Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:

 - A fix for OMAP5 and DRA7 to make the branch predictor hardening
   settings take proper effect on secondary cores

 - Disable USB OTG on am3517 since current driver isn't working

 - Fix thermal sensor register settings on Armada 38x

 - Fix suspend/resume IRQs on pxa3xx

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: am3517.dtsi:  Disable reference to OMAP3 OTG controller
  ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores
  ARM: pxa: irq: fix handling of ICMR registers in suspend/resume
  ARM: dts: armada-38x: use the new thermal binding

arch/arm/boot/dts/am3517.dtsi

@@ -91,6 +91,11 @@ hecc: can@5c050000 {
 	};
 };
 
+/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
+&usb_otg_hs {
+	status = "disabled";
+};
+
 &iva {
 	status = "disabled";
 };

arch/arm/boot/dts/armada-38x.dtsi

@@ -547,7 +547,7 @@ coredivclk: clock@e4250 {
 
 			thermal: thermal@e8078 {
 				compatible = "marvell,armada380-thermal";
-				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				reg = <0xe4078 0x4>, <0xe4070 0x8>;
 				status = "okay";
 			};
 

arch/arm/mach-omap2/omap-smp.c

@@ -109,6 +109,45 @@ void omap5_erratum_workaround_801819(void)
 static inline void omap5_erratum_workaround_801819(void) { }
 #endif
 
+#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR
+/*
+ * Configure ACR and enable ACTLR[0] (Enable invalidates of BTB with
+ * ICIALLU) to activate the workaround for secondary Core.
+ * NOTE: it is assumed that the primary core's configuration is done
+ * by the boot loader (kernel will detect a misconfiguration and complain
+ * if this is not done).
+ *
+ * In General Purpose(GP) devices, ACR bit settings can only be done
+ * by ROM code in "secure world" using the smc call and there is no
+ * option to update the "firmware" on such devices. This also works for
+ * High security(HS) devices, as a backup option in case the
+ * "update" is not done in the "security firmware".
+ */
+static void omap5_secondary_harden_predictor(void)
+{
+	u32 acr, acr_mask;
+
+	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+
+	/*
+	 * ACTLR[0] (Enable invalidates of BTB with ICIALLU)
+	 */
+	acr_mask = BIT(0);
+
+	/* Do we already have it done.. if yes, skip expensive smc */
+	if ((acr & acr_mask) == acr_mask)
+		return;
+
+	acr |= acr_mask;
+	omap_smc1(OMAP5_DRA7_MON_SET_ACR_INDEX, acr);
+
+	pr_debug("%s: ARM ACR setup for CVE_2017_5715 applied on CPU%d\n",
+		 __func__, smp_processor_id());
+}
+#else
+static inline void omap5_secondary_harden_predictor(void) { }
+#endif
+
 static void omap4_secondary_init(unsigned int cpu)
 {
 	/*
@@ -131,6 +170,8 @@ static void omap4_secondary_init(unsigned int cpu)
 		set_cntfreq();
 		/* Configure ACR to disable streaming WA for 801819 */
 		omap5_erratum_workaround_801819();
+		/* Enable ACR to allow for ICUALLU workaround */
+		omap5_secondary_harden_predictor();
 	}
 
 	/*

arch/arm/mach-pxa/irq.c

@@ -185,7 +185,7 @@ static int pxa_irq_suspend(void)
 {
 	int i;
 
-	for (i = 0; i < pxa_internal_irq_nr / 32; i++) {
+	for (i = 0; i < DIV_ROUND_UP(pxa_internal_irq_nr, 32); i++) {
 		void __iomem *base = irq_base(i);
 
 		saved_icmr[i] = __raw_readl(base + ICMR);
@@ -204,7 +204,7 @@ static void pxa_irq_resume(void)
 {
 	int i;
 
-	for (i = 0; i < pxa_internal_irq_nr / 32; i++) {
+	for (i = 0; i < DIV_ROUND_UP(pxa_internal_irq_nr, 32); i++) {
 		void __iomem *base = irq_base(i);
 
 		__raw_writel(saved_icmr[i], base + ICMR);