Commit 40b1df3a authored by Linus Torvalds's avatar Linus Torvalds

v2.5.0.3 -> v2.5.0.4

- Jens Axboe: fix up bio highmem breakage, more cleanups
- Greg KH: USB update
parent 4d6c7b36
...@@ -110,6 +110,7 @@ APISOURCES := $(TOPDIR)/drivers/media/video/videodev.c \ ...@@ -110,6 +110,7 @@ APISOURCES := $(TOPDIR)/drivers/media/video/videodev.c \
$(TOPDIR)/fs/locks.c \ $(TOPDIR)/fs/locks.c \
$(TOPDIR)/fs/bio.c \ $(TOPDIR)/fs/bio.c \
$(TOPDIR)/include/asm-i386/bitops.h \ $(TOPDIR)/include/asm-i386/bitops.h \
$(TOPDIR)/include/linux/usb.h \
$(TOPDIR)/kernel/pm.c \ $(TOPDIR)/kernel/pm.c \
$(TOPDIR)/kernel/ksyms.c \ $(TOPDIR)/kernel/ksyms.c \
$(TOPDIR)/kernel/kmod.c \ $(TOPDIR)/kernel/kmod.c \
......
...@@ -204,8 +204,83 @@ ...@@ -204,8 +204,83 @@
</chapter> </chapter>
<chapter id="usb"> <chapter id="usb">
<title>USB Devices</title> <title>USB Devices</title>
<para>Drivers for USB devices talk to the "usbcore" APIs, and are
exposed through driver frameworks such as block, character,
or network devices.
There are two types of public "usbcore" APIs: those intended for
general driver use, and those which are only public to drivers that
are part of the core.
The drivers that are part of the core are involved in managing a USB bus.
They include the "hub" driver, which manages trees of USB devices, and
several different kinds of "host controller" driver (HCD), which control
individual busses.
</para>
<para>The device model seen by USB drivers is relatively complex.
</para>
<itemizedlist>
<listitem><para>USB supports four kinds of data transfer
(control, bulk, interrupt, and isochronous). Two transfer
types use bandwidth as it's available (control and bulk),
while the other two types of transfer (interrupt and isochronous)
are scheduled to provide guaranteed bandwidth.
</para></listitem>
<listitem><para>The device description model includes one or more
"configurations" per device, only one of which is active at a time.
</para></listitem>
<listitem><para>Configurations have one or more "interface", each
of which may have "alternate settings". Interfaces may be
standardized by USB "Class" specifications, or may be specific to
a vendor or device.</para>
<para>USB device drivers actually bind to interfaces, not devices.
Think of them as "interface drivers", though you
may not see many devices where the distinction is important.
Most USB devices are simple, with only one configuration,
one interface, and one alternate setting.
</para></listitem>
<listitem><para>Interfaces have one or more "endpoints", each of
which supports one type and direction of data transfer such as
"bulk out" or "interrupt in". The entire configuration may have
up to sixteen endpoints in each direction, allocated as needed
among all the interfaces.
</para></listitem>
<listitem><para>Data transfer on USB is packetized; each endpoint
has a maximum packet size.
Drivers must often be aware of conventions such as flagging the end
of bulk transfers using "short" (including zero length) packets.
</para></listitem>
<listitem><para>The Linux USB API supports synchronous calls for
control and bulk messaging.
It also supports asynchnous calls for all kinds of data transfer,
using request structures called "URBs" (USB Request Blocks).
</para></listitem>
</itemizedlist>
<para>Accordingly, the USB Core API exposed to device drivers
covers quite a lot of territory. You'll probably need to consult
the USB 2.0 specification, available online from www.usb.org at
no cost, as well as class or device specifications.
</para>
<sect1><title>Data Types and Macros</title>
!Iinclude/linux/usb.h
</sect1>
<sect1><title>USB Core APIs</title>
!Edrivers/usb/usb.c !Edrivers/usb/usb.c
</sect1>
</chapter> </chapter>
<chapter id="uart16x50"> <chapter id="uart16x50">
......
...@@ -58,6 +58,10 @@ where: ...@@ -58,6 +58,10 @@ where:
get enabled unless you set this parameter to 1. get enabled unless you set this parameter to 1.
Do not use this option unless it's actually necessary, Do not use this option unless it's actually necessary,
some Vaio models don't deal well with this option. some Vaio models don't deal well with this option.
This option is available only if the kernel is
compiled without ACPI support (since it conflicts
with it and it shouldn't be required anyway if
ACPI is already enabled).
verbose: print unknown events from the sonypi device verbose: print unknown events from the sonypi device
...@@ -93,7 +97,10 @@ Bugs: ...@@ -93,7 +97,10 @@ Bugs:
- some users reported that the laptop speed is lower (dhrystone - some users reported that the laptop speed is lower (dhrystone
tested) when using the driver with the fnkeyinit parameter. I cannot tested) when using the driver with the fnkeyinit parameter. I cannot
reproduce it on my laptop and not all users have this problem. reproduce it on my laptop and not all users have this problem.
Still under investigation. This happens because the fnkeyinit parameter enables the ACPI
mode (but without additionnal ACPI control, like processor
speed handling etc). Use ACPI instead of APM if it works on your
laptop.
- since all development was done by reverse engineering, there is - since all development was done by reverse engineering, there is
_absolutely no guarantee_ that this driver will not crash your _absolutely no guarantee_ that this driver will not crash your
......
VERSION = 2 VERSION = 2
PATCHLEVEL = 5 PATCHLEVEL = 5
SUBLEVEL = 1 SUBLEVEL = 1
EXTRAVERSION =-pre3 EXTRAVERSION =-pre4
KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
......
...@@ -98,7 +98,7 @@ inline int elv_rq_merge_ok(request_queue_t *q, struct request *rq, ...@@ -98,7 +98,7 @@ inline int elv_rq_merge_ok(request_queue_t *q, struct request *rq,
{ {
if (bio_data_dir(bio) == rq->cmd) { if (bio_data_dir(bio) == rq->cmd) {
if (rq->rq_dev == bio->bi_dev && !rq->waiting if (rq->rq_dev == bio->bi_dev && !rq->waiting
&& !rq->special && rq->inactive && rq->q == q) && !rq->special && rq->inactive)
return 1; return 1;
} }
......
...@@ -2437,16 +2437,15 @@ static int buffer_chain_size(void) ...@@ -2437,16 +2437,15 @@ static int buffer_chain_size(void)
char *base; char *base;
base = CURRENT->buffer; base = CURRENT->buffer;
size = CURRENT->current_nr_sectors << 9; size = 0;
bio = CURRENT->bio;
if (bio){ rq_for_each_bio(bio, CURRENT) {
bio = bio->bi_next; if (bio_data(bio) != base + size)
while (bio && bio_data(bio) == base + size){ break;
size += bio_size(bio);
bio = bio->bi_next; size += bio->bi_size;
}
} }
return size >> 9; return size >> 9;
} }
...@@ -2543,7 +2542,7 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2) ...@@ -2543,7 +2542,7 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
break; break;
} }
#endif #endif
size = bio_size(bio); size = bio->bi_size;;
buffer = bio_data(bio); buffer = bio_data(bio);
} }
#ifdef FLOPPY_SANITY_CHECK #ifdef FLOPPY_SANITY_CHECK
......
...@@ -303,10 +303,7 @@ int blk_rq_map_sg(request_queue_t *q, struct request *rq, struct scatterlist *sg ...@@ -303,10 +303,7 @@ int blk_rq_map_sg(request_queue_t *q, struct request *rq, struct scatterlist *sg
BIO_BUG_ON(i > bio->bi_vcnt); BIO_BUG_ON(i > bio->bi_vcnt);
if (!cluster) if (cluster && bvec_to_phys(bvec) == lastend) {
goto new_segment;
if (bvec_to_phys(bvec) == lastend) {
if (sg[nsegs - 1].length + nbytes > q->max_segment_size) if (sg[nsegs - 1].length + nbytes > q->max_segment_size)
goto new_segment; goto new_segment;
...@@ -1135,7 +1132,7 @@ int submit_bio(int rw, struct bio *bio) ...@@ -1135,7 +1132,7 @@ int submit_bio(int rw, struct bio *bio)
BUG_ON(!bio->bi_end_io); BUG_ON(!bio->bi_end_io);
BIO_BUG_ON(bio_offset(bio) > PAGE_SIZE); BIO_BUG_ON(bio_offset(bio) > PAGE_SIZE);
BIO_BUG_ON(!bio_size(bio)); BIO_BUG_ON(!bio->bi_size);
BIO_BUG_ON(!bio->bi_io_vec); BIO_BUG_ON(!bio->bi_io_vec);
bio->bi_rw = rw; bio->bi_rw = rw;
...@@ -1172,11 +1169,7 @@ int submit_bh(int rw, struct buffer_head * bh) ...@@ -1172,11 +1169,7 @@ int submit_bh(int rw, struct buffer_head * bh)
bio = bio_alloc(GFP_NOIO, 1); bio = bio_alloc(GFP_NOIO, 1);
bio->bi_sector = bh->b_blocknr * (bh->b_size >> 9); bio->bi_sector = bh->b_blocknr * (bh->b_size >> 9);
bio->bi_next = NULL;
bio->bi_dev = bh->b_dev; bio->bi_dev = bh->b_dev;
bio->bi_private = bh;
bio->bi_end_io = end_bio_bh_io_sync;
bio->bi_io_vec[0].bv_page = bh->b_page; bio->bi_io_vec[0].bv_page = bh->b_page;
bio->bi_io_vec[0].bv_len = bh->b_size; bio->bi_io_vec[0].bv_len = bh->b_size;
bio->bi_io_vec[0].bv_offset = bh_offset(bh); bio->bi_io_vec[0].bv_offset = bh_offset(bh);
...@@ -1185,6 +1178,9 @@ int submit_bh(int rw, struct buffer_head * bh) ...@@ -1185,6 +1178,9 @@ int submit_bh(int rw, struct buffer_head * bh)
bio->bi_idx = 0; bio->bi_idx = 0;
bio->bi_size = bh->b_size; bio->bi_size = bh->b_size;
bio->bi_end_io = end_bio_bh_io_sync;
bio->bi_private = bh;
return submit_bio(rw, bio); return submit_bio(rw, bio);
} }
......
...@@ -182,7 +182,7 @@ static int lo_send(struct loop_device *lo, struct bio *bio, int bsize, loff_t po ...@@ -182,7 +182,7 @@ static int lo_send(struct loop_device *lo, struct bio *bio, int bsize, loff_t po
down(&mapping->host->i_sem); down(&mapping->host->i_sem);
index = pos >> PAGE_CACHE_SHIFT; index = pos >> PAGE_CACHE_SHIFT;
offset = pos & (PAGE_CACHE_SIZE - 1); offset = pos & (PAGE_CACHE_SIZE - 1);
len = bio_size(bio); len = bio->bi_size;
data = bio_data(bio); data = bio_data(bio);
while (len > 0) { while (len > 0) {
int IV = index * (PAGE_CACHE_SIZE/bsize) + offset/bsize; int IV = index * (PAGE_CACHE_SIZE/bsize) + offset/bsize;
...@@ -272,7 +272,7 @@ static int lo_receive(struct loop_device *lo, struct bio *bio, int bsize, loff_t ...@@ -272,7 +272,7 @@ static int lo_receive(struct loop_device *lo, struct bio *bio, int bsize, loff_t
cookie.data = bio_data(bio); cookie.data = bio_data(bio);
cookie.bsize = bsize; cookie.bsize = bsize;
desc.written = 0; desc.written = 0;
desc.count = bio_size(bio); desc.count = bio->bi_size;
desc.buf = (char*)&cookie; desc.buf = (char*)&cookie;
desc.error = 0; desc.error = 0;
spin_lock_irq(&lo->lo_lock); spin_lock_irq(&lo->lo_lock);
...@@ -470,7 +470,7 @@ static int loop_make_request(request_queue_t *q, struct bio *rbh) ...@@ -470,7 +470,7 @@ static int loop_make_request(request_queue_t *q, struct bio *rbh)
IV = loop_get_iv(lo, rbh->bi_sector); IV = loop_get_iv(lo, rbh->bi_sector);
if (rw == WRITE) { if (rw == WRITE) {
if (lo_do_transfer(lo, WRITE, bio_data(bh), bio_data(rbh), if (lo_do_transfer(lo, WRITE, bio_data(bh), bio_data(rbh),
bio_size(bh), IV)) bh->bi_size, IV))
goto err; goto err;
} }
...@@ -504,7 +504,7 @@ static inline void loop_handle_bio(struct loop_device *lo, struct bio *bio) ...@@ -504,7 +504,7 @@ static inline void loop_handle_bio(struct loop_device *lo, struct bio *bio)
unsigned long IV = loop_get_iv(lo, rbh->bi_sector); unsigned long IV = loop_get_iv(lo, rbh->bi_sector);
ret = lo_do_transfer(lo, READ, bio_data(bio), bio_data(rbh), ret = lo_do_transfer(lo, READ, bio_data(bio), bio_data(rbh),
bio_size(bio), IV); bio->bi_size, IV);
bio_endio(rbh, !ret, bio_sectors(bio)); bio_endio(rbh, !ret, bio_sectors(bio));
loop_put_buffer(bio); loop_put_buffer(bio);
......
...@@ -168,7 +168,7 @@ void nbd_send_req(struct socket *sock, struct request *req) ...@@ -168,7 +168,7 @@ void nbd_send_req(struct socket *sock, struct request *req)
struct bio *bio = req->bio; struct bio *bio = req->bio;
DEBUG("data, "); DEBUG("data, ");
do { do {
result = nbd_xmit(1, sock, bio_data(bio), bio_size(bio), bio->bi_next == NULL ? 0 : MSG_MORE); result = nbd_xmit(1, sock, bio_data(bio), bio->bi_size, bio->bi_next == NULL ? 0 : MSG_MORE);
if (result <= 0) if (result <= 0)
FAIL("Send data failed."); FAIL("Send data failed.");
bio = bio->bi_next; bio = bio->bi_next;
...@@ -208,7 +208,7 @@ struct request *nbd_read_stat(struct nbd_device *lo) ...@@ -208,7 +208,7 @@ struct request *nbd_read_stat(struct nbd_device *lo)
struct bio *bio = req->bio; struct bio *bio = req->bio;
DEBUG("data, "); DEBUG("data, ");
do { do {
result = nbd_xmit(0, lo->sock, bio_data(bio), bio_size(bio), MSG_WAITALL); result = nbd_xmit(0, lo->sock, bio_data(bio), bio->bi_size, MSG_WAITALL);
if (result <= 0) if (result <= 0)
HARDFAIL("Recv data failed."); HARDFAIL("Recv data failed.");
bio = bio->bi_next; bio = bio->bi_next;
......
...@@ -409,13 +409,13 @@ static int initrd_release(struct inode *inode,struct file *file) ...@@ -409,13 +409,13 @@ static int initrd_release(struct inode *inode,struct file *file)
{ {
extern void free_initrd_mem(unsigned long, unsigned long); extern void free_initrd_mem(unsigned long, unsigned long);
spin_lock( &initrd_users_lock ); spin_lock(&initrd_users_lock);
if (!--initrd_users) { if (!--initrd_users) {
spin_unlock( &initrd_users_lock ); spin_unlock(&initrd_users_lock);
free_initrd_mem(initrd_start, initrd_end); free_initrd_mem(initrd_start, initrd_end);
initrd_start = 0; initrd_start = 0;
} else { } else {
spin_unlock( &initrd_users_lock ); spin_unlock(&initrd_users_lock);
} }
blkdev_put(inode->i_bdev, BDEV_FILE); blkdev_put(inode->i_bdev, BDEV_FILE);
...@@ -437,9 +437,9 @@ static int rd_open(struct inode * inode, struct file * filp) ...@@ -437,9 +437,9 @@ static int rd_open(struct inode * inode, struct file * filp)
#ifdef CONFIG_BLK_DEV_INITRD #ifdef CONFIG_BLK_DEV_INITRD
if (unit == INITRD_MINOR) { if (unit == INITRD_MINOR) {
if (!initrd_start) return -ENODEV;
spin_lock( &initrd_users_lock ); spin_lock( &initrd_users_lock );
initrd_users++; initrd_users++;
if (!initrd_start) return -ENODEV;
spin_unlock( &initrd_users_lock ); spin_unlock( &initrd_users_lock );
filp->f_op = &initrd_fops; filp->f_op = &initrd_fops;
return 0; return 0;
......
...@@ -68,8 +68,8 @@ static struct pc110pad_params current_params; ...@@ -68,8 +68,8 @@ static struct pc110pad_params current_params;
/* driver/filesystem interface management */ /* driver/filesystem interface management */
static wait_queue_head_t queue; static wait_queue_head_t queue;
static struct fasync_struct *asyncptr; static struct fasync_struct *asyncptr;
static active_count = 0; /* number of concurrent open()s */ static int active_count = 0; /* number of concurrent open()s */
static spinlock_t active_lock = SPIN_LOCK_UNLOCKED; static spinlock_t pc110_lock = SPIN_LOCK_UNLOCKED;
/* this lock should be held when referencing active_count */ /* this lock should be held when referencing active_count */
static struct semaphore reader_lock; static struct semaphore reader_lock;
...@@ -482,15 +482,14 @@ static void sample_debug(int d[3]) ...@@ -482,15 +482,14 @@ static void sample_debug(int d[3])
int thisd, thisdd, thisx, thisy; int thisd, thisdd, thisx, thisy;
int b; int b;
unsigned long flags; unsigned long flags;
save_flags(flags); spin_lock_irqsave(&pc110_lock, flags);
cli();
read_raw_pad(&thisd, &thisdd, &thisx, &thisy); read_raw_pad(&thisd, &thisdd, &thisx, &thisy);
d[0]=(thisd?0x80:0) | (thisdd?0x40:0) | bounce; d[0]=(thisd?0x80:0) | (thisdd?0x40:0) | bounce;
d[1]=(recent_transition?0x80:0)+transition_count; d[1]=(recent_transition?0x80:0)+transition_count;
read_button(&b); read_button(&b);
d[2]=(synthesize_tap<<4) | (b?0x01:0); d[2]=(synthesize_tap<<4) | (b?0x01:0);
restore_flags(flags); spin_unlock_irqrestore(&pc110_lock, flags);
} }
/** /**
...@@ -586,11 +585,12 @@ static int fasync_pad(int fd, struct file *filp, int on) ...@@ -586,11 +585,12 @@ static int fasync_pad(int fd, struct file *filp, int on)
static int close_pad(struct inode * inode, struct file * file) static int close_pad(struct inode * inode, struct file * file)
{ {
unsigned long flags;
fasync_pad(-1, file, 0); fasync_pad(-1, file, 0);
spin_lock( &active_lock ); spin_lock_irqsave(&pc110_lock, flags);
if (!--active_count) if (!--active_count)
outb(0x30, current_params.io+2); /* switch off digitiser */ outb(0x30, current_params.io+2); /* switch off digitiser */
spin_unlock( &active_lock ); spin_unlock_irqrestore(&active_lock, flags);
return 0; return 0;
} }
...@@ -610,16 +610,13 @@ static int open_pad(struct inode * inode, struct file * file) ...@@ -610,16 +610,13 @@ static int open_pad(struct inode * inode, struct file * file)
{ {
unsigned long flags; unsigned long flags;
spin_lock( &active_lock ); spin_lock_irqsave(&pc110_lock, flags);
if (active_count++) if (active_count++)
{ {
spin_unlock( &active_lock ); spin_unlock_irqrestore(&pc110_lock, flags);
return 0; return 0;
} }
spin_unlock( &active_lock );
save_flags(flags);
cli();
outb(0x30, current_params.io+2); /* switch off digitiser */ outb(0x30, current_params.io+2); /* switch off digitiser */
pad_irq(0,0,0); /* read to flush any pending bytes */ pad_irq(0,0,0); /* read to flush any pending bytes */
pad_irq(0,0,0); /* read to flush any pending bytes */ pad_irq(0,0,0); /* read to flush any pending bytes */
...@@ -634,7 +631,7 @@ static int open_pad(struct inode * inode, struct file * file) ...@@ -634,7 +631,7 @@ static int open_pad(struct inode * inode, struct file * file)
synthesize_tap=0; synthesize_tap=0;
del_timer(&bounce_timer); del_timer(&bounce_timer);
del_timer(&tap_timer); del_timer(&tap_timer);
restore_flags(flags); spin_unlock_irqrestore(&pc110_lock, flags);
return 0; return 0;
} }
......
...@@ -406,7 +406,7 @@ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data) ...@@ -406,7 +406,7 @@ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
if (rqst == PM_RESUME) { if (rqst == PM_RESUME) {
if (queue) { /* Aux port detected */ if (queue) { /* Aux port detected */
spin_lock_irqsave( &aux_count_lock, flags); spin_lock_irqsave(&aux_count_lock, flags);
if ( aux_count == 0) { /* Mouse not in use */ if ( aux_count == 0) { /* Mouse not in use */
spin_lock(&kbd_controller_lock); spin_lock(&kbd_controller_lock);
/* /*
...@@ -420,9 +420,9 @@ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data) ...@@ -420,9 +420,9 @@ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
kbd_write_command(KBD_CCMD_WRITE_MODE); kbd_write_command(KBD_CCMD_WRITE_MODE);
kb_wait(); kb_wait();
kbd_write_output(AUX_INTS_OFF); kbd_write_output(AUX_INTS_OFF);
spin_unlock(&kbd_controller_lock, flags); spin_unlock(&kbd_controller_lock);
} }
spin_unlock_irqrestore( &aux_count_lock,flags ); spin_unlock_irqrestore(&aux_count_lock, flags);
} }
} }
#endif #endif
...@@ -433,7 +433,7 @@ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data) ...@@ -433,7 +433,7 @@ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
static inline void handle_mouse_event(unsigned char scancode) static inline void handle_mouse_event(unsigned char scancode)
{ {
#ifdef CONFIG_PSMOUSE #ifdef CONFIG_PSMOUSE
int flags; unsigned long flags;
static unsigned char prev_code; static unsigned char prev_code;
if (mouse_reply_expected) { if (mouse_reply_expected) {
if (scancode == AUX_ACK) { if (scancode == AUX_ACK) {
...@@ -452,7 +452,7 @@ static inline void handle_mouse_event(unsigned char scancode) ...@@ -452,7 +452,7 @@ static inline void handle_mouse_event(unsigned char scancode)
prev_code = scancode; prev_code = scancode;
add_mouse_randomness(scancode); add_mouse_randomness(scancode);
spin_lock_irqsave( &aux_count_lock, flags); spin_lock_irqsave(&aux_count_lock, flags);
if ( aux_count ) { if ( aux_count ) {
int head = queue->head; int head = queue->head;
...@@ -464,7 +464,7 @@ static inline void handle_mouse_event(unsigned char scancode) ...@@ -464,7 +464,7 @@ static inline void handle_mouse_event(unsigned char scancode)
wake_up_interruptible(&queue->proc_list); wake_up_interruptible(&queue->proc_list);
} }
} }
spin_unlock_irqrestore( &aux_count_lock, flags); spin_unlock_irqrestore(&aux_count_lock, flags);
#endif #endif
} }
...@@ -1052,14 +1052,14 @@ static int fasync_aux(int fd, struct file *filp, int on) ...@@ -1052,14 +1052,14 @@ static int fasync_aux(int fd, struct file *filp, int on)
static int release_aux(struct inode * inode, struct file * file) static int release_aux(struct inode * inode, struct file * file)
{ {
int flags; unsigned long flags;
fasync_aux(-1, file, 0); fasync_aux(-1, file, 0);
spin_lock_irqsave( &aux_count, flags ); spin_lock_irqsave(&aux_count_lock, flags);
if ( --aux_count ) { if ( --aux_count ) {
spin_unlock_irqrestore( &aux_count_lock ); spin_unlock_irqrestore(&aux_count_lock, flags);
return 0; return 0;
} }
spin_unlock_irqrestore( &aux_count_lock, flags ); spin_unlock_irqrestore(&aux_count_lock, flags);
kbd_write_cmd(AUX_INTS_OFF); /* Disable controller ints */ kbd_write_cmd(AUX_INTS_OFF); /* Disable controller ints */
kbd_write_command_w(KBD_CCMD_MOUSE_DISABLE); kbd_write_command_w(KBD_CCMD_MOUSE_DISABLE);
aux_free_irq(AUX_DEV); aux_free_irq(AUX_DEV);
...@@ -1073,16 +1073,16 @@ static int release_aux(struct inode * inode, struct file * file) ...@@ -1073,16 +1073,16 @@ static int release_aux(struct inode * inode, struct file * file)
static int open_aux(struct inode * inode, struct file * file) static int open_aux(struct inode * inode, struct file * file)
{ {
int flags; unsigned long flags;
spin_lock_irqsave( &aux_count_lock, flags ); spin_lock_irqsave(&aux_count_lock, flags);
if ( aux_count++ ) { if ( aux_count++ ) {
spin_unlock_irqrestore( &aux_count_lock ); spin_unlock_irqrestore(&aux_count_lock, flags);
return 0; return 0;
} }
queue->head = queue->tail = 0; /* Flush input queue */ queue->head = queue->tail = 0; /* Flush input queue */
if (aux_request_irq(keyboard_interrupt, AUX_DEV)) { if (aux_request_irq(keyboard_interrupt, AUX_DEV)) {
aux_count--; aux_count--;
spin_unlock_irqrestore( &aux_count_lock, flags ); spin_unlock_irqrestore(&aux_count_lock, flags);
return -EBUSY; return -EBUSY;
} }
kbd_write_command_w(KBD_CCMD_MOUSE_ENABLE); /* Enable the kbd_write_command_w(KBD_CCMD_MOUSE_ENABLE); /* Enable the
...@@ -1094,7 +1094,7 @@ static int open_aux(struct inode * inode, struct file * file) ...@@ -1094,7 +1094,7 @@ static int open_aux(struct inode * inode, struct file * file)
mdelay(2); /* Ensure we follow the kbc access delay rules.. */ mdelay(2); /* Ensure we follow the kbc access delay rules.. */
send_data(KBD_CMD_ENABLE); /* try to workaround toshiba4030cdt problem */ send_data(KBD_CMD_ENABLE); /* try to workaround toshiba4030cdt problem */
spin_unlock_irqrestore( &aux_count_lock, flags ); spin_unlock_irqrestore(&aux_count_lock, flags);
return 0; return 0;
} }
......
...@@ -617,8 +617,11 @@ static int __devinit sonypi_probe(struct pci_dev *pcidev) { ...@@ -617,8 +617,11 @@ static int __devinit sonypi_probe(struct pci_dev *pcidev) {
goto out3; goto out3;
} }
#if !defined(CONFIG_ACPI)
/* Enable ACPI mode to get Fn key events */
if (fnkeyinit) if (fnkeyinit)
outb(0xf0, 0xb2); outb(0xf0, 0xb2);
#endif
if (sonypi_device.model == SONYPI_DEVICE_MODEL_TYPE2) if (sonypi_device.model == SONYPI_DEVICE_MODEL_TYPE2)
sonypi_type2_srs(); sonypi_type2_srs();
...@@ -666,6 +669,11 @@ static void __devexit sonypi_remove(void) { ...@@ -666,6 +669,11 @@ static void __devexit sonypi_remove(void) {
sonypi_type2_dis(); sonypi_type2_dis();
else else
sonypi_type1_dis(); sonypi_type1_dis();
#if !defined(CONFIG_ACPI)
/* disable ACPI mode */
if (fnkeyinit)
outb(0xf1, 0xb2);
#endif
free_irq(sonypi_device.irq, sonypi_irq); free_irq(sonypi_device.irq, sonypi_irq);
release_region(sonypi_device.ioport1, sonypi_device.region_size); release_region(sonypi_device.ioport1, sonypi_device.region_size);
misc_deregister(&sonypi_misc_device); misc_deregister(&sonypi_misc_device);
......
...@@ -35,7 +35,7 @@ ...@@ -35,7 +35,7 @@
#ifdef __KERNEL__ #ifdef __KERNEL__
#define SONYPI_DRIVER_MAJORVERSION 1 #define SONYPI_DRIVER_MAJORVERSION 1
#define SONYPI_DRIVER_MINORVERSION 7 #define SONYPI_DRIVER_MINORVERSION 8
#include <linux/types.h> #include <linux/types.h>
#include <linux/pci.h> #include <linux/pci.h>
......
...@@ -50,7 +50,7 @@ ...@@ -50,7 +50,7 @@
#include <linux/reboot.h> #include <linux/reboot.h>
#include <linux/init.h> #include <linux/init.h>
static int wdt_is_open; static unsigned long wdt_is_open;
/* /*
* You must set these - there is no sane way to probe for this board. * You must set these - there is no sane way to probe for this board.
...@@ -337,13 +337,12 @@ static int wdt_open(struct inode *inode, struct file *file) ...@@ -337,13 +337,12 @@ static int wdt_open(struct inode *inode, struct file *file)
switch(MINOR(inode->i_rdev)) switch(MINOR(inode->i_rdev))
{ {
case WATCHDOG_MINOR: case WATCHDOG_MINOR:
if(wdt_is_open) if(test_and_set_bit(0, &wdt_is_open))
return -EBUSY; return -EBUSY;
/* /*
* Activate * Activate
*/ */
wdt_is_open=1;
inb_p(WDT_DC); /* Disable */ inb_p(WDT_DC); /* Disable */
wdt_ctr_mode(0,3); wdt_ctr_mode(0,3);
wdt_ctr_mode(1,2); wdt_ctr_mode(1,2);
...@@ -380,7 +379,7 @@ static int wdt_release(struct inode *inode, struct file *file) ...@@ -380,7 +379,7 @@ static int wdt_release(struct inode *inode, struct file *file)
inb_p(WDT_DC); /* Disable counters */ inb_p(WDT_DC); /* Disable counters */
wdt_ctr_load(2,0); /* 0 length reset pulses now */ wdt_ctr_load(2,0); /* 0 length reset pulses now */
#endif #endif
wdt_is_open=0; clear_bit(0, &wdt_is_open);
} }
return 0; return 0;
} }
......
...@@ -71,7 +71,7 @@ ...@@ -71,7 +71,7 @@
#define PCI_DEVICE_ID_WDG_CSM 0x22c0 #define PCI_DEVICE_ID_WDG_CSM 0x22c0
#endif #endif
static int wdt_is_open; static unsigned long wdt_is_open;
/* /*
* You must set these - there is no sane way to probe for this board. * You must set these - there is no sane way to probe for this board.
......
...@@ -1246,8 +1246,6 @@ static int lvm_map(struct bio *bh) ...@@ -1246,8 +1246,6 @@ static int lvm_map(struct bio *bh)
} }
out: out:
if (test_bit(BIO_HASHED, &bh->bi_flags))
BUG();
bh->bi_dev = rdev_map; bh->bi_dev = rdev_map;
bh->bi_sector = rsector_map; bh->bi_sector = rsector_map;
up_read(&lv->lv_lock); up_read(&lv->lv_lock);
......
...@@ -287,8 +287,8 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq, ...@@ -287,8 +287,8 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq,
while(bio) while(bio)
{ {
if (bio_to_phys(bio) == last) { if (bio_to_phys(bio) == last) {
size += bio_size(bio); size += bio->bi_size;
last += bio_size(bio); last += bio->bi_size;
if(bio->bi_next) if(bio->bi_next)
__raw_writel(0x14000000|(size), mptr-8); __raw_writel(0x14000000|(size), mptr-8);
else else
...@@ -297,16 +297,16 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq, ...@@ -297,16 +297,16 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq,
else else
{ {
if(bio->bi_next) if(bio->bi_next)
__raw_writel(0x10000000|bio_size(bio), mptr); __raw_writel(0x10000000|bio->bi_size, mptr);
else else
__raw_writel(0xD0000000|bio_size(bio), mptr); __raw_writel(0xD0000000|bio->bi_size, mptr);
__raw_writel(bio_to_phys(bio), mptr+4); __raw_writel(bio_to_phys(bio), mptr+4);
mptr += 8; mptr += 8;
size = bio_size(bio); size = bio->bi_size;
last = bio_to_phys(bio) + bio_size(bio); last = bio_to_phys(bio) + bio->bi_size;
} }
count -= bio_size(bio); count -= bio->bi_size;
bio = bio->bi_next; bio = bio->bi_next;
} }
/* /*
...@@ -326,8 +326,8 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq, ...@@ -326,8 +326,8 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq,
while(bio) while(bio)
{ {
if (bio_to_phys(bio) == last) { if (bio_to_phys(bio) == last) {
size += bio_size(bio); size += bio->bi_size;
last += bio_size(bio); last += bio->bi_size;
if(bio->bi_next) if(bio->bi_next)
__raw_writel(0x14000000|(size), mptr-8); __raw_writel(0x14000000|(size), mptr-8);
else else
...@@ -336,16 +336,16 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq, ...@@ -336,16 +336,16 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq,
else else
{ {
if(bio->bi_next) if(bio->bi_next)
__raw_writel(0x14000000|bio_size(bio), mptr); __raw_writel(0x14000000|bio->bi_size, mptr);
else else
__raw_writel(0xD4000000|bio_size(bio), mptr); __raw_writel(0xD4000000|bio->bi_size, mptr);
__raw_writel(bio_to_phys(bio), mptr+4); __raw_writel(bio_to_phys(bio), mptr+4);
mptr += 8; mptr += 8;
size = bio_size(bio); size = bio->bi_size;
last = bio_to_phys(bio) + bio_size(bio); last = bio_to_phys(bio) + bio->bi_size;
} }
count -= bio_size(bio); count -= bio->bi_size;
bio = bio->bi_next; bio = bio->bi_next;
} }
......
...@@ -49,7 +49,7 @@ int aha152x_proc_info(char *buffer, char **start, off_t offset, int length, int ...@@ -49,7 +49,7 @@ int aha152x_proc_info(char *buffer, char **start, off_t offset, int length, int
cmd_per_lun: 1, \ cmd_per_lun: 1, \
present: 0, \ present: 0, \
unchecked_isa_dma: 0, \ unchecked_isa_dma: 0, \
use_clustering: DISABLE_CLUSTERING, \ use_clustering: DISABLE_CLUSTERING }
#endif #endif
......
...@@ -1059,7 +1059,7 @@ int gdth_eh_host_reset(Scsi_Cmnd *scp); ...@@ -1059,7 +1059,7 @@ int gdth_eh_host_reset(Scsi_Cmnd *scp);
cmd_per_lun: GDTH_MAXC_P_L, \ cmd_per_lun: GDTH_MAXC_P_L, \
present: 0, \ present: 0, \
unchecked_isa_dma: 1, \ unchecked_isa_dma: 1, \
use_clustering: ENABLE_CLUSTERING, \ use_clustering: ENABLE_CLUSTERING }
#elif LINUX_VERSION_CODE >= 0x02015F #elif LINUX_VERSION_CODE >= 0x02015F
int gdth_bios_param(Disk *,kdev_t,int *); int gdth_bios_param(Disk *,kdev_t,int *);
...@@ -1090,7 +1090,7 @@ int gdth_eh_host_reset(Scsi_Cmnd *scp); ...@@ -1090,7 +1090,7 @@ int gdth_eh_host_reset(Scsi_Cmnd *scp);
cmd_per_lun: GDTH_MAXC_P_L, \ cmd_per_lun: GDTH_MAXC_P_L, \
present: 0, \ present: 0, \
unchecked_isa_dma: 1, \ unchecked_isa_dma: 1, \
use_clustering: ENABLE_CLUSTERING, \ use_clustering: ENABLE_CLUSTERING }
#elif LINUX_VERSION_CODE >= 0x010300 #elif LINUX_VERSION_CODE >= 0x010300
int gdth_bios_param(Disk *,kdev_t,int *); int gdth_bios_param(Disk *,kdev_t,int *);
......
...@@ -34,7 +34,7 @@ extern int esp_reset(Scsi_Cmnd *, unsigned int); ...@@ -34,7 +34,7 @@ extern int esp_reset(Scsi_Cmnd *, unsigned int);
this_id: 7, \ this_id: 7, \
sg_tablesize: SG_ALL, \ sg_tablesize: SG_ALL, \
cmd_per_lun: 1, \ cmd_per_lun: 1, \
use_clustering: DISABLE_CLUSTERING, \ use_clustering: DISABLE_CLUSTERING }
#endif /* MAC_ESP_H */ #endif /* MAC_ESP_H */
...@@ -148,7 +148,7 @@ __inline static int __count_segments(struct request *req, ...@@ -148,7 +148,7 @@ __inline static int __count_segments(struct request *req,
*/ */
bio = req->bio; bio = req->bio;
#ifdef DMA_SEGMENT_SIZE_LIMITED #ifdef DMA_SEGMENT_SIZE_LIMITED
if (reqsize + bio_size(bio) > PAGE_SIZE) if (reqsize + bio->bi_size > PAGE_SIZE)
ret++; ret++;
#endif #endif
...@@ -156,7 +156,7 @@ __inline static int __count_segments(struct request *req, ...@@ -156,7 +156,7 @@ __inline static int __count_segments(struct request *req,
bio_for_each_segment(bvec, bio, i) bio_for_each_segment(bvec, bio, i)
ret++; ret++;
reqsize += bio_size(bio); reqsize += bio->bi_size;
} }
if (remainder) if (remainder)
...@@ -201,7 +201,7 @@ recount_segments(Scsi_Cmnd * SCpnt) ...@@ -201,7 +201,7 @@ recount_segments(Scsi_Cmnd * SCpnt)
} }
#define MERGEABLE_BUFFERS(X,Y) \ #define MERGEABLE_BUFFERS(X,Y) \
(((((long)bio_to_phys((X))+bio_size((X)))|((long)bio_to_phys((Y)))) & \ (((((long)bio_to_phys((X))+(X)->bi_size)|((long)bio_to_phys((Y)))) & \
(DMA_CHUNK_SIZE - 1)) == 0) (DMA_CHUNK_SIZE - 1)) == 0)
#ifdef DMA_CHUNK_SIZE #ifdef DMA_CHUNK_SIZE
...@@ -767,7 +767,7 @@ __inline static int __init_io(Scsi_Cmnd * SCpnt, ...@@ -767,7 +767,7 @@ __inline static int __init_io(Scsi_Cmnd * SCpnt,
* back and allocate a really small one - enough to satisfy * back and allocate a really small one - enough to satisfy
* the first buffer. * the first buffer.
*/ */
if (bio_to_phys(bio) + bio_size(bio) - 1 > ISA_DMA_THRESHOLD) { if (bio_to_phys(bio) + bio->bi_size - 1 > ISA_DMA_THRESHOLD) {
buff = (char *) scsi_malloc(this_count << 9); buff = (char *) scsi_malloc(this_count << 9);
if (!buff) { if (!buff) {
printk("Warning - running low on DMA memory\n"); printk("Warning - running low on DMA memory\n");
......
...@@ -37,7 +37,7 @@ int sim710_release(struct Scsi_Host *); ...@@ -37,7 +37,7 @@ int sim710_release(struct Scsi_Host *);
this_id: 7, \ this_id: 7, \
sg_tablesize: 128, \ sg_tablesize: 128, \
cmd_per_lun: 1, \ cmd_per_lun: 1, \
use_clustering: DISABLE_CLUSTERING, \ use_clustering: DISABLE_CLUSTERING }
#ifndef HOSTS_C #ifndef HOSTS_C
......
...@@ -224,7 +224,7 @@ static int dabusb_alloc_buffers (pdabusb_t s) ...@@ -224,7 +224,7 @@ static int dabusb_alloc_buffers (pdabusb_t s)
err("kmalloc(sizeof(buff_t))==NULL"); err("kmalloc(sizeof(buff_t))==NULL");
goto err; goto err;
} }
memset (b, sizeof (buff_t), 0); memset (b, 0, sizeof (buff_t));
b->s = s; b->s = s;
b->purb = usb_alloc_urb(packets); b->purb = usb_alloc_urb(packets);
if (!b->purb) { if (!b->purb) {
......
/* /*
* Belkin USB Serial Adapter Driver * Belkin USB Serial Adapter Driver
* *
* Copyright (C) 2000 * Copyright (C) 2000 William Greathouse (wgreathouse@smva.com)
* William Greathouse (wgreathouse@smva.com) * Copyright (C) 2000-2001 Greg Kroah-Hartman (greg@kroah.com)
* *
* This program is largely derived from work by the linux-usb group * This program is largely derived from work by the linux-usb group
* and associated source files. Please see the usb/serial files for * and associated source files. Please see the usb/serial files for
...@@ -24,6 +24,9 @@ ...@@ -24,6 +24,9 @@
* -- Add support for flush commands * -- Add support for flush commands
* -- Add everything that is missing :) * -- Add everything that is missing :)
* *
* 27-Nov-2001 gkh
* compressed all the differnent device entries into 1.
*
* 30-May-2001 gkh * 30-May-2001 gkh
* switched from using spinlock to a semaphore, which fixes lots of problems. * switched from using spinlock to a semaphore, which fixes lots of problems.
* *
...@@ -88,7 +91,7 @@ ...@@ -88,7 +91,7 @@
/* /*
* Version Information * Version Information
*/ */
#define DRIVER_VERSION "v1.1" #define DRIVER_VERSION "v1.2"
#define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>" #define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>"
#define DRIVER_DESC "USB Belkin Serial converter driver" #define DRIVER_DESC "USB Belkin Serial converter driver"
...@@ -112,125 +115,12 @@ static __devinitdata struct usb_device_id id_table_combined [] = { ...@@ -112,125 +115,12 @@ static __devinitdata struct usb_device_id id_table_combined [] = {
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
static __devinitdata struct usb_device_id belkin_dockstation_table [] = {
{ USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id belkin_sa_table [] = {
{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id belkin_old_table [] = {
{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id peracom_table [] = {
{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id gocom232_table [] = {
{ USB_DEVICE(GOHUBS_VID, GOHUBS_PID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table_combined); MODULE_DEVICE_TABLE (usb, id_table_combined);
/* All of the device info needed for the Belkin dockstation serial converter */ /* All of the device info needed for the serial converters */
static struct usb_serial_device_type belkin_dockstation_device = { static struct usb_serial_device_type belkin_device = {
name: "Belkin F5U120-PC USB Serial Adapter", name: "Belkin / Peracom / GoHubs USB Serial Adapter",
id_table: belkin_dockstation_table, /* the Belkin F5U103 device */ id_table: id_table_combined,
needs_interrupt_in: MUST_HAVE, /* this device must have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 1,
num_bulk_in: 1,
num_bulk_out: 1,
num_ports: 1,
open: belkin_sa_open,
close: belkin_sa_close,
read_int_callback: belkin_sa_read_int_callback, /* How we get the status info */
ioctl: belkin_sa_ioctl,
set_termios: belkin_sa_set_termios,
break_ctl: belkin_sa_break_ctl,
startup: belkin_sa_startup,
shutdown: belkin_sa_shutdown,
};
/* All of the device info needed for the Belkin serial converter */
static struct usb_serial_device_type belkin_sa_device = {
name: "Belkin F5U103 USB Serial Adapter",
id_table: belkin_sa_table, /* the Belkin F5U103 device */
needs_interrupt_in: MUST_HAVE, /* this device must have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 1,
num_bulk_in: 1,
num_bulk_out: 1,
num_ports: 1,
open: belkin_sa_open,
close: belkin_sa_close,
read_int_callback: belkin_sa_read_int_callback, /* How we get the status info */
ioctl: belkin_sa_ioctl,
set_termios: belkin_sa_set_termios,
break_ctl: belkin_sa_break_ctl,
startup: belkin_sa_startup,
shutdown: belkin_sa_shutdown,
};
/* This driver also supports the "old" school Belkin single port adaptor */
static struct usb_serial_device_type belkin_old_device = {
name: "Belkin USB Serial Adapter",
id_table: belkin_old_table, /* the old Belkin device */
needs_interrupt_in: MUST_HAVE, /* this device must have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 1,
num_bulk_in: 1,
num_bulk_out: 1,
num_ports: 1,
open: belkin_sa_open,
close: belkin_sa_close,
read_int_callback: belkin_sa_read_int_callback, /* How we get the status info */
ioctl: belkin_sa_ioctl,
set_termios: belkin_sa_set_termios,
break_ctl: belkin_sa_break_ctl,
startup: belkin_sa_startup,
shutdown: belkin_sa_shutdown,
};
/* this driver also works for the Peracom single port adapter */
static struct usb_serial_device_type peracom_device = {
name: "Peracom single port USB Serial Adapter",
id_table: peracom_table, /* the Peracom device */
needs_interrupt_in: MUST_HAVE, /* this device must have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 1,
num_bulk_in: 1,
num_bulk_out: 1,
num_ports: 1,
open: belkin_sa_open,
close: belkin_sa_close,
read_int_callback: belkin_sa_read_int_callback, /* How we get the status info */
ioctl: belkin_sa_ioctl,
set_termios: belkin_sa_set_termios,
break_ctl: belkin_sa_break_ctl,
startup: belkin_sa_startup,
shutdown: belkin_sa_shutdown,
};
/* the GoHubs Go-COM232 device is the same as the Peracom single port adapter */
static struct usb_serial_device_type gocom232_device = {
name: "GO-COM232 USB Serial Converter",
id_table: gocom232_table, /* the GO-COM232 device */
needs_interrupt_in: MUST_HAVE, /* this device must have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 1, num_interrupt_in: 1,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
...@@ -642,11 +532,7 @@ static int belkin_sa_ioctl (struct usb_serial_port *port, struct file * file, un ...@@ -642,11 +532,7 @@ static int belkin_sa_ioctl (struct usb_serial_port *port, struct file * file, un
static int __init belkin_sa_init (void) static int __init belkin_sa_init (void)
{ {
usb_serial_register (&belkin_dockstation_device); usb_serial_register (&belkin_device);
usb_serial_register (&belkin_sa_device);
usb_serial_register (&belkin_old_device);
usb_serial_register (&peracom_device);
usb_serial_register (&gocom232_device);
info(DRIVER_DESC " " DRIVER_VERSION); info(DRIVER_DESC " " DRIVER_VERSION);
return 0; return 0;
} }
...@@ -654,11 +540,7 @@ static int __init belkin_sa_init (void) ...@@ -654,11 +540,7 @@ static int __init belkin_sa_init (void)
static void __exit belkin_sa_exit (void) static void __exit belkin_sa_exit (void)
{ {
usb_serial_deregister (&belkin_dockstation_device); usb_serial_deregister (&belkin_device);
usb_serial_deregister (&belkin_sa_device);
usb_serial_deregister (&belkin_old_device);
usb_serial_deregister (&peracom_device);
usb_serial_deregister (&gocom232_device);
} }
......
...@@ -79,9 +79,6 @@ MODULE_DEVICE_TABLE (usb, id_table); ...@@ -79,9 +79,6 @@ MODULE_DEVICE_TABLE (usb, id_table);
static struct usb_serial_device_type cyberjack_device = { static struct usb_serial_device_type cyberjack_device = {
name: "Reiner SCT Cyberjack USB card reader", name: "Reiner SCT Cyberjack USB card reader",
id_table: id_table, id_table: id_table,
needs_interrupt_in: MUST_HAVE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 1, num_interrupt_in: 1,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
......
...@@ -500,9 +500,6 @@ MODULE_DEVICE_TABLE (usb, id_table_combined); ...@@ -500,9 +500,6 @@ MODULE_DEVICE_TABLE (usb, id_table_combined);
static struct usb_serial_device_type digi_acceleport_2_device = { static struct usb_serial_device_type digi_acceleport_2_device = {
name: "Digi USB", name: "Digi USB",
id_table: id_table_2, id_table: id_table_2,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 0, num_interrupt_in: 0,
num_bulk_in: 4, num_bulk_in: 4,
num_bulk_out: 4, num_bulk_out: 4,
...@@ -526,9 +523,6 @@ static struct usb_serial_device_type digi_acceleport_2_device = { ...@@ -526,9 +523,6 @@ static struct usb_serial_device_type digi_acceleport_2_device = {
static struct usb_serial_device_type digi_acceleport_4_device = { static struct usb_serial_device_type digi_acceleport_4_device = {
name: "Digi USB", name: "Digi USB",
id_table: id_table_4, id_table: id_table_4,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 0, num_interrupt_in: 0,
num_bulk_in: 5, num_bulk_in: 5,
num_bulk_out: 5, num_bulk_out: 5,
......
...@@ -116,9 +116,6 @@ MODULE_DEVICE_TABLE (usb, id_table); ...@@ -116,9 +116,6 @@ MODULE_DEVICE_TABLE (usb, id_table);
static struct usb_serial_device_type empeg_device = { static struct usb_serial_device_type empeg_device = {
name: "Empeg", name: "Empeg",
id_table: id_table, id_table: id_table,
needs_interrupt_in: MUST_HAVE_NOT, /* must not have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* must have a bulk out endpoint */
num_interrupt_in: 0, num_interrupt_in: 0,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
......
...@@ -176,9 +176,6 @@ static void ftdi_sio_break_ctl (struct usb_serial_port *port, int break_state ) ...@@ -176,9 +176,6 @@ static void ftdi_sio_break_ctl (struct usb_serial_port *port, int break_state )
static struct usb_serial_device_type ftdi_sio_device = { static struct usb_serial_device_type ftdi_sio_device = {
name: "FTDI SIO", name: "FTDI SIO",
id_table: id_table_sio, id_table: id_table_sio,
needs_interrupt_in: MUST_HAVE_NOT,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 0, num_interrupt_in: 0,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
...@@ -199,9 +196,6 @@ static struct usb_serial_device_type ftdi_sio_device = { ...@@ -199,9 +196,6 @@ static struct usb_serial_device_type ftdi_sio_device = {
static struct usb_serial_device_type ftdi_8U232AM_device = { static struct usb_serial_device_type ftdi_8U232AM_device = {
name: "FTDI 8U232AM", name: "FTDI 8U232AM",
id_table: id_table_8U232AM, id_table: id_table_8U232AM,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 0, num_interrupt_in: 0,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
......
...@@ -74,9 +74,6 @@ MODULE_DEVICE_TABLE (usb, id_table_combined); ...@@ -74,9 +74,6 @@ MODULE_DEVICE_TABLE (usb, id_table_combined);
static struct usb_serial_device_type edgeport_1port_device = { static struct usb_serial_device_type edgeport_1port_device = {
name: "Edgeport 1 port adapter", name: "Edgeport 1 port adapter",
id_table: edgeport_1port_id_table, id_table: edgeport_1port_id_table,
needs_interrupt_in: MUST_HAVE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 1, num_interrupt_in: 1,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
...@@ -98,9 +95,6 @@ static struct usb_serial_device_type edgeport_1port_device = { ...@@ -98,9 +95,6 @@ static struct usb_serial_device_type edgeport_1port_device = {
static struct usb_serial_device_type edgeport_2port_device = { static struct usb_serial_device_type edgeport_2port_device = {
name: "Edgeport 2 port adapter", name: "Edgeport 2 port adapter",
id_table: edgeport_2port_id_table, id_table: edgeport_2port_id_table,
needs_interrupt_in: MUST_HAVE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 1, num_interrupt_in: 1,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
...@@ -122,9 +116,6 @@ static struct usb_serial_device_type edgeport_2port_device = { ...@@ -122,9 +116,6 @@ static struct usb_serial_device_type edgeport_2port_device = {
static struct usb_serial_device_type edgeport_4port_device = { static struct usb_serial_device_type edgeport_4port_device = {
name: "Edgeport 4 port adapter", name: "Edgeport 4 port adapter",
id_table: edgeport_4port_id_table, id_table: edgeport_4port_id_table,
needs_interrupt_in: MUST_HAVE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 1, num_interrupt_in: 1,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
...@@ -146,9 +137,6 @@ static struct usb_serial_device_type edgeport_4port_device = { ...@@ -146,9 +137,6 @@ static struct usb_serial_device_type edgeport_4port_device = {
static struct usb_serial_device_type edgeport_8port_device = { static struct usb_serial_device_type edgeport_8port_device = {
name: "Edgeport 8 port adapter", name: "Edgeport 8 port adapter",
id_table: edgeport_8port_id_table, id_table: edgeport_8port_id_table,
needs_interrupt_in: MUST_HAVE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 1, num_interrupt_in: 1,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
......
...@@ -93,9 +93,6 @@ MODULE_DEVICE_TABLE (usb, id_table); ...@@ -93,9 +93,6 @@ MODULE_DEVICE_TABLE (usb, id_table);
struct usb_serial_device_type ir_device = { struct usb_serial_device_type ir_device = {
name: "IR Dongle", name: "IR Dongle",
id_table: id_table, id_table: id_table,
needs_interrupt_in: MUST_HAVE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 1, num_interrupt_in: 1,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
......
...@@ -451,9 +451,6 @@ static __devinitdata struct usb_device_id keyspan_usa49w_ids[] = { ...@@ -451,9 +451,6 @@ static __devinitdata struct usb_device_id keyspan_usa49w_ids[] = {
static struct usb_serial_device_type keyspan_usa18x_pre_device = { static struct usb_serial_device_type keyspan_usa18x_pre_device = {
name: "Keyspan USA18X - (without firmware)", name: "Keyspan USA18X - (without firmware)",
id_table: keyspan_usa18x_pre_ids, id_table: keyspan_usa18x_pre_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -464,9 +461,6 @@ static struct usb_serial_device_type keyspan_usa18x_pre_device = { ...@@ -464,9 +461,6 @@ static struct usb_serial_device_type keyspan_usa18x_pre_device = {
static struct usb_serial_device_type keyspan_usa19_pre_device = { static struct usb_serial_device_type keyspan_usa19_pre_device = {
name: "Keyspan USA19 - (without firmware)", name: "Keyspan USA19 - (without firmware)",
id_table: keyspan_usa19_pre_ids, id_table: keyspan_usa19_pre_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -478,9 +472,6 @@ static struct usb_serial_device_type keyspan_usa19_pre_device = { ...@@ -478,9 +472,6 @@ static struct usb_serial_device_type keyspan_usa19_pre_device = {
static struct usb_serial_device_type keyspan_usa19w_pre_device = { static struct usb_serial_device_type keyspan_usa19w_pre_device = {
name: "Keyspan USA19W - (without firmware)", name: "Keyspan USA19W - (without firmware)",
id_table: keyspan_usa19w_pre_ids, id_table: keyspan_usa19w_pre_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -492,9 +483,6 @@ static struct usb_serial_device_type keyspan_usa19w_pre_device = { ...@@ -492,9 +483,6 @@ static struct usb_serial_device_type keyspan_usa19w_pre_device = {
static struct usb_serial_device_type keyspan_usa28_pre_device = { static struct usb_serial_device_type keyspan_usa28_pre_device = {
name: "Keyspan USA28 - (without firmware)", name: "Keyspan USA28 - (without firmware)",
id_table: keyspan_usa28_pre_ids, id_table: keyspan_usa28_pre_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -505,9 +493,6 @@ static struct usb_serial_device_type keyspan_usa28_pre_device = { ...@@ -505,9 +493,6 @@ static struct usb_serial_device_type keyspan_usa28_pre_device = {
static struct usb_serial_device_type keyspan_usa28x_pre_device = { static struct usb_serial_device_type keyspan_usa28x_pre_device = {
name: "Keyspan USA28X - (without firmware)", name: "Keyspan USA28X - (without firmware)",
id_table: keyspan_usa28x_pre_ids, id_table: keyspan_usa28x_pre_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -518,9 +503,6 @@ static struct usb_serial_device_type keyspan_usa28x_pre_device = { ...@@ -518,9 +503,6 @@ static struct usb_serial_device_type keyspan_usa28x_pre_device = {
static struct usb_serial_device_type keyspan_usa28xa_pre_device = { static struct usb_serial_device_type keyspan_usa28xa_pre_device = {
name: "Keyspan USA28XA - (without firmware)", name: "Keyspan USA28XA - (without firmware)",
id_table: keyspan_usa28xa_pre_ids, id_table: keyspan_usa28xa_pre_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -531,9 +513,6 @@ static struct usb_serial_device_type keyspan_usa28xa_pre_device = { ...@@ -531,9 +513,6 @@ static struct usb_serial_device_type keyspan_usa28xa_pre_device = {
static struct usb_serial_device_type keyspan_usa28xb_pre_device = { static struct usb_serial_device_type keyspan_usa28xb_pre_device = {
name: "Keyspan USA28XB - (without firmware)", name: "Keyspan USA28XB - (without firmware)",
id_table: keyspan_usa28xb_pre_ids, id_table: keyspan_usa28xb_pre_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -544,9 +523,6 @@ static struct usb_serial_device_type keyspan_usa28xb_pre_device = { ...@@ -544,9 +523,6 @@ static struct usb_serial_device_type keyspan_usa28xb_pre_device = {
static struct usb_serial_device_type keyspan_usa49w_pre_device = { static struct usb_serial_device_type keyspan_usa49w_pre_device = {
name: "Keyspan USA49W - (without firmware)", name: "Keyspan USA49W - (without firmware)",
id_table: keyspan_usa49w_pre_ids, id_table: keyspan_usa49w_pre_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -557,9 +533,6 @@ static struct usb_serial_device_type keyspan_usa49w_pre_device = { ...@@ -557,9 +533,6 @@ static struct usb_serial_device_type keyspan_usa49w_pre_device = {
static struct usb_serial_device_type keyspan_usa18x_device = { static struct usb_serial_device_type keyspan_usa18x_device = {
name: "Keyspan USA18X", name: "Keyspan USA18X",
id_table: keyspan_usa18x_ids, id_table: keyspan_usa18x_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: 3, num_bulk_in: 3,
num_bulk_out: 4, num_bulk_out: 4,
...@@ -583,9 +556,6 @@ static struct usb_serial_device_type keyspan_usa18x_device = { ...@@ -583,9 +556,6 @@ static struct usb_serial_device_type keyspan_usa18x_device = {
static struct usb_serial_device_type keyspan_usa19_device = { static struct usb_serial_device_type keyspan_usa19_device = {
name: "Keyspan USA19", name: "Keyspan USA19",
id_table: keyspan_usa19_ids, id_table: keyspan_usa19_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: 3, num_bulk_in: 3,
num_bulk_out: 4, num_bulk_out: 4,
...@@ -610,9 +580,6 @@ static struct usb_serial_device_type keyspan_usa19_device = { ...@@ -610,9 +580,6 @@ static struct usb_serial_device_type keyspan_usa19_device = {
static struct usb_serial_device_type keyspan_usa19w_device = { static struct usb_serial_device_type keyspan_usa19w_device = {
name: "Keyspan USA19W", name: "Keyspan USA19W",
id_table: keyspan_usa19w_ids, id_table: keyspan_usa19w_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: 3, num_bulk_in: 3,
num_bulk_out: 4, num_bulk_out: 4,
...@@ -637,9 +604,6 @@ static struct usb_serial_device_type keyspan_usa19w_device = { ...@@ -637,9 +604,6 @@ static struct usb_serial_device_type keyspan_usa19w_device = {
static struct usb_serial_device_type keyspan_usa28_device = { static struct usb_serial_device_type keyspan_usa28_device = {
name: "Keyspan USA28", name: "Keyspan USA28",
id_table: keyspan_usa28_ids, id_table: keyspan_usa28_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -655,9 +619,6 @@ static struct usb_serial_device_type keyspan_usa28_device = { ...@@ -655,9 +619,6 @@ static struct usb_serial_device_type keyspan_usa28_device = {
static struct usb_serial_device_type keyspan_usa28x_device = { static struct usb_serial_device_type keyspan_usa28x_device = {
name: "Keyspan USA28X/XB", name: "Keyspan USA28X/XB",
id_table: keyspan_usa28x_ids, id_table: keyspan_usa28x_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -682,9 +643,6 @@ static struct usb_serial_device_type keyspan_usa28x_device = { ...@@ -682,9 +643,6 @@ static struct usb_serial_device_type keyspan_usa28x_device = {
static struct usb_serial_device_type keyspan_usa28xa_device = { static struct usb_serial_device_type keyspan_usa28xa_device = {
name: "Keyspan USA28XA", name: "Keyspan USA28XA",
id_table: keyspan_usa28xa_ids, id_table: keyspan_usa28xa_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -709,9 +667,6 @@ static struct usb_serial_device_type keyspan_usa28xa_device = { ...@@ -709,9 +667,6 @@ static struct usb_serial_device_type keyspan_usa28xa_device = {
static struct usb_serial_device_type keyspan_usa49w_device = { static struct usb_serial_device_type keyspan_usa49w_device = {
name: "Keyspan USA49W", name: "Keyspan USA49W",
id_table: keyspan_usa49w_ids, id_table: keyspan_usa49w_ids,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: 5, num_bulk_in: 5,
num_bulk_out: 5, num_bulk_out: 5,
......
...@@ -172,10 +172,6 @@ static __devinitdata struct usb_device_id id_table_fake [] = { ...@@ -172,10 +172,6 @@ static __devinitdata struct usb_device_id id_table_fake [] = {
#ifdef XIRCOM #ifdef XIRCOM
static __devinitdata struct usb_device_id id_table_fake_xircom [] = { static __devinitdata struct usb_device_id id_table_fake_xircom [] = {
{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) }, { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
{ }
};
static __devinitdata struct usb_device_id id_table_fake_entregra [] = {
{ USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) }, { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
{ } { }
}; };
...@@ -843,9 +839,6 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) ...@@ -843,9 +839,6 @@ static void keyspan_pda_shutdown (struct usb_serial *serial)
static struct usb_serial_device_type keyspan_pda_fake_device = { static struct usb_serial_device_type keyspan_pda_fake_device = {
name: "Keyspan PDA - (prerenumeration)", name: "Keyspan PDA - (prerenumeration)",
id_table: id_table_fake, id_table: id_table_fake,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -856,24 +849,8 @@ static struct usb_serial_device_type keyspan_pda_fake_device = { ...@@ -856,24 +849,8 @@ static struct usb_serial_device_type keyspan_pda_fake_device = {
#ifdef XIRCOM #ifdef XIRCOM
static struct usb_serial_device_type xircom_pgs_fake_device = { static struct usb_serial_device_type xircom_pgs_fake_device = {
name: "Xircom PGS - (prerenumeration)", name: "Xircom / Entregra PGS - (prerenumeration)",
id_table: id_table_fake_xircom, id_table: id_table_fake_xircom,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE,
num_ports: 1,
startup: keyspan_pda_fake_startup,
};
static struct usb_serial_device_type entregra_pgs_fake_device = {
name: "Entregra PGS - (prerenumeration)",
id_table: id_table_fake_entregra,
needs_interrupt_in: DONT_CARE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: DONT_CARE,
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -885,9 +862,6 @@ static struct usb_serial_device_type entregra_pgs_fake_device = { ...@@ -885,9 +862,6 @@ static struct usb_serial_device_type entregra_pgs_fake_device = {
static struct usb_serial_device_type keyspan_pda_device = { static struct usb_serial_device_type keyspan_pda_device = {
name: "Keyspan PDA", name: "Keyspan PDA",
id_table: id_table_std, id_table: id_table_std,
needs_interrupt_in: MUST_HAVE,
needs_bulk_in: DONT_CARE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 1, num_interrupt_in: 1,
num_bulk_in: 0, num_bulk_in: 0,
num_bulk_out: 1, num_bulk_out: 1,
...@@ -917,7 +891,6 @@ static int __init keyspan_pda_init (void) ...@@ -917,7 +891,6 @@ static int __init keyspan_pda_init (void)
#endif #endif
#ifdef XIRCOM #ifdef XIRCOM
usb_serial_register (&xircom_pgs_fake_device); usb_serial_register (&xircom_pgs_fake_device);
usb_serial_register (&entregra_pgs_fake_device);
#endif #endif
info(DRIVER_DESC " " DRIVER_VERSION); info(DRIVER_DESC " " DRIVER_VERSION);
return 0; return 0;
...@@ -931,7 +904,6 @@ static void __exit keyspan_pda_exit (void) ...@@ -931,7 +904,6 @@ static void __exit keyspan_pda_exit (void)
usb_serial_deregister (&keyspan_pda_fake_device); usb_serial_deregister (&keyspan_pda_fake_device);
#endif #endif
#ifdef XIRCOM #ifdef XIRCOM
usb_serial_deregister (&entregra_pgs_fake_device);
usb_serial_deregister (&xircom_pgs_fake_device); usb_serial_deregister (&xircom_pgs_fake_device);
#endif #endif
} }
......
...@@ -136,54 +136,12 @@ static __devinitdata struct usb_device_id id_table_combined [] = { ...@@ -136,54 +136,12 @@ static __devinitdata struct usb_device_id id_table_combined [] = {
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
static __devinitdata struct usb_device_id mct_u232_table [] = {
{ USB_DEVICE(MCT_U232_VID, MCT_U232_PID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id mct_u232_sitecom_table [] = {
{ USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id mct_u232_du_h3sp_table [] = {
{ USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table_combined); MODULE_DEVICE_TABLE (usb, id_table_combined);
static struct usb_serial_device_type mct_u232_device = { static struct usb_serial_device_type mct_u232_device = {
name: "Magic Control Technology USB-RS232", name: "Magic Control Technology USB-RS232",
id_table: mct_u232_table, id_table: id_table_combined,
needs_interrupt_in: MUST_HAVE, /* 2 interrupt-in endpoints */
needs_bulk_in: MUST_HAVE_NOT, /* no bulk-in endpoint */
needs_bulk_out: MUST_HAVE, /* 1 bulk-out endpoint */
num_interrupt_in: 2,
num_bulk_in: 0,
num_bulk_out: 1,
num_ports: 1,
open: mct_u232_open,
close: mct_u232_close,
#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
write: mct_u232_write,
write_bulk_callback: mct_u232_write_bulk_callback,
#endif
read_int_callback: mct_u232_read_int_callback,
ioctl: mct_u232_ioctl,
set_termios: mct_u232_set_termios,
break_ctl: mct_u232_break_ctl,
startup: mct_u232_startup,
shutdown: mct_u232_shutdown,
};
static struct usb_serial_device_type mct_u232_sitecom_device = {
name: "MCT/Sitecom USB-RS232",
id_table: mct_u232_sitecom_table,
needs_interrupt_in: MUST_HAVE, /* 2 interrupt-in endpoints */
needs_bulk_in: MUST_HAVE_NOT, /* no bulk-in endpoint */
needs_bulk_out: MUST_HAVE, /* 1 bulk-out endpoint */
num_interrupt_in: 2, num_interrupt_in: 2,
num_bulk_in: 0, num_bulk_in: 0,
num_bulk_out: 1, num_bulk_out: 1,
...@@ -202,32 +160,6 @@ static struct usb_serial_device_type mct_u232_sitecom_device = { ...@@ -202,32 +160,6 @@ static struct usb_serial_device_type mct_u232_sitecom_device = {
shutdown: mct_u232_shutdown, shutdown: mct_u232_shutdown,
}; };
static struct usb_serial_device_type mct_u232_du_h3sp_device = {
name: "MCT/D-Link DU-H3SP USB BAY",
id_table: mct_u232_du_h3sp_table,
needs_interrupt_in: MUST_HAVE, /* 2 interrupt-in endpoints */
needs_bulk_in: MUST_HAVE_NOT, /* no bulk-in endpoint */
needs_bulk_out: MUST_HAVE, /* 1 bulk-out endpoint */
num_interrupt_in: 2,
num_bulk_in: 0,
num_bulk_out: 1,
num_ports: 1,
open: mct_u232_open,
close: mct_u232_close,
#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
write: mct_u232_write,
write_bulk_callback: mct_u232_write_bulk_callback,
#endif
read_int_callback: mct_u232_read_int_callback,
ioctl: mct_u232_ioctl,
set_termios: mct_u232_set_termios,
break_ctl: mct_u232_break_ctl,
startup: mct_u232_startup,
shutdown: mct_u232_shutdown,
};
struct mct_u232_private { struct mct_u232_private {
unsigned long control_state; /* Modem Line Setting (TIOCM) */ unsigned long control_state; /* Modem Line Setting (TIOCM) */
...@@ -880,9 +812,7 @@ static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file, ...@@ -880,9 +812,7 @@ static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file,
static int __init mct_u232_init (void) static int __init mct_u232_init (void)
{ {
usb_serial_register (&mct_u232_device); usb_serial_register (&mct_u232_device);
usb_serial_register (&mct_u232_sitecom_device); info(DRIVER_DESC " " DRIVER_VERSION);
usb_serial_register (&mct_u232_du_h3sp_device);
info(DRIVER_VERSION ":" DRIVER_DESC);
return 0; return 0;
} }
...@@ -890,8 +820,6 @@ static int __init mct_u232_init (void) ...@@ -890,8 +820,6 @@ static int __init mct_u232_init (void)
static void __exit mct_u232_exit (void) static void __exit mct_u232_exit (void)
{ {
usb_serial_deregister (&mct_u232_device); usb_serial_deregister (&mct_u232_device);
usb_serial_deregister (&mct_u232_sitecom_device);
usb_serial_deregister (&mct_u232_du_h3sp_device);
} }
......
...@@ -90,9 +90,6 @@ MODULE_DEVICE_TABLE (usb, id_table); ...@@ -90,9 +90,6 @@ MODULE_DEVICE_TABLE (usb, id_table);
static struct usb_serial_device_type zyxel_omninet_device = { static struct usb_serial_device_type zyxel_omninet_device = {
name: "ZyXEL - omni.net lcd plus usb", name: "ZyXEL - omni.net lcd plus usb",
id_table: id_table, id_table: id_table,
needs_interrupt_in: MUST_HAVE,
needs_bulk_in: MUST_HAVE,
needs_bulk_out: MUST_HAVE,
num_interrupt_in: 1, num_interrupt_in: 1,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 2, num_bulk_out: 2,
......
...@@ -118,9 +118,6 @@ static void pl2303_shutdown (struct usb_serial *serial); ...@@ -118,9 +118,6 @@ static void pl2303_shutdown (struct usb_serial *serial);
static struct usb_serial_device_type pl2303_device = { static struct usb_serial_device_type pl2303_device = {
name: "PL-2303", name: "PL-2303",
id_table: id_table, id_table: id_table,
needs_interrupt_in: DONT_CARE, /* this device must have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
......
...@@ -108,13 +108,6 @@ struct usb_serial { ...@@ -108,13 +108,6 @@ struct usb_serial {
}; };
#define MUST_HAVE_NOT 0x01
#define MUST_HAVE 0x02
#define DONT_CARE 0x03
#define HAS 0x02
#define HAS_NOT 0x01
#define NUM_DONT_CARE (-1) #define NUM_DONT_CARE (-1)
...@@ -122,9 +115,6 @@ struct usb_serial { ...@@ -122,9 +115,6 @@ struct usb_serial {
struct usb_serial_device_type { struct usb_serial_device_type {
char *name; char *name;
const struct usb_device_id *id_table; const struct usb_device_id *id_table;
char needs_interrupt_in;
char needs_bulk_in;
char needs_bulk_out;
char num_interrupt_in; char num_interrupt_in;
char num_bulk_in; char num_bulk_in;
char num_bulk_out; char num_bulk_out;
......
...@@ -339,9 +339,6 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ ...@@ -339,9 +339,6 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
static struct usb_serial_device_type generic_device = { static struct usb_serial_device_type generic_device = {
name: "Generic", name: "Generic",
id_table: generic_device_ids, id_table: generic_device_ids,
needs_interrupt_in: DONT_CARE, /* don't have to have an interrupt in endpoint */
needs_bulk_in: DONT_CARE, /* don't have to have a bulk in endpoint */
needs_bulk_out: DONT_CARE, /* don't have to have a bulk out endpoint */
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -1068,9 +1065,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -1068,9 +1065,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
int minor; int minor;
int buffer_size; int buffer_size;
int i; int i;
char interrupt_pipe;
char bulk_in_pipe;
char bulk_out_pipe;
int num_interrupt_in = 0; int num_interrupt_in = 0;
int num_bulk_in = 0; int num_bulk_in = 0;
int num_bulk_out = 0; int num_bulk_out = 0;
...@@ -1097,10 +1091,8 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -1097,10 +1091,8 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
dbg("none matched"); dbg("none matched");
return(NULL); return(NULL);
} }
/* descriptor matches, let's find the endpoints needed */ /* descriptor matches, let's find the endpoints needed */
interrupt_pipe = bulk_in_pipe = bulk_out_pipe = HAS_NOT;
/* check out the endpoints */ /* check out the endpoints */
iface_desc = &interface->altsetting[0]; iface_desc = &interface->altsetting[0];
for (i = 0; i < iface_desc->bNumEndpoints; ++i) { for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
...@@ -1110,7 +1102,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -1110,7 +1102,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
((endpoint->bmAttributes & 3) == 0x02)) { ((endpoint->bmAttributes & 3) == 0x02)) {
/* we found a bulk in endpoint */ /* we found a bulk in endpoint */
dbg("found bulk in"); dbg("found bulk in");
bulk_in_pipe = HAS;
bulk_in_endpoint[num_bulk_in] = endpoint; bulk_in_endpoint[num_bulk_in] = endpoint;
++num_bulk_in; ++num_bulk_in;
} }
...@@ -1119,7 +1110,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -1119,7 +1110,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
((endpoint->bmAttributes & 3) == 0x02)) { ((endpoint->bmAttributes & 3) == 0x02)) {
/* we found a bulk out endpoint */ /* we found a bulk out endpoint */
dbg("found bulk out"); dbg("found bulk out");
bulk_out_pipe = HAS;
bulk_out_endpoint[num_bulk_out] = endpoint; bulk_out_endpoint[num_bulk_out] = endpoint;
++num_bulk_out; ++num_bulk_out;
} }
...@@ -1128,7 +1118,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -1128,7 +1118,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
((endpoint->bmAttributes & 3) == 0x03)) { ((endpoint->bmAttributes & 3) == 0x03)) {
/* we found a interrupt in endpoint */ /* we found a interrupt in endpoint */
dbg("found interrupt in"); dbg("found interrupt in");
interrupt_pipe = HAS;
interrupt_in_endpoint[num_interrupt_in] = endpoint; interrupt_in_endpoint[num_interrupt_in] = endpoint;
++num_interrupt_in; ++num_interrupt_in;
} }
...@@ -1151,7 +1140,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -1151,7 +1140,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
((endpoint->bmAttributes & 3) == 0x03)) { ((endpoint->bmAttributes & 3) == 0x03)) {
/* we found a interrupt in endpoint */ /* we found a interrupt in endpoint */
dbg("found interrupt in for Prolific device on separate interface"); dbg("found interrupt in for Prolific device on separate interface");
interrupt_pipe = HAS;
interrupt_in_endpoint[num_interrupt_in] = endpoint; interrupt_in_endpoint[num_interrupt_in] = endpoint;
++num_interrupt_in; ++num_interrupt_in;
} }
...@@ -1161,15 +1149,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -1161,15 +1149,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
/* END HORRIBLE HACK FOR PL2303 */ /* END HORRIBLE HACK FOR PL2303 */
#endif #endif
/* verify that we found all of the endpoints that we need */
if (!((interrupt_pipe & type->needs_interrupt_in) &&
(bulk_in_pipe & type->needs_bulk_in) &&
(bulk_out_pipe & type->needs_bulk_out))) {
/* nope, they don't match what we expected */
info("descriptors matched, but endpoints did not");
return NULL;
}
/* found all that we need */ /* found all that we need */
info("%s converter detected", type->name); info("%s converter detected", type->name);
......
...@@ -127,7 +127,7 @@ ...@@ -127,7 +127,7 @@
/* /*
* Version Information * Version Information
*/ */
#define DRIVER_VERSION "v1.5" #define DRIVER_VERSION "v1.6"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
#define DRIVER_DESC "USB HandSpring Visor, Palm m50x, Sony Cli driver" #define DRIVER_DESC "USB HandSpring Visor, Palm m50x, Sony Cli driver"
...@@ -147,15 +147,12 @@ static void visor_write_bulk_callback (struct urb *urb); ...@@ -147,15 +147,12 @@ static void visor_write_bulk_callback (struct urb *urb);
static void visor_read_bulk_callback (struct urb *urb); static void visor_read_bulk_callback (struct urb *urb);
static __devinitdata struct usb_device_id visor_id_table [] = { static __devinitdata struct usb_device_id combined_id_table [] = {
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id palm_4_0_id_table [] = {
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
...@@ -164,11 +161,6 @@ static __devinitdata struct usb_device_id clie_id_3_5_table [] = { ...@@ -164,11 +161,6 @@ static __devinitdata struct usb_device_id clie_id_3_5_table [] = {
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
static __devinitdata struct usb_device_id clie_id_4_0_table [] = {
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
{ } /* Terminating entry */
};
static __devinitdata struct usb_device_id id_table [] = { static __devinitdata struct usb_device_id id_table [] = {
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) }, { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
...@@ -183,39 +175,10 @@ MODULE_DEVICE_TABLE (usb, id_table); ...@@ -183,39 +175,10 @@ MODULE_DEVICE_TABLE (usb, id_table);
/* All of the device info needed for the Handspring Visor */ /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */
static struct usb_serial_device_type handspring_device = { static struct usb_serial_device_type handspring_device = {
name: "Handspring Visor", name: "Handspring Visor / Palm 4.0 / Cli 4.0",
id_table: visor_id_table, id_table: combined_id_table,
needs_interrupt_in: MUST_HAVE_NOT, /* this device must not have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 0,
num_bulk_in: 2,
num_bulk_out: 2,
num_ports: 2,
open: visor_open,
close: visor_close,
throttle: visor_throttle,
unthrottle: visor_unthrottle,
startup: visor_startup,
shutdown: visor_shutdown,
ioctl: visor_ioctl,
set_termios: visor_set_termios,
write: visor_write,
write_room: visor_write_room,
chars_in_buffer: visor_chars_in_buffer,
write_bulk_callback: visor_write_bulk_callback,
read_bulk_callback: visor_read_bulk_callback,
};
/* device info for the Palm 4.0 devices */
static struct usb_serial_device_type palm_4_0_device = {
name: "Palm 4.0",
id_table: palm_4_0_id_table,
needs_interrupt_in: MUST_HAVE_NOT, /* this device must not have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 0, num_interrupt_in: 0,
num_bulk_in: 2, num_bulk_in: 2,
num_bulk_out: 2, num_bulk_out: 2,
...@@ -235,14 +198,10 @@ static struct usb_serial_device_type palm_4_0_device = { ...@@ -235,14 +198,10 @@ static struct usb_serial_device_type palm_4_0_device = {
read_bulk_callback: visor_read_bulk_callback, read_bulk_callback: visor_read_bulk_callback,
}; };
/* device info for the Sony Clie OS version 3.5 */ /* device info for the Sony Clie OS version 3.5 */
static struct usb_serial_device_type clie_3_5_device = { static struct usb_serial_device_type clie_3_5_device = {
name: "Sony Cli 3.5", name: "Sony Cli 3.5",
id_table: clie_id_3_5_table, id_table: clie_id_3_5_table,
needs_interrupt_in: MUST_HAVE_NOT, /* this device must not have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 0, num_interrupt_in: 0,
num_bulk_in: 1, num_bulk_in: 1,
num_bulk_out: 1, num_bulk_out: 1,
...@@ -260,31 +219,6 @@ static struct usb_serial_device_type clie_3_5_device = { ...@@ -260,31 +219,6 @@ static struct usb_serial_device_type clie_3_5_device = {
read_bulk_callback: visor_read_bulk_callback, read_bulk_callback: visor_read_bulk_callback,
}; };
/* device info for the Sony Clie OS version 4.0 */
static struct usb_serial_device_type clie_4_0_device = {
name: "Sony Clié 4.0",
id_table: clie_id_4_0_table,
needs_interrupt_in: MUST_HAVE_NOT, /* this device must not have an interrupt in endpoint */
needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */
needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */
num_interrupt_in: 0,
num_bulk_in: 2,
num_bulk_out: 2,
num_ports: 2,
open: visor_open,
close: visor_close,
throttle: visor_throttle,
unthrottle: visor_unthrottle,
startup: visor_startup,
shutdown: visor_shutdown,
ioctl: visor_ioctl,
set_termios: visor_set_termios,
write: visor_write,
write_room: visor_write_room,
chars_in_buffer: visor_chars_in_buffer,
write_bulk_callback: visor_write_bulk_callback,
read_bulk_callback: visor_read_bulk_callback,
};
#define NUM_URBS 24 #define NUM_URBS 24
#define URB_TRANSFER_BUFFER_SIZE 768 #define URB_TRANSFER_BUFFER_SIZE 768
...@@ -801,9 +735,7 @@ static int __init visor_init (void) ...@@ -801,9 +735,7 @@ static int __init visor_init (void)
int i; int i;
usb_serial_register (&handspring_device); usb_serial_register (&handspring_device);
usb_serial_register (&palm_4_0_device);
usb_serial_register (&clie_3_5_device); usb_serial_register (&clie_3_5_device);
usb_serial_register (&clie_4_0_device);
/* create our write urb pool and transfer buffers */ /* create our write urb pool and transfer buffers */
spin_lock_init (&write_urb_pool_lock); spin_lock_init (&write_urb_pool_lock);
...@@ -835,9 +767,7 @@ static void __exit visor_exit (void) ...@@ -835,9 +767,7 @@ static void __exit visor_exit (void)
unsigned long flags; unsigned long flags;
usb_serial_deregister (&handspring_device); usb_serial_deregister (&handspring_device);
usb_serial_deregister (&palm_4_0_device);
usb_serial_deregister (&clie_3_5_device); usb_serial_deregister (&clie_3_5_device);
usb_serial_deregister (&clie_4_0_device);
spin_lock_irqsave (&write_urb_pool_lock, flags); spin_lock_irqsave (&write_urb_pool_lock, flags);
......
...@@ -88,7 +88,7 @@ ...@@ -88,7 +88,7 @@
/* /*
* Version Information * Version Information
*/ */
#define DRIVER_VERSION "v1.1" #define DRIVER_VERSION "v1.2"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
#define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
...@@ -128,28 +128,23 @@ static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, ...@@ -128,28 +128,23 @@ static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file,
static void whiteheat_set_termios (struct usb_serial_port *port, struct termios * old); static void whiteheat_set_termios (struct usb_serial_port *port, struct termios * old);
static void whiteheat_throttle (struct usb_serial_port *port); static void whiteheat_throttle (struct usb_serial_port *port);
static void whiteheat_unthrottle (struct usb_serial_port *port); static void whiteheat_unthrottle (struct usb_serial_port *port);
static int whiteheat_startup (struct usb_serial *serial); static int whiteheat_fake_startup (struct usb_serial *serial);
static void whiteheat_shutdown (struct usb_serial *serial); static int whiteheat_real_startup (struct usb_serial *serial);
static void whiteheat_real_shutdown (struct usb_serial *serial);
static struct usb_serial_device_type whiteheat_fake_device = { static struct usb_serial_device_type whiteheat_fake_device = {
name: "Connect Tech - WhiteHEAT - (prerenumeration)", name: "Connect Tech - WhiteHEAT - (prerenumeration)",
id_table: id_table_prerenumeration, id_table: id_table_prerenumeration,
needs_interrupt_in: DONT_CARE, /* don't have to have an interrupt in endpoint */
needs_bulk_in: DONT_CARE, /* don't have to have a bulk in endpoint */
needs_bulk_out: DONT_CARE, /* don't have to have a bulk out endpoint */
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
num_ports: 1, num_ports: 1,
startup: whiteheat_startup startup: whiteheat_fake_startup,
}; };
static struct usb_serial_device_type whiteheat_device = { static struct usb_serial_device_type whiteheat_device = {
name: "Connect Tech - WhiteHEAT", name: "Connect Tech - WhiteHEAT",
id_table: id_table_std, id_table: id_table_std,
needs_interrupt_in: DONT_CARE, /* don't have to have an interrupt in endpoint */
needs_bulk_in: DONT_CARE, /* don't have to have a bulk in endpoint */
needs_bulk_out: DONT_CARE, /* don't have to have a bulk out endpoint */
num_interrupt_in: NUM_DONT_CARE, num_interrupt_in: NUM_DONT_CARE,
num_bulk_in: NUM_DONT_CARE, num_bulk_in: NUM_DONT_CARE,
num_bulk_out: NUM_DONT_CARE, num_bulk_out: NUM_DONT_CARE,
...@@ -160,7 +155,8 @@ static struct usb_serial_device_type whiteheat_device = { ...@@ -160,7 +155,8 @@ static struct usb_serial_device_type whiteheat_device = {
unthrottle: whiteheat_unthrottle, unthrottle: whiteheat_unthrottle,
ioctl: whiteheat_ioctl, ioctl: whiteheat_ioctl,
set_termios: whiteheat_set_termios, set_termios: whiteheat_set_termios,
shutdown: whiteheat_shutdown, startup: whiteheat_real_startup,
shutdown: whiteheat_real_shutdown,
}; };
struct whiteheat_private { struct whiteheat_private {
...@@ -539,7 +535,7 @@ static void whiteheat_unthrottle (struct usb_serial_port *port) ...@@ -539,7 +535,7 @@ static void whiteheat_unthrottle (struct usb_serial_port *port)
- device renumerated itself and comes up as new device id with all - device renumerated itself and comes up as new device id with all
firmware download completed. firmware download completed.
*/ */
static int whiteheat_startup (struct usb_serial *serial) static int whiteheat_fake_startup (struct usb_serial *serial)
{ {
int response; int response;
const struct whiteheat_hex_record *record; const struct whiteheat_hex_record *record;
...@@ -598,7 +594,66 @@ static int whiteheat_startup (struct usb_serial *serial) ...@@ -598,7 +594,66 @@ static int whiteheat_startup (struct usb_serial *serial)
} }
static void whiteheat_shutdown (struct usb_serial *serial) static int whiteheat_real_startup (struct usb_serial *serial)
{
struct whiteheat_hw_info *hw_info;
int pipe;
int ret;
int alen;
__u8 command[2] = { WHITEHEAT_GET_HW_INFO, 0 };
__u8 result[sizeof(*hw_info) + 1];
pipe = usb_rcvbulkpipe (serial->dev, 7);
usb_bulk_msg (serial->dev, pipe, result, sizeof(result), &alen, 2 * HZ);
/*
* We ignore the return code. In the case where rmmod/insmod is
* performed with a WhiteHEAT connected, the above times out
* because the endpoint is already prepped, meaning the below succeeds
* regardless. All other cases the above succeeds.
*/
pipe = usb_sndbulkpipe (serial->dev, 7);
ret = usb_bulk_msg (serial->dev, pipe, command, sizeof(command), &alen, 2 * HZ);
if (ret) {
err("%s: Couldn't send command [%d]", serial->type->name, ret);
goto error_out;
} else if (alen != sizeof(command)) {
err("%s: Send command incomplete [%d]", serial->type->name, alen);
goto error_out;
}
pipe = usb_rcvbulkpipe (serial->dev, 7);
ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(result), &alen, 2 * HZ);
if (ret) {
err("%s: Couldn't get results [%d]", serial->type->name, ret);
goto error_out;
} else if (alen != sizeof(result)) {
err("%s: Get results incomplete [%d]", serial->type->name, alen);
goto error_out;
} else if (result[0] != command[0]) {
err("%s: Command failed [%d]", serial->type->name, result[0]);
goto error_out;
}
hw_info = (struct whiteheat_hw_info *)&result[1];
info("%s: Driver %s: Firmware v%d.%02d", serial->type->name,
DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
return 0;
error_out:
err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->name);
/*
* Return that we've claimed the interface. A failure here may be
* due to interception by the command_callback routine or other
* causes that don't mean that the firmware isn't running. This may
* change in the future. Probably should actually.
*/
return 0;
}
static void whiteheat_real_shutdown (struct usb_serial *serial)
{ {
struct usb_serial_port *command_port; struct usb_serial_port *command_port;
int i; int i;
...@@ -660,7 +715,7 @@ static int __init whiteheat_init (void) ...@@ -660,7 +715,7 @@ static int __init whiteheat_init (void)
{ {
usb_serial_register (&whiteheat_fake_device); usb_serial_register (&whiteheat_fake_device);
usb_serial_register (&whiteheat_device); usb_serial_register (&whiteheat_device);
info(DRIVER_VERSION ":" DRIVER_DESC); info(DRIVER_DESC " " DRIVER_VERSION);
return 0; return 0;
} }
......
This source diff could not be displayed because it is too large. You can view the blob instead.
...@@ -215,6 +215,9 @@ inline void bio_init(struct bio *bio) ...@@ -215,6 +215,9 @@ inline void bio_init(struct bio *bio)
atomic_set(&bio->bi_cnt, 1); atomic_set(&bio->bi_cnt, 1);
bio->bi_flags = 0; bio->bi_flags = 0;
bio->bi_rw = 0; bio->bi_rw = 0;
bio->bi_vcnt = 0;
bio->bi_idx = 0;
bio->bi_size = 0;
bio->bi_end_io = NULL; bio->bi_end_io = NULL;
} }
......
...@@ -318,7 +318,7 @@ static int partitions_read_proc(char *page, char **start, off_t off, ...@@ -318,7 +318,7 @@ static int partitions_read_proc(char *page, char **start, off_t off,
static void *single_start(struct seq_file *p, loff_t *pos) static void *single_start(struct seq_file *p, loff_t *pos)
{ {
return (void *)(*pos == 0); return NULL + (*pos == 0);
} }
static void *single_next(struct seq_file *p, void *v, loff_t *pos) static void *single_next(struct seq_file *p, void *v, loff_t *pos)
{ {
...@@ -561,9 +561,7 @@ void __init proc_misc_init(void) ...@@ -561,9 +561,7 @@ void __init proc_misc_init(void)
entry->proc_fops = &proc_kmsg_operations; entry->proc_fops = &proc_kmsg_operations;
create_seq_entry("mounts", 0, &proc_mounts_operations); create_seq_entry("mounts", 0, &proc_mounts_operations);
create_seq_entry("cpuinfo", 0, &proc_cpuinfo_operations); create_seq_entry("cpuinfo", 0, &proc_cpuinfo_operations);
#if defined(CONFIG_ARCH_S390) || defined(CONFIG_X86) || defined(CONFIG_ARCH_MIPS)
create_seq_entry("interrupts", 0, &proc_interrupts_operations); create_seq_entry("interrupts", 0, &proc_interrupts_operations);
#endif
#ifdef CONFIG_MODULES #ifdef CONFIG_MODULES
create_seq_entry("ksyms", 0, &proc_ksyms_operations); create_seq_entry("ksyms", 0, &proc_ksyms_operations);
#endif #endif
......
...@@ -64,8 +64,15 @@ do { \ ...@@ -64,8 +64,15 @@ do { \
printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \ printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
__asm__ __volatile__("call_pal %0 # bugchk" : : "i" (PAL_bugchk)); \ __asm__ __volatile__("call_pal %0 # bugchk" : : "i" (PAL_bugchk)); \
} while (0) } while (0)
#define PAGE_BUG(page) BUG() #define PAGE_BUG(page) BUG()
#define BUG_ON(condition) \
do { \
if (unlikely((long)(condition)))\
BUG(); \
} while (0)
/* Pure 2^n version of get_order */ /* Pure 2^n version of get_order */
extern __inline__ int get_order(unsigned long size) extern __inline__ int get_order(unsigned long size)
{ {
......
...@@ -93,10 +93,9 @@ struct bio { ...@@ -93,10 +93,9 @@ struct bio {
#define bio_iovec_idx(bio, idx) (&((bio)->bi_io_vec[(bio)->bi_idx])) #define bio_iovec_idx(bio, idx) (&((bio)->bi_io_vec[(bio)->bi_idx]))
#define bio_iovec(bio) bio_iovec_idx((bio), (bio)->bi_idx) #define bio_iovec(bio) bio_iovec_idx((bio), (bio)->bi_idx)
#define bio_page(bio) bio_iovec((bio))->bv_page #define bio_page(bio) bio_iovec((bio))->bv_page
#define bio_size(bio) ((bio)->bi_size)
#define __bio_offset(bio, idx) bio_iovec_idx((bio), (idx))->bv_offset #define __bio_offset(bio, idx) bio_iovec_idx((bio), (idx))->bv_offset
#define bio_offset(bio) bio_iovec((bio))->bv_offset #define bio_offset(bio) bio_iovec((bio))->bv_offset
#define bio_sectors(bio) (bio_size((bio)) >> 9) #define bio_sectors(bio) ((bio)->bi_size >> 9)
#define bio_data(bio) (page_address(bio_page((bio))) + bio_offset((bio))) #define bio_data(bio) (page_address(bio_page((bio))) + bio_offset((bio)))
#define bio_barrier(bio) ((bio)->bi_rw & (1 << BIO_BARRIER)) #define bio_barrier(bio) ((bio)->bi_rw & (1 << BIO_BARRIER))
...@@ -106,13 +105,6 @@ struct bio { ...@@ -106,13 +105,6 @@ struct bio {
#define bio_to_phys(bio) (page_to_phys(bio_page((bio))) + bio_offset((bio))) #define bio_to_phys(bio) (page_to_phys(bio_page((bio))) + bio_offset((bio)))
#define bvec_to_phys(bv) (page_to_phys((bv)->bv_page) + (bv)->bv_offset) #define bvec_to_phys(bv) (page_to_phys((bv)->bv_page) + (bv)->bv_offset)
/*
* hack to avoid doing 64-bit calculations on 32-bit archs, instead use a
* pseudo-pfn check to do segment coalescing
*/
#define bio_sec_pfn(bio) \
((((bio_page(bio) - bio_page(bio)->zone->zone_mem_map) << PAGE_SHIFT) / bio_size(bio)) + (bio_offset(bio) >> 9))
/* /*
* queues that have highmem support enabled may still need to revert to * queues that have highmem support enabled may still need to revert to
* PIO transfers occasionally and thus map high pages temporarily. For * PIO transfers occasionally and thus map high pages temporarily. For
...@@ -124,12 +116,16 @@ struct bio { ...@@ -124,12 +116,16 @@ struct bio {
#define __bio_kunmap(bio, idx) kunmap(bio_iovec_idx((bio), (idx))->bv_page) #define __bio_kunmap(bio, idx) kunmap(bio_iovec_idx((bio), (idx))->bv_page)
#define bio_kunmap(bio) __bio_kunmap((bio), (bio)->bi_idx) #define bio_kunmap(bio) __bio_kunmap((bio), (bio)->bi_idx)
/*
* merge helpers etc
*/
#define __BVEC_END(bio) bio_iovec_idx((bio), (bio)->bi_idx - 1)
#define BIO_CONTIG(bio, nxt) \ #define BIO_CONTIG(bio, nxt) \
(bio_to_phys((bio)) + bio_size((bio)) == bio_to_phys((nxt))) (bvec_to_phys(__BVEC_END((bio)) + (bio)->bi_size) ==bio_to_phys((nxt)))
#define __BIO_SEG_BOUNDARY(addr1, addr2, mask) \ #define __BIO_SEG_BOUNDARY(addr1, addr2, mask) \
(((addr1) | (mask)) == (((addr2) - 1) | (mask))) (((addr1) | (mask)) == (((addr2) - 1) | (mask)))
#define BIO_SEG_BOUNDARY(q, b1, b2) \ #define BIO_SEG_BOUNDARY(q, b1, b2) \
__BIO_SEG_BOUNDARY(bvec_to_phys(bio_iovec_idx((b1), (b1)->bi_cnt - 1)), bio_to_phys((b2)) + bio_size((b2)), (q)->seg_boundary_mask) __BIO_SEG_BOUNDARY(bvec_to_phys(__BVEC_END((b1))), bio_to_phys((b2)) + (b2)->bi_size, (q)->seg_boundary_mask)
typedef int (bio_end_io_t) (struct bio *, int); typedef int (bio_end_io_t) (struct bio *, int);
typedef void (bio_destructor_t) (struct bio *); typedef void (bio_destructor_t) (struct bio *);
......
...@@ -177,14 +177,11 @@ extern inline struct request *elv_next_request(request_queue_t *q) ...@@ -177,14 +177,11 @@ extern inline struct request *elv_next_request(request_queue_t *q)
#ifdef CONFIG_HIGHMEM #ifdef CONFIG_HIGHMEM
extern void create_bounce(struct bio **bio_orig, int gfp_mask); extern void create_bounce(unsigned long pfn, struct bio **bio_orig, int gfp_mask);
extern inline void blk_queue_bounce(request_queue_t *q, struct bio **bio) extern inline void blk_queue_bounce(request_queue_t *q, struct bio **bio)
{ {
struct page *page = bio_page(*bio); create_bounce(q->bounce_pfn, bio, q->bounce_gfp);
if ((page - page->zone->zone_mem_map) + (page->zone->zone_start_paddr >> PAGE_SHIFT) < q->bounce_pfn)
create_bounce(bio, q->bounce_gfp);
} }
#else /* CONFIG_HIGHMEM */ #else /* CONFIG_HIGHMEM */
...@@ -234,7 +231,7 @@ extern void blk_attempt_remerge(request_queue_t *, struct request *); ...@@ -234,7 +231,7 @@ extern void blk_attempt_remerge(request_queue_t *, struct request *);
extern int blk_init_queue(request_queue_t *, request_fn_proc *); extern int blk_init_queue(request_queue_t *, request_fn_proc *);
extern void blk_cleanup_queue(request_queue_t *); extern void blk_cleanup_queue(request_queue_t *);
extern void blk_queue_make_request(request_queue_t *, make_request_fn *); extern void blk_queue_make_request(request_queue_t *, make_request_fn *);
extern void blk_queue_bounce_limit(request_queue_t *, unsigned long long); extern void blk_queue_bounce_limit(request_queue_t *, u64);
extern void blk_queue_max_sectors(request_queue_t *q, unsigned short); extern void blk_queue_max_sectors(request_queue_t *q, unsigned short);
extern void blk_queue_max_segments(request_queue_t *q, unsigned short); extern void blk_queue_max_segments(request_queue_t *q, unsigned short);
extern void blk_queue_max_segment_size(request_queue_t *q, unsigned int); extern void blk_queue_max_segment_size(request_queue_t *q, unsigned int);
......
...@@ -13,7 +13,7 @@ extern struct page *highmem_start_page; ...@@ -13,7 +13,7 @@ extern struct page *highmem_start_page;
/* declarations for linux/mm/highmem.c */ /* declarations for linux/mm/highmem.c */
unsigned int nr_free_highpages(void); unsigned int nr_free_highpages(void);
extern void create_bounce(struct bio **bio_orig, int gfp_mask); extern void create_bounce(unsigned long pfn, struct bio **bio_orig, int gfp_mask);
static inline char *bh_kmap(struct buffer_head *bh) static inline char *bh_kmap(struct buffer_head *bh)
{ {
......
This diff is collapsed.
...@@ -207,35 +207,31 @@ static LIST_HEAD(emergency_bhs); ...@@ -207,35 +207,31 @@ static LIST_HEAD(emergency_bhs);
* queue gfp mask set, *to may or may not be a highmem page. kmap it * queue gfp mask set, *to may or may not be a highmem page. kmap it
* always, it will do the Right Thing * always, it will do the Right Thing
*/ */
static inline void copy_from_high_bio(struct bio *to, struct bio *from) static inline void copy_to_high_bio_irq(struct bio *to, struct bio *from)
{ {
unsigned char *vto, *vfrom; unsigned char *vto, *vfrom;
unsigned long flags;
struct bio_vec *tovec, *fromvec;
int i;
if (unlikely(in_interrupt())) bio_for_each_segment(tovec, to, i) {
BUG(); fromvec = &from->bi_io_vec[i];
vto = bio_kmap(to);
vfrom = bio_kmap(from);
memcpy(vto, vfrom + bio_offset(from), bio_size(to));
bio_kunmap(from); /*
bio_kunmap(to); * not bounced
} */
if (tovec->bv_page == fromvec->bv_page)
continue;
static inline void copy_to_high_bio_irq(struct bio *to, struct bio *from) vfrom = page_address(fromvec->bv_page) + fromvec->bv_offset;
{
unsigned char *vto, *vfrom;
unsigned long flags;
__save_flags(flags); __save_flags(flags);
__cli(); __cli();
vto = kmap_atomic(bio_page(to), KM_BOUNCE_READ); vto = kmap_atomic(tovec->bv_page, KM_BOUNCE_READ);
vfrom = kmap_atomic(bio_page(from), KM_BOUNCE_READ); memcpy(vto + tovec->bv_offset, vfrom, to->bi_size);
memcpy(vto + bio_offset(to), vfrom, bio_size(to)); kunmap_atomic(vto, KM_BOUNCE_READ);
kunmap_atomic(vfrom, KM_BOUNCE_READ); __restore_flags(flags);
kunmap_atomic(vto, KM_BOUNCE_READ); }
__restore_flags(flags);
} }
static __init int init_emergency_pool(void) static __init int init_emergency_pool(void)
...@@ -347,15 +343,64 @@ struct page *alloc_bounce_page(int gfp_mask) ...@@ -347,15 +343,64 @@ struct page *alloc_bounce_page(int gfp_mask)
goto repeat_alloc; goto repeat_alloc;
} }
void create_bounce(struct bio **bio_orig, int gfp_mask) void create_bounce(unsigned long pfn, struct bio **bio_orig, int gfp_mask)
{ {
struct page *page; struct page *page;
struct bio *bio; struct bio *bio = NULL;
int i, rw = bio_data_dir(*bio_orig); int i, rw = bio_data_dir(*bio_orig);
struct bio_vec *to, *from;
BUG_ON((*bio_orig)->bi_idx); BUG_ON((*bio_orig)->bi_idx);
bio = bio_alloc(GFP_NOHIGHIO, (*bio_orig)->bi_vcnt); bio_for_each_segment(from, *bio_orig, i) {
page = from->bv_page;
/*
* is destination page below bounce pfn?
*/
if ((page - page->zone->zone_mem_map) + (page->zone->zone_start_paddr >> PAGE_SHIFT) < pfn)
continue;
/*
* irk, bounce it
*/
if (!bio)
bio = bio_alloc(GFP_NOHIGHIO, (*bio_orig)->bi_vcnt);
to = &bio->bi_io_vec[i];
to->bv_page = alloc_bounce_page(gfp_mask);
to->bv_len = from->bv_len;
to->bv_offset = from->bv_offset;
if (rw & WRITE) {
char *vto, *vfrom;
vto = page_address(to->bv_page) + to->bv_offset;
vfrom = kmap(from->bv_page);
memcpy(vto, vfrom + from->bv_offset, to->bv_len);
kunmap(to->bv_page);
}
}
/*
* no pages bounced
*/
if (!bio)
return;
/*
* at least one page was bounced, fill in possible non-highmem
* pages
*/
bio_for_each_segment(from, *bio_orig, i) {
to = &bio->bi_io_vec[i];
if (!to->bv_page) {
to->bv_page = from->bv_page;
to->bv_len = from->bv_len;
to->bv_offset = to->bv_offset;
}
}
bio->bi_dev = (*bio_orig)->bi_dev; bio->bi_dev = (*bio_orig)->bi_dev;
bio->bi_sector = (*bio_orig)->bi_sector; bio->bi_sector = (*bio_orig)->bi_sector;
...@@ -370,23 +415,6 @@ void create_bounce(struct bio **bio_orig, int gfp_mask) ...@@ -370,23 +415,6 @@ void create_bounce(struct bio **bio_orig, int gfp_mask)
else else
bio->bi_end_io = bounce_end_io_read; bio->bi_end_io = bounce_end_io_read;
for (i = 0; i < bio->bi_vcnt; i++) {
char *vto, *vfrom;
page = alloc_bounce_page(gfp_mask);
bio->bi_io_vec[i].bv_page = page;
bio->bi_io_vec[i].bv_len = (*bio_orig)->bi_io_vec[i].bv_len;
bio->bi_io_vec[i].bv_offset = 0;
if (rw & WRITE) {
vto = page_address(page);
vfrom = __bio_kmap(*bio_orig, i);
memcpy(vto, vfrom + __bio_offset(*bio_orig, i), bio->bi_io_vec[i].bv_len);
__bio_kunmap(bio, i);
}
}
bio->bi_private = *bio_orig; bio->bi_private = *bio_orig;
*bio_orig = bio; *bio_orig = bio;
} }
...@@ -47,6 +47,7 @@ ...@@ -47,6 +47,7 @@
#include <linux/route.h> #include <linux/route.h>
#include <linux/udp.h> #include <linux/udp.h>
#include <linux/proc_fs.h> #include <linux/proc_fs.h>
#include <linux/major.h>
#include <net/arp.h> #include <net/arp.h>
#include <net/ip.h> #include <net/ip.h>
#include <net/ipconfig.h> #include <net/ipconfig.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment