Commit 425c5fce authored by lvzhaoxiong's avatar lvzhaoxiong Committed by Mark Brown

ASoC: qcom: Add support for ALC5682I-VS codec

Qcom machine driver adds rt5682s support in this patch.
Card name can be specified from dts by model property, and driver makes
use of the name to distinguish which headset codec is on the board.
Signed-off-by: default avatarlvzhaoxiong <lvzhaoxiong@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20211123024329.21998-1-lvzhaoxiong@huaqin.corp-partner.google.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent fd03cf7f
......@@ -169,6 +169,7 @@ config SND_SOC_SC7180
select SND_SOC_LPASS_SC7180
select SND_SOC_MAX98357A
select SND_SOC_RT5682_I2C
select SND_SOC_RT5682S
select SND_SOC_ADAU7002
help
To add support for audio on Qualcomm Technologies Inc.
......
......@@ -17,6 +17,7 @@
#include <uapi/linux/input-event-codes.h>
#include "../codecs/rt5682.h"
#include "../codecs/rt5682s.h"
#include "common.h"
#include "lpass.h"
......@@ -128,7 +129,21 @@ static int sc7180_snd_startup(struct snd_pcm_substream *substream)
struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
int ret;
int pll_id, pll_source, pll_in, pll_out, clk_id, ret;
if (!(strcmp(card->name, "sc7180-rt5682-max98357a-1mic"))) {
pll_source = RT5682_PLL1_S_MCLK;
pll_id = 0;
clk_id = RT5682_SCLK_S_PLL1;
pll_out = RT5682_PLL1_FREQ;
pll_in = DEFAULT_MCLK_RATE;
} else if (!(strcmp(card->name, "sc7180-rt5682s-max98357a-1mic"))) {
pll_source = RT5682S_PLL_S_MCLK;
pll_id = RT5682S_PLL2;
clk_id = RT5682S_SCLK_S_PLL2;
pll_out = RT5682_PLL1_FREQ;
pll_in = DEFAULT_MCLK_RATE;
}
switch (cpu_dai->id) {
case MI2S_PRIMARY:
......@@ -145,16 +160,15 @@ static int sc7180_snd_startup(struct snd_pcm_substream *substream)
SND_SOC_DAIFMT_I2S);
/* Configure PLL1 for codec */
ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
ret = snd_soc_dai_set_pll(codec_dai, pll_id, pll_source,
pll_in, pll_out);
if (ret) {
dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
return ret;
}
/* Configure sysclk for codec */
ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
RT5682_PLL1_FREQ,
ret = snd_soc_dai_set_sysclk(codec_dai, clk_id, pll_out,
SND_SOC_CLOCK_IN);
if (ret)
dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment