xf0000000)
#define SYCAMORE_RTC_VADDR SYCAMORE_RTC_PADDR
#define SYCAMORE_RTC_SIZE ((uint)8*1024)
#define SYCAMORE_RTC_SIZE ((uint)8*1024)
#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
#define BASE_BAUD 201600
#else
#define BASE_BAUD 691200
#endif
#define SYCAMORE_PS2_BASE 0xF0100000
#define SYCAMORE_FPGA_BASE 0xF0300000
#define SYCAMORE_PS2_BASE 0xF0100000
/* Flash */
#define PPC40x_FPGA_BASE 0xF0300000
#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */
#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
#define PPC40x_FLASH_LOW 0xFFF00000
#define PPC40x_FLASH_HIGH 0xFFF80000
#define PPC40x_FLASH_SIZE 0x80000
#define PPC4xx_MACHINE_NAME "IBM Sycamore"
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_SYCAMORE_H__ */
#endif /* __KERNEL__ */
......@@ -90,7 +90,7 @@ walnut_setup_arch(void)
kb_cs = kb_data + 1;
fpga_status = ioremap(WALNUT_FPGA_BASE, 8);
fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
if (!fpga_status) {
printk(KERN_CRIT
"walnut_setup_arch() fpga_status ioremap failed\n");
......
/*
* arch/ppc/platforms/4xx/walnut.h
*
* Macros, definitions, and data structures specific to the IBM PowerPC
* 405GP "Walnut" evaluation board.
* Walnut board definitions
*
* Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand
* <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or
* source@mvista.com
* Copyright (c) 2005 DENX Software Engineering
* Stefan Roese <sr@denx.de>
*
* Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
* Based on original work by
* Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
* Frank Rowand <frank_rowand@mvista.com>
* Debbie Chu <debbie_chu@mvista.com>
* 2000 (c) MontaVista, Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* 2000 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifdef __KERNEL__
#ifndef __ASM_WALNUT_H__
#define __ASM_WALNUT_H__
/* We have a 405GP core */
#include <linux/config.h>
#include <platforms/4xx/ibm405gp.h>
#ifndef __ASSEMBLY__
/*
* Data structure defining board information maintained by the boot
* ROM on IBM's "Walnut" evaluation board. An effort has been made to
* keep the field names consistent with the 8xx 'bd_t' board info
* structures.
*/
typedef struct board_info {
unsigned char bi_s_version[4]; /* Version of this structure */
unsigned char bi_r_version[30]; /* Version of the IBM ROM */
unsigned int bi_memsize; /* DRAM installed, in bytes */
unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
unsigned int bi_intfreq; /* Processor speed, in Hz */
unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
} bd_t;
/* Some 4xx parts use a different timebase frequency from the internal clock.
*/
#define bi_tbfreq bi_intfreq
#include <asm/ppcboot.h>
/* Memory map for the IBM "Walnut" 405GP evaluation board.
* Generic 4xx plus RTC.
*/
extern void *walnut_rtc_base;
#define WALNUT_RTC_PADDR ((uint)0xf0000000)
#define WALNUT_RTC_VADDR WALNUT_RTC_PADDR
#define WALNUT_RTC_SIZE ((uint)8*1024)
#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
#define BASE_BAUD 201600
#else
#define BASE_BAUD 691200
#endif
#define WALNUT_PS2_BASE 0xF0100000
#define WALNUT_FPGA_BASE 0xF0300000
/* Flash */
#define PPC40x_FPGA_BASE 0xF0300000
#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */
#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
#define PPC40x_FLASH_LOW 0xFFF00000
#define PPC40x_FLASH_HIGH 0xFFF80000
#define PPC40x_FLASH_SIZE 0x80000
#define WALNUT_FPGA_BASE PPC40x_FPGA_BASE
#define PPC4xx_MACHINE_NAME "IBM Walnut"
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_WALNUT_H__ */
#endif /* __KERNEL__ */
......@@ -131,9 +131,22 @@ static inline void ibm_ocp_set_emac(int start, int end)
/* Copy MAC addresses to EMAC additions */
for (i=start; i<=end; i++) {
def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
&__res.bi_enetaddr[i],
6);
if (i == 0)
memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
__res.bi_enetaddr, 6);
#if defined(CONFIG_405EP) || defined(CONFIG_44x)
else if (i == 1)
memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
__res.bi_enet1addr, 6);
#endif
#if defined(CONFIG_440GX)
else if (i == 2)
memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
__res.bi_enet2addr, 6);
else if (i == 3)
memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
__res.bi_enet3addr, 6);
#endif
}
}
#endif
......
......@@ -73,8 +73,8 @@ typedef struct bd_info {
#if defined(CONFIG_HYMOD)
hymod_conf_t bi_hymod_conf; /* hymod configuration information */
#endif
#if defined(CONFIG_EVB64260) || defined(CONFIG_44x) || defined(CONFIG_85xx) ||\
defined(CONFIG_83xx)
#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x) || \
defined(CONFIG_85xx) || defined(CONFIG_83xx)
/* second onboard ethernet port */
unsigned char bi_enet1addr[6];
#endif
......@@ -96,5 +96,7 @@ typedef struct bd_info {
#endif
} bd_t;
#define bi_tbfreq bi_intfreq
#endif /* __ASSEMBLY__ */
#endif /* __ASM_PPCBOOT_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment