Commit 40502074 authored by Hans de Goede's avatar Hans de Goede Committed by Benjamin Tissoires

HID: ite: Add USB id match for another ITE based keyboard rfkill key quirk

The 258a:6a88 keyboard-dock shipped with the Prowise PT301 tablet is
likely another ITE based design. The controller die is directly bonded
to the PCB with a blob of black glue on top so there are no markings and
the 258a vendor-id used is unknown anywhere. But the keyboard has the
exact same hotkeys mapped to Fn+F1 - F10 as the other ITE8595 keyboard
I have *and* it has the same quirky behavior wrt the rfkill hotkey.

Either way as said this keyboard has the same quirk for its rfkill /
airplane mode hotkey as the ITE 8595 chip, it only sends a single release
event when pressed and released, it never sends a press event.

This commit adds the 258a:6a88 USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarBenjamin Tissoires <benjamin.tissoires@redhat.com>
parent ffe0e7cf
...@@ -17,6 +17,9 @@ ...@@ -17,6 +17,9 @@
#ifndef HID_IDS_H_FILE #ifndef HID_IDS_H_FILE
#define HID_IDS_H_FILE #define HID_IDS_H_FILE
#define USB_VENDOR_ID_258A 0x258a
#define USB_DEVICE_ID_258A_6A88 0x6a88
#define USB_VENDOR_ID_3M 0x0596 #define USB_VENDOR_ID_3M 0x0596
#define USB_DEVICE_ID_3M1968 0x0500 #define USB_DEVICE_ID_3M1968 0x0500
#define USB_DEVICE_ID_3M2256 0x0502 #define USB_DEVICE_ID_3M2256 0x0502
......
...@@ -42,6 +42,7 @@ static int ite_event(struct hid_device *hdev, struct hid_field *field, ...@@ -42,6 +42,7 @@ static int ite_event(struct hid_device *hdev, struct hid_field *field,
static const struct hid_device_id ite_devices[] = { static const struct hid_device_id ite_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ITE, USB_DEVICE_ID_ITE8595) }, { HID_USB_DEVICE(USB_VENDOR_ID_ITE, USB_DEVICE_ID_ITE8595) },
{ HID_USB_DEVICE(USB_VENDOR_ID_258A, USB_DEVICE_ID_258A_6A88) },
{ } { }
}; };
MODULE_DEVICE_TABLE(hid, ite_devices); MODULE_DEVICE_TABLE(hid, ite_devices);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment