Commit 419e202b authored by Lucas Stach's avatar Lucas Stach Committed by Shawn Guo

ARM: dts: imx6: add Vivante GPU nodes

This adds the device nodes for 2D, 3D and VG GPU cores.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: default avatarLucas Stach <l.stach@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent cfa1dd99
......@@ -104,6 +104,11 @@ display-subsystem {
compatible = "fsl,imx-display-subsystem";
ports = <&ipu1_di0>, <&ipu1_di1>;
};
gpu-subsystem {
compatible = "fsl,imx-gpu-subsystem";
cores = <&gpu_2d>, <&gpu_3d>;
};
};
&gpt {
......
......@@ -154,6 +154,16 @@ sata: sata@02200000 {
status = "disabled";
};
gpu_vg: gpu@02204000 {
compatible = "vivante,gc";
reg = <0x02204000 0x4000>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
<&clks IMX6QDL_CLK_GPU2D_CORE>;
clock-names = "bus", "core";
power-domains = <&gpc 1>;
};
ipu2: ipu@02800000 {
#address-cells = <1>;
#size-cells = <0>;
......@@ -226,6 +236,11 @@ display-subsystem {
compatible = "fsl,imx-display-subsystem";
ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
};
gpu-subsystem {
compatible = "fsl,imx-gpu-subsystem";
cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>;
};
};
&hdmi {
......
......@@ -139,6 +139,27 @@ hdmi_mux_1: endpoint {
};
};
gpu_3d: gpu@00130000 {
compatible = "vivante,gc";
reg = <0x00130000 0x4000>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
<&clks IMX6QDL_CLK_GPU3D_CORE>,
<&clks IMX6QDL_CLK_GPU3D_SHADER>;
clock-names = "bus", "core", "shader";
power-domains = <&gpc 1>;
};
gpu_2d: gpu@00134000 {
compatible = "vivante,gc";
reg = <0x00134000 0x4000>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
<&clks IMX6QDL_CLK_GPU2D_CORE>;
clock-names = "bus", "core";
power-domains = <&gpc 1>;
};
timer@00a00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment