Commit 60f562e7 authored by Martin Kepplinger's avatar Martin Kepplinger Committed by Jonathan Cameron

iio: mma8452: add freefall / motion interrupt source

This adds the freefall / motion interrupt source definitions to the driver.
It is used in this series' next patch, for chips that don't support the
transient interrupt source.
Signed-off-by: default avatarMartin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: default avatarChristoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent c5ea1b58
......@@ -42,6 +42,16 @@
#define MMA8452_DATA_CFG_HPF_MASK BIT(4)
#define MMA8452_HP_FILTER_CUTOFF 0x0f
#define MMA8452_HP_FILTER_CUTOFF_SEL_MASK GENMASK(1, 0)
#define MMA8452_FF_MT_CFG 0x15
#define MMA8452_FF_MT_CFG_OAE BIT(6)
#define MMA8452_FF_MT_CFG_ELE BIT(7)
#define MMA8452_FF_MT_SRC 0x16
#define MMA8452_FF_MT_SRC_XHE BIT(1)
#define MMA8452_FF_MT_SRC_YHE BIT(3)
#define MMA8452_FF_MT_SRC_ZHE BIT(5)
#define MMA8452_FF_MT_THS 0x17
#define MMA8452_FF_MT_THS_MASK 0x7f
#define MMA8452_FF_MT_COUNT 0x18
#define MMA8452_TRANSIENT_CFG 0x1d
#define MMA8452_TRANSIENT_CFG_HPF_BYP BIT(0)
#define MMA8452_TRANSIENT_CFG_CHAN(chan) BIT(chan + 1)
......@@ -69,6 +79,7 @@
#define MMA8452_MAX_REG 0x31
#define MMA8452_INT_DRDY BIT(0)
#define MMA8452_INT_FF_MT BIT(2)
#define MMA8452_INT_TRANS BIT(5)
#define MMA8452_DEVICE_ID 0x2a
......@@ -613,7 +624,8 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev,
else
val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift);
val |= MMA8452_TRANSIENT_CFG_ELE;
val |= chip->ev_cfg_ele;
val |= MMA8452_FF_MT_CFG_OAE;
return mma8452_change_config(data, chip->ev_cfg, val);
}
......@@ -654,6 +666,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
{
struct iio_dev *indio_dev = p;
struct mma8452_data *data = iio_priv(indio_dev);
const struct mma_chip_info *chip = data->chip_info;
int ret = IRQ_NONE;
int src;
......@@ -666,7 +679,10 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
ret = IRQ_HANDLED;
}
if (src & MMA8452_INT_TRANS) {
if ((src & MMA8452_INT_TRANS &&
chip->ev_src == MMA8452_TRANSIENT_SRC) ||
(src & MMA8452_INT_FF_MT &&
chip->ev_src == MMA8452_FF_MT_SRC)) {
mma8452_transient_interrupt(indio_dev);
ret = IRQ_HANDLED;
}
......@@ -728,6 +744,16 @@ static const struct iio_event_spec mma8452_transient_event[] = {
},
};
static const struct iio_event_spec mma8452_motion_event[] = {
{
.type = IIO_EV_TYPE_MAG,
.dir = IIO_EV_DIR_RISING,
.mask_separate = BIT(IIO_EV_INFO_ENABLE),
.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_PERIOD)
},
};
/*
* Threshold is configured in fixed 8G/127 steps regardless of
* currently selected scale for measurement.
......@@ -1013,13 +1039,15 @@ static int mma8452_probe(struct i2c_client *client,
if (client->irq) {
/*
* Although we enable the transient interrupt source once and
* for all here the transient event detection itself is not
* enabled until userspace asks for it by
* mma8452_write_event_config()
* Although we enable the interrupt sources once and for
* all here the event detection itself is not enabled until
* userspace asks for it by mma8452_write_event_config()
*/
int supported_interrupts = MMA8452_INT_DRDY | MMA8452_INT_TRANS;
int enabled_interrupts = MMA8452_INT_TRANS;
int supported_interrupts = MMA8452_INT_DRDY |
MMA8452_INT_TRANS |
MMA8452_INT_FF_MT;
int enabled_interrupts = MMA8452_INT_TRANS |
MMA8452_INT_FF_MT;
/* Assume wired to INT1 pin */
ret = i2c_smbus_write_byte_data(client,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment