Commit 3f94cf15 authored by Jae Hyun Yoo's avatar Jae Hyun Yoo Committed by Joel Stanley

soc: aspeed: snoop: Add clock control logic

If LPC SNOOP driver is registered ahead of lpc-ctrl module, LPC
SNOOP block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupt in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.

To prevent this issue, all LPC sub-nodes should enable LCLK
individually so this patch adds clock control logic into the LPC
SNOOP driver.

Fixes: 3772e5da ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Signed-off-by: default avatarJae Hyun Yoo <jae.hyun.yoo@intel.com>
Signed-off-by: default avatarVernon Mauery <vernon.mauery@linux.intel.com>
Signed-off-by: default avatarJohn Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: default avatarJoel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201208091748.1920-1-wangzhiqiang.bj@bytedance.comSigned-off-by: default avatarJoel Stanley <joel@jms.id.au>
parent 5c8fe583
......@@ -11,6 +11,7 @@
*/
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
#include <linux/kfifo.h>
......@@ -67,6 +68,7 @@ struct aspeed_lpc_snoop_channel {
struct aspeed_lpc_snoop {
struct regmap *regmap;
int irq;
struct clk *clk;
struct aspeed_lpc_snoop_channel chan[NUM_SNOOP_CHANNELS];
};
......@@ -282,22 +284,42 @@ static int aspeed_lpc_snoop_probe(struct platform_device *pdev)
return -ENODEV;
}
lpc_snoop->clk = devm_clk_get(dev, NULL);
if (IS_ERR(lpc_snoop->clk)) {
rc = PTR_ERR(lpc_snoop->clk);
if (rc != -EPROBE_DEFER)
dev_err(dev, "couldn't get clock\n");
return rc;
}
rc = clk_prepare_enable(lpc_snoop->clk);
if (rc) {
dev_err(dev, "couldn't enable clock\n");
return rc;
}
rc = aspeed_lpc_snoop_config_irq(lpc_snoop, pdev);
if (rc)
return rc;
goto err;
rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 0, port);
if (rc)
return rc;
goto err;
/* Configuration of 2nd snoop channel port is optional */
if (of_property_read_u32_index(dev->of_node, "snoop-ports",
1, &port) == 0) {
rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 1, port);
if (rc)
if (rc) {
aspeed_lpc_disable_snoop(lpc_snoop, 0);
goto err;
}
}
return 0;
err:
clk_disable_unprepare(lpc_snoop->clk);
return rc;
}
......@@ -309,6 +331,8 @@ static int aspeed_lpc_snoop_remove(struct platform_device *pdev)
aspeed_lpc_disable_snoop(lpc_snoop, 0);
aspeed_lpc_disable_snoop(lpc_snoop, 1);
clk_disable_unprepare(lpc_snoop->clk);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment