[SCSI] aic94xx: Supermicro motherboards support

Add PCI id. Plus correct for possibly missing resistor that can cause
FLASHEX to have the wrong value.
Signed-off-by: Sergey Kononenko <sergk@sergk.org.ua>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/aic94xx/aic94xx_hwi.h

@@ -46,6 +46,7 @@
 #define PCI_DEVICE_ID_ADAPTEC2_RAZOR10 0x410
 #define PCI_DEVICE_ID_ADAPTEC2_RAZOR12 0x412
 #define PCI_DEVICE_ID_ADAPTEC2_RAZOR1E 0x41E
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR1F 0x41F
 #define PCI_DEVICE_ID_ADAPTEC2_RAZOR30 0x430
 #define PCI_DEVICE_ID_ADAPTEC2_RAZOR32 0x432
 #define PCI_DEVICE_ID_ADAPTEC2_RAZOR3E 0x43E

drivers/scsi/aic94xx/aic94xx_init.c

@@ -814,6 +814,8 @@ static const struct pci_device_id aic94xx_pci_table[] __devinitdata = {
 	 0, 0, 1},
 	{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR1E),
 	 0, 0, 1},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR1F),
+	 0, 0, 1},
 	{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR30),
 	 0, 0, 2},
 	{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR32),

drivers/scsi/aic94xx/aic94xx_sds.c

@@ -630,10 +630,6 @@ static int asd_flash_getid(struct asd_ha_struct *asd_ha)
 
 	reg = asd_read_reg_dword(asd_ha, EXSICNFGR);
 
-	if (!(reg & FLASHEX)) {
-		ASD_DPRINTK("flash doesn't exist\n");
-		return -ENOENT;
-	}
 	if (pci_read_config_dword(asd_ha->pcidev, PCI_CONF_FLSH_BAR,
 				  &asd_ha->hw_prof.flash.bar)) {
 		asd_printk("couldn't read PCI_CONF_FLSH_BAR of %s\n",