Commit 42eed42b authored by Magnus Damm's avatar Magnus Damm Committed by Paul Mundt

sh: improve pinmux support for single direction pins

This patch improves the support for gpio pins that are hard wired
to either input or output and lack control register association.
A special force enum id is used to allow use without control
register but still mark the gpio pin as input or output.
Signed-off-by: default avatarMagnus Damm <damm@igel.co.jp>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 22ee3ba6
......@@ -64,6 +64,7 @@ struct pinmux_data_reg {
struct pinmux_range {
pinmux_enum_t begin;
pinmux_enum_t end;
pinmux_enum_t force;
};
struct pinmux_info {
......
......@@ -46,11 +46,10 @@ enum {
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
FORCE_IN,
PA7_IN, PA6_IN, PA5_IN, PA4_IN,
PA3_IN, PA2_IN, PA1_IN, PA0_IN,
PB11_IN, PB10_IN, PB9_IN, PB8_IN,
PB7_IN, PB6_IN, PB5_IN, PB4_IN,
PB3_IN, PB2_IN, PB1_IN, PB0_IN,
PC14_IN, PC13_IN, PC12_IN,
PC11_IN, PC10_IN, PC9_IN, PC8_IN,
PC7_IN, PC6_IN, PC5_IN, PC4_IN,
......@@ -74,7 +73,7 @@ enum {
PINMUX_INPUT_END,
PINMUX_OUTPUT_BEGIN,
PB12_OUT,
FORCE_OUT,
PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
PC14_OUT, PC13_OUT, PC12_OUT,
PC11_OUT, PC10_OUT, PC9_OUT, PC8_OUT,
......@@ -285,7 +284,7 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(PA0_DATA, PA0_IN),
/* PB */
PINMUX_DATA(PB12_DATA, PB12MD_00, PB12_OUT),
PINMUX_DATA(PB12_DATA, PB12MD_00, FORCE_OUT),
PINMUX_DATA(WDTOVF_MARK, PB12MD_01),
PINMUX_DATA(IRQOUT_MARK, PB12MD_10, PB12IRQ_00),
PINMUX_DATA(REFOUT_MARK, PB12MD_10, PB12IRQ_01),
......@@ -306,42 +305,42 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(CRX0_MARK, PB8MD_01),
PINMUX_DATA(CRX0_CRX1_MARK, PB8MD_10),
PINMUX_DATA(PB7_DATA, PB7MD_00, PB7_IN),
PINMUX_DATA(PB7_DATA, PB7MD_00, FORCE_IN),
PINMUX_DATA(SDA3_MARK, PB7MD_01),
PINMUX_DATA(PINT7_PB_MARK, PB7MD_10),
PINMUX_DATA(IRQ7_PB_MARK, PB7MD_11),
PINMUX_DATA(PB6_DATA, PB6MD_00, PB6_IN),
PINMUX_DATA(PB6_DATA, PB6MD_00, FORCE_IN),
PINMUX_DATA(SCL3_MARK, PB6MD_01),
PINMUX_DATA(PINT6_PB_MARK, PB6MD_10),
PINMUX_DATA(IRQ6_PB_MARK, PB6MD_11),
PINMUX_DATA(PB5_DATA, PB5MD_00, PB5_IN),
PINMUX_DATA(PB5_DATA, PB5MD_00, FORCE_IN),
PINMUX_DATA(SDA2_MARK, PB6MD_01),
PINMUX_DATA(PINT5_PB_MARK, PB6MD_10),
PINMUX_DATA(IRQ5_PB_MARK, PB6MD_11),
PINMUX_DATA(PB4_DATA, PB4MD_00, PB4_IN),
PINMUX_DATA(PB4_DATA, PB4MD_00, FORCE_IN),
PINMUX_DATA(SCL2_MARK, PB4MD_01),
PINMUX_DATA(PINT4_PB_MARK, PB4MD_10),
PINMUX_DATA(IRQ4_PB_MARK, PB4MD_11),
PINMUX_DATA(PB3_DATA, PB3MD_00, PB3_IN),
PINMUX_DATA(PB3_DATA, PB3MD_00, FORCE_IN),
PINMUX_DATA(SDA1_MARK, PB3MD_01),
PINMUX_DATA(PINT3_PB_MARK, PB3MD_10),
PINMUX_DATA(IRQ3_PB_MARK, PB3MD_11),
PINMUX_DATA(PB2_DATA, PB2MD_00, PB2_IN),
PINMUX_DATA(PB2_DATA, PB2MD_00, FORCE_IN),
PINMUX_DATA(SCL1_MARK, PB2MD_01),
PINMUX_DATA(PINT2_PB_MARK, PB2MD_10),
PINMUX_DATA(IRQ2_PB_MARK, PB2MD_11),
PINMUX_DATA(PB1_DATA, PB1MD_00, PB1_IN),
PINMUX_DATA(PB1_DATA, PB1MD_00, FORCE_IN),
PINMUX_DATA(SDA0_MARK, PB1MD_01),
PINMUX_DATA(PINT1_PB_MARK, PB1MD_10),
PINMUX_DATA(IRQ1_PB_MARK, PB1MD_11),
PINMUX_DATA(PB0_DATA, PB0MD_00, PB0_IN),
PINMUX_DATA(PB0_DATA, PB0MD_00, FORCE_IN),
PINMUX_DATA(SCL0_MARK, PB0MD_01),
PINMUX_DATA(PINT0_PB_MARK, PB0MD_10),
PINMUX_DATA(IRQ0_PB_MARK, PB0MD_11),
......@@ -1083,14 +1082,14 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
PB10_IN, PB10_OUT,
PB9_IN, PB9_OUT,
PB8_IN, PB8_OUT,
PB7_IN, 0,
PB6_IN, 0,
PB5_IN, 0,
PB4_IN, 0,
PB3_IN, 0,
PB2_IN, 0,
PB1_IN, 0,
PB0_IN, 0 }
0, 0,
0, 0,
0, 0,
0, 0,
0, 0,
0, 0,
0, 0,
0, 0 }
},
{ PINMUX_CFG_REG("PBCRL4", 0xfffe3890, 16, 4) {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
......@@ -1575,8 +1574,8 @@ static struct pinmux_info sh7203_pinmux_info = {
.name = "sh7203_pfc",
.reserved_id = PINMUX_RESERVED,
.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
......
......@@ -267,9 +267,13 @@ int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
break;
in_range = enum_in_range(enum_id, &gpioc->function);
if (!in_range && range)
if (!in_range && range) {
in_range = enum_in_range(enum_id, range);
if (in_range && enum_id == range->force)
continue;
}
if (!in_range)
continue;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment