Commit 412b032a authored by Andrey Smirnov's avatar Andrey Smirnov Committed by Shawn Guo

ARM: dts: imx7d: Specify IMX7D_CLK_IPG as "ipg" clock to SDMA

Since 25aaa75d SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX7D_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX7D_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.
Signed-off-by: default avatarAndrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 89791177
...@@ -1155,8 +1155,8 @@ sdma: sdma@30bd0000 { ...@@ -1155,8 +1155,8 @@ sdma: sdma@30bd0000 {
compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
reg = <0x30bd0000 0x10000>; reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_SDMA_CORE_CLK>, clocks = <&clks IMX7D_IPG_ROOT_CLK>,
<&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; <&clks IMX7D_SDMA_CORE_CLK>;
clock-names = "ipg", "ahb"; clock-names = "ipg", "ahb";
#dma-cells = <3>; #dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment