Commit 3f88afdf authored by Dmitry Lifshitz's avatar Dmitry Lifshitz Committed by Tony Lindgren

ARM: dts: sbc-t3730: add pinmux for usb hub reset

GPIO167 is used as SB-T35 baseboard USB Hub reset.
Add GPIO167 pinmux.
Signed-off-by: default avatarDmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent ce5abbb8
...@@ -10,6 +10,17 @@ / { ...@@ -10,6 +10,17 @@ / {
compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
}; };
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <&sb_t35_usb_hub_pins>;
sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
>;
};
};
&gpmc { &gpmc {
ranges = <5 0 0x2c000000 0x01000000>, ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>; <4 0 0x2d000000 0x01000000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment