Commit 4297b23d authored by John Syne's avatar John Syne Committed by Jonathan Cameron

staging:iio:ade7854: Fix error handling on read/write

The original code does not correctly handle the error related to I2C
read and write. This patch fixes the error handling related to all
read/write functions for I2C.
Signed-off-by: default avatarJohn Syne <john3909@gmail.com>
Signed-off-by: default avatarRodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Fixes: 8d97a587 ("staging: iio: meter: new driver for ADE7754 devices")
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 211d71af
......@@ -31,7 +31,7 @@ static int ade7854_i2c_write_reg_8(struct device *dev,
ret = i2c_master_send(st->i2c, st->tx, 3);
mutex_unlock(&st->buf_lock);
return ret;
return ret < 0 ? ret : 0;
}
static int ade7854_i2c_write_reg_16(struct device *dev,
......@@ -51,7 +51,7 @@ static int ade7854_i2c_write_reg_16(struct device *dev,
ret = i2c_master_send(st->i2c, st->tx, 4);
mutex_unlock(&st->buf_lock);
return ret;
return ret < 0 ? ret : 0;
}
static int ade7854_i2c_write_reg_24(struct device *dev,
......@@ -72,7 +72,7 @@ static int ade7854_i2c_write_reg_24(struct device *dev,
ret = i2c_master_send(st->i2c, st->tx, 5);
mutex_unlock(&st->buf_lock);
return ret;
return ret < 0 ? ret : 0;
}
static int ade7854_i2c_write_reg_32(struct device *dev,
......@@ -94,7 +94,7 @@ static int ade7854_i2c_write_reg_32(struct device *dev,
ret = i2c_master_send(st->i2c, st->tx, 6);
mutex_unlock(&st->buf_lock);
return ret;
return ret < 0 ? ret : 0;
}
static int ade7854_i2c_read_reg_8(struct device *dev,
......@@ -110,11 +110,11 @@ static int ade7854_i2c_read_reg_8(struct device *dev,
st->tx[1] = reg_address & 0xFF;
ret = i2c_master_send(st->i2c, st->tx, 2);
if (ret)
if (ret < 0)
goto out;
ret = i2c_master_recv(st->i2c, st->rx, 1);
if (ret)
if (ret < 0)
goto out;
*val = st->rx[0];
......@@ -136,11 +136,11 @@ static int ade7854_i2c_read_reg_16(struct device *dev,
st->tx[1] = reg_address & 0xFF;
ret = i2c_master_send(st->i2c, st->tx, 2);
if (ret)
if (ret < 0)
goto out;
ret = i2c_master_recv(st->i2c, st->rx, 2);
if (ret)
if (ret < 0)
goto out;
*val = (st->rx[0] << 8) | st->rx[1];
......@@ -162,11 +162,11 @@ static int ade7854_i2c_read_reg_24(struct device *dev,
st->tx[1] = reg_address & 0xFF;
ret = i2c_master_send(st->i2c, st->tx, 2);
if (ret)
if (ret < 0)
goto out;
ret = i2c_master_recv(st->i2c, st->rx, 3);
if (ret)
if (ret < 0)
goto out;
*val = (st->rx[0] << 16) | (st->rx[1] << 8) | st->rx[2];
......@@ -188,11 +188,11 @@ static int ade7854_i2c_read_reg_32(struct device *dev,
st->tx[1] = reg_address & 0xFF;
ret = i2c_master_send(st->i2c, st->tx, 2);
if (ret)
if (ret < 0)
goto out;
ret = i2c_master_recv(st->i2c, st->rx, 3);
if (ret)
if (ret < 0)
goto out;
*val = (st->rx[0] << 24) | (st->rx[1] << 16) |
......
......@@ -33,7 +33,7 @@ static ssize_t ade7854_read_8bit(struct device *dev,
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
ret = st->read_reg_8(dev, this_attr->address, &val);
if (ret)
if (ret < 0)
return ret;
return sprintf(buf, "%u\n", val);
......@@ -50,7 +50,7 @@ static ssize_t ade7854_read_16bit(struct device *dev,
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
ret = st->read_reg_16(dev, this_attr->address, &val);
if (ret)
if (ret < 0)
return ret;
return sprintf(buf, "%u\n", val);
......@@ -67,7 +67,7 @@ static ssize_t ade7854_read_24bit(struct device *dev,
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
ret = st->read_reg_24(dev, this_attr->address, &val);
if (ret)
if (ret < 0)
return ret;
return sprintf(buf, "%u\n", val);
......@@ -84,7 +84,7 @@ static ssize_t ade7854_read_32bit(struct device *dev,
struct ade7854_state *st = iio_priv(indio_dev);
ret = st->read_reg_32(dev, this_attr->address, &val);
if (ret)
if (ret < 0)
return ret;
return sprintf(buf, "%u\n", val);
......@@ -416,7 +416,7 @@ static int ade7854_set_irq(struct device *dev, bool enable)
u32 irqen;
ret = st->read_reg_32(dev, ADE7854_MASK0, &irqen);
if (ret)
if (ret < 0)
return ret;
if (enable)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment