PCI: Add no PM reset quirk for NVIDIA Spectrum devices

Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a
reset (i.e., they advertise NoSoftRst-). However, this transition does
not have any effect on the device: It continues to be operational and
network ports remain up. Advertising this support makes it seem as if a
PM reset is viable for these devices. Mark it as unavailable to skip it
when testing reset methods.

Before:

 # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
 pm bus

After:

 # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
 bus
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/pci/quirks.c

@@ -3786,6 +3786,19 @@ static void quirk_no_pm_reset(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
 			       PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset);
 
+/*
+ * Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a reset
+ * (i.e., they advertise NoSoftRst-). However, this transition does not have
+ * any effect on the device: It continues to be operational and network ports
+ * remain up. Advertising this support makes it seem as if a PM reset is viable
+ * for these devices. Mark it as unavailable to skip it when testing reset
+ * methods.
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcb84, quirk_no_pm_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcf6c, quirk_no_pm_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcf70, quirk_no_pm_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcf80, quirk_no_pm_reset);
+
 /*
  * Thunderbolt controllers with broken MSI hotplug signaling:
  * Entire 1st generation (Light Ridge, Eagle Ridge, Light Peak) and part