mfd: Kontron PLD mfd driver

Add core MFD driver for the on-board PLD found on some Kontron embedded
modules. The PLD device may provide functions like watchdog, GPIO, UART
and I2C bus.

The following modules are supported:
	* COMe-bIP#
	* COMe-bPC2 (ETXexpress-PC)
	* COMe-bSC# (ETXexpress-SC T#)
	* COMe-cCT6
	* COMe-cDC2 (microETXexpress-DC)
	* COMe-cPC2 (microETXexpress-PC)
	* COMe-mCT10
	* ETX-OH

Originally-From: Michael Brunner <michael.brunner@kontron.com>
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/mfd/Kconfig

@@ -242,6 +242,27 @@ config MFD_JZ4740_ADC
 	  Say yes here if you want support for the ADC unit in the JZ4740 SoC.
 	  This driver is necessary for jz4740-battery and jz4740-hwmon driver.
 
+config MFD_KEMPLD
+	tristate "Kontron module PLD device"
+	select MFD_CORE
+	help
+	  This is the core driver for the PLD (Programmable Logic Device) found
+	  on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
+	  device may provide functions like watchdog, GPIO, UART and I2C bus.
+
+	  The following modules are supported:
+		* COMe-bIP#
+		* COMe-bPC2 (ETXexpress-PC)
+		* COMe-bSC# (ETXexpress-SC T#)
+		* COMe-cCT6
+		* COMe-cDC2 (microETXexpress-DC)
+		* COMe-cPC2 (microETXexpress-PC)
+		* COMe-mCT10
+		* ETX-OH
+
+	  This driver can also be built as a module. If so, the module
+	  will be called kempld-core.
+
 config MFD_88PM800
 	tristate "Marvell 88PM800"
 	depends on I2C=y && GENERIC_HARDIRQS

drivers/mfd/Makefile

@@ -129,6 +129,7 @@ obj-$(CONFIG_MFD_DB8500_PRCMU)	+= db8500-prcmu.o
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
 obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
 obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
+obj-$(CONFIG_MFD_KEMPLD)	+= kempld-core.o
 obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
 obj-$(CONFIG_LPC_ICH)		+= lpc_ich.o
 obj-$(CONFIG_MFD_RDC321X)	+= rdc321x-southbridge.o

include/linux/mfd/kempld.h

+/*
+ * Kontron PLD driver definitions
+ *
+ * Copyright (c) 2010-2012 Kontron Europe GmbH
+ * Author: Michael Brunner <michael.brunner@kontron.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_MFD_KEMPLD_H_
+#define _LINUX_MFD_KEMPLD_H_
+
+/* kempld register definitions */
+#define KEMPLD_IOINDEX			0xa80
+#define KEMPLD_IODATA			0xa81
+#define KEMPLD_MUTEX_KEY		0x80
+#define KEMPLD_VERSION			0x00
+#define KEMPLD_VERSION_LSB		0x00
+#define KEMPLD_VERSION_MSB		0x01
+#define KEMPLD_VERSION_GET_MINOR(x)	(x & 0x1f)
+#define KEMPLD_VERSION_GET_MAJOR(x)	((x >> 5) & 0x1f)
+#define KEMPLD_VERSION_GET_NUMBER(x)	((x >> 10) & 0xf)
+#define KEMPLD_VERSION_GET_TYPE(x)	((x >> 14) & 0x3)
+#define KEMPLD_BUILDNR			0x02
+#define KEMPLD_BUILDNR_LSB		0x02
+#define KEMPLD_BUILDNR_MSB		0x03
+#define KEMPLD_FEATURE			0x04
+#define KEMPLD_FEATURE_LSB		0x04
+#define KEMPLD_FEATURE_MSB		0x05
+#define KEMPLD_FEATURE_BIT_I2C		(1 << 0)
+#define KEMPLD_FEATURE_BIT_WATCHDOG	(1 << 1)
+#define KEMPLD_FEATURE_BIT_GPIO		(1 << 2)
+#define KEMPLD_FEATURE_MASK_UART	(7 << 3)
+#define KEMPLD_FEATURE_BIT_NMI		(1 << 8)
+#define KEMPLD_FEATURE_BIT_SMI		(1 << 9)
+#define KEMPLD_FEATURE_BIT_SCI		(1 << 10)
+#define KEMPLD_SPEC			0x06
+#define KEMPLD_SPEC_GET_MINOR(x)	(x & 0x0f)
+#define KEMPLD_SPEC_GET_MAJOR(x)	((x >> 4) & 0x0f)
+#define KEMPLD_IRQ_GPIO			0x35
+#define KEMPLD_IRQ_I2C			0x36
+#define KEMPLD_CFG			0x37
+#define KEMPLD_CFG_GPIO_I2C_MUX		(1 << 0)
+#define KEMPLD_CFG_BIOS_WP		(1 << 7)
+
+#define KEMPLD_CLK			33333333
+
+#define	KEMPLD_TYPE_RELEASE		0x0
+#define	KEMPLD_TYPE_DEBUG		0x1
+#define	KEMPLD_TYPE_CUSTOM		0x2
+
+/**
+ * struct kempld_info - PLD device information structure
+ * @major:	PLD major revision
+ * @minor:	PLD minor revision
+ * @buildnr:	PLD build number
+ * @number:	PLD board specific index
+ * @type:	PLD type
+ * @spec_major:	PLD FW specification major revision
+ * @spec_minor:	PLD FW specification minor revision
+ */
+struct kempld_info {
+	unsigned int major;
+	unsigned int minor;
+	unsigned int buildnr;
+	unsigned int number;
+	unsigned int type;
+	unsigned int spec_major;
+	unsigned int spec_minor;
+};
+
+/**
+ * struct kempld_device_data - Internal representation of the PLD device
+ * @io_base:		Pointer to the IO memory
+ * @io_index:		Pointer to the IO index register
+ * @io_data:		Pointer to the IO data register
+ * @pld_clock:		PLD clock frequency
+ * @feature_mask:	PLD feature mask
+ * @dev:		Pointer to kernel device structure
+ * @info:		KEMPLD info structure
+ * @lock:		PLD mutex
+ */
+struct kempld_device_data {
+	void __iomem		*io_base;
+	void __iomem		*io_index;
+	void __iomem		*io_data;
+	u32			pld_clock;
+	u32			feature_mask;
+	struct device		*dev;
+	struct kempld_info	info;
+	struct mutex		lock;
+};
+
+/**
+ * struct kempld_platform_data - PLD hardware configuration structure
+ * @pld_clock:			PLD clock frequency
+ * @gpio_base			GPIO base pin number
+ * @ioresource:			IO addresses of the PLD
+ * @get_mutex:			PLD specific get_mutex callback
+ * @release_mutex:		PLD specific release_mutex callback
+ * @get_info:			PLD specific get_info callback
+ * @register_cells:		PLD specific register_cells callback
+ */
+struct kempld_platform_data {
+	u32				pld_clock;
+	int				gpio_base;
+	struct resource			*ioresource;
+	void (*get_hardware_mutex)	(struct kempld_device_data *);
+	void (*release_hardware_mutex)	(struct kempld_device_data *);
+	int (*get_info)			(struct kempld_device_data *);
+	int (*register_cells)		(struct kempld_device_data *);
+};
+
+extern void kempld_get_mutex(struct kempld_device_data *pld);
+extern void kempld_release_mutex(struct kempld_device_data *pld);
+extern u8 kempld_read8(struct kempld_device_data *pld, u8 index);
+extern void kempld_write8(struct kempld_device_data *pld, u8 index, u8 data);
+extern u16 kempld_read16(struct kempld_device_data *pld, u8 index);
+extern void kempld_write16(struct kempld_device_data *pld, u8 index, u16 data);
+extern u32 kempld_read32(struct kempld_device_data *pld, u8 index);
+extern void kempld_write32(struct kempld_device_data *pld, u8 index, u32 data);
+
+#endif /* _LINUX_MFD_KEMPLD_H_ */