Commit 4203d644 authored by Andrew Bresticker's avatar Andrew Bresticker Committed by Ralf Baechle

MIPS: Malta: Use generic plat_irq_dispatch

The generic plat_irq_dispatch provided in irq_cpu.c is sufficient for
dispatching interrupts on Malta in legacy and vectored interrupt modes.
Signed-off-by: default avatarAndrew Bresticker <abrestic@chromium.org>
Reviewed-by: default avatarQais Yousef <qais.yousef@imgtec.com>
Tested-by: default avatarQais Yousef <qais.yousef@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeffrey Deans <jeffrey.deans@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7821/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 3263d085
...@@ -190,92 +190,6 @@ static irqreturn_t corehi_handler(int irq, void *dev_id) ...@@ -190,92 +190,6 @@ static irqreturn_t corehi_handler(int irq, void *dev_id)
return IRQ_HANDLED; return IRQ_HANDLED;
} }
static inline int clz(unsigned long x)
{
__asm__(
" .set push \n"
" .set mips32 \n"
" clz %0, %1 \n"
" .set pop \n"
: "=r" (x)
: "r" (x));
return x;
}
/*
* Version of ffs that only looks at bits 12..15.
*/
static inline unsigned int irq_ffs(unsigned int pending)
{
#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
return -clz(pending) + 31 - CAUSEB_IP;
#else
unsigned int a0 = 7;
unsigned int t0;
t0 = pending & 0xf000;
t0 = t0 < 1;
t0 = t0 << 2;
a0 = a0 - t0;
pending = pending << t0;
t0 = pending & 0xc000;
t0 = t0 < 1;
t0 = t0 << 1;
a0 = a0 - t0;
pending = pending << t0;
t0 = pending & 0x8000;
t0 = t0 < 1;
/* t0 = t0 << 2; */
a0 = a0 - t0;
/* pending = pending << t0; */
return a0;
#endif
}
/*
* IRQs on the Malta board look basically (barring software IRQs which we
* don't use at all and all external interrupt sources are combined together
* on hardware interrupt 0 (MIPS IRQ 2)) like:
*
* MIPS IRQ Source
* -------- ------
* 0 Software (ignored)
* 1 Software (ignored)
* 2 Combined hardware interrupt (hw0)
* 3 Hardware (ignored)
* 4 Hardware (ignored)
* 5 Hardware (ignored)
* 6 Hardware (ignored)
* 7 R4k timer (what we use)
*
* We handle the IRQ according to _our_ priority which is:
*
* Highest ---- R4k Timer
* Lowest ---- Combined hardware interrupt
*
* then we just return, if multiple IRQs are pending then we will just take
* another exception, big deal.
*/
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
int irq;
if (unlikely(!pending)) {
spurious_interrupt();
return;
}
irq = irq_ffs(pending);
do_IRQ(MIPS_CPU_IRQ_BASE + irq);
}
#ifdef CONFIG_MIPS_MT_SMP #ifdef CONFIG_MIPS_MT_SMP
#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */ #define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */
...@@ -438,12 +352,6 @@ void __init arch_init_irq(void) ...@@ -438,12 +352,6 @@ void __init arch_init_irq(void)
cpu_ipi_resched_irq = MSC01E_INT_SW0; cpu_ipi_resched_irq = MSC01E_INT_SW0;
cpu_ipi_call_irq = MSC01E_INT_SW1; cpu_ipi_call_irq = MSC01E_INT_SW1;
} else { } else {
if (cpu_has_vint) {
set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ,
ipi_resched_dispatch);
set_vi_handler (MIPS_CPU_IPI_CALL_IRQ,
ipi_call_dispatch);
}
cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE +
MIPS_CPU_IPI_RESCHED_IRQ; MIPS_CPU_IPI_RESCHED_IRQ;
cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE +
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment