Commit 3eab4588 authored by Charlie Mooney's avatar Charlie Mooney Committed by Dmitry Torokhov

Input: elan_i2c - set input device's vendor and product IDs

Previously the "vendor" and "product" IDs for the elan_i2c driver simply
reported 0000.  This patch modifies the elan_i2c driver to include the
Elan vendor ID and the touchpad's product id under
input/input*/{vendor,product}.

Specifically, this is to allow us to apply a generic Elan gestures config
that will apply to all Elan touchpads on ChromeOS.  These configs  match to
input devices in various ways, but one major way is by matching on vendor
ID.  Adding this patch allows the default Elan touchpad config to be
applied to Elan touchpads in this kernel by matching on devices that have
vendor ID 04f3.

Note that product ID is also available via custom sysfs entry "product_id"
as well.
Signed-off-by: default avatarCharlie Mooney <charliemooney@chromium.org>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent fd18ab89
...@@ -41,6 +41,7 @@ ...@@ -41,6 +41,7 @@
#define DRIVER_NAME "elan_i2c" #define DRIVER_NAME "elan_i2c"
#define ELAN_DRIVER_VERSION "1.6.1" #define ELAN_DRIVER_VERSION "1.6.1"
#define ELAN_VENDOR_ID 0x04f3
#define ETP_MAX_PRESSURE 255 #define ETP_MAX_PRESSURE 255
#define ETP_FWIDTH_REDUCE 90 #define ETP_FWIDTH_REDUCE 90
#define ETP_FINGER_WIDTH 15 #define ETP_FINGER_WIDTH 15
...@@ -914,6 +915,8 @@ static int elan_setup_input_device(struct elan_tp_data *data) ...@@ -914,6 +915,8 @@ static int elan_setup_input_device(struct elan_tp_data *data)
input->name = "Elan Touchpad"; input->name = "Elan Touchpad";
input->id.bustype = BUS_I2C; input->id.bustype = BUS_I2C;
input->id.vendor = ELAN_VENDOR_ID;
input->id.product = data->product_id;
input_set_drvdata(input, data); input_set_drvdata(input, data);
error = input_mt_init_slots(input, ETP_MAX_FINGERS, error = input_mt_init_slots(input, ETP_MAX_FINGERS,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment