Commit 40473132 authored by Dan Murphy's avatar Dan Murphy Committed by Pavel Machek

leds: lp5523: Update the lp5523 code to add multicolor brightness function

Add the multicolor brightness call back to support the multicolor
framework. This call back allows setting brightness on grouped channels
in a single function.
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Acked-by: default avatarJacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
Signed-off-by: default avatarPavel Machek <pavel@ucw.cz>
parent 92a81562
...@@ -792,6 +792,25 @@ static ssize_t store_master_fader_leds(struct device *dev, ...@@ -792,6 +792,25 @@ static ssize_t store_master_fader_leds(struct device *dev,
return ret; return ret;
} }
static int lp5523_multicolor_brightness(struct lp55xx_led *led)
{
struct lp55xx_chip *chip = led->chip;
int ret;
int i;
mutex_lock(&chip->lock);
for (i = 0; i < led->mc_cdev.num_colors; i++) {
ret = lp55xx_write(chip,
LP5523_REG_LED_PWM_BASE +
led->mc_cdev.subled_info[i].channel,
led->mc_cdev.subled_info[i].brightness);
if (ret)
break;
}
mutex_unlock(&chip->lock);
return ret;
}
static int lp5523_led_brightness(struct lp55xx_led *led) static int lp5523_led_brightness(struct lp55xx_led *led)
{ {
struct lp55xx_chip *chip = led->chip; struct lp55xx_chip *chip = led->chip;
...@@ -858,6 +877,7 @@ static struct lp55xx_device_config lp5523_cfg = { ...@@ -858,6 +877,7 @@ static struct lp55xx_device_config lp5523_cfg = {
.max_channel = LP5523_MAX_LEDS, .max_channel = LP5523_MAX_LEDS,
.post_init_device = lp5523_post_init_device, .post_init_device = lp5523_post_init_device,
.brightness_fn = lp5523_led_brightness, .brightness_fn = lp5523_led_brightness,
.multicolor_brightness_fn = lp5523_multicolor_brightness,
.set_led_current = lp5523_set_led_current, .set_led_current = lp5523_set_led_current,
.firmware_cb = lp5523_firmware_loaded, .firmware_cb = lp5523_firmware_loaded,
.run_engine = lp5523_run_engine, .run_engine = lp5523_run_engine,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment