ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow

To enable TDM mode, the current control flow limits the function
calling order should be 'set_tdm_slot->set_dai_fmt'. But not all
platform sound card like as simeple card to follow this design.
To bypass this limit, adjust the DAI format setting in runtime
'hw_param' callback.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://msgid.link/r/c4c8df00d8d179b8b5b39a8521de3a85325c57e8.1703813842.git.cy_huang@richtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/rtq9128.c

@@ -59,6 +59,7 @@
 
 struct rtq9128_data {
 	struct gpio_desc *enable;
+	unsigned int daifmt;
 	int tdm_slots;
 	int tdm_slot_width;
 	bool tdm_input_data2_select;
@@ -441,10 +442,7 @@ static const struct snd_soc_component_driver rtq9128_comp_driver = {
 static int rtq9128_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct rtq9128_data *data = snd_soc_dai_get_drvdata(dai);
-	struct snd_soc_component *comp = dai->component;
 	struct device *dev = dai->dev;
-	unsigned int audfmt, fmtval;
-	int ret;
 
 	dev_dbg(dev, "%s: fmt 0x%8x\n", __func__, fmt);
 
@@ -454,35 +452,10 @@ static int rtq9128_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		return -EINVAL;
 	}
 
-	fmtval = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
-	if (data->tdm_slots && fmtval != SND_SOC_DAIFMT_DSP_A && fmtval != SND_SOC_DAIFMT_DSP_B) {
-		dev_err(dev, "TDM is used, format only support DSP_A or DSP_B\n");
-		return -EINVAL;
-	}
+	/* Store here and will be used in runtime hw_params for DAI format setting */
+	data->daifmt = fmt;
 
-	switch (fmtval) {
-	case SND_SOC_DAIFMT_I2S:
-		audfmt = 8;
-		break;
-	case SND_SOC_DAIFMT_LEFT_J:
-		audfmt = 9;
-		break;
-	case SND_SOC_DAIFMT_RIGHT_J:
-		audfmt = 10;
-		break;
-	case SND_SOC_DAIFMT_DSP_A:
-		audfmt = data->tdm_slots ? 12 : 11;
-		break;
-	case SND_SOC_DAIFMT_DSP_B:
-		audfmt = data->tdm_slots ? 4 : 3;
-		break;
-	default:
-		dev_err(dev, "Unsupported format 0x%8x\n", fmt);
-		return -EINVAL;
-	}
-
-	ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDFMT_MASK, audfmt);
-	return ret < 0 ? ret : 0;
+	return 0;
 }
 
 static int rtq9128_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
@@ -558,10 +531,38 @@ static int rtq9128_dai_hw_params(struct snd_pcm_substream *stream, struct snd_pc
 	unsigned int width, slot_width, bitrate, audbit, dolen;
 	struct snd_soc_component *comp = dai->component;
 	struct device *dev = dai->dev;
+	unsigned int fmtval, audfmt;
 	int ret;
 
 	dev_dbg(dev, "%s: width %d\n", __func__, params_width(param));
 
+	fmtval = FIELD_GET(SND_SOC_DAIFMT_FORMAT_MASK, data->daifmt);
+	if (data->tdm_slots && fmtval != SND_SOC_DAIFMT_DSP_A && fmtval != SND_SOC_DAIFMT_DSP_B) {
+		dev_err(dev, "TDM is used, format only support DSP_A or DSP_B\n");
+		return -EINVAL;
+	}
+
+	switch (fmtval) {
+	case SND_SOC_DAIFMT_I2S:
+		audfmt = 8;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		audfmt = 9;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		audfmt = 10;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		audfmt = data->tdm_slots ? 12 : 11;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		audfmt = data->tdm_slots ? 4 : 3;
+		break;
+	default:
+		dev_err(dev, "Unsupported format 0x%8x\n", fmtval);
+		return -EINVAL;
+	}
+
 	switch (width = params_width(param)) {
 	case 16:
 		audbit = 0;
@@ -615,6 +616,10 @@ static int rtq9128_dai_hw_params(struct snd_pcm_substream *stream, struct snd_pc
 		return -EINVAL;
 	}
 
+	ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDFMT_MASK, audfmt);
+	if (ret < 0)
+		return ret;
+
 	ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDBIT_MASK, audbit);
 	if (ret < 0)
 		return ret;