Commit 40acc052 authored by Vadym Kochan's avatar Vadym Kochan Committed by David S. Miller

dt-bindings: marvell,prestera: Add description for device-tree bindings

Add brief description how to configure base mac address binding in
device-tree.

Describe requirement for the PCI port which is connected to the ASIC, to
allow access to the firmware related registers.
Signed-off-by: default avatarVadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e1189d9a
......@@ -45,3 +45,37 @@ dfx-server {
ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
};
Marvell Prestera SwitchDev bindings
-----------------------------------
Optional properties:
- compatible: must be "marvell,prestera"
- base-mac-provider: describes handle to node which provides base mac address,
might be a static base mac address or nvme cell provider.
Example:
eeprom_mac_addr: eeprom-mac-addr {
compatible = "eeprom,mac-addr-cell";
status = "okay";
nvmem = <&eeprom_at24>;
};
prestera {
compatible = "marvell,prestera";
status = "okay";
base-mac-provider = <&eeprom_mac_addr>;
};
The current implementation of Prestera Switchdev PCI interface driver requires
that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range:
&cp0_pcie0 {
ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000
0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000
0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>;
phys = <&cp0_comphy0 0>;
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment