Commit 3ec481ed authored by Matt Porter's avatar Matt Porter Committed by Shawn Guo

ARM: dts: imx: Add dr_mode host setting to all host-only usb instances

The chipidea driver adds an extra line of spam to the log when a
host-only chipidea instance is left set to the default of a dual role
controller.

[    2.010873] ci_hdrc ci_hdrc.1: doesn't support gadget

Set the dr_mode property to host on all the host-only nodes
to avoid this warning.
Signed-off-by: default avatarMatt Porter <mporter@konsulko.com>
Acked-by: default avatarPeter Chen <peter.chen@freescale.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 27b0b9d8
......@@ -488,6 +488,7 @@ usbh1: usb@10024200 {
interrupts = <54>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
status = "disabled";
};
......@@ -497,6 +498,7 @@ usbh2: usb@10024400 {
interrupts = <55>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
};
......
......@@ -1197,6 +1197,7 @@ usb1: usb@80090000 {
interrupts = <92>;
clocks = <&clks 61>;
fsl,usbphy = <&usbphy1>;
dr_mode = "host";
status = "disabled";
};
......
......@@ -318,6 +318,7 @@ usbhost1: usb@53ff4400 {
clocks = <&clks 73>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
dr_mode = "host";
status = "disabled";
};
......
......@@ -197,6 +197,7 @@ usbh1: usb@53f80200 {
reg = <0x53f80200 0x0200>;
interrupts = <14>;
clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
dr_mode = "host";
status = "disabled";
};
......@@ -205,6 +206,7 @@ usbh2: usb@53f80400 {
reg = <0x53f80400 0x0200>;
interrupts = <16>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
dr_mode = "host";
status = "disabled";
};
......@@ -213,6 +215,7 @@ usbh3: usb@53f80600 {
reg = <0x53f80600 0x0200>;
interrupts = <17>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
dr_mode = "host";
status = "disabled";
};
......
......@@ -265,6 +265,7 @@ usbh1: usb@73f80200 {
interrupts = <14>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
status = "disabled";
};
......@@ -274,6 +275,7 @@ usbh2: usb@73f80400 {
interrupts = <16>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
};
......@@ -283,6 +285,7 @@ usbh3: usb@73f80600 {
interrupts = <17>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
dr_mode = "host";
status = "disabled";
};
......
......@@ -309,6 +309,7 @@ usbh1: usb@53f80200 {
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
dr_mode = "host";
status = "disabled";
};
......@@ -318,6 +319,7 @@ usbh2: usb@53f80400 {
interrupts = <16>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
};
......@@ -327,6 +329,7 @@ usbh3: usb@53f80600 {
interrupts = <17>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
dr_mode = "host";
status = "disabled";
};
......
......@@ -850,6 +850,7 @@ usbh1: usb@02184200 {
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
status = "disabled";
};
......@@ -859,6 +860,7 @@ usbh2: usb@02184400 {
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
};
......@@ -868,6 +870,7 @@ usbh3: usb@02184600 {
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 3>;
dr_mode = "host";
status = "disabled";
};
......
......@@ -703,6 +703,7 @@ usbh: usb@02184400 {
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
};
......
......@@ -767,6 +767,7 @@ usbh: usb@02184400 {
fsl,usbmisc = <&usbmisc 2>;
phy_type = "hsic";
fsl,anatop = <&anatop>;
dr_mode = "host";
status = "disabled";
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment