Merge tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - add support for more BCM47XX based devices

 - add MIPS support for brcmstb PCIe controller

 - add Loongson 2K1000 reset driver

 - remove board support for rbtx4938/rbtx4939

 - remove support for TX4939 SoCs

 - fixes and cleanups

* tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits)
  MIPS: ath79: drop _machine_restart again
  PCI: brcmstb: Augment driver for MIPs SOCs
  MIPS: bmips: Remove obsolete DMA mapping support
  MIPS: bmips: Add support PCIe controller device nodes
  dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs
  MIPS: compressed: Fix build with ZSTD compression
  MIPS: BCM47XX: Add support for Netgear WN2500RP v1 & v2
  MIPS: BCM47XX: Add support for Netgear R6300 v1
  MIPS: BCM47XX: Add LEDs and buttons for Asus RTN-10U
  MIPS: BCM47XX: Add board entry for Linksys WRT320N v1
  MIPS: BCM47XX: Define Linksys WRT310N V2 buttons
  MIPS: Remove duplicated include in local.h
  MIPS: retire "asm/llsc.h"
  MIPS: rework local_t operation on MIPS64
  MIPS: fix local_{add,sub}_return on MIPS64
  mips/pci: remove redundant ret variable
  MIPS: Loongson64: Add missing of_node_put() in ls2k_reset_init()
  MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS
  MIPS: enable both vmlinux.gz.itb and vmlinuz for generic
  MIPS: signal: Return immediately if call fails
  ...

Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson 2K1000 PM Controller
+
+maintainers:
+  - Qing Zhang <zhangqing@loongson.cn>
+
+description: |
+  This controller can be found in Loongson-2K1000 Soc systems.
+
+properties:
+  compatible:
+    const: loongson,ls2k-pm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pm: reset-controller@1fe07000 {
+            compatible = "loongson,ls2k-pm";
+            reg = <0 0x1fe07000 0 0x422>;
+        };
+    };
+...

Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

@@ -19,6 +19,8 @@ properties:
           - brcm,bcm7278-pcie # Broadcom 7278 Arm
           - brcm,bcm7216-pcie # Broadcom 7216 Arm
           - brcm,bcm7445-pcie # Broadcom 7445 Arm
+          - brcm,bcm7425-pcie # Broadcom 7425 MIPs
+          - brcm,bcm7435-pcie # Broadcom 7435 MIPs
 
   reg:
     maxItems: 1

arch/mips/Kconfig

@@ -264,7 +264,6 @@ config BMIPS_GENERIC
 	bool "Broadcom Generic BMIPS kernel"
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
-	select ARCH_HAS_PHYS_TO_DMA
 	select BOOT_RAW
 	select NO_EXCEPT_FILL
 	select USE_OF
@@ -640,9 +639,6 @@ config MACH_REALTEK_RTL
 	select SYS_SUPPORTS_MIPS16
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_VPE_LOADER
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_HAS_EARLY_PRINTK_8250
-	select USE_GENERIC_EARLY_PRINTK_8250
 	select BOOT_RAW
 	select PINCTRL
 	select USE_OF
@@ -765,7 +761,6 @@ config SGI_IP30
 	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select IRQ_DOMAIN_HIERARCHY
-	select NR_CPUS_DEFAULT_2
 	select PCI_DRIVERS_GENERIC
 	select PCI_XTALK_BRIDGE
 	select SYS_HAS_EARLY_PRINTK
@@ -1611,7 +1606,6 @@ config CPU_R4300
 	depends on SYS_HAS_CPU_R4300
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
-	select CPU_HAS_LOAD_STORE_LR
 	help
 	  MIPS Technologies R4300-series processors.
 
@@ -1907,6 +1901,10 @@ config SYS_HAS_CPU_MIPS64_R1
 config SYS_HAS_CPU_MIPS64_R2
 	bool
 
+config SYS_HAS_CPU_MIPS64_R5
+	bool
+	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
+
 config SYS_HAS_CPU_MIPS64_R6
 	bool
 	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
@@ -2065,7 +2063,7 @@ config CPU_SUPPORTS_ADDRWINCFG
 	bool
 config CPU_SUPPORTS_HUGEPAGES
 	bool
-	depends on !(32BIT && (ARCH_PHYS_ADDR_T_64BIT || EVA))
+	depends on !(32BIT && (PHYS_ADDR_T_64BIT || EVA))
 config MIPS_PGD_C0_CONTEXT
 	bool
 	depends on 64BIT
@@ -2116,6 +2114,16 @@ config MIPS_VA_BITS_48
 
 	  If unsure, say N.
 
+config ZBOOT_LOAD_ADDRESS
+	hex "Compressed kernel load address"
+	default 0xffffffff80400000 if BCM47XX
+	default 0x0
+	depends on SYS_SUPPORTS_ZBOOT
+	help
+	  The address to load compressed kernel, aka vmlinuz.
+
+	  This is only used if non-zero.
+
 choice
 	prompt "Kernel page size"
 	default PAGE_SIZE_4KB

arch/mips/Makefile

@@ -253,9 +253,7 @@ endif
 #
 # Board-dependent options and extra files
 #
-ifdef need-compiler
 include $(srctree)/arch/mips/Kbuild.platforms
-endif
 
 ifdef CONFIG_PHYSICAL_START
 load-y					= $(CONFIG_PHYSICAL_START)

arch/mips/alchemy/common/gpiolib.c

@@ -23,8 +23,6 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  *  Notes :
- *	This file must ONLY be built when CONFIG_GPIOLIB=y and
- *	 CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail!
  *	au1000 SoC have only one GPIO block : GPIO1
  *	Au1100, Au15x0, Au12x0 have a second one : GPIO2
  *	Au1300 is totally different: 1 block with up to 128 GPIOs

arch/mips/ath79/setup.c

@@ -34,15 +34,6 @@
 
 static char ath79_sys_type[ATH79_SYS_TYPE_LEN];
 
-static void ath79_restart(char *command)
-{
-	local_irq_disable();
-	ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
-	for (;;)
-		if (cpu_wait)
-			cpu_wait();
-}
-
 static void ath79_halt(void)
 {
 	while (1)
@@ -234,7 +225,6 @@ void __init plat_mem_setup(void)
 
 	detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
 
-	_machine_restart = ath79_restart;
 	_machine_halt = ath79_halt;
 	pm_power_off = ath79_halt;
 }

arch/mips/bcm47xx/Platform

@@ -4,4 +4,3 @@
 cflags-$(CONFIG_BCM47XX)	+=					\
 		-I$(srctree)/arch/mips/include/asm/mach-bcm47xx
 load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000
-zload-$(CONFIG_BCM47XX)		+= 0xffffffff80400000

arch/mips/bcm47xx/board.c

@@ -141,6 +141,7 @@ struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
 	{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
 	{{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
 	{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"},
 	{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
 	{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
 	{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
@@ -161,9 +162,12 @@ struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
 	{{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
 	{{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
 	{{BCM47XX_BOARD_NETGEAR_R6200_V1, "Netgear R6200 V1"}, "U12H192T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
@@ -345,7 +349,7 @@ void __init bcm47xx_board_detect(void)
 
 	board_detected = bcm47xx_board_get_nvram();
 	bcm47xx_board.board = board_detected->board;
-	strlcpy(bcm47xx_board.name, board_detected->name,
+	strscpy(bcm47xx_board.name, board_detected->name,
 		BCM47XX_BOARD_MAX_NAME);
 }
 

arch/mips/bcm47xx/buttons.c

@@ -26,6 +26,12 @@
 
 /* Asus */
 
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn10u[] __initconst = {
+	BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(21, KEY_RESTART),
+};
+
 static const struct gpio_keys_button
 bcm47xx_buttons_asus_rtn12[] __initconst = {
 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
@@ -276,6 +282,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __initconst = {
 	BCM47XX_GPIO_KEY(8, KEY_UNKNOWN),
 };
 
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = {
+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = {
+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
 static const struct gpio_keys_button
 bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
 	BCM47XX_GPIO_KEY(5, KEY_WIMAX),
@@ -391,6 +409,17 @@ bcm47xx_buttons_netgear_r6200_v1[] __initconst = {
 	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
 };
 
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_r6300_v1[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = {
+	BCM47XX_GPIO_KEY(12, KEY_RESTART),
+	BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON),
+};
+
 static const struct gpio_keys_button
 bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
@@ -478,6 +507,9 @@ int __init bcm47xx_buttons_register(void)
 	int err;
 
 	switch (board) {
+	case BCM47XX_BOARD_ASUS_RTN10U:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u);
+		break;
 	case BCM47XX_BOARD_ASUS_RTN12:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
 		break;
@@ -608,6 +640,12 @@ int __init bcm47xx_buttons_register(void)
 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
 		break;
+	case BCM47XX_BOARD_LINKSYS_WRT310NV2:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1);
+		break;
 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
 		break;
@@ -674,6 +712,12 @@ int __init bcm47xx_buttons_register(void)
 	case BCM47XX_BOARD_NETGEAR_R6200_V1:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6200_v1);
 		break;
+	case BCM47XX_BOARD_NETGEAR_R6300_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
+		break;
+	case BCM47XX_BOARD_NETGEAR_WN2500RP_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1);
+		break;
 	case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
 		break;

arch/mips/bcm47xx/leds.c

@@ -29,6 +29,14 @@
 
 /* Asus */
 
+static const struct gpio_led
+bcm47xx_leds_asus_rtn10u[] __initconst = {
+	BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
 static const struct gpio_led
 bcm47xx_leds_asus_rtn12[] __initconst = {
 	BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
@@ -313,6 +321,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initconst = {
 	BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
 };
 
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt320n_v1[] __initconst = {
+	BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
 static const struct gpio_led
 bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
 	BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -556,6 +571,9 @@ void __init bcm47xx_leds_register(void)
 	enum bcm47xx_board board = bcm47xx_board_get();
 
 	switch (board) {
+	case BCM47XX_BOARD_ASUS_RTN10U:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u);
+		break;
 	case BCM47XX_BOARD_ASUS_RTN12:
 		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
 		break;
@@ -689,6 +707,9 @@ void __init bcm47xx_leds_register(void)
 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
 		break;
+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1);
+		break;
 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
 		break;

arch/mips/bcm63xx/clk.c

@@ -387,6 +387,12 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
 unsigned long clk_get_rate(struct clk *clk)
 {
 	if (!clk)

arch/mips/bmips/dma.c

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2014 Kevin Cernekee <cernekee@gmail.com>
- */
+// SPDX-License-Identifier: GPL-2.0+
 
-#define pr_fmt(fmt)		"bmips-dma: " fmt
-
-#include <linux/device.h>
-#include <linux/dma-direction.h>
-#include <linux/dma-direct.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/printk.h>
-#include <linux/slab.h>
 #include <linux/types.h>
 #include <asm/bmips.h>
-
-/*
- * BCM338x has configurable address translation windows which allow the
- * peripherals' DMA addresses to be different from the Zephyr-visible
- * physical addresses.  e.g. usb_dma_addr = zephyr_pa ^ 0x08000000
- *
- * If the "brcm,ubus" node has a "dma-ranges" property we will enable this
- * translation globally using the provided information.  This implements a
- * very limited subset of "dma-ranges" support and it will probably be
- * replaced by a more generic version later.
- */
-
-struct bmips_dma_range {
-	u32			child_addr;
-	u32			parent_addr;
-	u32			size;
-};
-
-static struct bmips_dma_range *bmips_dma_ranges;
-
-#define FLUSH_RAC		0x100
-
-dma_addr_t phys_to_dma(struct device *dev, phys_addr_t pa)
-{
-	struct bmips_dma_range *r;
-
-	for (r = bmips_dma_ranges; r && r->size; r++) {
-		if (pa >= r->child_addr &&
-		    pa < (r->child_addr + r->size))
-			return pa - r->child_addr + r->parent_addr;
-	}
-	return pa;
-}
-
-phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dma_addr)
-{
-	struct bmips_dma_range *r;
-
-	for (r = bmips_dma_ranges; r && r->size; r++) {
-		if (dma_addr >= r->parent_addr &&
-		    dma_addr < (r->parent_addr + r->size))
-			return dma_addr - r->parent_addr + r->child_addr;
-	}
-	return dma_addr;
-}
+#include <asm/io.h>
 
 void arch_sync_dma_for_cpu_all(void)
 {
@@ -79,45 +19,3 @@ void arch_sync_dma_for_cpu_all(void)
 	__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
 	__raw_readl(cbr + BMIPS_RAC_CONFIG);
 }
-
-static int __init bmips_init_dma_ranges(void)
-{
-	struct device_node *np =
-		of_find_compatible_node(NULL, NULL, "brcm,ubus");
-	const __be32 *data;
-	struct bmips_dma_range *r;
-	int len;
-
-	if (!np)
-		return 0;
-
-	data = of_get_property(np, "dma-ranges", &len);
-	if (!data)
-		goto out_good;
-
-	len /= sizeof(*data) * 3;
-	if (!len)
-		goto out_bad;
-
-	/* add a dummy (zero) entry at the end as a sentinel */
-	bmips_dma_ranges = kcalloc(len + 1, sizeof(struct bmips_dma_range),
-				   GFP_KERNEL);
-	if (!bmips_dma_ranges)
-		goto out_bad;
-
-	for (r = bmips_dma_ranges; len; len--, r++) {
-		r->child_addr = be32_to_cpup(data++);
-		r->parent_addr = be32_to_cpup(data++);
-		r->size = be32_to_cpup(data++);
-	}
-
-out_good:
-	of_node_put(np);
-	return 0;
-
-out_bad:
-	pr_err("error parsing dma-ranges property\n");
-	of_node_put(np);
-	return -EINVAL;
-}
-arch_initcall(bmips_init_dma_ranges);

arch/mips/boot/compressed/Makefile

@@ -52,7 +52,7 @@ endif
 
 vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o
 
-vmlinuzobjs-$(CONFIG_KERNEL_ZSTD) += $(obj)/bswapdi.o $(obj)/ashldi3.o
+vmlinuzobjs-$(CONFIG_KERNEL_ZSTD) += $(obj)/bswapdi.o $(obj)/ashldi3.o $(obj)/clz_ctz.o
 
 targets := $(notdir $(vmlinuzobjs-y))
 
@@ -89,6 +89,10 @@ HOSTCFLAGS_calc_vmlinuz_load_addr.o += $(LINUXINCLUDE)
 # Calculate the load address of the compressed kernel image
 hostprogs := calc_vmlinuz_load_addr
 
+ifneq (0x0,$(CONFIG_ZBOOT_LOAD_ADDRESS))
+zload-y	= $(CONFIG_ZBOOT_LOAD_ADDRESS)
+endif
+
 ifneq ($(zload-y),)
 VMLINUZ_LOAD_ADDRESS := $(zload-y)
 else

arch/mips/boot/compressed/clz_ctz.c

+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/clz_ctz.c"

arch/mips/boot/dts/brcm/bcm7425.dtsi

@@ -584,4 +584,34 @@ shimphy@8000 {
 			};
 		};
 	};
+
+	pcie_0: pcie@8b20000 {
+		status = "disabled";
+		compatible = "brcm,bcm7425-pcie";
+
+		ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000
+			  0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000
+			  0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000
+			  0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>;
+
+		reg = <0x10410000 0x19310>;
+		aspm-no-l0s;
+		device_type = "pci";
+		msi-controller;
+		msi-parent = <&pcie_0>;
+		#address-cells = <0x3>;
+		#size-cells = <0x2>;
+		bus-range = <0x0 0xff>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		linux,pci-domain = <0x0>;
+
+		interrupt-parent = <&periph_intc>;
+		interrupts = <37>, <37>;
+		interrupt-names = "pcie", "msi";
+		#interrupt-cells = <0x1>;
+		interrupt-map = <0 0 0 1 &periph_intc 0x21
+				 0 0 0 1 &periph_intc 0x22
+				 0 0 0 1 &periph_intc 0x23
+				 0 0 0 1 &periph_intc 0x24>;
+	};
 };

arch/mips/boot/dts/brcm/bcm7435.dtsi

@@ -599,4 +599,34 @@ shimphy@8000 {
 			};
 		};
 	};
+
+	pcie_0: pcie@8b20000 {
+		status = "disabled";
+		compatible = "brcm,bcm7435-pcie";
+
+		ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000
+			  0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000
+			  0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000
+			  0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>;
+
+		reg = <0x10410000 0x19310>;
+		aspm-no-l0s;
+		device_type = "pci";
+		msi-controller;
+		msi-parent = <&pcie_0>;
+		#address-cells = <0x3>;
+		#size-cells = <0x2>;
+		bus-range = <0x0 0xff>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		linux,pci-domain = <0x0>;
+
+		interrupt-parent = <&periph_intc>;
+		interrupts = <39>, <39>;
+		interrupt-names = "pcie", "msi";
+		#interrupt-cells = <0x1>;
+		interrupt-map = <0 0 0 1 &periph_intc 0x23
+				 0 0 0 1 &periph_intc 0x24
+				 0 0 0 1 &periph_intc 0x25
+				 0 0 0 1 &periph_intc 0x26>;
+	};
 };

arch/mips/boot/dts/brcm/bcm97425svmb.dts

@@ -152,3 +152,12 @@ &mspi {
 &waketimer {
 	status = "okay";
 };
+
+&pcie_0 {
+	status = "okay";
+	/* 1GB Memc0, 1GB Memc1 */
+	brcm,scb-sizes = <0 0x40000000 0 0x40000000>;
+	dma-ranges = <0x43000000 0x00000000 0x00000000 0x00000000 0x0 0x10000000
+		      0x43000000 0x00000000 0x10000000 0x20000000 0x0 0x30000000
+		      0x43000000 0x00000000 0x40000000 0x90000000 0x0 0x40000000>;
+};

arch/mips/boot/dts/brcm/bcm97435svmb.dts

@@ -128,3 +128,12 @@ &mspi {
 &waketimer {
 	status = "okay";
 };
+
+&pcie_0 {
+	status = "okay";
+	/* 1GB Memc0, 1GB Memc1 */
+	brcm,scb-sizes = <0 0x40000000 0 0x40000000>;
+	dma-ranges = <0x43000000 0x00000000 0x00000000 0x00000000 0x0 0x10000000
+		      0x43000000 0x00000000 0x10000000 0x20000000 0x0 0x30000000
+		      0x43000000 0x00000000 0x40000000 0x90000000 0x0 0x40000000>;
+};

arch/mips/boot/dts/ingenic/ci20.dts

@@ -78,6 +78,18 @@ eth0_power: fixedregulator@0 {
 		enable-active-high;
 	};
 
+	hdmi_out: connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&dw_hdmi_out>;
+			};
+		};
+	};
+
 	ir: ir {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
@@ -102,6 +114,17 @@ otg_power: fixedregulator@2 {
 		gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
 		enable-active-high;
 	};
+
+	hdmi_power: fixedregulator@3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "hdmi_power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpa 25 0>;
+		enable-active-high;
+	};
 };
 
 &ext {
@@ -114,11 +137,12 @@ &cgu {
 	 * precision.
 	 */
 	assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>,
-			  <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>;
+			  <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>,
+			  <&cgu JZ4780_CLK_HDMI>;
 	assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>,
 				 <&cgu JZ4780_CLK_MPLL>,
 				 <&cgu JZ4780_CLK_SSIPLL>;
-	assigned-clock-rates = <48000000>, <0>, <54000000>;
+	assigned-clock-rates = <48000000>, <0>, <54000000>, <0>, <27000000>;
 };
 
 &tcu {
@@ -509,6 +533,12 @@ pins_i2c4: i2c4 {
 		bias-disable;
 	};
 
+	pins_hdmi_ddc: hdmi_ddc {
+		function = "hdmi-ddc";
+		groups = "hdmi-ddc";
+		bias-disable;
+	};
+
 	pins_nemc: nemc {
 		function = "nemc";
 		groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
@@ -539,3 +569,41 @@ pins_mmc1: mmc1 {
 		bias-disable;
 	};
 };
+
+&hdmi {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_hdmi_ddc>;
+
+	hdmi-5v-supply = <&hdmi_power>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dw_hdmi_in: endpoint {
+				remote-endpoint = <&lcd_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dw_hdmi_out: endpoint {
+				remote-endpoint = <&hdmi_con>;
+			};
+		};
+	};
+};
+
+&lcdc0 {
+	status = "okay";
+
+	port {
+		lcd_out: endpoint {
+			remote-endpoint = <&dw_hdmi_in>;
+		};
+	};
+};

arch/mips/boot/dts/ingenic/jz4725b.dtsi

@@ -321,7 +321,7 @@ udc: usb@13040000 {
 
 	lcd: lcd-controller@13050000 {
 		compatible = "ingenic,jz4725b-lcd";
-		reg = <0x13050000 0x1000>;
+		reg = <0x13050000 0x130>; /* tbc */
 
 		interrupt-parent = <&intc>;
 		interrupts = <31>;

arch/mips/boot/dts/ingenic/jz4740.dtsi

@@ -323,7 +323,7 @@ udc: usb@13040000 {
 
 	lcd: lcd-controller@13050000 {
 		compatible = "ingenic,jz4740-lcd";
-		reg = <0x13050000 0x1000>;
+		reg = <0x13050000 0x60>; /* LCDCMD1+4 */
 
 		interrupt-parent = <&intc>;
 		interrupts = <30>;

arch/mips/boot/dts/ingenic/jz4770.dtsi

@@ -399,7 +399,7 @@ gpu: gpu@13040000 {
 
 	lcd: lcd-controller@13050000 {
 		compatible = "ingenic,jz4770-lcd";
-		reg = <0x13050000 0x300>;
+		reg = <0x13050000 0x130>; /* tbc */
 
 		interrupt-parent = <&intc>;
 		interrupts = <31>;

arch/mips/boot/dts/ingenic/jz4780.dtsi

@@ -444,6 +444,46 @@ i2c4: i2c@10054000 {
 		status = "disabled";
 	};
 
+	hdmi: hdmi@10180000 {
+		compatible = "ingenic,jz4780-dw-hdmi";
+		reg = <0x10180000 0x8000>;
+		reg-io-width = <4>;
+
+		clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+		clock-names = "iahb", "isfr";
+
+		interrupt-parent = <&intc>;
+		interrupts = <3>;
+
+		status = "disabled";
+	};
+
+	lcdc0: lcdc0@13050000 {
+		compatible = "ingenic,jz4780-lcd";
+		reg = <0x13050000 0x1800>;
+
+		clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>;
+		clock-names = "lcd", "lcd_pclk";
+
+		interrupt-parent = <&intc>;
+		interrupts = <31>;
+
+		status = "disabled";
+	};
+
+	lcdc1: lcdc1@130a0000 {
+		compatible = "ingenic,jz4780-lcd";
+		reg = <0x130a0000 0x1800>;
+
+		clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>;
+		clock-names = "lcd", "lcd_pclk";
+
+		interrupt-parent = <&intc>;
+		interrupts = <23>;
+
+		status = "disabled";
+	};
+
 	nemc: nemc@13410000 {
 		compatible = "ingenic,jz4780-nemc", "simple-mfd";
 		reg = <0x13410000 0x10000>;

arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi

@@ -52,6 +52,11 @@ package0: bus@10000000 {
 			0 0x40000000 0 0x40000000 0 0x40000000
 			0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>;
 
+		pm: reset-controller@1fe07000 {
+			compatible = "loongson,ls2k-pm";
+			reg = <0 0x1fe07000 0 0x422>;
+		};
+
 		liointc0: interrupt-controller@1fe11400 {
 			compatible = "loongson,liointc-2.0";
 			reg = <0 0x1fe11400 0 0x40>,

arch/mips/cavium-octeon/octeon-platform.c

@@ -328,6 +328,7 @@ static int __init octeon_ehci_device_init(void)
 
 	pd->dev.platform_data = &octeon_ehci_pdata;
 	octeon_ehci_hw_start(&pd->dev);
+	put_device(&pd->dev);
 
 	return ret;
 }
@@ -391,6 +392,7 @@ static int __init octeon_ohci_device_init(void)
 
 	pd->dev.platform_data = &octeon_ohci_pdata;
 	octeon_ohci_hw_start(&pd->dev);
+	put_device(&pd->dev);
 
 	return ret;
 }

arch/mips/cavium-octeon/octeon-usb.c

@@ -537,6 +537,7 @@ static int __init dwc3_octeon_device_init(void)
 			devm_iounmap(&pdev->dev, base);
 			devm_release_mem_region(&pdev->dev, res->start,
 						resource_size(res));
+			put_device(&pdev->dev);
 		}
 	} while (node != NULL);
 

arch/mips/configs/ci20_defconfig

@@ -98,7 +98,13 @@ CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_CIR=m
 CONFIG_IR_GPIO_TX=m
 CONFIG_MEDIA_SUPPORT=m
+CONFIG_DRM=m
+CONFIG_DRM_INGENIC=m
+CONFIG_DRM_INGENIC_DW_HDMI=m
+CONFIG_DRM_DISPLAY_CONNECTOR=m
 # CONFIG_VGA_CONSOLE is not set
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_HID is not set
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y

arch/mips/configs/rbtx49xx_defconfig

@@ -10,9 +10,6 @@ CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MACH_TX49XX=y
 CONFIG_TOSHIBA_RBTX4927=y
-CONFIG_TOSHIBA_RBTX4938=y
-CONFIG_TOSHIBA_RBTX4939=y
-CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y
 # CONFIG_SECCOMP is not set
 CONFIG_PCI=y
 CONFIG_MODULES=y
@@ -38,7 +35,6 @@ CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RBTX4939=y
 CONFIG_MTD_RAW_NAND=m
 CONFIG_MTD_NAND_TXX9NDFMC=m
 CONFIG_BLK_DEV_LOOP=y

arch/mips/dec/prom/init.c

@@ -113,7 +113,7 @@ void __init prom_init(void)
 	if ((current_cpu_type() == CPU_R4000SC) ||
 	    (current_cpu_type() == CPU_R4400SC)) {
 		static const char r4k_msg[] __initconst =
-			"Please recompile with \"CONFIG_CPU_R4x00 = y\".\n";
+			"Please recompile with \"CONFIG_CPU_R4X00 = y\".\n";
 		printk(cpu_msg);
 		printk(r4k_msg);
 		dec_machine_halt();

arch/mips/generic/Platform

@@ -13,8 +13,7 @@ cflags-$(CONFIG_MACH_INGENIC_SOC)	+= -I$(srctree)/arch/mips/include/asm/mach-ing
 cflags-$(CONFIG_MIPS_GENERIC)	+= -I$(srctree)/arch/mips/include/asm/mach-generic
 
 load-$(CONFIG_MIPS_GENERIC)	+= 0xffffffff80100000
-zload-$(CONFIG_MIPS_GENERIC)	+= 0xffffffff81000000
-all-$(CONFIG_MIPS_GENERIC)	:= vmlinux.gz.itb
+all-$(CONFIG_MIPS_GENERIC)	+= vmlinux.gz.itb
 
 its-y					:= vmlinux.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= board-boston.its.S

arch/mips/generic/init.c

@@ -110,14 +110,15 @@ void __init plat_mem_setup(void)
 
 void __init device_tree_init(void)
 {
-	int err;
-
 	unflatten_and_copy_device_tree();
 	mips_cpc_probe();
 
-	err = register_cps_smp_ops();
-	if (err)
-		err = register_up_smp_ops();
+	if (!register_cps_smp_ops())
+		return;
+	if (!register_vsmp_smp_ops())
+		return;
+
+	register_up_smp_ops();
 }
 
 int __init apply_mips_fdt_fixups(void *fdt_out, size_t fdt_out_size,

arch/mips/include/asm/asm.h

@@ -19,6 +19,7 @@
 
 #include <asm/sgidefs.h>
 #include <asm/asm-eva.h>
+#include <asm/isa-rev.h>
 
 #ifndef __VDSO__
 /*
@@ -211,6 +212,8 @@ symbol		=	value
 #define LONG_SUB	sub
 #define LONG_SUBU	subu
 #define LONG_L		lw
+#define LONG_LL		ll
+#define LONG_SC		sc
 #define LONG_S		sw
 #define LONG_SP		swp
 #define LONG_SLL	sll
@@ -219,6 +222,8 @@ symbol		=	value
 #define LONG_SRLV	srlv
 #define LONG_SRA	sra
 #define LONG_SRAV	srav
+#define LONG_INS	ins
+#define LONG_EXT	ext
 
 #ifdef __ASSEMBLY__
 #define LONG		.word
@@ -236,6 +241,8 @@ symbol		=	value
 #define LONG_SUB	dsub
 #define LONG_SUBU	dsubu
 #define LONG_L		ld
+#define LONG_LL		lld
+#define LONG_SC		scd
 #define LONG_S		sd
 #define LONG_SP		sdp
 #define LONG_SLL	dsll
@@ -244,6 +251,8 @@ symbol		=	value
 #define LONG_SRLV	dsrlv
 #define LONG_SRA	dsra
 #define LONG_SRAV	dsrav
+#define LONG_INS	dins
+#define LONG_EXT	dext
 
 #ifdef __ASSEMBLY__
 #define LONG		.dword
@@ -320,6 +329,19 @@ symbol		=	value
 
 #define SSNOP		sll zero, zero, 1
 
+/*
+ * Using a branch-likely instruction to check the result of an sc instruction
+ * works around a bug present in R10000 CPUs prior to revision 3.0 that could
+ * cause ll-sc sequences to execute non-atomically.
+ */
+#ifdef CONFIG_WAR_R10000_LLSC
+# define SC_BEQZ	beqzl
+#elif MIPS_ISA_REV >= 6
+# define SC_BEQZ	beqzc
+#else
+# define SC_BEQZ	beqz
+#endif
+
 #ifdef CONFIG_SGI_IP28
 /* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
 #include <asm/cacheops.h>

arch/mips/include/asm/atomic.h

@@ -16,13 +16,12 @@
 
 #include <linux/irqflags.h>
 #include <linux/types.h>
+#include <asm/asm.h>
 #include <asm/barrier.h>
 #include <asm/compiler.h>
 #include <asm/cpu-features.h>
 #include <asm/cmpxchg.h>
-#include <asm/llsc.h>
 #include <asm/sync.h>
-#include <asm/war.h>
 
 #define ATOMIC_OPS(pfx, type)						\
 static __always_inline type arch_##pfx##_read(const pfx##_t *v)		\
@@ -74,7 +73,7 @@ static __inline__ void arch_##pfx##_##op(type i, pfx##_t * v)		\
 	"1:	" #ll "	%0, %1		# " #pfx "_" #op "	\n"	\
 	"	" #asm_op " %0, %2				\n"	\
 	"	" #sc "	%0, %1					\n"	\
-	"\t" __SC_BEQZ "%0, 1b					\n"	\
+	"\t" __stringify(SC_BEQZ) "	%0, 1b			\n"	\
 	"	.set	pop					\n"	\
 	: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter)		\
 	: "Ir" (i) : __LLSC_CLOBBER);					\
@@ -104,7 +103,7 @@ arch_##pfx##_##op##_return_relaxed(type i, pfx##_t * v)			\
 	"1:	" #ll "	%1, %2		# " #pfx "_" #op "_return\n"	\
 	"	" #asm_op " %0, %1, %3				\n"	\
 	"	" #sc "	%0, %2					\n"	\
-	"\t" __SC_BEQZ "%0, 1b					\n"	\
+	"\t" __stringify(SC_BEQZ) "	%0, 1b			\n"	\
 	"	" #asm_op " %0, %1, %3				\n"	\
 	"	.set	pop					\n"	\
 	: "=&r" (result), "=&r" (temp),					\
@@ -137,7 +136,7 @@ arch_##pfx##_fetch_##op##_relaxed(type i, pfx##_t * v)			\
 	"1:	" #ll "	%1, %2		# " #pfx "_fetch_" #op "\n"	\
 	"	" #asm_op " %0, %1, %3				\n"	\
 	"	" #sc "	%0, %2					\n"	\
-	"\t" __SC_BEQZ "%0, 1b					\n"	\
+	"\t" __stringify(SC_BEQZ) "	%0, 1b			\n"	\
 	"	.set	pop					\n"	\
 	"	move	%0, %1					\n"	\
 	: "=&r" (result), "=&r" (temp),					\
@@ -237,7 +236,7 @@ static __inline__ type arch_##pfx##_sub_if_positive(type i, pfx##_t * v)	\
 	"	.set	push					\n"	\
 	"	.set	" MIPS_ISA_LEVEL "			\n"	\
 	"	" #sc "	%1, %2					\n"	\
-	"	" __SC_BEQZ "%1, 1b				\n"	\
+	"	" __stringify(SC_BEQZ) "	%1, 1b		\n"	\
 	"2:	" __SYNC(full, loongson3_war) "			\n"	\
 	"	.set	pop					\n"	\
 	: "=&r" (result), "=&r" (temp),					\

arch/mips/include/asm/bitops.h

@@ -16,14 +16,12 @@
 #include <linux/bits.h>
 #include <linux/compiler.h>
 #include <linux/types.h>
+#include <asm/asm.h>
 #include <asm/barrier.h>
 #include <asm/byteorder.h>		/* sigh ... */
 #include <asm/compiler.h>
 #include <asm/cpu-features.h>
-#include <asm/isa-rev.h>
-#include <asm/llsc.h>
 #include <asm/sgidefs.h>
-#include <asm/war.h>
 
 #define __bit_op(mem, insn, inputs...) do {			\
 	unsigned long __temp;					\
@@ -32,10 +30,10 @@
 	"	.set		push			\n"	\
 	"	.set		" MIPS_ISA_LEVEL "	\n"	\
 	"	" __SYNC(full, loongson3_war) "		\n"	\
-	"1:	" __LL		"%0, %1			\n"	\
+	"1:	" __stringify(LONG_LL)	"	%0, %1	\n"	\
 	"	" insn		"			\n"	\
-	"	" __SC		"%0, %1			\n"	\
-	"	" __SC_BEQZ	"%0, 1b			\n"	\
+	"	" __stringify(LONG_SC)	"	%0, %1	\n"	\
+	"	" __stringify(SC_BEQZ)	"	%0, 1b	\n"	\
 	"	.set		pop			\n"	\
 	: "=&r"(__temp), "+" GCC_OFF_SMALL_ASM()(mem)		\
 	: inputs						\
@@ -49,10 +47,10 @@
 	"	.set		push			\n"	\
 	"	.set		" MIPS_ISA_LEVEL "	\n"	\
 	"	" __SYNC(full, loongson3_war) "		\n"	\
-	"1:	" __LL		ll_dst ", %2		\n"	\
+	"1:	" __stringify(LONG_LL) " "	ll_dst ", %2\n"	\
 	"	" insn		"			\n"	\
-	"	" __SC		"%1, %2			\n"	\
-	"	" __SC_BEQZ	"%1, 1b			\n"	\
+	"	" __stringify(LONG_SC)	"	%1, %2	\n"	\
+	"	" __stringify(SC_BEQZ)	"	%1, 1b	\n"	\
 	"	.set		pop			\n"	\
 	: "=&r"(__orig), "=&r"(__temp),				\
 	  "+" GCC_OFF_SMALL_ASM()(mem)				\
@@ -98,7 +96,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 	}
 
 	if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(bit) && (bit >= 16)) {
-		__bit_op(*m, __INS "%0, %3, %2, 1", "i"(bit), "r"(~0));
+		__bit_op(*m, __stringify(LONG_INS) " %0, %3, %2, 1", "i"(bit), "r"(~0));
 		return;
 	}
 
@@ -126,7 +124,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 	}
 
 	if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(bit)) {
-		__bit_op(*m, __INS "%0, $0, %2, 1", "i"(bit));
+		__bit_op(*m, __stringify(LONG_INS) " %0, $0, %2, 1", "i"(bit));
 		return;
 	}
 
@@ -234,8 +232,8 @@ static inline int test_and_clear_bit(unsigned long nr,
 		res = __mips_test_and_clear_bit(nr, addr);
 	} else if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(nr)) {
 		res = __test_bit_op(*m, "%1",
-				    __EXT "%0, %1, %3, 1;"
-				    __INS "%1, $0, %3, 1",
+				    __stringify(LONG_EXT) " %0, %1, %3, 1;"
+				    __stringify(LONG_INS) " %1, $0, %3, 1",
 				    "i"(bit));
 	} else {
 		orig = __test_bit_op(*m, "%0",

arch/mips/include/asm/cmpxchg.h

@@ -10,10 +10,9 @@
 
 #include <linux/bug.h>
 #include <linux/irqflags.h>
+#include <asm/asm.h>
 #include <asm/compiler.h>
-#include <asm/llsc.h>
 #include <asm/sync.h>
-#include <asm/war.h>
 
 /*
  * These functions doesn't exist, so if they are called you'll either:
@@ -48,7 +47,7 @@ extern unsigned long __xchg_called_with_bad_pointer(void)
 		"	move	$1, %z3				\n"	\
 		"	.set	" MIPS_ISA_ARCH_LEVEL "		\n"	\
 		"	" st "	$1, %1				\n"	\
-		"\t" __SC_BEQZ	"$1, 1b				\n"	\
+		"\t" __stringify(SC_BEQZ)	"	$1, 1b	\n"	\
 		"	.set	pop				\n"	\
 		: "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m)		\
 		: GCC_OFF_SMALL_ASM() (*m), "Jr" (val)			\
@@ -127,7 +126,7 @@ unsigned long __xchg(volatile void *ptr, unsigned long x, int size)
 		"	move	$1, %z4				\n"	\
 		"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"	\
 		"	" st "	$1, %1				\n"	\
-		"\t" __SC_BEQZ	"$1, 1b				\n"	\
+		"\t" __stringify(SC_BEQZ)	"	$1, 1b	\n"	\
 		"	.set	pop				\n"	\
 		"2:	" __SYNC(full, loongson3_war) "		\n"	\
 		: "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m)		\
@@ -282,7 +281,7 @@ static inline unsigned long __cmpxchg64(volatile void *ptr,
 	/* Attempt to store new at ptr */
 	"	scd	%L1, %2				\n"
 	/* If we failed, loop! */
-	"\t" __SC_BEQZ "%L1, 1b				\n"
+	"\t" __stringify(SC_BEQZ) "	%L1, 1b		\n"
 	"2:	" __SYNC(full, loongson3_war) "		\n"
 	"	.set	pop				\n"
 	: "=&r"(ret),

arch/mips/include/asm/kgdb.h

@@ -18,7 +18,7 @@
 #ifdef CONFIG_32BIT
 #define KGDB_GDB_REG_SIZE	32
 #define GDB_SIZEOF_REG		sizeof(u32)
-#else /* CONFIG_CPU_32BIT */
+#else /* CONFIG_32BIT */
 #define KGDB_GDB_REG_SIZE	64
 #define GDB_SIZEOF_REG		sizeof(u64)
 #endif

arch/mips/include/asm/kvm_host.h

@@ -20,6 +20,7 @@
 #include <linux/threads.h>
 #include <linux/spinlock.h>
 
+#include <asm/asm.h>
 #include <asm/inst.h>
 #include <asm/mipsregs.h>
 
@@ -379,9 +380,9 @@ static inline void _kvm_atomic_set_c0_guest_reg(unsigned long *reg,
 		__asm__ __volatile__(
 		"	.set	push				\n"
 		"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
-		"	" __LL "%0, %1				\n"
+		"	"__stringify(LONG_LL)	" %0, %1	\n"
 		"	or	%0, %2				\n"
-		"	" __SC	"%0, %1				\n"
+		"	"__stringify(LONG_SC)	" %0, %1	\n"
 		"	.set	pop				\n"
 		: "=&r" (temp), "+m" (*reg)
 		: "r" (val));
@@ -396,9 +397,9 @@ static inline void _kvm_atomic_clear_c0_guest_reg(unsigned long *reg,
 		__asm__ __volatile__(
 		"	.set	push				\n"
 		"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
-		"	" __LL "%0, %1				\n"
+		"	"__stringify(LONG_LL)	" %0, %1	\n"
 		"	and	%0, %2				\n"
-		"	" __SC	"%0, %1				\n"
+		"	"__stringify(LONG_SC)	" %0, %1	\n"
 		"	.set	pop				\n"
 		: "=&r" (temp), "+m" (*reg)
 		: "r" (~val));
@@ -414,10 +415,10 @@ static inline void _kvm_atomic_change_c0_guest_reg(unsigned long *reg,
 		__asm__ __volatile__(
 		"	.set	push				\n"
 		"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
-		"	" __LL "%0, %1				\n"
+		"	"__stringify(LONG_LL)	" %0, %1	\n"
 		"	and	%0, %2				\n"
 		"	or	%0, %3				\n"
-		"	" __SC	"%0, %1				\n"
+		"	"__stringify(LONG_SC)	" %0, %1	\n"
 		"	.set	pop				\n"
 		: "=&r" (temp), "+m" (*reg)
 		: "r" (~change), "r" (val & change));

arch/mips/include/asm/llsc.h

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Macros for 32/64-bit neutral inline assembler
- */
-
-#ifndef __ASM_LLSC_H
-#define __ASM_LLSC_H
-
-#include <asm/isa-rev.h>
-
-#if _MIPS_SZLONG == 32
-#define __LL		"ll	"
-#define __SC		"sc	"
-#define __INS		"ins	"
-#define __EXT		"ext	"
-#elif _MIPS_SZLONG == 64
-#define __LL		"lld	"
-#define __SC		"scd	"
-#define __INS		"dins	"
-#define __EXT		"dext	"
-#endif
-
-/*
- * Using a branch-likely instruction to check the result of an sc instruction
- * works around a bug present in R10000 CPUs prior to revision 3.0 that could
- * cause ll-sc sequences to execute non-atomically.
- */
-#ifdef CONFIG_WAR_R10000_LLSC
-# define __SC_BEQZ "beqzl	"
-#elif MIPS_ISA_REV >= 6
-# define __SC_BEQZ "beqzc	"
-#else
-# define __SC_BEQZ "beqz	"
-#endif
-
-#endif /* __ASM_LLSC_H  */

arch/mips/include/asm/local.h

@@ -5,9 +5,9 @@
 #include <linux/percpu.h>
 #include <linux/bitops.h>
 #include <linux/atomic.h>
+#include <asm/asm.h>
 #include <asm/cmpxchg.h>
 #include <asm/compiler.h>
-#include <asm/war.h>
 
 typedef struct
 {
@@ -31,34 +31,18 @@ static __inline__ long local_add_return(long i, local_t * l)
 {
 	unsigned long result;
 
-	if (kernel_uses_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) {
-		unsigned long temp;
-
-		__asm__ __volatile__(
-		"	.set	push					\n"
-		"	.set	arch=r4000				\n"
-			__SYNC(full, loongson3_war) "			\n"
-		"1:"	__LL	"%1, %2		# local_add_return	\n"
-		"	addu	%0, %1, %3				\n"
-			__SC	"%0, %2					\n"
-		"	beqzl	%0, 1b					\n"
-		"	addu	%0, %1, %3				\n"
-		"	.set	pop					\n"
-		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
-		: "Ir" (i), "m" (l->a.counter)
-		: "memory");
-	} else if (kernel_uses_llsc) {
+	if (kernel_uses_llsc) {
 		unsigned long temp;
 
 		__asm__ __volatile__(
 		"	.set	push					\n"
 		"	.set	"MIPS_ISA_ARCH_LEVEL"			\n"
-			__SYNC(full, loongson3_war) "			\n"
-		"1:"	__LL	"%1, %2		# local_add_return	\n"
-		"	addu	%0, %1, %3				\n"
-			__SC	"%0, %2					\n"
-		"	beqz	%0, 1b					\n"
-		"	addu	%0, %1, %3				\n"
+			__SYNC(full, loongson3_war) "                   \n"
+		"1:"	__stringify(LONG_LL)	"	%1, %2		\n"
+			__stringify(LONG_ADDU)	"	%0, %1, %3	\n"
+			__stringify(LONG_SC)	"	%0, %2		\n"
+			__stringify(SC_BEQZ)	"	%0, 1b		\n"
+			__stringify(LONG_ADDU)	"	%0, %1, %3	\n"
 		"	.set	pop					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
 		: "Ir" (i), "m" (l->a.counter)
@@ -80,34 +64,19 @@ static __inline__ long local_sub_return(long i, local_t * l)
 {
 	unsigned long result;
 
-	if (kernel_uses_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) {
-		unsigned long temp;
-
-		__asm__ __volatile__(
-		"	.set	push					\n"
-		"	.set	arch=r4000				\n"
-			__SYNC(full, loongson3_war) "			\n"
-		"1:"	__LL	"%1, %2		# local_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
-			__SC	"%0, %2					\n"
-		"	beqzl	%0, 1b					\n"
-		"	subu	%0, %1, %3				\n"
-		"	.set	pop					\n"
-		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
-		: "Ir" (i), "m" (l->a.counter)
-		: "memory");
-	} else if (kernel_uses_llsc) {
+	if (kernel_uses_llsc) {
 		unsigned long temp;
 
 		__asm__ __volatile__(
 		"	.set	push					\n"
 		"	.set	"MIPS_ISA_ARCH_LEVEL"			\n"
-			__SYNC(full, loongson3_war) "			\n"
-		"1:"	__LL	"%1, %2		# local_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
-			__SC	"%0, %2					\n"
-		"	beqz	%0, 1b					\n"
-		"	subu	%0, %1, %3				\n"
+			__SYNC(full, loongson3_war) "                   \n"
+		"1:"	__stringify(LONG_LL)	"	%1, %2		\n"
+			__stringify(LONG_SUBU)	"	%0, %1, %3	\n"
+			__stringify(LONG_SUBU)	"	%0, %1, %3	\n"
+			__stringify(LONG_SC)	"	%0, %2		\n"
+			__stringify(SC_BEQZ)	"	%0, 1b		\n"
+			__stringify(LONG_SUBU)	"	%0, %1, %3	\n"
 		"	.set	pop					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
 		: "Ir" (i), "m" (l->a.counter)

arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h

@@ -72,6 +72,7 @@ enum bcm47xx_board {
 	BCM47XX_BOARD_LINKSYS_WRT300NV11,
 	BCM47XX_BOARD_LINKSYS_WRT310NV1,
 	BCM47XX_BOARD_LINKSYS_WRT310NV2,
+	BCM47XX_BOARD_LINKSYS_WRT320N_V1,
 	BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
 	BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
 	BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
@@ -99,9 +100,12 @@ enum bcm47xx_board {
 	BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
 
 	BCM47XX_BOARD_NETGEAR_R6200_V1,
+	BCM47XX_BOARD_NETGEAR_R6300_V1,
 	BCM47XX_BOARD_NETGEAR_WGR614V8,
 	BCM47XX_BOARD_NETGEAR_WGR614V9,
 	BCM47XX_BOARD_NETGEAR_WGR614_V10,
+	BCM47XX_BOARD_NETGEAR_WN2500RP_V1,
+	BCM47XX_BOARD_NETGEAR_WN2500RP_V2,
 	BCM47XX_BOARD_NETGEAR_WNDR3300,
 	BCM47XX_BOARD_NETGEAR_WNDR3400V1,
 	BCM47XX_BOARD_NETGEAR_WNDR3400V2,

arch/mips/include/asm/mach-loongson64/kernel-entry-init.h

@@ -32,7 +32,7 @@
 	nop
 	/* Loongson-3A R2/R3 */
 	andi	t0, (PRID_IMP_MASK | PRID_REV_MASK)
-	slti	t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+	slti	t0, t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
 	bnez	t0, 2f
 	nop
 1:
@@ -63,7 +63,7 @@
 	nop
 	/* Loongson-3A R2/R3 */
 	andi	t0, (PRID_IMP_MASK | PRID_REV_MASK)
-	slti	t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+	slti	t0, t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
 	bnez	t0, 2f
 	nop
 1:

arch/mips/include/asm/mach-tx49xx/mangle-port.h

@@ -9,16 +9,8 @@
 
 #define ioswabb(a, x)		(x)
 #define __mem_ioswabb(a, x)	(x)
-#if defined(CONFIG_TOSHIBA_RBTX4939) && \
-	IS_ENABLED(CONFIG_SMC91X) && \
-	defined(__BIG_ENDIAN)
-#define NEEDS_TXX9_IOSWABW
-extern u16 (*ioswabw)(volatile u16 *a, u16 x);
-extern u16 (*__mem_ioswabw)(volatile u16 *a, u16 x);
-#else
 #define ioswabw(a, x)		le16_to_cpu((__force __le16)(x))
 #define __mem_ioswabw(a, x)	(x)
-#endif
 #define ioswabl(a, x)		le32_to_cpu((__force __le32)(x))
 #define __mem_ioswabl(a, x)	(x)
 #define ioswabq(a, x)		le64_to_cpu((__force __le64)(x))

arch/mips/include/asm/mips-cps.h

@@ -7,6 +7,7 @@
 #ifndef __MIPS_ASM_MIPS_CPS_H__
 #define __MIPS_ASM_MIPS_CPS_H__
 
+#include <linux/bitfield.h>
 #include <linux/io.h>
 #include <linux/types.h>
 
@@ -112,14 +113,10 @@ static inline void clear_##unit##_##name(uint##sz##_t val)		\
  */
 static inline unsigned int mips_cps_numclusters(void)
 {
-	unsigned int num_clusters;
-
 	if (mips_cm_revision() < CM_REV_CM3_5)
 		return 1;
 
-	num_clusters = read_gcr_config() & CM_GCR_CONFIG_NUM_CLUSTERS;
-	num_clusters >>= __ffs(CM_GCR_CONFIG_NUM_CLUSTERS);
-	return num_clusters;
+	return FIELD_GET(CM_GCR_CONFIG_NUM_CLUSTERS, read_gcr_config());
 }
 
 /**
@@ -169,7 +166,8 @@ static inline unsigned int mips_cps_numcores(unsigned int cluster)
 		return 0;
 
 	/* Add one before masking to handle 0xff indicating no cores */
-	return (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES;
+	return FIELD_GET(CM_GCR_CONFIG_PCORES,
+			 mips_cps_cluster_config(cluster) + 1);
 }
 
 /**
@@ -181,14 +179,11 @@ static inline unsigned int mips_cps_numcores(unsigned int cluster)
  */
 static inline unsigned int mips_cps_numiocu(unsigned int cluster)
 {
-	unsigned int num_iocu;
-
 	if (!mips_cm_present())
 		return 0;
 
-	num_iocu = mips_cps_cluster_config(cluster) & CM_GCR_CONFIG_NUMIOCU;
-	num_iocu >>= __ffs(CM_GCR_CONFIG_NUMIOCU);
-	return num_iocu;
+	return FIELD_GET(CM_GCR_CONFIG_NUMIOCU,
+			 mips_cps_cluster_config(cluster));
 }
 
 /**
@@ -230,7 +225,7 @@ static inline unsigned int mips_cps_numvps(unsigned int cluster, unsigned int co
 
 	mips_cm_unlock_other();
 
-	return (cfg + 1) & CM_GCR_Cx_CONFIG_PVPE;
+	return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, cfg + 1);
 }
 
 #endif /* __MIPS_ASM_MIPS_CPS_H__ */

arch/mips/include/asm/octeon/cvmx-bootinfo.h

@@ -318,7 +318,7 @@ enum cvmx_chip_types_enum {
 
 /* Functions to return string based on type */
 #define ENUM_BRD_TYPE_CASE(x) \
-	case x: return(#x + 16);	/* Skip CVMX_BOARD_TYPE_ */
+	case x: return (&#x[16]);	/* Skip CVMX_BOARD_TYPE_ */
 static inline const char *cvmx_board_type_to_string(enum
 						    cvmx_board_types_enum type)
 {
@@ -410,7 +410,7 @@ static inline const char *cvmx_board_type_to_string(enum
 }
 
 #define ENUM_CHIP_TYPE_CASE(x) \
-	case x: return(#x + 15);	/* Skip CVMX_CHIP_TYPE */
+	case x: return (&#x[15]);	/* Skip CVMX_CHIP_TYPE */
 static inline const char *cvmx_chip_type_to_string(enum
 						   cvmx_chip_types_enum type)
 {

arch/mips/include/asm/sibyte/sb1250_mc.h

@@ -484,7 +484,7 @@
 
 
 /*
- * Bank Address Address Bits Register (Table 6-22)
+ * Bank Address Bits Register (Table 6-22)
  */
 
 #define S_MC_BA_RESERVED	    0

arch/mips/include/asm/smp-ops.h

@@ -101,6 +101,9 @@ static inline int register_vsmp_smp_ops(void)
 #ifdef CONFIG_MIPS_MT_SMP
 	extern const struct plat_smp_ops vsmp_smp_ops;
 
+	if (!cpu_has_mipsmt)
+		return -ENODEV;
+
 	register_smp_ops(&vsmp_smp_ops);
 
 	return 0;

arch/mips/include/asm/txx9/boards.h

@@ -6,9 +6,3 @@ BOARD_VEC(jmr3927_vec)
 BOARD_VEC(rbtx4927_vec)
 BOARD_VEC(rbtx4937_vec)
 #endif
-#ifdef CONFIG_TOSHIBA_RBTX4938
-BOARD_VEC(rbtx4938_vec)
-#endif
-#ifdef CONFIG_TOSHIBA_RBTX4939
-BOARD_VEC(rbtx4939_vec)
-#endif

arch/mips/include/asm/txx9/rbtx4938.h

-/*
- * Definitions for TX4937/TX4938
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#ifndef __ASM_TXX9_RBTX4938_H
-#define __ASM_TXX9_RBTX4938_H
-
-#include <asm/addrspace.h>
-#include <asm/txx9irq.h>
-#include <asm/txx9/tx4938.h>
-
-/* Address map */
-#define RBTX4938_FPGA_REG_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000000)
-#define RBTX4938_FPGA_REV_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000002)
-#define RBTX4938_CONFIG1_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000004)
-#define RBTX4938_CONFIG2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000006)
-#define RBTX4938_CONFIG3_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000008)
-#define RBTX4938_LED_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001000)
-#define RBTX4938_DIPSW_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001002)
-#define RBTX4938_BDIPSW_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001004)
-#define RBTX4938_IMASK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002000)
-#define RBTX4938_IMASK2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002002)
-#define RBTX4938_INTPOL_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002004)
-#define RBTX4938_ISTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002006)
-#define RBTX4938_ISTAT2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002008)
-#define RBTX4938_IMSTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000200a)
-#define RBTX4938_IMSTAT2_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000200c)
-#define RBTX4938_SOFTINT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00003000)
-#define RBTX4938_PIOSEL_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005000)
-#define RBTX4938_SPICS_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005002)
-#define RBTX4938_SFPWR_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005008)
-#define RBTX4938_SFVOL_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000500a)
-#define RBTX4938_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007000)
-#define RBTX4938_SOFTRESETLOCK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007002)
-#define RBTX4938_PCIRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007004)
-#define RBTX4938_ETHER_BASE	(IO_BASE + TXX9_CE(2) + 0x00020000)
-
-/* Ethernet port address (Jumperless Mode (W12:Open)) */
-#define RBTX4938_ETHER_ADDR	(RBTX4938_ETHER_BASE + 0x280)
-
-/* bits for ISTAT/IMASK/IMSTAT */
-#define RBTX4938_INTB_PCID	0
-#define RBTX4938_INTB_PCIC	1
-#define RBTX4938_INTB_PCIB	2
-#define RBTX4938_INTB_PCIA	3
-#define RBTX4938_INTB_RTC	4
-#define RBTX4938_INTB_ATA	5
-#define RBTX4938_INTB_MODEM	6
-#define RBTX4938_INTB_SWINT	7
-#define RBTX4938_INTF_PCID	(1 << RBTX4938_INTB_PCID)
-#define RBTX4938_INTF_PCIC	(1 << RBTX4938_INTB_PCIC)
-#define RBTX4938_INTF_PCIB	(1 << RBTX4938_INTB_PCIB)
-#define RBTX4938_INTF_PCIA	(1 << RBTX4938_INTB_PCIA)
-#define RBTX4938_INTF_RTC	(1 << RBTX4938_INTB_RTC)
-#define RBTX4938_INTF_ATA	(1 << RBTX4938_INTB_ATA)
-#define RBTX4938_INTF_MODEM	(1 << RBTX4938_INTB_MODEM)
-#define RBTX4938_INTF_SWINT	(1 << RBTX4938_INTB_SWINT)
-
-#define rbtx4938_fpga_rev_addr	((__u8 __iomem *)RBTX4938_FPGA_REV_ADDR)
-#define rbtx4938_led_addr	((__u8 __iomem *)RBTX4938_LED_ADDR)
-#define rbtx4938_dipsw_addr	((__u8 __iomem *)RBTX4938_DIPSW_ADDR)
-#define rbtx4938_bdipsw_addr	((__u8 __iomem *)RBTX4938_BDIPSW_ADDR)
-#define rbtx4938_imask_addr	((__u8 __iomem *)RBTX4938_IMASK_ADDR)
-#define rbtx4938_imask2_addr	((__u8 __iomem *)RBTX4938_IMASK2_ADDR)
-#define rbtx4938_intpol_addr	((__u8 __iomem *)RBTX4938_INTPOL_ADDR)
-#define rbtx4938_istat_addr	((__u8 __iomem *)RBTX4938_ISTAT_ADDR)
-#define rbtx4938_istat2_addr	((__u8 __iomem *)RBTX4938_ISTAT2_ADDR)
-#define rbtx4938_imstat_addr	((__u8 __iomem *)RBTX4938_IMSTAT_ADDR)
-#define rbtx4938_imstat2_addr	((__u8 __iomem *)RBTX4938_IMSTAT2_ADDR)
-#define rbtx4938_softint_addr	((__u8 __iomem *)RBTX4938_SOFTINT_ADDR)
-#define rbtx4938_piosel_addr	((__u8 __iomem *)RBTX4938_PIOSEL_ADDR)
-#define rbtx4938_spics_addr	((__u8 __iomem *)RBTX4938_SPICS_ADDR)
-#define rbtx4938_sfpwr_addr	((__u8 __iomem *)RBTX4938_SFPWR_ADDR)
-#define rbtx4938_sfvol_addr	((__u8 __iomem *)RBTX4938_SFVOL_ADDR)
-#define rbtx4938_softreset_addr ((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR)
-#define rbtx4938_softresetlock_addr	\
-				((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR)
-#define rbtx4938_pcireset_addr	((__u8 __iomem *)RBTX4938_PCIRESET_ADDR)
-
-/*
- * IRQ mappings
- */
-
-#define RBTX4938_SOFT_INT0	0	/* not used */
-#define RBTX4938_SOFT_INT1	1	/* not used */
-#define RBTX4938_IRC_INT	2
-#define RBTX4938_TIMER_INT	7
-
-/* These are the virtual IRQ numbers, we divide all IRQ's into
- * 'spaces', the 'space' determines where and how to enable/disable
- * that particular IRQ on an RBTX4938 machine.	Add new 'spaces' as new
- * IRQ hardware is supported.
- */
-#define RBTX4938_NR_IRQ_IOC	8
-
-#define RBTX4938_IRQ_IRC	TXX9_IRQ_BASE
-#define RBTX4938_IRQ_IOC	(TXX9_IRQ_BASE + TX4938_NUM_IR)
-#define RBTX4938_IRQ_END	(RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC)
-
-#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR)
-#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR)
-#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n))
-#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n))
-#define RBTX4938_IRQ_IRC_DMA(ch, n)	(RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch, n))
-#define RBTX4938_IRQ_IRC_PIO	(RBTX4938_IRQ_IRC + TX4938_IR_PIO)
-#define RBTX4938_IRQ_IRC_PDMAC	(RBTX4938_IRQ_IRC + TX4938_IR_PDMAC)
-#define RBTX4938_IRQ_IRC_PCIC	(RBTX4938_IRQ_IRC + TX4938_IR_PCIC)
-#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n))
-#define RBTX4938_IRQ_IRC_NDFMC	(RBTX4938_IRQ_IRC + TX4938_IR_NDFMC)
-#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR)
-#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME)
-#define RBTX4938_IRQ_IRC_ACLC	(RBTX4938_IRQ_IRC + TX4938_IR_ACLC)
-#define RBTX4938_IRQ_IRC_ACLCPME	(RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME)
-#define RBTX4938_IRQ_IRC_PCIC1	(RBTX4938_IRQ_IRC + TX4938_IR_PCIC1)
-#define RBTX4938_IRQ_IRC_SPI	(RBTX4938_IRQ_IRC + TX4938_IR_SPI)
-#define RBTX4938_IRQ_IOC_PCID	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCID)
-#define RBTX4938_IRQ_IOC_PCIC	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIC)
-#define RBTX4938_IRQ_IOC_PCIB	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIB)
-#define RBTX4938_IRQ_IOC_PCIA	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIA)
-#define RBTX4938_IRQ_IOC_RTC	(RBTX4938_IRQ_IOC + RBTX4938_INTB_RTC)
-#define RBTX4938_IRQ_IOC_ATA	(RBTX4938_IRQ_IOC + RBTX4938_INTB_ATA)
-#define RBTX4938_IRQ_IOC_MODEM	(RBTX4938_IRQ_IOC + RBTX4938_INTB_MODEM)
-#define RBTX4938_IRQ_IOC_SWINT	(RBTX4938_IRQ_IOC + RBTX4938_INTB_SWINT)
-
-
-/* IOC (PCI, etc) */
-#define RBTX4938_IRQ_IOCINT	(TXX9_IRQ_BASE + TX4938_IR_INT(0))
-/* Onboard 10M Ether */
-#define RBTX4938_IRQ_ETHER	(TXX9_IRQ_BASE + TX4938_IR_INT(1))
-
-#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base)
-#define RBTX4938_RTL_8019_IRQ  (RBTX4938_IRQ_ETHER)
-
-void rbtx4938_prom_init(void);
-void rbtx4938_irq_setup(void);
-struct pci_dev;
-int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-
-#endif /* __ASM_TXX9_RBTX4938_H */

arch/mips/include/asm/txx9/rbtx4939.h

-/*
- * Definitions for RBTX4939
- *
- * (C) Copyright TOSHIBA CORPORATION 2005-2006
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_TXX9_RBTX4939_H
-#define __ASM_TXX9_RBTX4939_H
-
-#include <asm/addrspace.h>
-#include <asm/txx9irq.h>
-#include <asm/txx9/generic.h>
-#include <asm/txx9/tx4939.h>
-
-/* Address map */
-#define RBTX4939_IOC_REG_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000000)
-#define RBTX4939_BOARD_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000)
-#define RBTX4939_IOC_REV_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000002)
-#define RBTX4939_CONFIG1_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000004)
-#define RBTX4939_CONFIG2_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000006)
-#define RBTX4939_CONFIG3_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000008)
-#define RBTX4939_CONFIG4_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000000a)
-#define RBTX4939_USTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00001000)
-#define RBTX4939_UDIPSW_ADDR	(IO_BASE + TXX9_CE(1) + 0x00001002)
-#define RBTX4939_BDIPSW_ADDR	(IO_BASE + TXX9_CE(1) + 0x00001004)
-#define RBTX4939_IEN_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002000)
-#define RBTX4939_IPOL_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002002)
-#define RBTX4939_IFAC1_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002004)
-#define RBTX4939_IFAC2_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002006)
-#define RBTX4939_SOFTINT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00003000)
-#define RBTX4939_ISASTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004000)
-#define RBTX4939_PCISTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004002)
-#define RBTX4939_ROME_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004004)
-#define RBTX4939_SPICS_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004006)
-#define RBTX4939_AUDI_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004008)
-#define RBTX4939_ISAGPIO_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000400a)
-#define RBTX4939_PE1_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005000)
-#define RBTX4939_PE2_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005002)
-#define RBTX4939_PE3_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005004)
-#define RBTX4939_VP_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005006)
-#define RBTX4939_VPRESET_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005008)
-#define RBTX4939_VPSOUT_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000500a)
-#define RBTX4939_VPSIN_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000500c)
-#define RBTX4939_7SEG_ADDR(s, ch)	\
-	(IO_BASE + TXX9_CE(1) + 0x00006000 + (s) * 16 + ((ch) & 3) * 2)
-#define RBTX4939_SOFTRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00007000)
-#define RBTX4939_RESETEN_ADDR	(IO_BASE + TXX9_CE(1) + 0x00007002)
-#define RBTX4939_RESETSTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00007004)
-#define RBTX4939_ETHER_BASE	(IO_BASE + TXX9_CE(1) + 0x00020000)
-
-/* Ethernet port address */
-#define RBTX4939_ETHER_ADDR	(RBTX4939_ETHER_BASE + 0x300)
-
-/* bits for IEN/IPOL/IFAC */
-#define RBTX4938_INTB_ISA0	0
-#define RBTX4938_INTB_ISA11	1
-#define RBTX4938_INTB_ISA12	2
-#define RBTX4938_INTB_ISA15	3
-#define RBTX4938_INTB_I2S	4
-#define RBTX4938_INTB_SW	5
-#define RBTX4938_INTF_ISA0	(1 << RBTX4938_INTB_ISA0)
-#define RBTX4938_INTF_ISA11	(1 << RBTX4938_INTB_ISA11)
-#define RBTX4938_INTF_ISA12	(1 << RBTX4938_INTB_ISA12)
-#define RBTX4938_INTF_ISA15	(1 << RBTX4938_INTB_ISA15)
-#define RBTX4938_INTF_I2S	(1 << RBTX4938_INTB_I2S)
-#define RBTX4938_INTF_SW	(1 << RBTX4938_INTB_SW)
-
-/* bits for PE1,PE2,PE3 */
-#define RBTX4939_PE1_ATA(ch)	(0x01 << (ch))
-#define RBTX4939_PE1_RMII(ch)	(0x04 << (ch))
-#define RBTX4939_PE2_SIO0	0x01
-#define RBTX4939_PE2_SIO2	0x02
-#define RBTX4939_PE2_SIO3	0x04
-#define RBTX4939_PE2_CIR	0x08
-#define RBTX4939_PE2_SPI	0x10
-#define RBTX4939_PE2_GPIO	0x20
-#define RBTX4939_PE3_VP 0x01
-#define RBTX4939_PE3_VP_P	0x02
-#define RBTX4939_PE3_VP_S	0x04
-
-#define rbtx4939_board_rev_addr ((u8 __iomem *)RBTX4939_BOARD_REV_ADDR)
-#define rbtx4939_ioc_rev_addr	((u8 __iomem *)RBTX4939_IOC_REV_ADDR)
-#define rbtx4939_config1_addr	((u8 __iomem *)RBTX4939_CONFIG1_ADDR)
-#define rbtx4939_config2_addr	((u8 __iomem *)RBTX4939_CONFIG2_ADDR)
-#define rbtx4939_config3_addr	((u8 __iomem *)RBTX4939_CONFIG3_ADDR)
-#define rbtx4939_config4_addr	((u8 __iomem *)RBTX4939_CONFIG4_ADDR)
-#define rbtx4939_ustat_addr	((u8 __iomem *)RBTX4939_USTAT_ADDR)
-#define rbtx4939_udipsw_addr	((u8 __iomem *)RBTX4939_UDIPSW_ADDR)
-#define rbtx4939_bdipsw_addr	((u8 __iomem *)RBTX4939_BDIPSW_ADDR)
-#define rbtx4939_ien_addr	((u8 __iomem *)RBTX4939_IEN_ADDR)
-#define rbtx4939_ipol_addr	((u8 __iomem *)RBTX4939_IPOL_ADDR)
-#define rbtx4939_ifac1_addr	((u8 __iomem *)RBTX4939_IFAC1_ADDR)
-#define rbtx4939_ifac2_addr	((u8 __iomem *)RBTX4939_IFAC2_ADDR)
-#define rbtx4939_softint_addr	((u8 __iomem *)RBTX4939_SOFTINT_ADDR)
-#define rbtx4939_isastat_addr	((u8 __iomem *)RBTX4939_ISASTAT_ADDR)
-#define rbtx4939_pcistat_addr	((u8 __iomem *)RBTX4939_PCISTAT_ADDR)
-#define rbtx4939_rome_addr	((u8 __iomem *)RBTX4939_ROME_ADDR)
-#define rbtx4939_spics_addr	((u8 __iomem *)RBTX4939_SPICS_ADDR)
-#define rbtx4939_audi_addr	((u8 __iomem *)RBTX4939_AUDI_ADDR)
-#define rbtx4939_isagpio_addr	((u8 __iomem *)RBTX4939_ISAGPIO_ADDR)
-#define rbtx4939_pe1_addr	((u8 __iomem *)RBTX4939_PE1_ADDR)
-#define rbtx4939_pe2_addr	((u8 __iomem *)RBTX4939_PE2_ADDR)
-#define rbtx4939_pe3_addr	((u8 __iomem *)RBTX4939_PE3_ADDR)
-#define rbtx4939_vp_addr	((u8 __iomem *)RBTX4939_VP_ADDR)
-#define rbtx4939_vpreset_addr	((u8 __iomem *)RBTX4939_VPRESET_ADDR)
-#define rbtx4939_vpsout_addr	((u8 __iomem *)RBTX4939_VPSOUT_ADDR)
-#define rbtx4939_vpsin_addr	((u8 __iomem *)RBTX4939_VPSIN_ADDR)
-#define rbtx4939_7seg_addr(s, ch) \
-				((u8 __iomem *)RBTX4939_7SEG_ADDR(s, ch))
-#define rbtx4939_softreset_addr ((u8 __iomem *)RBTX4939_SOFTRESET_ADDR)
-#define rbtx4939_reseten_addr	((u8 __iomem *)RBTX4939_RESETEN_ADDR)
-#define rbtx4939_resetstat_addr ((u8 __iomem *)RBTX4939_RESETSTAT_ADDR)
-
-/*
- * IRQ mappings
- */
-#define RBTX4939_NR_IRQ_IOC	8
-
-#define RBTX4939_IRQ_IOC	(TXX9_IRQ_BASE + TX4939_NUM_IR)
-#define RBTX4939_IRQ_END	(RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC)
-
-/* IOC (ISA, etc) */
-#define RBTX4939_IRQ_IOCINT	(TXX9_IRQ_BASE + TX4939_IR_INT(0))
-/* Onboard 10M Ether */
-#define RBTX4939_IRQ_ETHER	(TXX9_IRQ_BASE + TX4939_IR_INT(1))
-
-void rbtx4939_prom_init(void);
-void rbtx4939_irq_setup(void);
-
-struct mtd_partition;
-struct map_info;
-struct rbtx4939_flash_data {
-	unsigned int width;
-	unsigned int nr_parts;
-	struct mtd_partition *parts;
-	void (*map_init)(struct map_info *map);
-};
-
-#endif /* __ASM_TXX9_RBTX4939_H */

arch/mips/include/asm/txx9/spi.h

-/*
- * Definitions for TX4937/TX4938 SPI
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#ifndef __ASM_TXX9_SPI_H
-#define __ASM_TXX9_SPI_H
-
-#include <linux/errno.h>
-
-#ifdef CONFIG_SPI
-int spi_eeprom_register(int busid, int chipid, int size);
-int spi_eeprom_read(int busid, int chipid,
-		    int address, unsigned char *buf, int len);
-#else
-static inline int spi_eeprom_register(int busid, int chipid, int size)
-{
-	return -ENODEV;
-}
-static inline int spi_eeprom_read(int busid, int chipid,
-				  int address, unsigned char *buf, int len)
-{
-	return -ENODEV;
-}
-#endif
-
-#endif /* __ASM_TXX9_SPI_H */

arch/mips/kernel/mips-cpc.c

@@ -4,6 +4,7 @@
  * Author: Paul Burton <paul.burton@mips.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/errno.h>
 #include <linux/percpu.h>
 #include <linux/of.h>
@@ -97,7 +98,7 @@ void mips_cpc_lock_other(unsigned int core)
 	curr_core = cpu_core(&current_cpu_data);
 	spin_lock_irqsave(&per_cpu(cpc_core_lock, curr_core),
 			  per_cpu(cpc_core_lock_flags, curr_core));
-	write_cpc_cl_other(core << __ffs(CPC_Cx_OTHER_CORENUM));
+	write_cpc_cl_other(FIELD_PREP(CPC_Cx_OTHER_CORENUM, core));
 
 	/*
 	 * Ensure the core-other region reflects the appropriate core &

arch/mips/kernel/signal.c

@@ -562,6 +562,13 @@ void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 	/* Default to using normal stack */
 	sp = regs->regs[29];
 
+	/*
+	 * If we are on the alternate signal stack and would overflow it, don't.
+	 * Return an always-bogus address instead so we will die with SIGSEGV.
+	 */
+	if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size)))
+		return (void __user __force *)(-1UL);
+
 	/*
 	 * FPU emulator may have it's own trampoline active just
 	 * above the user stack, 16-bytes before the next lowest
@@ -747,23 +754,25 @@ static int setup_rt_frame(void *sig_return, struct ksignal *ksig,
 			  struct pt_regs *regs, sigset_t *set)
 {
 	struct rt_sigframe __user *frame;
-	int err = 0;
 
 	frame = get_sigframe(ksig, regs, sizeof(*frame));
 	if (!access_ok(frame, sizeof (*frame)))
 		return -EFAULT;
 
 	/* Create siginfo.  */
-	err |= copy_siginfo_to_user(&frame->rs_info, &ksig->info);
+	if (copy_siginfo_to_user(&frame->rs_info, &ksig->info))
+		return -EFAULT;
 
 	/* Create the ucontext.	 */
-	err |= __put_user(0, &frame->rs_uc.uc_flags);
-	err |= __put_user(NULL, &frame->rs_uc.uc_link);
-	err |= __save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]);
-	err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext);
-	err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set));
-
-	if (err)
+	if (__put_user(0, &frame->rs_uc.uc_flags))
+		return -EFAULT;
+	if (__put_user(NULL, &frame->rs_uc.uc_link))
+		return -EFAULT;
+	if (__save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]))
+		return -EFAULT;
+	if (setup_sigcontext(regs, &frame->rs_uc.uc_mcontext))
+		return -EFAULT;
+	if (__copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set)))
 		return -EFAULT;
 
 	/*

arch/mips/lantiq/clk.c

@@ -164,6 +164,12 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
 static inline u32 get_counter_resolution(void)
 {
 	u32 res;

arch/mips/lantiq/falcon/sysctrl.c

@@ -141,7 +141,7 @@ static void falcon_gpe_enable(void)
 	unsigned int freq;
 	unsigned int status;
 
-	/* if if the clock is already enabled */
+	/* if the clock is already enabled */
 	status = sysctl_r32(SYSCTL_SYS1, SYS1_INFRAC);
 	if (status & (1 << (GPPC_OFFSET + 1)))
 		return;

arch/mips/loongson2ef/Platform

@@ -2,12 +2,9 @@
 # Loongson Processors' Support
 #
 
-# Only gcc >= 4.4 have Loongson specific support
 cflags-$(CONFIG_CPU_LOONGSON2EF)	+= -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2E) += \
-	$(call cc-option,-march=loongson2e,-march=r4600)
-cflags-$(CONFIG_CPU_LOONGSON2F) += \
-	$(call cc-option,-march=loongson2f,-march=r4600)
+cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e
+cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f
 #
 # Some versions of binutils, not currently mainline as of 2019/02/04, support
 # an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
@@ -32,16 +29,8 @@ cflags-$(CONFIG_CPU_LOONGSON2EF)	+= $(call as-option,-Wa$(comma)-mno-fix-loongso
 
 # Enable the workarounds for Loongson2f
 ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
-  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
-    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
-  else
-    cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
-  endif
-  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
-    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
-  else
-    cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
-  endif
+cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
+cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
 endif
 
 # Some -march= flags enable MMI instructions, and GCC complains about that

arch/mips/mm/c-octeon.c

@@ -332,7 +332,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
 }
 
 /*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
  */
 
 asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -341,7 +341,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
 }
 
 /*
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
  */
 
 asmlinkage void cache_parity_error_octeon_non_recoverable(void)

arch/mips/pci/Makefile

@@ -49,9 +49,7 @@ obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
 obj-$(CONFIG_TOSHIBA_JMR3927)	+= fixup-jmr3927.o
 obj-$(CONFIG_SOC_TX4927)	+= pci-tx4927.o
 obj-$(CONFIG_SOC_TX4938)	+= pci-tx4938.o
-obj-$(CONFIG_SOC_TX4939)	+= pci-tx4939.o
 obj-$(CONFIG_TOSHIBA_RBTX4927)	+= fixup-rbtx4927.o
-obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-rbtx4938.o
 obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o

arch/mips/pci/fixup-rbtx4938.c

-/*
- * Toshiba rbtx4938 pci routines
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/types.h>
-#include <asm/txx9/pci.h>
-#include <asm/txx9/rbtx4938.h>
-
-int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq = tx4938_pcic1_map_irq(dev, slot);
-
-	if (irq >= 0)
-		return irq;
-	irq = pin;
-	/* IRQ rotation */
-	irq--;	/* 0-3 */
-	if (slot == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) {
-		/* PCI CardSlot (IDSEL=A23) */
-		/* PCIA => PCIA (IDSEL=A23) */
-		irq = (irq + 0 + slot) % 4;
-	} else {
-		/* PCI Backplane */
-		if (txx9_pci_option & TXX9_PCI_OPT_PICMG)
-			irq = (irq + 33 - slot) % 4;
-		else
-			irq = (irq + 3 + slot) % 4;
-	}
-	irq++;	/* 1-4 */
-
-	switch (irq) {
-	case 1:
-		irq = RBTX4938_IRQ_IOC_PCIA;
-		break;
-	case 2:
-		irq = RBTX4938_IRQ_IOC_PCIB;
-		break;
-	case 3:
-		irq = RBTX4938_IRQ_IOC_PCIC;
-		break;
-	case 4:
-		irq = RBTX4938_IRQ_IOC_PCID;
-		break;
-	}
-	return irq;
-}

arch/mips/pci/pci-rt3883.c

@@ -102,14 +102,12 @@ static u32 rt3883_pci_read_cfg32(struct rt3883_pci_controller *rpc,
 			       unsigned func, unsigned reg)
 {
 	u32 address;
-	u32 ret;
 
 	address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
 
 	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
-	ret = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
 
-	return ret;
+	return rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
 }
 
 static void rt3883_pci_write_cfg32(struct rt3883_pci_controller *rpc,

arch/mips/pci/pci-tx4939.c

-/*
- * Based on linux/arch/mips/txx9/rbtx4939/setup.c,
- *	    and RBTX49xx patch from CELF patch archive.
- *
- * Copyright 2001, 2003-2005 MontaVista Software Inc.
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <asm/txx9/generic.h>
-#include <asm/txx9/tx4939.h>
-
-int __init tx4939_report_pciclk(void)
-{
-	int pciclk = 0;
-
-	pr_info("PCIC --%s PCICLK:",
-		(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCI66) ?
-		" PCI66" : "");
-	if (__raw_readq(&tx4939_ccfgptr->pcfg) & TX4939_PCFG_PCICLKEN_ALL) {
-		pciclk = txx9_master_clock * 20 / 6;
-		if (!(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCI66))
-			pciclk /= 2;
-		pr_cont("Internal(%u.%uMHz)",
-			(pciclk + 50000) / 1000000,
-			((pciclk + 50000) / 100000) % 10);
-	} else {
-		pr_cont("External");
-		pciclk = -1;
-	}
-	pr_cont("\n");
-	return pciclk;
-}
-
-void __init tx4939_report_pci1clk(void)
-{
-	unsigned int pciclk = txx9_master_clock * 20 / 6;
-
-	pr_info("PCIC1 -- PCICLK:%u.%uMHz\n",
-		(pciclk + 50000) / 1000000,
-		((pciclk + 50000) / 100000) % 10);
-}
-
-int tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
-{
-	if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4939_pcic1ptr) {
-		switch (slot) {
-		case TX4927_PCIC_IDSEL_AD_TO_SLOT(31):
-			if (__raw_readq(&tx4939_ccfgptr->pcfg) &
-			    TX4939_PCFG_ET0MODE)
-				return TXX9_IRQ_BASE + TX4939_IR_ETH(0);
-			break;
-		case TX4927_PCIC_IDSEL_AD_TO_SLOT(30):
-			if (__raw_readq(&tx4939_ccfgptr->pcfg) &
-			    TX4939_PCFG_ET1MODE)
-				return TXX9_IRQ_BASE + TX4939_IR_ETH(1);
-			break;
-		}
-		return 0;
-	}
-	return -1;
-}
-
-int tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq = tx4939_pcic1_map_irq(dev, slot);
-
-	if (irq >= 0)
-		return irq;
-	irq = pin;
-	/* IRQ rotation */
-	irq--;	/* 0-3 */
-	irq = (irq + 33 - slot) % 4;
-	irq++;	/* 1-4 */
-
-	switch (irq) {
-	case 1:
-		irq = TXX9_IRQ_BASE + TX4939_IR_INTA;
-		break;
-	case 2:
-		irq = TXX9_IRQ_BASE + TX4939_IR_INTB;
-		break;
-	case 3:
-		irq = TXX9_IRQ_BASE + TX4939_IR_INTC;
-		break;
-	case 4:
-		irq = TXX9_IRQ_BASE + TX4939_IR_INTD;
-		break;
-	}
-	return irq;
-}
-
-void __init tx4939_setup_pcierr_irq(void)
-{
-	if (request_irq(TXX9_IRQ_BASE + TX4939_IR_PCIERR,
-			tx4927_pcierr_interrupt,
-			0, "PCI error",
-			(void *)TX4939_PCIC_REG))
-		pr_warn("Failed to request irq for PCIERR\n");
-}

arch/mips/ralink/ill_acc.c

@@ -65,6 +65,7 @@ static int __init ill_acc_of_setup(void)
 	}
 
 	irq = irq_of_parse_and_map(np, 0);
+	of_node_put(np);
 	if (!irq) {
 		dev_err(&pdev->dev, "failed to get irq\n");
 		put_device(&pdev->dev);

arch/mips/sgi-ip22/Platform

@@ -23,10 +23,5 @@ endif
 # be 16kb aligned or the handling of the current variable will break.
 # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
 #
-ifdef CONFIG_SGI_IP28
-  ifeq ($(call cc-option-yn,-march=r10000 -mr10k-cache-barrier=store), n)
-      $(error gcc doesn't support needed option -mr10k-cache-barrier=store)
-  endif
-endif
 cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28
 load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000

arch/mips/txx9/Kconfig

@@ -6,6 +6,7 @@ config MACH_TX39XX
 
 config MACH_TX49XX
 	bool
+	select BOOT_ELF32
 	select MACH_TXX9
 	select CEVT_R4K
 	select CSRC_R4K
@@ -38,23 +39,6 @@ config TOSHIBA_RBTX4927
 	  This Toshiba board is based on the TX4927 processor. Say Y here to
 	  support this machine type
 
-config TOSHIBA_RBTX4938
-	bool "Toshiba RBTX4938 board"
-	depends on MACH_TX49XX
-	select SOC_TX4938
-	help
-	  This Toshiba board is based on the TX4938 processor. Say Y here to
-	  support this machine type
-
-config TOSHIBA_RBTX4939
-	bool "Toshiba RBTX4939 board"
-	depends on MACH_TX49XX
-	select SOC_TX4939
-	select TXX9_7SEGLED
-	help
-	  This Toshiba board is based on the TX4939 processor. Say Y here to
-	  support this machine type
-
 config SOC_TX3927
 	bool
 	select CEVT_TXX9
@@ -71,7 +55,6 @@ config SOC_TX4927
 	select IRQ_TXX9
 	select PCI_TX4927
 	select GPIO_TXX9
-	imply HAS_TXX9_ACLC
 
 config SOC_TX4938
 	bool
@@ -81,18 +64,6 @@ config SOC_TX4938
 	select IRQ_TXX9
 	select PCI_TX4927
 	select GPIO_TXX9
-	imply HAS_TXX9_ACLC
-
-config SOC_TX4939
-	bool
-	select CEVT_TXX9
-	imply HAS_TXX9_SERIAL
-	select HAVE_PCI
-	select PCI_TX4927
-	imply HAS_TXX9_ACLC
-
-config TXX9_7SEGLED
-	bool
 
 config TOSHIBA_FPCIB0
 	bool "FPCIB0 Backplane Support"
@@ -104,25 +75,5 @@ config PICMG_PCI_BACKPLANE_DEFAULT
 	depends on PCI && MACH_TXX9
 	default y if !TOSHIBA_FPCIB0
 
-if TOSHIBA_RBTX4938
-
-comment "Multiplex Pin Select"
-choice
-	prompt "PIO[58:61]"
-	default TOSHIBA_RBTX4938_MPLEX_PIO58_61
-
-config TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	bool "PIO"
-config TOSHIBA_RBTX4938_MPLEX_NAND
-	bool "NAND"
-config TOSHIBA_RBTX4938_MPLEX_ATA
-	bool "ATA"
-config TOSHIBA_RBTX4938_MPLEX_KEEP
-	bool "Keep firmware settings"
-
-endchoice
-
-endif
-
 config PCI_TX4927
 	bool

arch/mips/txx9/Makefile

@@ -14,5 +14,3 @@ obj-$(CONFIG_TOSHIBA_JMR3927)  += jmr3927/
 # Toshiba RBTX49XX boards
 #
 obj-$(CONFIG_TOSHIBA_RBTX4927) += rbtx4927/
-obj-$(CONFIG_TOSHIBA_RBTX4938) += rbtx4938/
-obj-$(CONFIG_TOSHIBA_RBTX4939) += rbtx4939/

arch/mips/txx9/generic/7segled.c

-/*
- * 7 Segment LED routines
- * Based on RBTX49xx patch from CELF patch archive.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * (C) Copyright TOSHIBA CORPORATION 2005-2007
- * All Rights Reserved.
- */
-#include <linux/device.h>
-#include <linux/slab.h>
-#include <linux/map_to_7segment.h>
-#include <asm/txx9/generic.h>
-
-static unsigned int tx_7segled_num;
-static void (*tx_7segled_putc)(unsigned int pos, unsigned char val);
-
-void __init txx9_7segled_init(unsigned int num,
-			      void (*putc)(unsigned int pos, unsigned char val))
-{
-	tx_7segled_num = num;
-	tx_7segled_putc = putc;
-}
-
-static SEG7_CONVERSION_MAP(txx9_seg7map, MAP_ASCII7SEG_ALPHANUM_LC);
-
-int txx9_7segled_putc(unsigned int pos, char c)
-{
-	if (pos >= tx_7segled_num)
-		return -EINVAL;
-	c = map_to_seg7(&txx9_seg7map, c);
-	if (c < 0)
-		return c;
-	tx_7segled_putc(pos, c);
-	return 0;
-}
-
-static ssize_t ascii_store(struct device *dev,
-			   struct device_attribute *attr,
-			   const char *buf, size_t size)
-{
-	unsigned int ch = dev->id;
-	txx9_7segled_putc(ch, buf[0]);
-	return size;
-}
-
-static ssize_t raw_store(struct device *dev,
-			 struct device_attribute *attr,
-			 const char *buf, size_t size)
-{
-	unsigned int ch = dev->id;
-	tx_7segled_putc(ch, buf[0]);
-	return size;
-}
-
-static DEVICE_ATTR_WO(ascii);
-static DEVICE_ATTR_WO(raw);
-
-static ssize_t map_seg7_show(struct device *dev,
-			     struct device_attribute *attr,
-			     char *buf)
-{
-	memcpy(buf, &txx9_seg7map, sizeof(txx9_seg7map));
-	return sizeof(txx9_seg7map);
-}
-
-static ssize_t map_seg7_store(struct device *dev,
-			      struct device_attribute *attr,
-			      const char *buf, size_t size)
-{
-	if (size != sizeof(txx9_seg7map))
-		return -EINVAL;
-	memcpy(&txx9_seg7map, buf, size);
-	return size;
-}
-
-static DEVICE_ATTR(map_seg7, 0600, map_seg7_show, map_seg7_store);
-
-static struct bus_type tx_7segled_subsys = {
-	.name		= "7segled",
-	.dev_name	= "7segled",
-};
-
-static void tx_7segled_release(struct device *dev)
-{
-	kfree(dev);
-}
-
-static int __init tx_7segled_init_sysfs(void)
-{
-	int error, i;
-	if (!tx_7segled_num)
-		return -ENODEV;
-	error = subsys_system_register(&tx_7segled_subsys, NULL);
-	if (error)
-		return error;
-	error = device_create_file(tx_7segled_subsys.dev_root, &dev_attr_map_seg7);
-	if (error)
-		return error;
-	for (i = 0; i < tx_7segled_num; i++) {
-		struct device *dev;
-		dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-		if (!dev) {
-			error = -ENODEV;
-			break;
-		}
-		dev->id = i;
-		dev->bus = &tx_7segled_subsys;
-		dev->release = &tx_7segled_release;
-		error = device_register(dev);
-		if (error) {
-			put_device(dev);
-			return error;
-		}
-		device_create_file(dev, &dev_attr_ascii);
-		device_create_file(dev, &dev_attr_raw);
-	}
-	return error;
-}
-
-device_initcall(tx_7segled_init_sysfs);

arch/mips/txx9/generic/Makefile

@@ -8,7 +8,4 @@ obj-$(CONFIG_PCI)	+= pci.o
 obj-$(CONFIG_SOC_TX3927)	+= setup_tx3927.o irq_tx3927.o
 obj-$(CONFIG_SOC_TX4927)	+= mem_tx4927.o setup_tx4927.o irq_tx4927.o
 obj-$(CONFIG_SOC_TX4938)	+= mem_tx4927.o setup_tx4938.o irq_tx4938.o
-obj-$(CONFIG_SOC_TX4939)	+= setup_tx4939.o irq_tx4939.o
 obj-$(CONFIG_TOSHIBA_FPCIB0)	+= smsc_fdc37m81x.o
-obj-$(CONFIG_SPI)		+= spi_eeprom.o
-obj-$(CONFIG_TXX9_7SEGLED)	+= 7segled.o

arch/mips/txx9/generic/irq_tx4939.c

-/*
- * TX4939 irq routines
- * Based on linux/arch/mips/kernel/irq_txx9.c,
- *	    and RBTX49xx patch from CELF patch archive.
- *
- * Copyright 2001, 2003-2005 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *	   ahennessy@mvista.com
- *	   source@mvista.com
- * Copyright (C) 2000-2001,2005-2007 Toshiba Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-/*
- * TX4939 defines 64 IRQs.
- * Similer to irq_txx9.c but different register layouts.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <asm/irq_cpu.h>
-#include <asm/txx9irq.h>
-#include <asm/txx9/tx4939.h>
-
-/* IRCER : Int. Control Enable */
-#define TXx9_IRCER_ICE	0x00000001
-
-/* IRCR : Int. Control */
-#define TXx9_IRCR_LOW	0x00000000
-#define TXx9_IRCR_HIGH	0x00000001
-#define TXx9_IRCR_DOWN	0x00000002
-#define TXx9_IRCR_UP	0x00000003
-#define TXx9_IRCR_EDGE(cr)	((cr) & 0x00000002)
-
-/* IRSCR : Int. Status Control */
-#define TXx9_IRSCR_EIClrE	0x00000100
-#define TXx9_IRSCR_EIClr_MASK	0x0000000f
-
-/* IRCSR : Int. Current Status */
-#define TXx9_IRCSR_IF	0x00010000
-
-#define irc_dlevel	0
-#define irc_elevel	1
-
-static struct {
-	unsigned char level;
-	unsigned char mode;
-} tx4939irq[TX4939_NUM_IR] __read_mostly;
-
-static void tx4939_irq_unmask(struct irq_data *d)
-{
-	unsigned int irq_nr = d->irq - TXX9_IRQ_BASE;
-	u32 __iomem *lvlp;
-	int ofs;
-	if (irq_nr < 32) {
-		irq_nr--;
-		lvlp = &tx4939_ircptr->lvl[(irq_nr % 16) / 2].r;
-	} else {
-		irq_nr -= 32;
-		lvlp = &tx4939_ircptr->lvl[8 + (irq_nr % 16) / 2].r;
-	}
-	ofs = (irq_nr & 16) + (irq_nr & 1) * 8;
-	__raw_writel((__raw_readl(lvlp) & ~(0xff << ofs))
-		     | (tx4939irq[irq_nr].level << ofs),
-		     lvlp);
-}
-
-static inline void tx4939_irq_mask(struct irq_data *d)
-{
-	unsigned int irq_nr = d->irq - TXX9_IRQ_BASE;
-	u32 __iomem *lvlp;
-	int ofs;
-	if (irq_nr < 32) {
-		irq_nr--;
-		lvlp = &tx4939_ircptr->lvl[(irq_nr % 16) / 2].r;
-	} else {
-		irq_nr -= 32;
-		lvlp = &tx4939_ircptr->lvl[8 + (irq_nr % 16) / 2].r;
-	}
-	ofs = (irq_nr & 16) + (irq_nr & 1) * 8;
-	__raw_writel((__raw_readl(lvlp) & ~(0xff << ofs))
-		     | (irc_dlevel << ofs),
-		     lvlp);
-	mmiowb();
-}
-
-static void tx4939_irq_mask_ack(struct irq_data *d)
-{
-	unsigned int irq_nr = d->irq - TXX9_IRQ_BASE;
-
-	tx4939_irq_mask(d);
-	if (TXx9_IRCR_EDGE(tx4939irq[irq_nr].mode)) {
-		irq_nr--;
-		/* clear edge detection */
-		__raw_writel((TXx9_IRSCR_EIClrE | (irq_nr & 0xf))
-			     << (irq_nr & 0x10),
-			     &tx4939_ircptr->edc.r);
-	}
-}
-
-static int tx4939_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	unsigned int irq_nr = d->irq - TXX9_IRQ_BASE;
-	u32 cr;
-	u32 __iomem *crp;
-	int ofs;
-	int mode;
-
-	if (flow_type & IRQF_TRIGGER_PROBE)
-		return 0;
-	switch (flow_type & IRQF_TRIGGER_MASK) {
-	case IRQF_TRIGGER_RISING:
-		mode = TXx9_IRCR_UP;
-		break;
-	case IRQF_TRIGGER_FALLING:
-		mode = TXx9_IRCR_DOWN;
-		break;
-	case IRQF_TRIGGER_HIGH:
-		mode = TXx9_IRCR_HIGH;
-		break;
-	case IRQF_TRIGGER_LOW:
-		mode = TXx9_IRCR_LOW;
-		break;
-	default:
-		return -EINVAL;
-	}
-	if (irq_nr < 32) {
-		irq_nr--;
-		crp = &tx4939_ircptr->dm[(irq_nr & 8) >> 3].r;
-	} else {
-		irq_nr -= 32;
-		crp = &tx4939_ircptr->dm2[((irq_nr & 8) >> 3)].r;
-	}
-	ofs = (((irq_nr & 16) >> 1) | (irq_nr & (8 - 1))) * 2;
-	cr = __raw_readl(crp);
-	cr &= ~(0x3 << ofs);
-	cr |= (mode & 0x3) << ofs;
-	__raw_writel(cr, crp);
-	tx4939irq[irq_nr].mode = mode;
-	return 0;
-}
-
-static struct irq_chip tx4939_irq_chip = {
-	.name		= "TX4939",
-	.irq_ack	= tx4939_irq_mask_ack,
-	.irq_mask	= tx4939_irq_mask,
-	.irq_mask_ack	= tx4939_irq_mask_ack,
-	.irq_unmask	= tx4939_irq_unmask,
-	.irq_set_type	= tx4939_irq_set_type,
-};
-
-static int tx4939_irq_set_pri(int irc_irq, int new_pri)
-{
-	int old_pri;
-
-	if ((unsigned int)irc_irq >= TX4939_NUM_IR)
-		return 0;
-	old_pri = tx4939irq[irc_irq].level;
-	tx4939irq[irc_irq].level = new_pri;
-	return old_pri;
-}
-
-void __init tx4939_irq_init(void)
-{
-	int i;
-
-	mips_cpu_irq_init();
-	/* disable interrupt control */
-	__raw_writel(0, &tx4939_ircptr->den.r);
-	__raw_writel(0, &tx4939_ircptr->maskint.r);
-	__raw_writel(0, &tx4939_ircptr->maskext.r);
-	/* irq_base + 0 is not used */
-	for (i = 1; i < TX4939_NUM_IR; i++) {
-		tx4939irq[i].level = 4; /* middle level */
-		tx4939irq[i].mode = TXx9_IRCR_LOW;
-		irq_set_chip_and_handler(TXX9_IRQ_BASE + i, &tx4939_irq_chip,
-					 handle_level_irq);
-	}
-
-	/* mask all IRC interrupts */
-	__raw_writel(0, &tx4939_ircptr->msk.r);
-	for (i = 0; i < 16; i++)
-		__raw_writel(0, &tx4939_ircptr->lvl[i].r);
-	/* setup IRC interrupt mode (Low Active) */
-	for (i = 0; i < 2; i++)
-		__raw_writel(0, &tx4939_ircptr->dm[i].r);
-	for (i = 0; i < 2; i++)
-		__raw_writel(0, &tx4939_ircptr->dm2[i].r);
-	/* enable interrupt control */
-	__raw_writel(TXx9_IRCER_ICE, &tx4939_ircptr->den.r);
-	__raw_writel(irc_elevel, &tx4939_ircptr->msk.r);
-
-	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + TX4939_IRC_INT,
-				handle_simple_irq);
-
-	/* raise priority for errors, timers, sio */
-	tx4939_irq_set_pri(TX4939_IR_WTOERR, 7);
-	tx4939_irq_set_pri(TX4939_IR_PCIERR, 7);
-	tx4939_irq_set_pri(TX4939_IR_PCIPME, 7);
-	for (i = 0; i < TX4939_NUM_IR_TMR; i++)
-		tx4939_irq_set_pri(TX4939_IR_TMR(i), 6);
-	for (i = 0; i < TX4939_NUM_IR_SIO; i++)
-		tx4939_irq_set_pri(TX4939_IR_SIO(i), 5);
-}
-
-int tx4939_irq(void)
-{
-	u32 csr = __raw_readl(&tx4939_ircptr->cs.r);
-
-	if (likely(!(csr & TXx9_IRCSR_IF)))
-		return TXX9_IRQ_BASE + (csr & (TX4939_NUM_IR - 1));
-	return -1;
-}

arch/mips/txx9/generic/setup.c

@@ -314,16 +314,6 @@ static void __init select_board(void)
 	case 0x4937:
 		txx9_board_vec = &rbtx4937_vec;
 		break;
-#endif
-#ifdef CONFIG_TOSHIBA_RBTX4938
-	case 0x4938:
-		txx9_board_vec = &rbtx4938_vec;
-		break;
-#endif
-#ifdef CONFIG_TOSHIBA_RBTX4939
-	case 0x4939:
-		txx9_board_vec = &rbtx4939_vec;
-		break;
 #endif
 	}
 #endif
@@ -590,21 +580,6 @@ unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none;
 EXPORT_SYMBOL(__swizzle_addr_b);
 #endif
 
-#ifdef NEEDS_TXX9_IOSWABW
-static u16 ioswabw_default(volatile u16 *a, u16 x)
-{
-	return le16_to_cpu(x);
-}
-static u16 __mem_ioswabw_default(volatile u16 *a, u16 x)
-{
-	return x;
-}
-u16 (*ioswabw)(volatile u16 *a, u16 x) = ioswabw_default;
-EXPORT_SYMBOL(ioswabw);
-u16 (*__mem_ioswabw)(volatile u16 *a, u16 x) = __mem_ioswabw_default;
-EXPORT_SYMBOL(__mem_ioswabw);
-#endif
-
 void __init txx9_physmap_flash_init(int no, unsigned long addr,
 				    unsigned long size,
 				    const struct physmap_flash_data *pdata)
@@ -840,34 +815,6 @@ void __init txx9_aclc_init(unsigned long baseaddr, int irq,
 			   unsigned int dma_chan_out,
 			   unsigned int dma_chan_in)
 {
-#if IS_ENABLED(CONFIG_SND_SOC_TXX9ACLC)
-	unsigned int dma_base = dmac_id * TXX9_DMA_MAX_NR_CHANNELS;
-	struct resource res[] = {
-		{
-			.start = baseaddr,
-			.end = baseaddr + 0x100 - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = irq,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.name = "txx9dmac-chan",
-			.start = dma_base + dma_chan_out,
-			.flags = IORESOURCE_DMA,
-		}, {
-			.name = "txx9dmac-chan",
-			.start = dma_base + dma_chan_in,
-			.flags = IORESOURCE_DMA,
-		}
-	};
-	struct platform_device *pdev =
-		platform_device_alloc("txx9aclc-ac97", -1);
-
-	if (!pdev ||
-	    platform_device_add_resources(pdev, res, ARRAY_SIZE(res)) ||
-	    platform_device_add(pdev))
-		platform_device_put(pdev);
-#endif
 }
 
 static struct bus_type txx9_sramc_subsys = {

arch/mips/txx9/generic/spi_eeprom.c

-/*
- * spi_eeprom.c
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <asm/txx9/spi.h>
-
-#define AT250X0_PAGE_SIZE	8
-
-/* register board information for at25 driver */
-int __init spi_eeprom_register(int busid, int chipid, int size)
-{
-	struct spi_board_info info = {
-		.modalias = "at25",
-		.max_speed_hz = 1500000,	/* 1.5Mbps */
-		.bus_num = busid,
-		.chip_select = chipid,
-		/* Mode 0: High-Active, Sample-Then-Shift */
-	};
-	struct spi_eeprom *eeprom;
-	eeprom = kzalloc(sizeof(*eeprom), GFP_KERNEL);
-	if (!eeprom)
-		return -ENOMEM;
-	strcpy(eeprom->name, "at250x0");
-	eeprom->byte_len = size;
-	eeprom->page_size = AT250X0_PAGE_SIZE;
-	eeprom->flags = EE_ADDR1;
-	info.platform_data = eeprom;
-	return spi_register_board_info(&info, 1);
-}
-
-/* simple temporary spi driver to provide early access to seeprom. */
-
-static struct read_param {
-	int busid;
-	int chipid;
-	int address;
-	unsigned char *buf;
-	int len;
-} *read_param;
-
-static int __init early_seeprom_probe(struct spi_device *spi)
-{
-	int stat = 0;
-	u8 cmd[2];
-	int len = read_param->len;
-	char *buf = read_param->buf;
-	int address = read_param->address;
-
-	dev_info(&spi->dev, "spiclk %u KHz.\n",
-		 (spi->max_speed_hz + 500) / 1000);
-	if (read_param->busid != spi->master->bus_num ||
-	    read_param->chipid != spi->chip_select)
-		return -ENODEV;
-	while (len > 0) {
-		/* spi_write_then_read can only work with small chunk */
-		int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE;
-		cmd[0] = 0x03;	/* AT25_READ */
-		cmd[1] = address;
-		stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c);
-		buf += c;
-		len -= c;
-		address += c;
-	}
-	return stat;
-}
-
-static struct spi_driver early_seeprom_driver __initdata = {
-	.driver = {
-		.name	= "at25",
-	},
-	.probe	= early_seeprom_probe,
-};
-
-int __init spi_eeprom_read(int busid, int chipid, int address,
-			   unsigned char *buf, int len)
-{
-	int ret;
-	struct read_param param = {
-		.busid = busid,
-		.chipid = chipid,
-		.address = address,
-		.buf = buf,
-		.len = len
-	};
-
-	read_param = &param;
-	ret = spi_register_driver(&early_seeprom_driver);
-	if (!ret)
-		spi_unregister_driver(&early_seeprom_driver);
-	return ret;
-}

arch/mips/txx9/rbtx4938/Makefile

-# SPDX-License-Identifier: GPL-2.0-only
-obj-y	+= prom.o setup.o irq.o

arch/mips/txx9/rbtx4938/irq.c

-/*
- * Toshiba RBTX4938 specific interrupt handlers
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-
-/*
- * MIPS_CPU_IRQ_BASE+00 Software 0
- * MIPS_CPU_IRQ_BASE+01 Software 1
- * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
- * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
- * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
- * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
- * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
- * MIPS_CPU_IRQ_BASE+07 CPU TIMER
- *
- * TXX9_IRQ_BASE+00
- * TXX9_IRQ_BASE+01
- * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
- * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
- * TXX9_IRQ_BASE+04
- * TXX9_IRQ_BASE+05 TX4938 ETH1
- * TXX9_IRQ_BASE+06 TX4938 ETH0
- * TXX9_IRQ_BASE+07
- * TXX9_IRQ_BASE+08 TX4938 SIO 0
- * TXX9_IRQ_BASE+09 TX4938 SIO 1
- * TXX9_IRQ_BASE+10 TX4938 DMA0
- * TXX9_IRQ_BASE+11 TX4938 DMA1
- * TXX9_IRQ_BASE+12 TX4938 DMA2
- * TXX9_IRQ_BASE+13 TX4938 DMA3
- * TXX9_IRQ_BASE+14
- * TXX9_IRQ_BASE+15
- * TXX9_IRQ_BASE+16 TX4938 PCIC
- * TXX9_IRQ_BASE+17 TX4938 TMR0
- * TXX9_IRQ_BASE+18 TX4938 TMR1
- * TXX9_IRQ_BASE+19 TX4938 TMR2
- * TXX9_IRQ_BASE+20
- * TXX9_IRQ_BASE+21
- * TXX9_IRQ_BASE+22 TX4938 PCIERR
- * TXX9_IRQ_BASE+23
- * TXX9_IRQ_BASE+24
- * TXX9_IRQ_BASE+25
- * TXX9_IRQ_BASE+26
- * TXX9_IRQ_BASE+27
- * TXX9_IRQ_BASE+28
- * TXX9_IRQ_BASE+29
- * TXX9_IRQ_BASE+30
- * TXX9_IRQ_BASE+31 TX4938 SPI
- *
- * RBTX4938_IRQ_IOC+00 PCI-D
- * RBTX4938_IRQ_IOC+01 PCI-C
- * RBTX4938_IRQ_IOC+02 PCI-B
- * RBTX4938_IRQ_IOC+03 PCI-A
- * RBTX4938_IRQ_IOC+04 RTC
- * RBTX4938_IRQ_IOC+05 ATA
- * RBTX4938_IRQ_IOC+06 MODEM
- * RBTX4938_IRQ_IOC+07 SWINT
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/txx9/generic.h>
-#include <asm/txx9/rbtx4938.h>
-
-static int toshiba_rbtx4938_irq_nested(int sw_irq)
-{
-	u8 level3;
-
-	level3 = readb(rbtx4938_imstat_addr);
-	if (unlikely(!level3))
-		return -1;
-	/* must use fls so onboard ATA has priority */
-	return RBTX4938_IRQ_IOC + __fls8(level3);
-}
-
-static void toshiba_rbtx4938_irq_ioc_enable(struct irq_data *d)
-{
-	unsigned char v;
-
-	v = readb(rbtx4938_imask_addr);
-	v |= (1 << (d->irq - RBTX4938_IRQ_IOC));
-	writeb(v, rbtx4938_imask_addr);
-	mmiowb();
-}
-
-static void toshiba_rbtx4938_irq_ioc_disable(struct irq_data *d)
-{
-	unsigned char v;
-
-	v = readb(rbtx4938_imask_addr);
-	v &= ~(1 << (d->irq - RBTX4938_IRQ_IOC));
-	writeb(v, rbtx4938_imask_addr);
-	mmiowb();
-}
-
-#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
-static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
-	.name = TOSHIBA_RBTX4938_IOC_NAME,
-	.irq_mask = toshiba_rbtx4938_irq_ioc_disable,
-	.irq_unmask = toshiba_rbtx4938_irq_ioc_enable,
-};
-
-static int rbtx4938_irq_dispatch(int pending)
-{
-	int irq;
-
-	if (pending & STATUSF_IP7)
-		irq = MIPS_CPU_IRQ_BASE + 7;
-	else if (pending & STATUSF_IP2) {
-		irq = txx9_irq();
-		if (irq == RBTX4938_IRQ_IOCINT)
-			irq = toshiba_rbtx4938_irq_nested(irq);
-	} else if (pending & STATUSF_IP1)
-		irq = MIPS_CPU_IRQ_BASE + 0;
-	else if (pending & STATUSF_IP0)
-		irq = MIPS_CPU_IRQ_BASE + 1;
-	else
-		irq = -1;
-	return irq;
-}
-
-static void __init toshiba_rbtx4938_irq_ioc_init(void)
-{
-	int i;
-
-	for (i = RBTX4938_IRQ_IOC;
-	     i < RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC; i++)
-		irq_set_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type,
-					 handle_level_irq);
-
-	irq_set_chained_handler(RBTX4938_IRQ_IOCINT, handle_simple_irq);
-}
-
-void __init rbtx4938_irq_setup(void)
-{
-	txx9_irq_dispatch = rbtx4938_irq_dispatch;
-	/* Now, interrupt control disabled, */
-	/* all IRC interrupts are masked, */
-	/* all IRC interrupt mode are Low Active. */
-
-	/* mask all IOC interrupts */
-	writeb(0, rbtx4938_imask_addr);
-
-	/* clear SoftInt interrupts */
-	writeb(0, rbtx4938_softint_addr);
-	tx4938_irq_init();
-	toshiba_rbtx4938_irq_ioc_init();
-	/* Onboard 10M Ether: High Active */
-	irq_set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH);
-}

arch/mips/txx9/rbtx4938/prom.c

-/*
- * rbtx4938 specific prom routines
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <asm/txx9/generic.h>
-#include <asm/txx9/rbtx4938.h>
-
-void __init rbtx4938_prom_init(void)
-{
-	memblock_add(0, tx4938_get_mem_size());
-	txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
-}

arch/mips/txx9/rbtx4939/Makefile

-# SPDX-License-Identifier: GPL-2.0-only
-obj-y	 += irq.o setup.o prom.o

arch/mips/txx9/rbtx4939/irq.c

-/*
- * Toshiba RBTX4939 interrupt routines
- * Based on linux/arch/mips/txx9/rbtx4938/irq.c,
- *	    and RBTX49xx patch from CELF patch archive.
- *
- * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/txx9/rbtx4939.h>
-
-/*
- * RBTX4939 IOC controller definition
- */
-
-static void rbtx4939_ioc_irq_unmask(struct irq_data *d)
-{
-	int ioc_nr = d->irq - RBTX4939_IRQ_IOC;
-
-	writeb(readb(rbtx4939_ien_addr) | (1 << ioc_nr), rbtx4939_ien_addr);
-}
-
-static void rbtx4939_ioc_irq_mask(struct irq_data *d)
-{
-	int ioc_nr = d->irq - RBTX4939_IRQ_IOC;
-
-	writeb(readb(rbtx4939_ien_addr) & ~(1 << ioc_nr), rbtx4939_ien_addr);
-	mmiowb();
-}
-
-static struct irq_chip rbtx4939_ioc_irq_chip = {
-	.name		= "IOC",
-	.irq_mask	= rbtx4939_ioc_irq_mask,
-	.irq_unmask	= rbtx4939_ioc_irq_unmask,
-};
-
-
-static inline int rbtx4939_ioc_irqroute(void)
-{
-	unsigned char istat = readb(rbtx4939_ifac2_addr);
-
-	if (unlikely(istat == 0))
-		return -1;
-	return RBTX4939_IRQ_IOC + __fls8(istat);
-}
-
-static int rbtx4939_irq_dispatch(int pending)
-{
-	int irq;
-
-	if (pending & CAUSEF_IP7)
-		return MIPS_CPU_IRQ_BASE + 7;
-	irq = tx4939_irq();
-	if (likely(irq >= 0)) {
-		/* redirect IOC interrupts */
-		switch (irq) {
-		case RBTX4939_IRQ_IOCINT:
-			irq = rbtx4939_ioc_irqroute();
-			break;
-		}
-	} else if (pending & CAUSEF_IP0)
-		irq = MIPS_CPU_IRQ_BASE + 0;
-	else if (pending & CAUSEF_IP1)
-		irq = MIPS_CPU_IRQ_BASE + 1;
-	else
-		irq = -1;
-	return irq;
-}
-
-void __init rbtx4939_irq_setup(void)
-{
-	int i;
-
-	/* mask all IOC interrupts */
-	writeb(0, rbtx4939_ien_addr);
-
-	/* clear SoftInt interrupts */
-	writeb(0, rbtx4939_softint_addr);
-
-	txx9_irq_dispatch = rbtx4939_irq_dispatch;
-
-	tx4939_irq_init();
-	for (i = RBTX4939_IRQ_IOC;
-	     i < RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC; i++)
-		irq_set_chip_and_handler(i, &rbtx4939_ioc_irq_chip,
-					 handle_level_irq);
-
-	irq_set_chained_handler(RBTX4939_IRQ_IOCINT, handle_simple_irq);
-}

arch/mips/txx9/rbtx4939/prom.c

-/*
- * rbtx4939 specific prom routines
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <asm/txx9/generic.h>
-#include <asm/txx9/rbtx4939.h>
-
-void __init rbtx4939_prom_init(void)
-{
-	unsigned long start, size;
-	u64 win;
-	int i;
-
-	for (i = 0; i < 4; i++) {
-		if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i)))
-			continue;
-		win = ____raw_readq(&tx4939_ddrcptr->win[i]);
-		start = (unsigned long)(win >> 48);
-		size = (((unsigned long)(win >> 32) & 0xffff) + 1) - start;
-		memblock_add(start << 20, size << 20);
-	}
-	txx9_sio_putchar_init(TX4939_SIO_REG(0) & 0xfffffffffULL);
-}

drivers/char/hw_random/Kconfig

@@ -226,19 +226,6 @@ config HW_RANDOM_VIRTIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called virtio-rng.  If unsure, say N.
 
-config HW_RANDOM_TX4939
-	tristate "TX4939 Random Number Generator support"
-	depends on SOC_TX4939
-	default HW_RANDOM
-	help
-	  This driver provides kernel-side support for the Random Number
-	  Generator hardware found on TX4939 SoC.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tx4939-rng.
-
-	  If unsure, say Y.
-
 config HW_RANDOM_MXC_RNGA
 	tristate "Freescale i.MX RNGA Random Number Generator"
 	depends on SOC_IMX31

drivers/char/hw_random/Makefile

@@ -20,7 +20,6 @@ obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
 obj-$(CONFIG_HW_RANDOM_OMAP3_ROM) += omap3-rom-rng.o
 obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
 obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
-obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
 obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
 obj-$(CONFIG_HW_RANDOM_IMX_RNGC) += imx-rngc.o
 obj-$(CONFIG_HW_RANDOM_INGENIC_RNG) += ingenic-rng.o

drivers/mtd/maps/Kconfig

@@ -357,12 +357,6 @@ config MTD_INTEL_VR_NOR
 	  Map driver for a NOR flash bank located on the Expansion Bus of the
 	  Intel Vermilion Range chipset.
 
-config MTD_RBTX4939
-	tristate "Map driver for RBTX4939 board"
-	depends on TOSHIBA_RBTX4939 && MTD_CFI && MTD_COMPLEX_MAPPINGS
-	help
-	  Map driver for NOR flash chips on RBTX4939 board.
-
 config MTD_PLATRAM
 	tristate "Map driver for platform device RAM (mtd-ram)"
 	select MTD_RAM

drivers/mtd/maps/Makefile

@@ -42,6 +42,5 @@ obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
 obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
 obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR)	+= intel_vr_nor.o
-obj-$(CONFIG_MTD_RBTX4939)	+= rbtx4939-flash.o
 obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
 obj-$(CONFIG_MTD_LANTIQ)	+= lantiq-flash.o

drivers/mtd/nand/raw/Kconfig

@@ -309,7 +309,7 @@ config MTD_NAND_DAVINCI
 
 config MTD_NAND_TXX9NDFMC
 	tristate "TXx9 NAND controller"
-	depends on SOC_TX4938 || SOC_TX4939 || COMPILE_TEST
+	depends on SOC_TX4938 || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  This enables the NAND flash controller on the TXx9 SoCs.

drivers/pci/controller/Kconfig

@@ -274,7 +274,7 @@ config PCIE_BRCMSTB
 		   BMIPS_GENERIC || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
-	default ARCH_BRCMSTB
+	default ARCH_BRCMSTB || BMIPS_GENERIC
 	help
 	  Say Y here to enable PCIe host controller support for
 	  Broadcom STB based SoCs, like the Raspberry Pi 4.

drivers/platform/mips/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_CPU_HWMON) += cpu_hwmon.o
 obj-$(CONFIG_RS780E_ACPI) += rs780e-acpi.o
+obj-$(CONFIG_LS2K_RESET) += ls2k-reset.o