Commit 417e008b authored by Martin Kepplinger's avatar Martin Kepplinger Committed by Jonathan Cameron

iio: mma8452: add support for MMA8652FC and MMA8653FC

MMA8652FC and MMA8653FC don't provide the transient interrupt source, so
the motion interrupt source is used by providing a new iio_chan_spec
definition, so that other supported devices are not affected by this.

Datasheets for the newly supported devices are available at Freescale's
website:

http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8652FC.pdf
http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8653FC.pdfSigned-off-by: default avatarMartin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: default avatarChristoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 60f562e7
Freescale MMA8452Q or MMA8453Q triaxial accelerometer
Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer
Required properties:
- compatible: should contain one of
* "fsl,mma8452"
* "fsl,mma8453"
* "fsl,mma8652"
* "fsl,mma8653"
- reg: the I2C address of the chip
Optional properties:
......
......@@ -106,7 +106,7 @@ config MMA8452
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the following Freescale 3-axis
accelerometers: MMA8452Q, MMA8453Q.
accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
To compile this driver as a module, choose M here: the module
will be called mma8452.
......
......@@ -3,6 +3,8 @@
*
* MMA8452Q (12 bit)
* MMA8453Q (10 bit)
* MMA8652FC (12 bit)
* MMA8653FC (10 bit)
*
* Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net>
*
......@@ -84,6 +86,8 @@
#define MMA8452_DEVICE_ID 0x2a
#define MMA8453_DEVICE_ID 0x3a
#define MMA8652_DEVICE_ID 0x4a
#define MMA8653_DEVICE_ID 0x5a
struct mma8452_data {
struct i2c_client *client;
......@@ -791,6 +795,26 @@ static struct attribute_group mma8452_event_attribute_group = {
.num_event_specs = ARRAY_SIZE(mma8452_transient_event), \
}
#define MMA8652_CHANNEL(axis, idx, bits) { \
.type = IIO_ACCEL, \
.modified = 1, \
.channel2 = IIO_MOD_##axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_CALIBBIAS), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
BIT(IIO_CHAN_INFO_SCALE), \
.scan_index = idx, \
.scan_type = { \
.sign = 's', \
.realbits = (bits), \
.storagebits = 16, \
.shift = 16 - (bits), \
.endianness = IIO_BE, \
}, \
.event_spec = mma8452_motion_event, \
.num_event_specs = ARRAY_SIZE(mma8452_motion_event), \
}
static const struct iio_chan_spec mma8452_channels[] = {
MMA8452_CHANNEL(X, 0, 12),
MMA8452_CHANNEL(Y, 1, 12),
......@@ -805,9 +829,25 @@ static const struct iio_chan_spec mma8453_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3),
};
static const struct iio_chan_spec mma8652_channels[] = {
MMA8652_CHANNEL(X, 0, 12),
MMA8652_CHANNEL(Y, 1, 12),
MMA8652_CHANNEL(Z, 2, 12),
IIO_CHAN_SOFT_TIMESTAMP(3),
};
static const struct iio_chan_spec mma8653_channels[] = {
MMA8652_CHANNEL(X, 0, 10),
MMA8652_CHANNEL(Y, 1, 10),
MMA8652_CHANNEL(Z, 2, 10),
IIO_CHAN_SOFT_TIMESTAMP(3),
};
enum {
mma8452,
mma8453,
mma8652,
mma8653,
};
static const struct mma_chip_info mma_chip_info_table[] = {
......@@ -850,6 +890,38 @@ static const struct mma_chip_info mma_chip_info_table[] = {
.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
.ev_count = MMA8452_TRANSIENT_COUNT,
},
[mma8652] = {
.chip_id = MMA8652_DEVICE_ID,
.channels = mma8652_channels,
.num_channels = ARRAY_SIZE(mma8652_channels),
.mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} },
.ev_cfg = MMA8452_FF_MT_CFG,
.ev_cfg_ele = MMA8452_FF_MT_CFG_ELE,
.ev_cfg_chan_shift = 3,
.ev_src = MMA8452_FF_MT_SRC,
.ev_src_xe = MMA8452_FF_MT_SRC_XHE,
.ev_src_ye = MMA8452_FF_MT_SRC_YHE,
.ev_src_ze = MMA8452_FF_MT_SRC_ZHE,
.ev_ths = MMA8452_FF_MT_THS,
.ev_ths_mask = MMA8452_FF_MT_THS_MASK,
.ev_count = MMA8452_FF_MT_COUNT,
},
[mma8653] = {
.chip_id = MMA8653_DEVICE_ID,
.channels = mma8653_channels,
.num_channels = ARRAY_SIZE(mma8653_channels),
.mma_scales = { {0, 38307}, {0, 76614}, {0, 153228} },
.ev_cfg = MMA8452_FF_MT_CFG,
.ev_cfg_ele = MMA8452_FF_MT_CFG_ELE,
.ev_cfg_chan_shift = 3,
.ev_src = MMA8452_FF_MT_SRC,
.ev_src_xe = MMA8452_FF_MT_SRC_XHE,
.ev_src_ye = MMA8452_FF_MT_SRC_YHE,
.ev_src_ze = MMA8452_FF_MT_SRC_ZHE,
.ev_ths = MMA8452_FF_MT_THS,
.ev_ths_mask = MMA8452_FF_MT_THS_MASK,
.ev_count = MMA8452_FF_MT_COUNT,
},
};
static struct attribute *mma8452_attributes[] = {
......@@ -972,6 +1044,8 @@ static int mma8452_reset(struct i2c_client *client)
static const struct of_device_id mma8452_dt_ids[] = {
{ .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] },
{ .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] },
{ .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] },
{ .compatible = "fsl,mma8653", .data = &mma_chip_info_table[mma8653] },
{ }
};
MODULE_DEVICE_TABLE(of, mma8452_dt_ids);
......@@ -984,13 +1058,6 @@ static int mma8452_probe(struct i2c_client *client,
int ret;
const struct of_device_id *match;
ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
if (ret < 0)
return ret;
if (ret != MMA8452_DEVICE_ID && ret != MMA8453_DEVICE_ID)
return -ENODEV;
match = of_match_device(mma8452_dt_ids, &client->dev);
if (!match) {
dev_err(&client->dev, "unknown device model\n");
......@@ -1006,6 +1073,21 @@ static int mma8452_probe(struct i2c_client *client,
mutex_init(&data->lock);
data->chip_info = match->data;
ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
if (ret < 0)
return ret;
switch (ret) {
case MMA8452_DEVICE_ID:
case MMA8453_DEVICE_ID:
case MMA8652_DEVICE_ID:
case MMA8653_DEVICE_ID:
if (ret == data->chip_info->chip_id)
break;
default:
return -ENODEV;
}
dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
match->compatible, data->chip_info->chip_id);
......@@ -1138,6 +1220,8 @@ static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume);
static const struct i2c_device_id mma8452_id[] = {
{ "mma8452", mma8452 },
{ "mma8453", mma8453 },
{ "mma8652", mma8652 },
{ "mma8653", mma8653 },
{ }
};
MODULE_DEVICE_TABLE(i2c, mma8452_id);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment