Commit 43201767 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by David S. Miller

NFC: nxp-nci: Convert to use GPIO descriptor

Since we got rid of platform data, the driver may use
GPIO descriptor directly.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: default avatarSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 3b0b2783
......@@ -11,7 +11,6 @@
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/nfc.h>
......
......@@ -21,8 +21,6 @@
#include <linux/module.h>
#include <linux/nfc.h>
#include <linux/gpio/consumer.h>
#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <asm/unaligned.h>
#include <net/nfc/nfc.h>
......@@ -37,8 +35,8 @@ struct nxp_nci_i2c_phy {
struct i2c_client *i2c_dev;
struct nci_dev *ndev;
unsigned int gpio_en;
unsigned int gpio_fw;
struct gpio_desc *gpiod_en;
struct gpio_desc *gpiod_fw;
int hard_fault; /*
* < 0 if hardware error occurred (e.g. i2c err)
......@@ -51,8 +49,8 @@ static int nxp_nci_i2c_set_mode(void *phy_id,
{
struct nxp_nci_i2c_phy *phy = (struct nxp_nci_i2c_phy *) phy_id;
gpio_set_value(phy->gpio_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0);
gpio_set_value(phy->gpio_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0);
gpiod_set_value(phy->gpiod_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0);
gpiod_set_value(phy->gpiod_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0);
usleep_range(10000, 15000);
if (mode == NXP_NCI_MODE_COLD)
......@@ -252,30 +250,18 @@ static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id)
static int nxp_nci_i2c_parse_devtree(struct i2c_client *client)
{
struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client);
struct device_node *pp;
int r;
pp = client->dev.of_node;
if (!pp)
return -ENODEV;
r = of_get_named_gpio(pp, "enable-gpios", 0);
if (r == -EPROBE_DEFER)
r = of_get_named_gpio(pp, "enable-gpios", 0);
if (r < 0) {
nfc_err(&client->dev, "Failed to get EN gpio, error: %d\n", r);
return r;
phy->gpiod_en = devm_gpiod_get(&client->dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(phy->gpiod_en)) {
nfc_err(&client->dev, "Failed to get EN gpio\n");
return PTR_ERR(phy->gpiod_en);
}
phy->gpio_en = r;
r = of_get_named_gpio(pp, "firmware-gpios", 0);
if (r == -EPROBE_DEFER)
r = of_get_named_gpio(pp, "firmware-gpios", 0);
if (r < 0) {
nfc_err(&client->dev, "Failed to get FW gpio, error: %d\n", r);
return r;
phy->gpiod_fw = devm_gpiod_get(&client->dev, "firmware", GPIOD_OUT_LOW);
if (IS_ERR(phy->gpiod_fw)) {
nfc_err(&client->dev, "Failed to get FW gpio\n");
return PTR_ERR(phy->gpiod_fw);
}
phy->gpio_fw = r;
return 0;
}
......@@ -283,19 +269,15 @@ static int nxp_nci_i2c_parse_devtree(struct i2c_client *client)
static int nxp_nci_i2c_acpi_config(struct nxp_nci_i2c_phy *phy)
{
struct i2c_client *client = phy->i2c_dev;
struct gpio_desc *gpiod_en, *gpiod_fw;
gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2, GPIOD_OUT_LOW);
gpiod_fw = devm_gpiod_get_index(&client->dev, NULL, 1, GPIOD_OUT_LOW);
phy->gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2, GPIOD_OUT_LOW);
phy->gpiod_fw = devm_gpiod_get_index(&client->dev, NULL, 1, GPIOD_OUT_LOW);
if (IS_ERR(gpiod_en) || IS_ERR(gpiod_fw)) {
if (IS_ERR(phy->gpiod_en) || IS_ERR(phy->gpiod_fw)) {
nfc_err(&client->dev, "No GPIOs\n");
return -EINVAL;
}
phy->gpio_en = desc_to_gpio(gpiod_en);
phy->gpio_fw = desc_to_gpio(gpiod_fw);
return 0;
}
......@@ -331,24 +313,12 @@ static int nxp_nci_i2c_probe(struct i2c_client *client,
r = nxp_nci_i2c_acpi_config(phy);
if (r < 0)
goto probe_exit;
goto nci_probe;
} else {
nfc_err(&client->dev, "No platform data\n");
r = -EINVAL;
goto probe_exit;
}
r = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en,
GPIOF_OUT_INIT_LOW, "nxp_nci_en");
if (r < 0)
goto probe_exit;
r = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw,
GPIOF_OUT_INIT_LOW, "nxp_nci_fw");
if (r < 0)
goto probe_exit;
nci_probe:
r = nxp_nci_probe(phy, &client->dev, &i2c_phy_ops,
NXP_NCI_I2C_MAX_PAYLOAD, &phy->ndev);
if (r < 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment