extcon: Unify the jig cable names on rt8973 and max14577/77693/77843

This patch change the name of various jig cables as 'JIG' because the name of
various jig cables are strange and ambiguous on user-space aspect. They include
the different information of either USB and UART state. It is never important
for user-space process. This patch unifies the name of jig cables as following:
- JIG-USB-ON   -->|--> JIG
- JIG-USB-OFF  -->|
- JIG-UART-ON  -->|
- JIG-UART-OFF -->|
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

drivers/extcon/extcon-max14577.c

@@ -155,10 +155,7 @@ enum {
 	EXTCON_CABLE_FAST_CHARGER,
 	EXTCON_CABLE_SLOW_CHARGER,
 	EXTCON_CABLE_CHARGE_DOWNSTREAM,
-	EXTCON_CABLE_JIG_USB_ON,
-	EXTCON_CABLE_JIG_USB_OFF,
-	EXTCON_CABLE_JIG_UART_OFF,
-	EXTCON_CABLE_JIG_UART_ON,
+	EXTCON_CABLE_JIG,
 
 	_EXTCON_CABLE_NUM,
 };
@@ -169,10 +166,7 @@ static const char *max14577_extcon_cable[] = {
 	[EXTCON_CABLE_FAST_CHARGER]		= "Fast-charger",
 	[EXTCON_CABLE_SLOW_CHARGER]		= "Slow-charger",
 	[EXTCON_CABLE_CHARGE_DOWNSTREAM]	= "Charge-downstream",
-	[EXTCON_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
-	[EXTCON_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
-	[EXTCON_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
+	[EXTCON_CABLE_JIG]			= "JIG",
 
 	NULL,
 };
@@ -348,7 +342,6 @@ static int max14577_muic_get_cable_type(struct max14577_muic_info *info,
 static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 		int cable_type, bool attached)
 {
-	char cable_name[32];
 	int ret = 0;
 	u8 path = CTRL1_SW_OPEN;
 
@@ -358,18 +351,12 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 
 	switch (cable_type) {
 	case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF:	/* ADC_JIG_USB_OFF */
-		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-OFF");
-		path = CTRL1_SW_USB;
-		break;
 	case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON:	/* ADC_JIG_USB_ON */
 		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-ON");
 		path = CTRL1_SW_USB;
 		break;
 	case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF:	/* ADC_JIG_UART_OFF */
 		/* PATH:AP_UART */
-		strcpy(cable_name, "JIG-UART-OFF");
 		path = CTRL1_SW_UART;
 		break;
 	default:
@@ -382,7 +369,7 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state(info->edev, cable_name, attached);
+	extcon_set_cable_state(info->edev, "JIG", attached);
 
 	return 0;
 }

drivers/extcon/extcon-max77693.c

@@ -209,10 +209,7 @@ enum {
 	EXTCON_CABLE_CHARGE_DOWNSTREAM,
 	EXTCON_CABLE_MHL,
 	EXTCON_CABLE_MHL_TA,
-	EXTCON_CABLE_JIG_USB_ON,
-	EXTCON_CABLE_JIG_USB_OFF,
-	EXTCON_CABLE_JIG_UART_OFF,
-	EXTCON_CABLE_JIG_UART_ON,
+	EXTCON_CABLE_JIG,
 	EXTCON_CABLE_DOCK_SMART,
 	EXTCON_CABLE_DOCK_DESK,
 	EXTCON_CABLE_DOCK_AUDIO,
@@ -229,10 +226,7 @@ static const char *max77693_extcon_cable[] = {
 	[EXTCON_CABLE_CHARGE_DOWNSTREAM]	= "Charge-downstream",
 	[EXTCON_CABLE_MHL]			= "MHL",
 	[EXTCON_CABLE_MHL_TA]			= "MHL-TA",
-	[EXTCON_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
-	[EXTCON_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
-	[EXTCON_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
+	[EXTCON_CABLE_JIG]			= "JIG",
 	[EXTCON_CABLE_DOCK_SMART]		= "Dock-Smart",
 	[EXTCON_CABLE_DOCK_DESK]		= "Dock-Desk",
 	[EXTCON_CABLE_DOCK_AUDIO]		= "Dock-Audio",
@@ -642,7 +636,6 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 		int cable_type, bool attached)
 {
-	char cable_name[32];
 	int ret = 0;
 	u8 path = CONTROL1_SW_OPEN;
 
@@ -652,23 +645,13 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 
 	switch (cable_type) {
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:	/* ADC_JIG_USB_OFF */
-		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-OFF");
-		path = CONTROL1_SW_USB;
-		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:	/* ADC_JIG_USB_ON */
 		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-ON");
 		path = CONTROL1_SW_USB;
 		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:	/* ADC_JIG_UART_OFF */
-		/* PATH:AP_UART */
-		strcpy(cable_name, "JIG-UART-OFF");
-		path = CONTROL1_SW_UART;
-		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* ADC_JIG_UART_ON */
 		/* PATH:AP_UART */
-		strcpy(cable_name, "JIG-UART-ON");
 		path = CONTROL1_SW_UART;
 		break;
 	default:
@@ -681,7 +664,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state(info->edev, cable_name, attached);
+	extcon_set_cable_state(info->edev, "JIG", attached);
 
 	return 0;
 }

drivers/extcon/extcon-max77843.c

@@ -127,10 +127,7 @@ enum {
 	MAX77843_CABLE_SLOW_CHARGER,
 	MAX77843_CABLE_MHL,
 	MAX77843_CABLE_MHL_TA,
-	MAX77843_CABLE_JIG_USB_ON,
-	MAX77843_CABLE_JIG_USB_OFF,
-	MAX77843_CABLE_JIG_UART_ON,
-	MAX77843_CABLE_JIG_UART_OFF,
+	MAX77843_CABLE_JIG,
 
 	MAX77843_CABLE_NUM,
 };
@@ -144,10 +141,7 @@ static const char *max77843_extcon_cable[] = {
 	[MAX77843_CABLE_SLOW_CHARGER]		= "SLOW-CHARGER",
 	[MAX77843_CABLE_MHL]			= "MHL",
 	[MAX77843_CABLE_MHL_TA]			= "MHL-TA",
-	[MAX77843_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
-	[MAX77843_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
-	[MAX77843_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
-	[MAX77843_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
+	[MAX77843_CABLE_JIG]			= "JIG",
 };
 
 struct max77843_muic_irq {
@@ -385,36 +379,29 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
 		int cable_type, bool attached)
 {
 	int ret;
+	u8 path = CONTROL1_SW_OPEN;
 
 	dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
 			attached ? "attached" : "detached", cable_type);
 
 	switch (cable_type) {
 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
-		if (ret < 0)
-			return ret;
-		extcon_set_cable_state(info->edev, "JIG-USB-OFF", attached);
-		break;
 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
-		if (ret < 0)
-			return ret;
-		extcon_set_cable_state(info->edev, "JIG-USB-ON", attached);
+		path = CONTROL1_SW_USB;
 		break;
 	case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_UART, attached);
-		if (ret < 0)
-			return ret;
-		extcon_set_cable_state(info->edev, "JIG-UART-OFF", attached);
+		path = CONTROL1_SW_UART;
 		break;
 	default:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
-		if (ret < 0)
-			return ret;
-		break;
+		return -EINVAL;
 	}
 
+	ret = max77843_muic_set_path(info, path, attached);
+	if (ret < 0)
+		return ret;
+
+	extcon_set_cable_state(info->edev, "JIG", attached);
+
 	return 0;
 }
 

drivers/extcon/extcon-rt8973a.c

@@ -94,10 +94,7 @@ enum {
 	EXTCON_CABLE_USB = 0,
 	EXTCON_CABLE_USB_HOST,
 	EXTCON_CABLE_TA,
-	EXTCON_CABLE_JIG_OFF_USB,
-	EXTCON_CABLE_JIG_ON_USB,
-	EXTCON_CABLE_JIG_OFF_UART,
-	EXTCON_CABLE_JIG_ON_UART,
+	EXTCON_CABLE_JIG,
 
 	EXTCON_CABLE_END,
 };
@@ -106,10 +103,7 @@ static const char *rt8973a_extcon_cable[] = {
 	[EXTCON_CABLE_USB]		= "USB",
 	[EXTCON_CABLE_USB_HOST]		= "USB-Host",
 	[EXTCON_CABLE_TA]		= "TA",
-	[EXTCON_CABLE_JIG_OFF_USB]	= "JIG-USB-OFF",
-	[EXTCON_CABLE_JIG_ON_USB]	= "JIG-USB-ON",
-	[EXTCON_CABLE_JIG_OFF_UART]	= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_ON_UART]	= "JIG-UART-ON",
+	[EXTCON_CABLE_JIG]		= "JIG",
 	NULL,
 };
 
@@ -355,19 +349,13 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 		con_sw = DM_DP_SWITCH_OPEN;
 		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
-		idx = EXTCON_CABLE_JIG_OFF_USB;
-		con_sw = DM_DP_SWITCH_UART;
-		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
-		idx = EXTCON_CABLE_JIG_ON_USB;
-		con_sw = DM_DP_SWITCH_UART;
+		idx = EXTCON_CABLE_JIG;
+		con_sw = DM_DP_SWITCH_USB;
 		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
-		idx = EXTCON_CABLE_JIG_OFF_UART;
-		con_sw = DM_DP_SWITCH_UART;
-		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
-		idx = EXTCON_CABLE_JIG_ON_UART;
+		idx = EXTCON_CABLE_JIG;
 		con_sw = DM_DP_SWITCH_UART;
 		break;
 	case RT8973A_MUIC_ADC_USB: