ARM: davinci: add missing sentinels to GPIO lookup tables

Some GPIO lookup tables defined in davinci board files are missing
array sentinels. If an entry for given device cannot be found, this
will cause a kernel panic.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

arch/arm/mach-davinci/board-da830-evm.c

@@ -58,6 +58,7 @@ static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
 	.table = {
 		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0),
 		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
+		{ }
 	},
 };
 
@@ -156,6 +157,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 			    GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_LOW),
+		{ }
 	},
 };
 

arch/arm/mach-davinci/board-da850-evm.c

@@ -784,6 +784,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 			    GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_HIGH),
+		{ }
 	},
 };
 

arch/arm/mach-davinci/board-dm355-evm.c

@@ -121,6 +121,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -663,6 +663,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -303,6 +303,7 @@ static struct gpiod_lookup_table hawk_usb_gpio_lookup = {
 	.table = {
 		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0),
 		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
+		{ }
 	},
 };