Commit 40e3262e authored by Dylan Reid's avatar Dylan Reid Committed by Mark Brown

ASoC: rt5677: make volume TLV closer to reality

The volume blocks have an step of 0.375dB, but TLV uses 0.01dB for
units.  Only use the resolution supported, ignoring the LSB of the
volume register.  This results in half the steps and 0.75dB per step,
but reports accurate levels through TLV.  Update the masks to reflect
that these are registers have the LSB ignored.
Signed-off-by: default avatarDylan Reid <dgreid@chromium.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 6fe17da0
......@@ -763,9 +763,9 @@ static int rt5677_set_dsp_vad(struct snd_soc_codec *codec, bool on)
}
static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0);
static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0);
static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -6525, 75, 0);
static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0);
static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0);
static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -1725, 75, 0);
static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
static const DECLARE_TLV_DB_SCALE(st_vol_tlv, -4650, 150, 0);
......@@ -817,13 +817,13 @@ static const struct snd_kcontrol_new rt5677_snd_controls[] = {
/* DAC Digital Volume */
SOC_DOUBLE_TLV("DAC1 Playback Volume", RT5677_DAC1_DIG_VOL,
RT5677_L_VOL_SFT, RT5677_R_VOL_SFT, 175, 0, dac_vol_tlv),
RT5677_L_VOL_SFT, RT5677_R_VOL_SFT, 87, 0, dac_vol_tlv),
SOC_DOUBLE_TLV("DAC2 Playback Volume", RT5677_DAC2_DIG_VOL,
RT5677_L_VOL_SFT, RT5677_R_VOL_SFT, 175, 0, dac_vol_tlv),
RT5677_L_VOL_SFT, RT5677_R_VOL_SFT, 87, 0, dac_vol_tlv),
SOC_DOUBLE_TLV("DAC3 Playback Volume", RT5677_DAC3_DIG_VOL,
RT5677_L_VOL_SFT, RT5677_R_VOL_SFT, 175, 0, dac_vol_tlv),
RT5677_L_VOL_SFT, RT5677_R_VOL_SFT, 87, 0, dac_vol_tlv),
SOC_DOUBLE_TLV("DAC4 Playback Volume", RT5677_DAC4_DIG_VOL,
RT5677_L_VOL_SFT, RT5677_R_VOL_SFT, 175, 0, dac_vol_tlv),
RT5677_L_VOL_SFT, RT5677_R_VOL_SFT, 87, 0, dac_vol_tlv),
/* IN1/IN2 Control */
SOC_SINGLE_TLV("IN1 Boost", RT5677_IN1, RT5677_BST_SFT1, 8, 0, bst_tlv),
......@@ -842,19 +842,19 @@ static const struct snd_kcontrol_new rt5677_snd_controls[] = {
RT5677_L_MUTE_SFT, RT5677_R_MUTE_SFT, 1, 1),
SOC_DOUBLE_TLV("ADC1 Capture Volume", RT5677_STO1_ADC_DIG_VOL,
RT5677_STO1_ADC_L_VOL_SFT, RT5677_STO1_ADC_R_VOL_SFT, 127, 0,
RT5677_STO1_ADC_L_VOL_SFT, RT5677_STO1_ADC_R_VOL_SFT, 63, 0,
adc_vol_tlv),
SOC_DOUBLE_TLV("ADC2 Capture Volume", RT5677_STO2_ADC_DIG_VOL,
RT5677_STO1_ADC_L_VOL_SFT, RT5677_STO1_ADC_R_VOL_SFT, 127, 0,
RT5677_STO1_ADC_L_VOL_SFT, RT5677_STO1_ADC_R_VOL_SFT, 63, 0,
adc_vol_tlv),
SOC_DOUBLE_TLV("ADC3 Capture Volume", RT5677_STO3_ADC_DIG_VOL,
RT5677_STO1_ADC_L_VOL_SFT, RT5677_STO1_ADC_R_VOL_SFT, 127, 0,
RT5677_STO1_ADC_L_VOL_SFT, RT5677_STO1_ADC_R_VOL_SFT, 63, 0,
adc_vol_tlv),
SOC_DOUBLE_TLV("ADC4 Capture Volume", RT5677_STO4_ADC_DIG_VOL,
RT5677_STO1_ADC_L_VOL_SFT, RT5677_STO1_ADC_R_VOL_SFT, 127, 0,
RT5677_STO1_ADC_L_VOL_SFT, RT5677_STO1_ADC_R_VOL_SFT, 63, 0,
adc_vol_tlv),
SOC_DOUBLE_TLV("Mono ADC Capture Volume", RT5677_MONO_ADC_DIG_VOL,
RT5677_MONO_ADC_L_VOL_SFT, RT5677_MONO_ADC_R_VOL_SFT, 127, 0,
RT5677_MONO_ADC_L_VOL_SFT, RT5677_MONO_ADC_R_VOL_SFT, 63, 0,
adc_vol_tlv),
/* Sidetone Control */
......
......@@ -306,10 +306,10 @@
#define RT5677_R_MUTE_SFT 7
#define RT5677_VOL_R_MUTE (0x1 << 6)
#define RT5677_VOL_R_SFT 6
#define RT5677_L_VOL_MASK (0x3f << 8)
#define RT5677_L_VOL_SFT 8
#define RT5677_R_VOL_MASK (0x3f)
#define RT5677_R_VOL_SFT 0
#define RT5677_L_VOL_MASK (0x7f << 9)
#define RT5677_L_VOL_SFT 9
#define RT5677_R_VOL_MASK (0x7f << 1)
#define RT5677_R_VOL_SFT 1
/* LOUT1 Control (0x01) */
#define RT5677_LOUT1_L_MUTE (0x1 << 15)
......@@ -447,16 +447,16 @@
#define RT5677_SEL_DAC2_R_SRC_SFT 0
/* Stereo1 ADC Digital Volume Control (0x1c) */
#define RT5677_STO1_ADC_L_VOL_MASK (0x7f << 8)
#define RT5677_STO1_ADC_L_VOL_SFT 8
#define RT5677_STO1_ADC_R_VOL_MASK (0x7f)
#define RT5677_STO1_ADC_R_VOL_SFT 0
#define RT5677_STO1_ADC_L_VOL_MASK (0x3f << 9)
#define RT5677_STO1_ADC_L_VOL_SFT 9
#define RT5677_STO1_ADC_R_VOL_MASK (0x3f << 1)
#define RT5677_STO1_ADC_R_VOL_SFT 1
/* Mono ADC Digital Volume Control (0x1d) */
#define RT5677_MONO_ADC_L_VOL_MASK (0x7f << 8)
#define RT5677_MONO_ADC_L_VOL_SFT 8
#define RT5677_MONO_ADC_R_VOL_MASK (0x7f)
#define RT5677_MONO_ADC_R_VOL_SFT 0
#define RT5677_MONO_ADC_L_VOL_MASK (0x3f << 9)
#define RT5677_MONO_ADC_L_VOL_SFT 9
#define RT5677_MONO_ADC_R_VOL_MASK (0x3f << 1)
#define RT5677_MONO_ADC_R_VOL_SFT 1
/* Stereo 1/2 ADC Boost Gain Control (0x1e) */
#define RT5677_STO1_ADC_L_BST_MASK (0x3 << 14)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment