Commit 3f339074 authored by Tomasz Figa's avatar Tomasz Figa Committed by Felipe Balbi

usb: phy: samsung: Pass set_isolation callback through driver data

This patch extends driver data structure with set_isolation callback,
which allows to remove the need for checking for SoC type in a switch
statement.
Signed-off-by: default avatarTomasz Figa <t.figa@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 0aa823a2
......@@ -73,7 +73,7 @@ EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt);
* Here 'on = true' would mean USB PHY block is isolated, hence
* de-activated and vice-versa.
*/
void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on)
{
void __iomem *reg = NULL;
u32 reg_val;
......@@ -84,32 +84,12 @@ void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
return;
}
switch (sphy->drv_data->cpu_type) {
case TYPE_S3C64XX:
/*
* Do nothing: We will add here once S3C64xx goes for DT support
*/
break;
case TYPE_EXYNOS4210:
/*
* Fall through since exynos4210 and exynos5250 have similar
* register architecture: two separate registers for host and
* device phy control with enable bit at position 0.
*/
case TYPE_EXYNOS5250:
if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
reg = sphy->pmuregs +
sphy->drv_data->devphy_reg_offset;
en_mask = sphy->drv_data->devphy_en_mask;
} else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
reg = sphy->pmuregs +
sphy->drv_data->hostphy_reg_offset;
en_mask = sphy->drv_data->hostphy_en_mask;
}
break;
default:
dev_err(sphy->dev, "Invalid SoC type\n");
return;
if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset;
en_mask = sphy->drv_data->devphy_en_mask;
} else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
reg = sphy->pmuregs + sphy->drv_data->hostphy_reg_offset;
en_mask = sphy->drv_data->hostphy_en_mask;
}
reg_val = readl(reg);
......@@ -121,7 +101,7 @@ void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
writel(reg_val, reg);
}
EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation);
EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210);
/*
* Configure the mode of working of usb-phy here: HOST/DEVICE.
......
......@@ -271,6 +271,7 @@ struct samsung_usbphy_drvdata {
u32 devphy_reg_offset;
u32 hostphy_reg_offset;
int (*rate_to_clksel)(struct samsung_usbphy *, unsigned long);
void (*set_isolation)(struct samsung_usbphy *, bool);
};
/*
......@@ -323,7 +324,8 @@ static inline const struct samsung_usbphy_drvdata
}
extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy);
extern void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on);
extern void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy,
bool on);
extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy);
extern int samsung_usbphy_set_type(struct usb_phy *phy,
enum samsung_usb_phy_type phy_type);
......
......@@ -284,8 +284,8 @@ static int samsung_usb2phy_init(struct usb_phy *phy)
/* Disable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(false);
else
samsung_usbphy_set_isolation(sphy, false);
else if (sphy->drv_data->set_isolation)
sphy->drv_data->set_isolation(sphy, false);
/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
samsung_usbphy_cfg_sel(sphy);
......@@ -342,8 +342,8 @@ static void samsung_usb2phy_shutdown(struct usb_phy *phy)
/* Enable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(true);
else
samsung_usbphy_set_isolation(sphy, true);
else if (sphy->drv_data->set_isolation)
sphy->drv_data->set_isolation(sphy, true);
spin_unlock_irqrestore(&sphy->lock, flags);
......@@ -442,6 +442,7 @@ static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = {
.cpu_type = TYPE_S3C64XX,
.devphy_en_mask = S3C64XX_USBPHY_ENABLE,
.rate_to_clksel = samsung_usbphy_rate_to_clksel_64xx,
.set_isolation = NULL, /* TODO */
};
static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
......@@ -449,6 +450,7 @@ static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
.rate_to_clksel = samsung_usbphy_rate_to_clksel_64xx,
.set_isolation = samsung_usbphy_set_isolation_4210,
};
static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
......@@ -456,6 +458,7 @@ static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
.rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12,
.set_isolation = samsung_usbphy_set_isolation_4210,
};
#ifdef CONFIG_OF
......
......@@ -184,7 +184,8 @@ static int samsung_usb3phy_init(struct usb_phy *phy)
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
/* Disable phy isolation */
samsung_usbphy_set_isolation(sphy, false);
if (sphy->drv_data->set_isolation)
sphy->drv_data->set_isolation(sphy, false);
/* Initialize usb phy registers */
samsung_exynos5_usb3phy_enable(sphy);
......@@ -221,7 +222,8 @@ static void samsung_usb3phy_shutdown(struct usb_phy *phy)
samsung_exynos5_usb3phy_disable(sphy);
/* Enable phy isolation */
samsung_usbphy_set_isolation(sphy, true);
if (sphy->drv_data->set_isolation)
sphy->drv_data->set_isolation(sphy, true);
spin_unlock_irqrestore(&sphy->lock, flags);
......@@ -304,6 +306,7 @@ static struct samsung_usbphy_drvdata usb3phy_exynos5 = {
.cpu_type = TYPE_EXYNOS5250,
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
.rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12,
.set_isolation = samsung_usbphy_set_isolation_4210,
};
#ifdef CONFIG_OF
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment