Commit 3eaae1d0 authored by Vladimir Oltean's avatar Vladimir Oltean Committed by David S. Miller

net: dsa: tag_8021q: support up to 8 VLANs per port using sub-VLANs

For switches that support VLAN retagging, such as sja1105, we extend
dsa_8021q by encoding a "sub-VLAN" into the remaining 3 free bits in the
dsa_8021q tag.

A sub-VLAN is nothing more than a number in the range 0-7, which serves
as an index into a per-port driver lookup table. The sub-VLAN value of
zero means that traffic is untagged (this is also backwards-compatible
with dsa_8021q without retagging).

The switch should be configured to retag VLAN-tagged traffic that gets
transmitted towards the CPU port (and towards the CPU only). Example:

bridge vlan add dev sw1p0 vid 100

The switch retags frames received on port 0, going to the CPU, and
having VID 100, to the VID of 1104 (0x0450). In dsa_8021q language:

 | 11  | 10  |  9  |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  |  0  |
 +-----------+-----+-----------------+-----------+-----------------------+
 |    DIR    | SVL |    SWITCH_ID    |  SUBVLAN  |          PORT         |
 +-----------+-----+-----------------+-----------+-----------------------+

0x0450 means:
 - DIR = 0b01: this is an RX VLAN
 - SUBVLAN = 0b001: this is subvlan #1
 - SWITCH_ID = 0b001: this is switch 1 (see the name "sw1p0")
 - PORT = 0b0000: this is port 0 (see the name "sw1p0")

The driver also remembers the "1 -> 100" mapping. In the hotpath, if the
sub-VLAN from the tag encodes a non-untagged frame, this mapping is used
to create a VLAN hwaccel tag, with the value of 100.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 38b5beea
......@@ -20,6 +20,8 @@ struct dsa_8021q_crosschip_link {
refcount_t refcount;
};
#define DSA_8021Q_N_SUBVLAN 8
#if IS_ENABLED(CONFIG_NET_DSA_TAG_8021Q)
int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int index,
......@@ -42,10 +44,14 @@ u16 dsa_8021q_tx_vid(struct dsa_switch *ds, int port);
u16 dsa_8021q_rx_vid(struct dsa_switch *ds, int port);
u16 dsa_8021q_rx_vid_subvlan(struct dsa_switch *ds, int port, u16 subvlan);
int dsa_8021q_rx_switch_id(u16 vid);
int dsa_8021q_rx_source_port(u16 vid);
u16 dsa_8021q_rx_subvlan(u16 vid);
bool vid_is_dsa_8021q(u16 vid);
#else
......@@ -88,6 +94,11 @@ u16 dsa_8021q_rx_vid(struct dsa_switch *ds, int port)
return 0;
}
u16 dsa_8021q_rx_vid_subvlan(struct dsa_switch *ds, int port, u16 subvlan)
{
return 0;
}
int dsa_8021q_rx_switch_id(u16 vid)
{
return 0;
......@@ -98,6 +109,11 @@ int dsa_8021q_rx_source_port(u16 vid)
return 0;
}
u16 dsa_8021q_rx_subvlan(u16 vid)
{
return 0;
}
bool vid_is_dsa_8021q(u16 vid)
{
return false;
......
......@@ -17,7 +17,7 @@
*
* | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
* +-----------+-----+-----------------+-----------+-----------------------+
* | DIR | RSV | SWITCH_ID | RSV | PORT |
* | DIR | SVL | SWITCH_ID | SUBVLAN | PORT |
* +-----------+-----+-----------------+-----------+-----------------------+
*
* DIR - VID[11:10]:
......@@ -27,17 +27,24 @@
* These values make the special VIDs of 0, 1 and 4095 to be left
* unused by this coding scheme.
*
* RSV - VID[9]:
* To be used for further expansion of SWITCH_ID or for other purposes.
* Must be transmitted as zero and ignored on receive.
* SVL/SUBVLAN - { VID[9], VID[5:4] }:
* Sub-VLAN encoding. Valid only when DIR indicates an RX VLAN.
* * 0 (0b000): Field does not encode a sub-VLAN, either because
* received traffic is untagged, PVID-tagged or because a second
* VLAN tag is present after this tag and not inside of it.
* * 1 (0b001): Received traffic is tagged with a VID value private
* to the host. This field encodes the index in the host's lookup
* table through which the value of the ingress VLAN ID can be
* recovered.
* * 2 (0b010): Field encodes a sub-VLAN.
* ...
* * 7 (0b111): Field encodes a sub-VLAN.
* When DIR indicates a TX VLAN, SUBVLAN must be transmitted as zero
* (by the host) and ignored on receive (by the switch).
*
* SWITCH_ID - VID[8:6]:
* Index of switch within DSA tree. Must be between 0 and 7.
*
* RSV - VID[5:4]:
* To be used for further expansion of PORT or for other purposes.
* Must be transmitted as zero and ignored on receive.
*
* PORT - VID[3:0]:
* Index of switch port. Must be between 0 and 15.
*/
......@@ -54,6 +61,18 @@
#define DSA_8021Q_SWITCH_ID(x) (((x) << DSA_8021Q_SWITCH_ID_SHIFT) & \
DSA_8021Q_SWITCH_ID_MASK)
#define DSA_8021Q_SUBVLAN_HI_SHIFT 9
#define DSA_8021Q_SUBVLAN_HI_MASK GENMASK(9, 9)
#define DSA_8021Q_SUBVLAN_LO_SHIFT 4
#define DSA_8021Q_SUBVLAN_LO_MASK GENMASK(4, 3)
#define DSA_8021Q_SUBVLAN_HI(x) (((x) & GENMASK(2, 2)) >> 2)
#define DSA_8021Q_SUBVLAN_LO(x) ((x) & GENMASK(1, 0))
#define DSA_8021Q_SUBVLAN(x) \
(((DSA_8021Q_SUBVLAN_LO(x) << DSA_8021Q_SUBVLAN_LO_SHIFT) & \
DSA_8021Q_SUBVLAN_LO_MASK) | \
((DSA_8021Q_SUBVLAN_HI(x) << DSA_8021Q_SUBVLAN_HI_SHIFT) & \
DSA_8021Q_SUBVLAN_HI_MASK))
#define DSA_8021Q_PORT_SHIFT 0
#define DSA_8021Q_PORT_MASK GENMASK(3, 0)
#define DSA_8021Q_PORT(x) (((x) << DSA_8021Q_PORT_SHIFT) & \
......@@ -79,6 +98,13 @@ u16 dsa_8021q_rx_vid(struct dsa_switch *ds, int port)
}
EXPORT_SYMBOL_GPL(dsa_8021q_rx_vid);
u16 dsa_8021q_rx_vid_subvlan(struct dsa_switch *ds, int port, u16 subvlan)
{
return DSA_8021Q_DIR_RX | DSA_8021Q_SWITCH_ID(ds->index) |
DSA_8021Q_PORT(port) | DSA_8021Q_SUBVLAN(subvlan);
}
EXPORT_SYMBOL_GPL(dsa_8021q_rx_vid_subvlan);
/* Returns the decoded switch ID from the RX VID. */
int dsa_8021q_rx_switch_id(u16 vid)
{
......@@ -93,6 +119,20 @@ int dsa_8021q_rx_source_port(u16 vid)
}
EXPORT_SYMBOL_GPL(dsa_8021q_rx_source_port);
/* Returns the decoded subvlan from the RX VID. */
u16 dsa_8021q_rx_subvlan(u16 vid)
{
u16 svl_hi, svl_lo;
svl_hi = (vid & DSA_8021Q_SUBVLAN_HI_MASK) >>
DSA_8021Q_SUBVLAN_HI_SHIFT;
svl_lo = (vid & DSA_8021Q_SUBVLAN_LO_MASK) >>
DSA_8021Q_SUBVLAN_LO_SHIFT;
return (svl_hi << 2) | svl_lo;
}
EXPORT_SYMBOL_GPL(dsa_8021q_rx_subvlan);
bool vid_is_dsa_8021q(u16 vid)
{
return ((vid & DSA_8021Q_DIR_MASK) == DSA_8021Q_DIR_RX ||
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment