Commit 418bd0d4 authored by Bryan Wu's avatar Bryan Wu Committed by David S. Miller

netdev/fec: fix ifconfig eth0 down hang issue

BugLink: http://bugs.launchpad.net/bugs/559065

In fec open/close function, we need to use phy_connect and phy_disconnect
operation before we start/stop phy. Otherwise it will cause system hang.

Only call fec_enet_mii_probe() in open function, because the first open
action will cause NULL pointer error.
Signed-off-by: default avatarBryan Wu <bryan.wu@canonical.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b58ffb41
......@@ -681,6 +681,8 @@ static int fec_enet_mii_probe(struct net_device *dev)
struct phy_device *phy_dev = NULL;
int phy_addr;
fep->phy_dev = NULL;
/* find the first phy */
for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
if (fep->mii_bus->phy_map[phy_addr]) {
......@@ -711,6 +713,11 @@ static int fec_enet_mii_probe(struct net_device *dev)
fep->link = 0;
fep->full_duplex = 0;
printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] "
"(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
fep->phy_dev->irq);
return 0;
}
......@@ -756,13 +763,8 @@ static int fec_enet_mii_init(struct platform_device *pdev)
if (mdiobus_register(fep->mii_bus))
goto err_out_free_mdio_irq;
if (fec_enet_mii_probe(dev) != 0)
goto err_out_unregister_bus;
return 0;
err_out_unregister_bus:
mdiobus_unregister(fep->mii_bus);
err_out_free_mdio_irq:
kfree(fep->mii_bus->irq);
err_out_free_mdiobus:
......@@ -915,7 +917,12 @@ fec_enet_open(struct net_device *dev)
if (ret)
return ret;
/* schedule a link state check */
/* Probe and connect to PHY when open the interface */
ret = fec_enet_mii_probe(dev);
if (ret) {
fec_enet_free_buffers(dev);
return ret;
}
phy_start(fep->phy_dev);
netif_start_queue(dev);
fep->opened = 1;
......@@ -929,10 +936,12 @@ fec_enet_close(struct net_device *dev)
/* Don't know what to do yet. */
fep->opened = 0;
phy_stop(fep->phy_dev);
netif_stop_queue(dev);
fec_stop(dev);
if (fep->phy_dev)
phy_disconnect(fep->phy_dev);
fec_enet_free_buffers(dev);
return 0;
......@@ -1316,11 +1325,6 @@ fec_probe(struct platform_device *pdev)
if (ret)
goto failed_register;
printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] "
"(mii_bus:phy_addr=%s, irq=%d)\n", ndev->name,
fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
fep->phy_dev->irq);
return 0;
failed_register:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment