Commit 43450293 authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller

net: dsa: Mop up remaining NET_DSA_HWMON references

Previous patches have moved the temperature sensor code into the
Marvell PHYs. A few now dead references to NET_DSA_HWMON were left
behind. Go reap them.
Reported-by: default avatarValentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6eacfb54
...@@ -295,7 +295,6 @@ DSA currently leverages the following subsystems: ...@@ -295,7 +295,6 @@ DSA currently leverages the following subsystems:
- MDIO/PHY library: drivers/net/phy/phy.c, mdio_bus.c - MDIO/PHY library: drivers/net/phy/phy.c, mdio_bus.c
- Switchdev: net/switchdev/* - Switchdev: net/switchdev/*
- Device Tree for various of_* functions - Device Tree for various of_* functions
- HWMON: drivers/hwmon/*
MDIO/PHY library MDIO/PHY library
---------------- ----------------
...@@ -349,12 +348,6 @@ Documentation/devicetree/bindings/net/dsa/dsa.txt. PHY/MDIO library helper ...@@ -349,12 +348,6 @@ Documentation/devicetree/bindings/net/dsa/dsa.txt. PHY/MDIO library helper
functions such as of_get_phy_mode(), of_phy_connect() are also used to query functions such as of_get_phy_mode(), of_phy_connect() are also used to query
per-port PHY specific details: interface connection, MDIO bus location etc.. per-port PHY specific details: interface connection, MDIO bus location etc..
HWMON
-----
Some switch drivers feature internal temperature sensors which are exposed as
regular HWMON devices in /sys/class/hwmon/.
Driver development Driver development
================== ==================
...@@ -495,23 +488,6 @@ Power management ...@@ -495,23 +488,6 @@ Power management
BR_STATE_DISABLED and propagating changes to the hardware if this port is BR_STATE_DISABLED and propagating changes to the hardware if this port is
disabled while being a bridge member disabled while being a bridge member
Hardware monitoring
-------------------
These callbacks are only available if CONFIG_NET_DSA_HWMON is enabled:
- get_temp: this function queries the given switch for its temperature
- get_temp_limit: this function returns the switch current maximum temperature
limit
- set_temp_limit: this function configures the maximum temperature limit allowed
- get_temp_alarm: this function returns the critical temperature threshold
returning an alarm notification
See Documentation/hwmon/sysfs-interface for details.
Bridge layer Bridge layer
------------ ------------
......
...@@ -178,14 +178,6 @@ struct dsa_switch { ...@@ -178,14 +178,6 @@ struct dsa_switch {
*/ */
s8 rtable[DSA_MAX_SWITCHES]; s8 rtable[DSA_MAX_SWITCHES];
#ifdef CONFIG_NET_DSA_HWMON
/*
* Hardware monitoring information
*/
char hwmon_name[IFNAMSIZ + 8];
struct device *hwmon_dev;
#endif
/* /*
* The lower device this switch uses to talk to the host * The lower device this switch uses to talk to the host
*/ */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment