arm64: dts: imx8mq-librem5: Set charger parameters for each batch

Correctly set regulation-voltage, termination-current and charge-current
for the different librem 5 board revisions.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts

@@ -12,18 +12,16 @@ / {
 	compatible = "purism,librem5r2", "purism,librem5", "fsl,imx8mq";
 };
 
-&bq25895 {
-	ti,battery-regulation-voltage = <4192000>; /* uV */
-	ti,charge-current = <1600000>; /* uA */
-	ti,termination-current = <66000>;  /* uA */
-};
-
 &accel_gyro {
 	mount-matrix =  "1",  "0",  "0",
 			"0", "-1",  "0",
 			"0",  "0",  "1";
 };
 
+&bq25895 {
+	ti,charge-current = <1600000>; /* uA */
+};
+
 &proximity {
 	proximity-near-level = <120>;
 };

arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi

@@ -22,9 +22,7 @@ &accel_gyro {
 };
 
 &bq25895 {
-	ti,battery-regulation-voltage = <4200000>; /* uV */
 	ti,charge-current = <1500000>; /* uA */
-	ti,termination-current = <144000>;  /* uA */
 };
 
 &camera_front {

arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi

@@ -1147,7 +1147,9 @@ bq25895: charger@6a {
 		interrupt-parent = <&gpio3>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 		phys = <&usb3_phy0>;
-		ti,precharge-current = <130000>; /* uA */
+		ti,battery-regulation-voltage = <4208000>; /* uV */
+		ti,termination-current = <128000>;  /* uA */
+		ti,precharge-current = <128000>; /* uA */
 		ti,minimum-sys-voltage = <3700000>; /* uV */
 		ti,boost-voltage = <5000000>; /* uV */
 		ti,boost-max-current = <1500000>; /* uA */