Commit 4016badd authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

bnx2: Report MDI/MDIX status to ethtool.

Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 41033b65
......@@ -1197,6 +1197,8 @@ bnx2_copper_linkup(struct bnx2 *bp)
{
u32 bmcr;
bp->phy_flags &= ~BNX2_PHY_FLAG_MDIX;
bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
if (bmcr & BMCR_ANENABLE) {
u32 local_adv, remote_adv, common;
......@@ -1255,6 +1257,14 @@ bnx2_copper_linkup(struct bnx2 *bp)
}
}
if (bp->link_up) {
u32 ext_status;
bnx2_read_phy(bp, MII_BNX2_EXT_STATUS, &ext_status);
if (ext_status & EXT_STATUS_MDIX)
bp->phy_flags |= BNX2_PHY_FLAG_MDIX;
}
return 0;
}
......@@ -6874,6 +6884,12 @@ bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
if (netif_carrier_ok(dev)) {
ethtool_cmd_speed_set(cmd, bp->line_speed);
cmd->duplex = bp->duplex;
if (!(bp->phy_flags & BNX2_PHY_FLAG_SERDES)) {
if (bp->phy_flags & BNX2_PHY_FLAG_MDIX)
cmd->eth_tp_mdix = ETH_TP_MDI_X;
else
cmd->eth_tp_mdix = ETH_TP_MDI;
}
}
else {
ethtool_cmd_speed_set(cmd, -1);
......
......@@ -6471,6 +6471,9 @@ struct l2_fhdr {
#define BCM5708S_TX_ACTL3 0x17
#define MII_BNX2_EXT_STATUS 0x11
#define EXT_STATUS_MDIX (1 << 13)
#define MII_BNX2_AUX_CTL 0x18
#define AUX_CTL_MISC_CTL 0x7007
#define AUX_CTL_MISC_CTL_WIRESPEED (1 << 4)
......@@ -6850,6 +6853,7 @@ struct bnx2 {
#define BNX2_PHY_FLAG_REMOTE_PHY_CAP 0x00000800
#define BNX2_PHY_FLAG_FORCED_DOWN 0x00001000
#define BNX2_PHY_FLAG_NO_PARALLEL 0x00002000
#define BNX2_PHY_FLAG_MDIX 0x00004000
u32 mii_bmcr;
u32 mii_bmsr;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment