Skip to content

L
linux
Commit 43769f10 authored by Ingo Molnar's avatar Ingo Molnar
Browse files
Options

Merge branches 'tracing/ftrace' and 'linus' into tracing/core

parents ae7462b4 eda58a85
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 2516 additions and 1843 deletions
Documentation/filesystems/ubifs.txt
View file @ 43769f10
......@@ -79,13 +79,6 @@ Mount options
(*) == default.
norm_unmount (*) commit on unmount; the journal is committed
when the file-system is unmounted so that the
next mount does not have to replay the journal
and it becomes very fast;
fast_unmount do not commit on unmount; this option makes
unmount faster, but the next mount slower
because of the need to replay the journal.
bulk_read read more in one go to take advantage of flash
media that read faster sequentially
no_bulk_read (*) do not bulk-read
......
MAINTAINERS
View file @ 43769f10
......@@ -911,7 +911,7 @@ S: Maintained
BLACKFIN ARCHITECTURE
P: Bryan Wu
M: cooloney@kernel.org
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
......
arch/arm/kernel/entry-armv.S
View file @ 43769f10
......@@ -650,6 +650,7 @@ ENTRY(fp_enter)
no_fp: mov pc, lr
__und_usr_unknown:
enable_irq
mov r0, sp
adr lr, ret_from_exception
b do_undefinstr
......
arch/arm/kernel/entry-common.S
View file @ 43769f10
......@@ -136,7 +136,7 @@ ENTRY(mcount)
ldmia sp!, {r0-r3, pc}
trace:
ldr r1, [fp, #-4]
ldr r1, [fp, #-4] @ lr of instrumented routine
mov r0, lr
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
......
arch/arm/kernel/irq.c
View file @ 43769f10
......@@ -101,7 +101,7 @@ int show_interrupts(struct seq_file *p, void *v)
/* Handle bad interrupts */
static struct irq_desc bad_irq_desc = {
.handle_irq = handle_bad_irq,
.lock = SPIN_LOCK_UNLOCKED
.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
};
/*
......
arch/arm/mach-msm/board-halibut.c
View file @ 43769f10
......@@ -27,6 +27,7 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/irqs.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
......
arch/arm/mach-omap1/devices.c
View file @ 43769f10
......@@ -181,7 +181,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
}
size = OMAP1_MMC_SIZE;
omap_mmc_add(i, base, size, irq, mmc_data[i]);
omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
};
}
......
arch/arm/mach-omap1/mcbsp.c
View file @ 43769f10
......@@ -28,81 +28,8 @@
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
struct mcbsp_internal_clk {
struct clk clk;
struct clk **childs;
int n_childs;
};
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
{
const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
int i;
mclk->n_childs = ARRAY_SIZE(clk_names);
mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
GFP_KERNEL);
for (i = 0; i < mclk->n_childs; i++) {
/* We fake a platform device to get correct device id */
struct platform_device pdev;
pdev.dev.bus = &platform_bus_type;
pdev.id = mclk->clk.id;
mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
if (IS_ERR(mclk->childs[i]))
printk(KERN_ERR "Could not get clock %s (%d).\n",
clk_names[i], mclk->clk.id);
}
}
static int omap_mcbsp_clk_enable(struct clk *clk)
{
struct mcbsp_internal_clk *mclk = container_of(clk,
struct mcbsp_internal_clk, clk);
int i;
for (i = 0; i < mclk->n_childs; i++)
clk_enable(mclk->childs[i]);
return 0;
}
static void omap_mcbsp_clk_disable(struct clk *clk)
{
struct mcbsp_internal_clk *mclk = container_of(clk,
struct mcbsp_internal_clk, clk);
int i;
for (i = 0; i < mclk->n_childs; i++)
clk_disable(mclk->childs[i]);
}
static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
{
.clk = {
.name = "mcbsp_clk",
.id = 1,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
{
.clk = {
.name = "mcbsp_clk",
.id = 3,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
};
#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks)
#else
#define omap_mcbsp_clks_size 0
static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
{ }
const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
#endif
static void omap1_mcbsp_request(unsigned int id)
......@@ -167,8 +94,9 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
.rx_irq = INT_McBSP1RX,
.tx_irq = INT_McBSP1TX,
.ops = &omap1_mcbsp_ops,
.clk_name = "mcbsp_clk",
},
.clk_names = clk_names,
.num_clks = 3,
},
{
.phys_base = OMAP1510_MCBSP2_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
......@@ -184,7 +112,8 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
.rx_irq = INT_McBSP3RX,
.tx_irq = INT_McBSP3TX,
.ops = &omap1_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 3,
},
};
#define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata)
......@@ -202,7 +131,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
.rx_irq = INT_McBSP1RX,
.tx_irq = INT_McBSP1TX,
.ops = &omap1_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 3,
},
{
.phys_base = OMAP1610_MCBSP2_BASE,
......@@ -219,7 +149,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
.rx_irq = INT_McBSP3RX,
.tx_irq = INT_McBSP3TX,
.ops = &omap1_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 3,
},
};
#define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata)
......@@ -230,15 +161,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
int __init omap1_mcbsp_init(void)
{
int i;
for (i = 0; i < omap_mcbsp_clks_size; i++) {
if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
clk_register(&omap_mcbsp_clks[i].clk);
}
}
if (cpu_is_omap730())
omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
if (cpu_is_omap15xx())
......
arch/arm/mach-omap2/devices.c
View file @ 43769f10
......@@ -421,6 +421,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
{
int i;
char *name;
for (i = 0; i < nr_controllers; i++) {
unsigned long base, size;
......@@ -450,12 +451,14 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
continue;
}
if (cpu_is_omap2420())
if (cpu_is_omap2420()) {
size = OMAP2420_MMC_SIZE;
else
name = "mmci-omap";
} else {
size = HSMMC_SIZE;
omap_mmc_add(i, base, size, irq, mmc_data[i]);
name = "mmci-omap-hs";
}
omap_mmc_add(name, i, base, size, irq, mmc_data[i]);
};
}
......
arch/arm/mach-omap2/id.c
View file @ 43769f10
......@@ -172,9 +172,13 @@ void __init omap34xx_check_revision(void)
omap_revision = OMAP3430_REV_ES3_0;
rev_name = "ES3.0";
break;
case 4:
omap_revision = OMAP3430_REV_ES3_1;
rev_name = "ES3.1";
break;
default:
/* Use the latest known revision as default */
omap_revision = OMAP3430_REV_ES3_0;
omap_revision = OMAP3430_REV_ES3_1;
rev_name = "Unknown revision\n";
}
}
......
arch/arm/mach-omap2/irq.c
View file @ 43769f10
......@@ -134,6 +134,7 @@ static struct irq_chip omap_irq_chip = {
.ack = omap_mask_ack_irq,
.mask = omap_mask_irq,
.unmask = omap_unmask_irq,
.disable = omap_mask_irq,
};
static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
......
arch/arm/mach-omap2/mcbsp.c
View file @ 43769f10
......@@ -24,106 +24,7 @@
#include <mach/cpu.h>
#include <mach/mcbsp.h>
struct mcbsp_internal_clk {
struct clk clk;
struct clk **childs;
int n_childs;
};
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
{
const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
int i;
mclk->n_childs = ARRAY_SIZE(clk_names);
mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
GFP_KERNEL);
for (i = 0; i < mclk->n_childs; i++) {
/* We fake a platform device to get correct device id */
struct platform_device pdev;
pdev.dev.bus = &platform_bus_type;
pdev.id = mclk->clk.id;
mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
if (IS_ERR(mclk->childs[i]))
printk(KERN_ERR "Could not get clock %s (%d).\n",
clk_names[i], mclk->clk.id);
}
}
static int omap_mcbsp_clk_enable(struct clk *clk)
{
struct mcbsp_internal_clk *mclk = container_of(clk,
struct mcbsp_internal_clk, clk);
int i;
for (i = 0; i < mclk->n_childs; i++)
clk_enable(mclk->childs[i]);
return 0;
}
static void omap_mcbsp_clk_disable(struct clk *clk)
{
struct mcbsp_internal_clk *mclk = container_of(clk,
struct mcbsp_internal_clk, clk);
int i;
for (i = 0; i < mclk->n_childs; i++)
clk_disable(mclk->childs[i]);
}
static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
{
.clk = {
.name = "mcbsp_clk",
.id = 1,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
{
.clk = {
.name = "mcbsp_clk",
.id = 2,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
{
.clk = {
.name = "mcbsp_clk",
.id = 3,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
{
.clk = {
.name = "mcbsp_clk",
.id = 4,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
{
.clk = {
.name = "mcbsp_clk",
.id = 5,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
};
#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks)
#else
#define omap_mcbsp_clks_size 0
static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
static inline void omap_mcbsp_clk_init(struct clk *clk)
{ }
#endif
const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
static void omap2_mcbsp2_mux_setup(void)
{
......@@ -156,7 +57,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
......@@ -165,7 +67,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
};
#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
......@@ -183,7 +86,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
......@@ -192,7 +96,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP3_BASE,
......@@ -201,7 +106,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP4_BASE,
......@@ -210,7 +116,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP5_BASE,
......@@ -219,7 +126,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
};
#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
......@@ -237,7 +145,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP2_BASE,
......@@ -246,7 +155,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP3_BASE,
......@@ -255,7 +165,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP4_BASE,
......@@ -264,7 +175,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP5_BASE,
......@@ -273,7 +185,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
};
#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata)
......@@ -284,14 +197,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
static int __init omap2_mcbsp_init(void)
{
int i;
for (i = 0; i < omap_mcbsp_clks_size; i++) {
/* Once we call clk_get inside init, we do not register it */
omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
clk_register(&omap_mcbsp_clks[i].clk);
}
if (cpu_is_omap2420())
omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
if (cpu_is_omap2430())
......
arch/arm/mach-omap2/sleep24xx.S
View file @ 43769f10
......@@ -93,9 +93,8 @@ ENTRY(omap24xx_cpu_suspend)
orr r4, r4, #0x40 @ enable self refresh on idle req
mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
str r4, [r2] @ make it so
mov r2, #0
nop
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
mcr p15, 0, r3, c7, c0, 4 @ wait for interrupt
nop
loop:
subs r5, r5, #0x1 @ awake, wait just a bit
......
arch/arm/mach-omap2/timer-gp.c
View file @ 43769f10
......@@ -118,7 +118,8 @@ static void __init omap2_gp_clockevent_init(void)
clockevent_gpt.max_delta_ns =
clockevent_delta2ns(0xffffffff, &clockevent_gpt);
clockevent_gpt.min_delta_ns =
clockevent_delta2ns(1, &clockevent_gpt);
clockevent_delta2ns(3, &clockevent_gpt);
/* Timer internal resynch latency. */
clockevent_gpt.cpumask = cpumask_of(0);
clockevents_register_device(&clockevent_gpt);
......
arch/arm/mach-sa1100/generic.c
View file @ 43769f10
......@@ -289,7 +289,7 @@ static struct platform_device sa11x0pcmcia_device = {
};
static struct platform_device sa11x0mtd_device = {
.name = "flash",
.name = "sa1100-mtd",
.id = -1,
};
......
arch/arm/mm/fault-armv.c
View file @ 43769f10
......@@ -66,7 +66,10 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
* fault (ie, is old), we can safely ignore any issues.
*/
if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
flush_cache_page(vma, address, pte_pfn(entry));
unsigned long pfn = pte_pfn(entry);
flush_cache_page(vma, address, pfn);
outer_flush_range((pfn << PAGE_SHIFT),
(pfn << PAGE_SHIFT) + PAGE_SIZE);
pte_val(entry) &= ~L_PTE_MT_MASK;
pte_val(entry) |= shared_pte_mask;
set_pte_at(vma->vm_mm, address, pte, entry);
......
arch/arm/plat-omap/devices.c
View file @ 43769f10
......@@ -200,14 +200,15 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
/*
* Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
*/
int __init omap_mmc_add(int id, unsigned long base, unsigned long size,
unsigned int irq, struct omap_mmc_platform_data *data)
int __init omap_mmc_add(const char *name, int id, unsigned long base,
unsigned long size, unsigned int irq,
struct omap_mmc_platform_data *data)
{
struct platform_device *pdev;
struct resource res[OMAP_MMC_NR_RES];
int ret;
pdev = platform_device_alloc("mmci-omap", id);
pdev = platform_device_alloc(name, id);
if (!pdev)
return -ENOMEM;
......
arch/arm/plat-omap/dma.c
View file @ 43769f10
......@@ -709,6 +709,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->dev_name = dev_name;
chan->callback = callback;
chan->data = data;
chan->flags = 0;
#ifndef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap2()) {
......@@ -1888,11 +1889,11 @@ static int omap2_dma_handle_ch(int ch)
status = dma_read(CSR(ch));
}
dma_write(status, CSR(ch));
if (likely(dma_chan[ch].callback != NULL))
dma_chan[ch].callback(ch, status, dma_chan[ch].data);
dma_write(status, CSR(ch));
return 0;
}
......
arch/arm/plat-omap/include/mach/cpu.h
View file @ 43769f10
......@@ -339,6 +339,7 @@ IS_OMAP_TYPE(3430, 0x3430)
#define OMAP3430_REV_ES2_0 0x34301034
#define OMAP3430_REV_ES2_1 0x34302034
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
/*
* omap_chip bits
......
arch/arm/plat-omap/include/mach/mcbsp.h
View file @ 43769f10
......@@ -344,7 +344,8 @@ struct omap_mcbsp_platform_data {
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
char const *clk_name;
char const **clk_names;
int num_clks;
};
struct omap_mcbsp {
......@@ -376,7 +377,8 @@ struct omap_mcbsp {
/* Protect the field .free, while checking if the mcbsp is in use */
spinlock_t lock;
struct omap_mcbsp_platform_data *pdata;
struct clk *clk;
struct clk **clks;
int num_clks;
};
extern struct omap_mcbsp **mcbsp_ptr;
extern int omap_mcbsp_count;
......
arch/arm/plat-omap/include/mach/mmc.h
View file @ 43769f10
......@@ -115,8 +115,9 @@ void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
int omap_mmc_add(int id, unsigned long base, unsigned long size,
unsigned int irq, struct omap_mmc_platform_data *data);
int omap_mmc_add(const char *name, int id, unsigned long base,
unsigned long size, unsigned int irq,
struct omap_mmc_platform_data *data);
#else
static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
......@@ -126,8 +127,9 @@ static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
{
}
static inline int omap_mmc_add(int id, unsigned long base, unsigned long size,
unsigned int irq, struct omap_mmc_platform_data *data)
static inline int omap_mmc_add(const char *name, int id, unsigned long base,
unsigned long size, unsigned int irq,
struct omap_mmc_platform_data *data)
{
return 0;
}
......
arch/arm/plat-omap/mcbsp.c
View file @ 43769f10
......@@ -214,6 +214,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type);
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
int i;
int err;
if (!omap_mcbsp_check_valid_id(id)) {
......@@ -225,7 +226,8 @@ int omap_mcbsp_request(unsigned int id)
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
mcbsp->pdata->ops->request(id);
clk_enable(mcbsp->clk);
for (i = 0; i < mcbsp->num_clks; i++)
clk_enable(mcbsp->clks[i]);
spin_lock(&mcbsp->lock);
if (!mcbsp->free) {
......@@ -276,6 +278,7 @@ EXPORT_SYMBOL(omap_mcbsp_request);
void omap_mcbsp_free(unsigned int id)
{
struct omap_mcbsp *mcbsp;
int i;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
......@@ -286,7 +289,8 @@ void omap_mcbsp_free(unsigned int id)
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
clk_disable(mcbsp->clk);
for (i = mcbsp->num_clks - 1; i >= 0; i--)
clk_disable(mcbsp->clks[i]);
spin_lock(&mcbsp->lock);
if (mcbsp->free) {
......@@ -872,6 +876,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
struct omap_mcbsp *mcbsp;
int id = pdev->id - 1;
int i;
int ret = 0;
if (!pdata) {
......@@ -916,14 +921,25 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
mcbsp->dma_rx_sync = pdata->dma_rx_sync;
mcbsp->dma_tx_sync = pdata->dma_tx_sync;
if (pdata->clk_name)
mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name);
if (IS_ERR(mcbsp->clk)) {
dev_err(&pdev->dev,
"Invalid clock configuration for McBSP%d.\n",
mcbsp->id);
ret = PTR_ERR(mcbsp->clk);
goto err_clk;
if (pdata->num_clks) {
mcbsp->num_clks = pdata->num_clks;
mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *),
GFP_KERNEL);
if (!mcbsp->clks) {
ret = -ENOMEM;
goto exit;
}
for (i = 0; i < mcbsp->num_clks; i++) {
mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]);
if (IS_ERR(mcbsp->clks[i])) {
dev_err(&pdev->dev,
"Invalid %s configuration for McBSP%d.\n",
pdata->clk_names[i], mcbsp->id);
ret = PTR_ERR(mcbsp->clks[i]);
goto err_clk;
}
}
}
mcbsp->pdata = pdata;
......@@ -932,6 +948,9 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
return 0;
err_clk:
while (i--)
clk_put(mcbsp->clks[i]);
kfree(mcbsp->clks);
iounmap(mcbsp->io_base);
err_ioremap:
mcbsp->free = 0;
......@@ -942,6 +961,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
{
struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
int i;
platform_set_drvdata(pdev, NULL);
if (mcbsp) {
......@@ -950,12 +970,18 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
clk_disable(mcbsp->clk);
clk_put(mcbsp->clk);
for (i = mcbsp->num_clks - 1; i >= 0; i--) {
clk_disable(mcbsp->clks[i]);
clk_put(mcbsp->clks[i]);
}
iounmap(mcbsp->io_base);
mcbsp->clk = NULL;
if (mcbsp->num_clks) {
kfree(mcbsp->clks);
mcbsp->clks = NULL;
mcbsp->num_clks = 0;
}
mcbsp->free = 0;
mcbsp->dev = NULL;
}
......
arch/blackfin/Kconfig
View file @ 43769f10
......@@ -169,26 +169,51 @@ config BF542
help
BF542 Processor Support.
config BF542M
bool "BF542m"
help
BF542 Processor Support.
config BF544
bool "BF544"
help
BF544 Processor Support.
config BF544M
bool "BF544m"
help
BF544 Processor Support.
config BF547
bool "BF547"
help
BF547 Processor Support.
config BF547M
bool "BF547m"
help
BF547 Processor Support.
config BF548
bool "BF548"
help
BF548 Processor Support.
config BF548M
bool "BF548m"
help
BF548 Processor Support.
config BF549
bool "BF549"
help
BF549 Processor Support.
config BF549M
bool "BF549m"
help
BF549 Processor Support.
config BF561
bool "BF561"
help
......@@ -224,39 +249,39 @@ config TICK_SOURCE_SYSTMR0
config BF_REV_MIN
int
default 0 if (BF51x || BF52x || BF54x)
default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
default 2 if (BF537 || BF536 || BF534)
default 3 if (BF561 ||BF533 || BF532 || BF531)
default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
default 4 if (BF538 || BF539)
config BF_REV_MAX
int
default 2 if (BF51x || BF52x || BF54x)
default 3 if (BF537 || BF536 || BF534)
default 2 if (BF51x || BF52x || (BF54x && !BF54xM))
default 3 if (BF537 || BF536 || BF534 || BF54xM)
default 5 if (BF561 || BF538 || BF539)
default 6 if (BF533 || BF532 || BF531)
choice
prompt "Silicon Rev"
default BF_REV_0_1 if (BF51x || BF52x || BF54x)
default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM))
default BF_REV_0_2 if (BF534 || BF536 || BF537)
default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
config BF_REV_0_0
bool "0.0"
depends on (BF51x || BF52x || BF54x)
depends on (BF51x || BF52x || (BF54x && !BF54xM))
config BF_REV_0_1
bool "0.1"
depends on (BF52x || BF54x)
depends on (BF52x || (BF54x && !BF54xM))
config BF_REV_0_2
bool "0.2"
depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
config BF_REV_0_3
bool "0.3"
depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
config BF_REV_0_4
bool "0.4"
......@@ -293,9 +318,14 @@ config BF53x
depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
default y
config BF54xM
bool
depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
default y
config BF54x
bool
depends on (BF542 || BF544 || BF547 || BF548 || BF549)
depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
default y
config MEM_GENERIC_BOARD
......
arch/blackfin/Makefile
View file @ 43769f10
......@@ -21,57 +21,67 @@ KALLSYMS += --symbol-prefix=_
KBUILD_DEFCONFIG := BF537-STAMP_defconfig
# setup the machine name and the machine dependent settings
machine-$(CONFIG_BF512) := bf518
machine-$(CONFIG_BF514) := bf518
machine-$(CONFIG_BF516) := bf518
machine-$(CONFIG_BF518) := bf518
machine-$(CONFIG_BF522) := bf527
machine-$(CONFIG_BF523) := bf527
machine-$(CONFIG_BF524) := bf527
machine-$(CONFIG_BF525) := bf527
machine-$(CONFIG_BF526) := bf527
machine-$(CONFIG_BF527) := bf527
machine-$(CONFIG_BF531) := bf533
machine-$(CONFIG_BF532) := bf533
machine-$(CONFIG_BF533) := bf533
machine-$(CONFIG_BF534) := bf537
machine-$(CONFIG_BF536) := bf537
machine-$(CONFIG_BF537) := bf537
machine-$(CONFIG_BF538) := bf538
machine-$(CONFIG_BF539) := bf538
machine-$(CONFIG_BF542) := bf548
machine-$(CONFIG_BF544) := bf548
machine-$(CONFIG_BF547) := bf548
machine-$(CONFIG_BF548) := bf548
machine-$(CONFIG_BF549) := bf548
machine-$(CONFIG_BF561) := bf561
machine-$(CONFIG_BF512) := bf518
machine-$(CONFIG_BF514) := bf518
machine-$(CONFIG_BF516) := bf518
machine-$(CONFIG_BF518) := bf518
machine-$(CONFIG_BF522) := bf527
machine-$(CONFIG_BF523) := bf527
machine-$(CONFIG_BF524) := bf527
machine-$(CONFIG_BF525) := bf527
machine-$(CONFIG_BF526) := bf527
machine-$(CONFIG_BF527) := bf527
machine-$(CONFIG_BF531) := bf533
machine-$(CONFIG_BF532) := bf533
machine-$(CONFIG_BF533) := bf533
machine-$(CONFIG_BF534) := bf537
machine-$(CONFIG_BF536) := bf537
machine-$(CONFIG_BF537) := bf537
machine-$(CONFIG_BF538) := bf538
machine-$(CONFIG_BF539) := bf538
machine-$(CONFIG_BF542) := bf548
machine-$(CONFIG_BF542M) := bf548
machine-$(CONFIG_BF544) := bf548
machine-$(CONFIG_BF544M) := bf548
machine-$(CONFIG_BF547) := bf548
machine-$(CONFIG_BF547M) := bf548
machine-$(CONFIG_BF548) := bf548
machine-$(CONFIG_BF548M) := bf548
machine-$(CONFIG_BF549) := bf548
machine-$(CONFIG_BF549M) := bf548
machine-$(CONFIG_BF561) := bf561
MACHINE := $(machine-y)
export MACHINE
cpu-$(CONFIG_BF512) := bf512
cpu-$(CONFIG_BF514) := bf514
cpu-$(CONFIG_BF516) := bf516
cpu-$(CONFIG_BF518) := bf518
cpu-$(CONFIG_BF522) := bf522
cpu-$(CONFIG_BF523) := bf523
cpu-$(CONFIG_BF524) := bf524
cpu-$(CONFIG_BF525) := bf525
cpu-$(CONFIG_BF526) := bf526
cpu-$(CONFIG_BF527) := bf527
cpu-$(CONFIG_BF531) := bf531
cpu-$(CONFIG_BF532) := bf532
cpu-$(CONFIG_BF533) := bf533
cpu-$(CONFIG_BF534) := bf534
cpu-$(CONFIG_BF536) := bf536
cpu-$(CONFIG_BF537) := bf537
cpu-$(CONFIG_BF538) := bf538
cpu-$(CONFIG_BF539) := bf539
cpu-$(CONFIG_BF542) := bf542
cpu-$(CONFIG_BF544) := bf544
cpu-$(CONFIG_BF547) := bf547
cpu-$(CONFIG_BF548) := bf548
cpu-$(CONFIG_BF549) := bf549
cpu-$(CONFIG_BF561) := bf561
cpu-$(CONFIG_BF512) := bf512
cpu-$(CONFIG_BF514) := bf514
cpu-$(CONFIG_BF516) := bf516
cpu-$(CONFIG_BF518) := bf518
cpu-$(CONFIG_BF522) := bf522
cpu-$(CONFIG_BF523) := bf523
cpu-$(CONFIG_BF524) := bf524
cpu-$(CONFIG_BF525) := bf525
cpu-$(CONFIG_BF526) := bf526
cpu-$(CONFIG_BF527) := bf527
cpu-$(CONFIG_BF531) := bf531
cpu-$(CONFIG_BF532) := bf532
cpu-$(CONFIG_BF533) := bf533
cpu-$(CONFIG_BF534) := bf534
cpu-$(CONFIG_BF536) := bf536
cpu-$(CONFIG_BF537) := bf537
cpu-$(CONFIG_BF538) := bf538
cpu-$(CONFIG_BF539) := bf539
cpu-$(CONFIG_BF542) := bf542
cpu-$(CONFIG_BF542M) := bf542m
cpu-$(CONFIG_BF544) := bf544
cpu-$(CONFIG_BF544M) := bf544m
cpu-$(CONFIG_BF547) := bf547
cpu-$(CONFIG_BF547M) := bf547m
cpu-$(CONFIG_BF548) := bf548
cpu-$(CONFIG_BF548M) := bf548m
cpu-$(CONFIG_BF549) := bf549
cpu-$(CONFIG_BF549M) := bf549m
cpu-$(CONFIG_BF561) := bf561
rev-$(CONFIG_BF_REV_0_0) := 0.0
rev-$(CONFIG_BF_REV_0_1) := 0.1
......
arch/blackfin/configs/BF518F-EZBRD_defconfig
View file @ 43769f10
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Fri Jan 9 17:58:41 2009
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -149,6 +150,7 @@ CONFIG_BF_REV_0_0=y
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF51x=y
CONFIG_MEM_MT48LC32M8A2_75=y
CONFIG_BFIN518F_EZBRD=y
#
......@@ -598,7 +600,10 @@ CONFIG_PHYLIB=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_BFIN_MAC is not set
CONFIG_BFIN_MAC=y
CONFIG_BFIN_TX_DESC_NUM=10
CONFIG_BFIN_RX_DESC_NUM=20
# CONFIG_BFIN_MAC_RMII is not set
# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
......@@ -679,7 +684,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
......
arch/blackfin/configs/BF526-EZBRD_defconfig
View file @ 43769f10
......@@ -723,7 +723,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
......
arch/blackfin/configs/BF527-EZKIT_defconfig
View file @ 43769f10
......@@ -767,7 +767,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
......
arch/blackfin/configs/BF533-EZKIT_defconfig
View file @ 43769f10
......@@ -672,7 +672,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
......
arch/blackfin/configs/BF533-STAMP_defconfig
View file @ 43769f10
......@@ -679,7 +679,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
......
arch/blackfin/configs/BF537-STAMP_defconfig
View file @ 43769f10
......@@ -722,7 +722,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
......
arch/blackfin/configs/BF538-EZKIT_defconfig
View file @ 43769f10
......@@ -726,7 +726,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
......
arch/blackfin/configs/BF548-EZKIT_defconfig
View file @ 43769f10
......@@ -856,7 +856,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
......
arch/blackfin/configs/BF561-EZKIT_defconfig
View file @ 43769f10
......@@ -709,7 +709,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
......
arch/blackfin/configs/CM-BF527_defconfig
View file @ 43769f10
This diff is collapsed.
arch/blackfin/include/asm/checksum.h
View file @ 43769f10
......@@ -63,23 +63,23 @@ static inline __wsum
csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
__asm__ ("%0 = %0 + %1;\n\t"
"CC = AC0;\n\t"
"if !CC jump 4;\n\t"
"%0 = %0 + %4;\n\t"
"%0 = %0 + %2;\n\t"
"CC = AC0;\n\t"
"if !CC jump 4;\n\t"
"%0 = %0 + %4;\n\t"
"%0 = %0 + %3;\n\t"
"CC = AC0;\n\t"
"if !CC jump 4;\n\t"
"%0 = %0 + %4;\n\t"
"NOP;\n\t"
: "=d" (sum)
: "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum)
: "CC");
unsigned int carry;
__asm__ ("%0 = %0 + %2;\n\t"
"CC = AC0;\n\t"
"%1 = CC;\n\t"
"%0 = %0 + %1;\n\t"
"%0 = %0 + %3;\n\t"
"CC = AC0;\n\t"
"%1 = CC;\n\t"
"%0 = %0 + %1;\n\t"
"%0 = %0 + %4;\n\t"
"CC = AC0;\n\t"
"%1 = CC;\n\t"
"%0 = %0 + %1;\n\t"
: "=d" (sum), "=&d" (carry)
: "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum)
: "CC");
return (sum);
}
......
arch/blackfin/include/asm/delay.h
View file @ 43769f10
......@@ -13,29 +13,7 @@
static inline void __delay(unsigned long loops)
{
if (ANOMALY_05000312) {
/* Interrupted loads to loop registers -> bad */
unsigned long tmp;
__asm__ __volatile__(
"[--SP] = LC0;"
"[--SP] = LT0;"
"[--SP] = LB0;"
"LSETUP (1f,1f) LC0 = %1;"
"1: NOP;"
/* We take advantage of the fact that LC0 is 0 at
* the end of the loop. Otherwise we'd need some
* NOPs after the CLI here.
*/
"CLI %0;"
"LB0 = [SP++];"
"LT0 = [SP++];"
"LC0 = [SP++];"
"STI %0;"
: "=d" (tmp)
: "a" (loops)
);
} else
__asm__ __volatile__ (
__asm__ __volatile__ (
"LSETUP(1f, 1f) LC0 = %0;"
"1: NOP;"
:
......@@ -47,16 +25,15 @@ static inline void __delay(unsigned long loops)
#include <linux/param.h> /* needed for HZ */
/*
* Use only for very small delays ( < 1 msec). Should probably use a
* lookup table, really, as the multiplications take much too long with
* short delays. This is a "reasonable" implementation, though (and the
* first constant multiplications gets optimized away if the delay is
* a constant)
* close approximation borrowed from m68knommu to avoid 64-bit math
*/
#define HZSCALE (268435456 / (1000000/HZ))
static inline void udelay(unsigned long usecs)
{
extern unsigned long loops_per_jiffy;
__delay(usecs * loops_per_jiffy / (1000000 / HZ));
__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
}
#endif
arch/blackfin/include/asm/gpio.h
View file @ 43769f10
......@@ -27,60 +27,6 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Number BF537/6/4 BF561 BF533/2/1
* BF527/5/2
*
* GPIO_0 PF0 PF0 PF0
* GPIO_1 PF1 PF1 PF1
* GPIO_2 PF2 PF2 PF2
* GPIO_3 PF3 PF3 PF3
* GPIO_4 PF4 PF4 PF4
* GPIO_5 PF5 PF5 PF5
* GPIO_6 PF6 PF6 PF6
* GPIO_7 PF7 PF7 PF7
* GPIO_8 PF8 PF8 PF8
* GPIO_9 PF9 PF9 PF9
* GPIO_10 PF10 PF10 PF10
* GPIO_11 PF11 PF11 PF11
* GPIO_12 PF12 PF12 PF12
* GPIO_13 PF13 PF13 PF13
* GPIO_14 PF14 PF14 PF14
* GPIO_15 PF15 PF15 PF15
* GPIO_16 PG0 PF16
* GPIO_17 PG1 PF17
* GPIO_18 PG2 PF18
* GPIO_19 PG3 PF19
* GPIO_20 PG4 PF20
* GPIO_21 PG5 PF21
* GPIO_22 PG6 PF22
* GPIO_23 PG7 PF23
* GPIO_24 PG8 PF24
* GPIO_25 PG9 PF25
* GPIO_26 PG10 PF26
* GPIO_27 PG11 PF27
* GPIO_28 PG12 PF28
* GPIO_29 PG13 PF29
* GPIO_30 PG14 PF30
* GPIO_31 PG15 PF31
* GPIO_32 PH0 PF32
* GPIO_33 PH1 PF33
* GPIO_34 PH2 PF34
* GPIO_35 PH3 PF35
* GPIO_36 PH4 PF36
* GPIO_37 PH5 PF37
* GPIO_38 PH6 PF38
* GPIO_39 PH7 PF39
* GPIO_40 PH8 PF40
* GPIO_41 PH9 PF41
* GPIO_42 PH10 PF42
* GPIO_43 PH11 PF43
* GPIO_44 PH12 PF44
* GPIO_45 PH13 PF45
* GPIO_46 PH14 PF46
* GPIO_47 PH15 PF47
*/
#ifndef __ARCH_BLACKFIN_GPIO_H__
#define __ARCH_BLACKFIN_GPIO_H__
......@@ -295,10 +241,6 @@ int bfin_gpio_direction_output(unsigned gpio, int value);
int bfin_gpio_get_value(unsigned gpio);
void bfin_gpio_set_value(unsigned gpio, int value);
#ifndef BF548_FAMILY
#define bfin_gpio_set_value(gpio, value) set_gpio_data(gpio, value)
#endif
#ifdef CONFIG_GPIOLIB
#include <asm-generic/gpio.h> /* cansleep wrappers */
......
arch/blackfin/include/asm/kgdb.h
View file @ 43769f10
/*
* File: include/asm-blackfin/kgdb.h
* Based on:
* Author: Sonic Zhang
*
* Created:
* Description:
*
* Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
*
* Modified:
* Copyright 2005-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
/* Blackfin KGDB header
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* Copyright 2005-2009 Analog Devices Inc.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* Licensed under the GPL-2 or later.
*/
#ifndef __ASM_BLACKFIN_KGDB_H__
......@@ -37,17 +13,18 @@
/* gdb locks */
#define KGDB_MAX_NO_CPUS 8
/************************************************************************/
/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
/* at least NUMREGBYTES*2 are needed for register packets */
/* Longer buffer is needed to list all threads */
/*
* BUFMAX defines the maximum number of characters in inbound/outbound buffers.
* At least NUMREGBYTES*2 are needed for register packets.
* Longer buffer is needed to list all threads.
*/
#define BUFMAX 2048
/*
* Note that this register image is different from
* the register image that Linux produces at interrupt time.
*
* Linux's register image is defined by struct pt_regs in ptrace.h.
* Note that this register image is different from
* the register image that Linux produces at interrupt time.
*
* Linux's register image is defined by struct pt_regs in ptrace.h.
*/
enum regnames {
/* Core Registers */
......@@ -104,14 +81,14 @@ enum regnames {
BFIN_RETX,
BFIN_RETN,
BFIN_RETE,
/* Pseudo Registers */
BFIN_PC,
BFIN_CC,
BFIN_EXTRA1, /* Address of .text section. */
BFIN_EXTRA2, /* Address of .data section. */
BFIN_EXTRA3, /* Address of .bss section. */
BFIN_FDPIC_EXEC,
BFIN_FDPIC_EXEC,
BFIN_FDPIC_INTERP,
/* MMRs */
......@@ -126,7 +103,7 @@ enum regnames {
static inline void arch_kgdb_breakpoint(void)
{
asm(" EXCPT 2;");
asm("EXCPT 2;");
}
#define BREAK_INSTR_SIZE 2
#define CACHE_FLUSH_IS_SAFE 1
......
arch/blackfin/include/asm/mem_init.h
View file @ 43769f10
......@@ -115,7 +115,7 @@
#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
/* Enable SCLK Out */
#define mem_SDGCTL (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
#else
#define mem_SDRRC CONFIG_MEM_SDRRC
#define mem_SDGCTL CONFIG_MEM_SDGCTL
......
arch/blackfin/include/asm/pda.h
View file @ 43769f10
......@@ -59,6 +59,7 @@ struct blackfin_pda { /* Per-processor Data Area */
unsigned long icplb_fault_addr;
unsigned long retx;
unsigned long seqstat;
unsigned int __nmi_count; /* number of times NMI asserted on this CPU */
};
extern struct blackfin_pda cpu_pda[];
......
arch/blackfin/include/asm/reboot.h
View file @ 43769f10
......@@ -15,6 +15,6 @@ extern void native_machine_halt(void);
extern void native_machine_power_off(void);
/* common reboot workarounds */
extern void bfin_gpio_reset_spi0_ssel1(void);
extern void bfin_reset_boot_spi_cs(unsigned short pin);
#endif
arch/blackfin/kernel/Makefile
View file @ 43769f10
......@@ -15,6 +15,8 @@ else
obj-y += time.o
endif
CFLAGS_kgdb_test.o := -mlong-calls -O0
obj-$(CONFIG_IPIPE) += ipipe.o
obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
......
arch/blackfin/kernel/bfin_dma_5xx.c
View file @ 43769f10
......@@ -249,6 +249,13 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u
spin_lock_irqsave(&mdma_lock, flags);
/* Force a sync in case a previous config reset on this channel
* occurred. This is needed so subsequent writes to DMA registers
* are not spuriously lost/corrupted. Do it under irq lock and
* without the anomaly version (because we are atomic already).
*/
__builtin_bfin_ssync();
if (bfin_read_MDMA_S0_CONFIG())
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
continue;
......
arch/blackfin/kernel/bfin_gpio.c
View file @ 43769f10
This diff is collapsed.
arch/blackfin/kernel/cplb-mpu/cplbinit.c
View file @ 43769f10
......@@ -63,10 +63,8 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
dcplb_tbl[cpu][i_d].addr = 0;
dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
#if 0
icplb_tbl[cpu][i_i].addr = 0;
icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB;
#endif
icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
/* Cover kernel memory with 4M pages. */
addr = 0;
......
arch/blackfin/kernel/cplb-nompu/cplbmgr.c
View file @ 43769f10
......@@ -163,12 +163,14 @@ MGR_ATTR static int icplb_miss(int cpu)
nr_icplb_supv_miss[cpu]++;
base = 0;
for (idx = 0; idx < icplb_nr_bounds; idx++) {
idx = 0;
do {
eaddr = icplb_bounds[idx].eaddr;
if (addr < eaddr)
break;
base = eaddr;
}
} while (++idx < icplb_nr_bounds);
if (unlikely(idx == icplb_nr_bounds))
return CPLB_NO_ADDR_MATCH;
......@@ -208,12 +210,14 @@ MGR_ATTR static int dcplb_miss(int cpu)
nr_dcplb_supv_miss[cpu]++;
base = 0;
for (idx = 0; idx < dcplb_nr_bounds; idx++) {
idx = 0;
do {
eaddr = dcplb_bounds[idx].eaddr;
if (addr < eaddr)
break;
base = eaddr;
}
} while (++idx < dcplb_nr_bounds);
if (unlikely(idx == dcplb_nr_bounds))
return CPLB_NO_ADDR_MATCH;
......
arch/blackfin/kernel/irqchip.c
View file @ 43769f10
......@@ -35,6 +35,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/trace.h>
#include <asm/pda.h>
static atomic_t irq_err_count;
static spinlock_t irq_controller_lock;
......@@ -91,8 +92,13 @@ int show_interrupts(struct seq_file *p, void *v)
seq_putc(p, '\n');
skip:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS)
} else if (i == NR_IRQS) {
seq_printf(p, "NMI: ");
for_each_online_cpu(j)
seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
seq_printf(p, " CORE Non Maskable Interrupt\n");
seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
}
return 0;
}
......
arch/blackfin/kernel/reboot.c
View file @ 43769f10
......@@ -20,8 +20,8 @@
* reset while the Core B bit (on dual core parts) is cleared by
* the core reset.
*/
__attribute__((l1_text))
static void _bfin_reset(void)
__attribute__ ((__l1_text__, __noreturn__))
static void bfin_reset(void)
{
/* Wait for completion of "system" events such as cache line
* line fills so that we avoid infinite stalls later on as
......@@ -30,7 +30,11 @@ static void _bfin_reset(void)
*/
__builtin_bfin_ssync();
while (1) {
/* The bootrom checks to see how it was reset and will
* automatically perform a software reset for us when
* it starts executing after the core reset.
*/
if (ANOMALY_05000353 || ANOMALY_05000386) {
/* Initiate System software reset. */
bfin_write_SWRST(0x7);
......@@ -50,6 +54,11 @@ static void _bfin_reset(void)
/* Clear System software reset */
bfin_write_SWRST(0);
/* The BF526 ROM will crash during reset */
#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
bfin_read_SWRST();
#endif
/* Wait for the SWRST write to complete. Cannot rely on SSYNC
* though as the System state is all reset now.
*/
......@@ -60,22 +69,11 @@ static void _bfin_reset(void)
: "a" (15 * 1)
: "LC1", "LB1", "LT1"
);
}
while (1)
/* Issue core reset */
asm("raise 1");
}
}
static void bfin_reset(void)
{
if (ANOMALY_05000353 || ANOMALY_05000386)
_bfin_reset();
else
/* the bootrom checks to see how it was reset and will
* automatically perform a software reset for us when
* it starts executing boot
*/
asm("raise 1;");
}
__attribute__((weak))
......
arch/blackfin/kernel/setup.c
View file @ 43769f10
......@@ -60,7 +60,7 @@ void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat,
#define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */
#define BFIN_MEMMAP_RAM 1
#define BFIN_MEMMAP_RESERVED 2
struct bfin_memmap {
static struct bfin_memmap {
int nr_map;
struct bfin_memmap_entry {
unsigned long long addr; /* start of memory segment */
......@@ -824,7 +824,15 @@ void __init setup_arch(char **cmdline_p)
flash_probe();
#endif
printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
/* Newer parts mirror SWRST bits in SYSCR */
#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \
defined(CONFIG_BF538) || defined(CONFIG_BF539)
_bfin_swrst = bfin_read_SWRST();
#else
_bfin_swrst = bfin_read_SYSCR();
#endif
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
......@@ -853,7 +861,7 @@ void __init setup_arch(char **cmdline_p)
else if (_bfin_swrst & RESET_SOFTWARE)
printk(KERN_NOTICE "Reset caused by Software reset\n");
printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n");
printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
if (bfin_compiled_revid() == 0xffff)
printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
else if (bfin_compiled_revid() == -1)
......
arch/blackfin/kernel/traps.c
View file @ 43769f10
......@@ -673,6 +673,14 @@ static void decode_instruction(unsigned short *address)
verbose_printk("RTI");
else if (opcode == 0x0012)
verbose_printk("RTX");
else if (opcode == 0x0013)
verbose_printk("RTN");
else if (opcode == 0x0014)
verbose_printk("RTE");
else if (opcode == 0x0025)
verbose_printk("EMUEXCPT");
else if (opcode == 0x0040 && opcode <= 0x0047)
verbose_printk("STI R%i", opcode & 7);
else if (opcode >= 0x0050 && opcode <= 0x0057)
verbose_printk("JUMP (P%i)", opcode & 7);
else if (opcode >= 0x0060 && opcode <= 0x0067)
......@@ -681,6 +689,10 @@ static void decode_instruction(unsigned short *address)
verbose_printk("CALL (PC+P%i)", opcode & 7);
else if (opcode >= 0x0080 && opcode <= 0x0087)
verbose_printk("JUMP (PC+P%i)", opcode & 7);
else if (opcode >= 0x0090 && opcode <= 0x009F)
verbose_printk("RAISE 0x%x", opcode & 0xF);
else if (opcode >= 0x00A0 && opcode <= 0x00AF)
verbose_printk("EXCPT 0x%x", opcode & 0xF);
else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
verbose_printk("IF !CC JUMP");
else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
......@@ -820,11 +832,8 @@ void show_stack(struct task_struct *task, unsigned long *stack)
decode_address(buf, (unsigned int)stack);
printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
addr = (unsigned int *)((unsigned int)stack & ~0x3F);
/* First thing is to look for a frame pointer */
for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
addr < endstack; addr++, i++) {
for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
if (*addr & 0x1)
continue;
ins_addr = (unsigned short *)*addr;
......@@ -834,7 +843,8 @@ void show_stack(struct task_struct *task, unsigned long *stack)
if (fp) {
/* Let's check to see if it is a frame pointer */
while (fp >= (addr - 1) && fp < endstack && fp)
while (fp >= (addr - 1) && fp < endstack
&& fp && ((unsigned int) fp & 0x3) == 0)
fp = (unsigned int *)*fp;
if (fp == 0 || fp == endstack) {
fp = addr - 1;
......@@ -1052,8 +1062,9 @@ void show_regs(struct pt_regs *fp)
char buf [150];
struct irqaction *action;
unsigned int i;
unsigned long flags;
unsigned long flags = 0;
unsigned int cpu = smp_processor_id();
unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
......@@ -1073,17 +1084,22 @@ void show_regs(struct pt_regs *fp)
}
verbose_printk(KERN_NOTICE " EXCAUSE : 0x%lx\n",
fp->seqstat & SEQSTAT_EXCAUSE);
for (i = 6; i <= 15 ; i++) {
for (i = 2; i <= 15 ; i++) {
if (fp->ipend & (1 << i)) {
decode_address(buf, bfin_read32(EVT0 + 4*i));
verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf);
if (i != 4) {
decode_address(buf, bfin_read32(EVT0 + 4*i));
verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf);
} else
verbose_printk(KERN_NOTICE " interrupts disabled\n");
}
}
/* if no interrupts are going off, don't print this out */
if (fp->ipend & ~0x3F) {
for (i = 0; i < (NR_IRQS - 1); i++) {
spin_lock_irqsave(&irq_desc[i].lock, flags);
if (!in_atomic)
spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
if (!action)
goto unlock;
......@@ -1096,7 +1112,8 @@ void show_regs(struct pt_regs *fp)
}
verbose_printk("\n");
unlock:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
if (!in_atomic)
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
}
}
......
arch/blackfin/mach-bf518/boards/ezbrd.c
View file @ 43769f10
......@@ -46,6 +46,7 @@
#include <asm/dpmc.h>
#include <asm/bfin_sdh.h>
#include <linux/spi/ad7877.h>
#include <net/dsa.h>
/*
* Name the Board for the /proc/cpuinfo
......@@ -104,8 +105,31 @@ static struct platform_device rtc_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
static struct dsa_platform_data ksz8893m_switch_data = {
.mii_bus = &bfin_mii_bus.dev,
.netdev = &bfin_mac_device.dev,
.port_names[0] = NULL,
.port_names[1] = "eth%d",
.port_names[2] = "eth%d",
.port_names[3] = "cpu",
};
static struct platform_device ksz8893m_switch_device = {
.name = "dsa",
.id = 0,
.num_resources = 0,
.dev.platform_data = &ksz8893m_switch_data,
};
#endif
......@@ -147,6 +171,15 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
};
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
/* SPI SWITCH CHIP */
static struct bfin5xx_spi_chip spi_switch_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
......@@ -226,6 +259,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
{
.modalias = "ksz8893m",
.max_speed_hz = 5000000,
.bus_num = 0,
.chip_select = 1,
.platform_data = NULL,
.controller_data = &spi_switch_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
......@@ -473,7 +519,6 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
......@@ -487,7 +532,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
......@@ -584,9 +628,14 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
&ksz8893m_switch_device,
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
&bfin_spi1_device,
......@@ -632,12 +681,8 @@ static struct platform_device *stamp_devices[] __initdata = {
static int __init ezbrd_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
......@@ -649,7 +694,7 @@ void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)
......
arch/blackfin/mach-bf518/include/mach/portmux.h
View file @ 43769f10
......@@ -103,6 +103,8 @@
#define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
#define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
/* SPORT Port Mux */
#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
......
arch/blackfin/mach-bf527/boards/cm_bf527.c
View file @ 43769f10
......@@ -403,8 +403,13 @@ static struct platform_device isp1362_hcd_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
......@@ -793,7 +798,6 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
......@@ -809,7 +813,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
......@@ -920,6 +923,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
......@@ -968,27 +972,23 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_gpios_device,
};
static int __init stamp_init(void)
static int __init cm_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
arch_initcall(stamp_init);
arch_initcall(cm_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)
......
arch/blackfin/mach-bf527/boards/ezbrd.c
View file @ 43769f10
......@@ -208,8 +208,13 @@ static struct platform_device rtc_device = {
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
......@@ -590,7 +595,6 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
......@@ -604,7 +608,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
......@@ -720,6 +723,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
......@@ -764,27 +768,23 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_gpios_device,
};
static int __init stamp_init(void)
static int __init ezbrd_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
arch_initcall(stamp_init);
arch_initcall(ezbrd_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)
......
arch/blackfin/mach-bf527/boards/ezkit.c
View file @ 43769f10
......@@ -425,8 +425,13 @@ static struct platform_device isp1362_hcd_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
......@@ -830,7 +835,6 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
......@@ -844,7 +848,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
......@@ -988,6 +991,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
......@@ -1048,27 +1052,23 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_gpios_device,
};
static int __init stamp_init(void)
static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
arch_initcall(stamp_init);
arch_initcall(ezkit_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)
......
arch/blackfin/mach-bf527/include/mach/portmux.h
View file @ 43769f10
......@@ -73,6 +73,8 @@
#define P_HWAIT (P_DONTCARE)
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))
......
arch/blackfin/mach-bf533/boards/blackstamp.c
View file @ 43769f10
......@@ -309,10 +309,8 @@ static struct platform_device i2c_gpio_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
};
#endif
static const unsigned int cclk_vlev_datasheet[] =
{
......@@ -390,10 +388,8 @@ static int __init blackstamp_init(void)
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
if (ret < 0)
......
arch/blackfin/mach-bf533/boards/stamp.c
View file @ 43769f10
......@@ -441,7 +441,6 @@ static struct platform_device i2c_gpio_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
......@@ -461,7 +460,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
static const unsigned int cclk_vlev_datasheet[] =
{
......@@ -550,10 +548,8 @@ static int __init stamp_init(void)
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
if (ret < 0)
......
arch/blackfin/mach-bf533/include/mach/portmux.h
View file @ 43769f10
......@@ -54,14 +54,11 @@
#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2))
#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1))
#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0))
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
#define P_TMR2 (P_DONTCARE)
#define P_TMR1 (P_DONTCARE)
#define P_TMR0 (P_DONTCARE)
#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1))
#endif /* _MACH_PORTMUX_H_ */
arch/blackfin/mach-bf537/boards/cm_bf537.c
View file @ 43769f10
......@@ -479,8 +479,13 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
......@@ -591,6 +596,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
......
arch/blackfin/mach-bf537/boards/generic_board.c
View file @ 43769f10
......@@ -262,8 +262,13 @@ static struct platform_device isp1362_hcd_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
......@@ -662,6 +667,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
......@@ -708,7 +714,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
};
static int __init stamp_init(void)
static int __init generic_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
......@@ -720,13 +726,13 @@ static int __init stamp_init(void)
return 0;
}
arch_initcall(stamp_init);
arch_initcall(generic_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
......
arch/blackfin/mach-bf537/boards/minotaur.c
View file @ 43769f10
......@@ -61,8 +61,13 @@ static struct platform_device rtc_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
......@@ -324,6 +329,7 @@ static struct platform_device *minotaur_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
......@@ -377,5 +383,5 @@ void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
arch/blackfin/mach-bf537/boards/pnav10.c
View file @ 43769f10
......@@ -198,8 +198,13 @@ static struct platform_device isp1362_hcd_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
......@@ -529,6 +534,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
......@@ -558,7 +564,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
};
static int __init stamp_init(void)
static int __init pnav_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
......@@ -569,7 +575,7 @@ static int __init stamp_init(void)
return 0;
}
arch_initcall(stamp_init);
arch_initcall(pnav_init);
void bfin_get_ether_addr(char *addr)
{
......
arch/blackfin/mach-bf537/boards/stamp.c
View file @ 43769f10
......@@ -321,8 +321,13 @@ static struct platform_device isp1362_hcd_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
......@@ -1068,7 +1073,6 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
......@@ -1102,7 +1106,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
......@@ -1217,6 +1220,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
......@@ -1284,12 +1288,8 @@ static struct platform_device *stamp_devices[] __initdata = {
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
bfin_plat_nand_init();
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
......@@ -1307,7 +1307,7 @@ void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
/*
......
arch/blackfin/mach-bf537/boards/tcm_bf537.c
View file @ 43769f10
......@@ -481,8 +481,13 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
......@@ -593,6 +598,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
......@@ -615,7 +621,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
&bfin_gpios_device,
};
static int __init cm_bf537_init(void)
static int __init tcm_bf537_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
......@@ -629,7 +635,7 @@ static int __init cm_bf537_init(void)
return 0;
}
arch_initcall(cm_bf537_init);
arch_initcall(tcm_bf537_init);
void bfin_get_ether_addr(char *addr)
{
......
arch/blackfin/mach-bf537/include/mach/portmux.h
View file @ 43769f10
......@@ -31,6 +31,7 @@
#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
#define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
......
arch/blackfin/mach-bf538/include/mach/portmux.h
View file @ 43769f10
......@@ -102,5 +102,6 @@
#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2))
#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1))
#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0))
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
#endif /* _MACH_PORTMUX_H_ */
arch/blackfin/mach-bf548/boards/ezkit.c
View file @ 43769f10
......@@ -781,7 +781,6 @@ static struct platform_device i2c_bfin_twi1_device = {
#endif
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
};
......@@ -800,7 +799,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
#endif
};
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/gpio_keys.h>
......@@ -956,13 +954,11 @@ static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info0,
ARRAY_SIZE(bfin_i2c_board_info0));
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
i2c_register_board_info(1, bfin_i2c_board_info1,
ARRAY_SIZE(bfin_i2c_board_info1));
#endif
#endif
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
......
arch/blackfin/mach-bf548/include/mach/anomaly.h
View file @ 43769f10
......@@ -175,6 +175,7 @@
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
......
arch/blackfin/mach-bf548/include/mach/bf548.h
View file @ 43769f10
......@@ -104,6 +104,18 @@
#define AMGCTLVAL (V_AMBEN | V_AMCKEN)
#if defined(CONFIG_BF542M)
# define CONFIG_BF542
#elif defined(CONFIG_BF544M)
# define CONFIG_BF544
#elif defined(CONFIG_BF547M)
# define CONFIG_BF547
#elif defined(CONFIG_BF548M)
# define CONFIG_BF548
#elif defined(CONFIG_BF549M)
# define CONFIG_BF549
#endif
#if defined(CONFIG_BF542)
# define CPU "BF542"
# define CPUID 0x27de
......
arch/blackfin/mach-bf548/include/mach/gpio.h
View file @ 43769f10
......@@ -195,17 +195,17 @@
struct gpio_port_t {
unsigned short port_fer;
unsigned short dummy1;
unsigned short port_data;
unsigned short data;
unsigned short dummy2;
unsigned short port_set;
unsigned short data_set;
unsigned short dummy3;
unsigned short port_clear;
unsigned short data_clear;
unsigned short dummy4;
unsigned short port_dir_set;
unsigned short dir_set;
unsigned short dummy5;
unsigned short port_dir_clear;
unsigned short dir_clear;
unsigned short dummy6;
unsigned short port_inen;
unsigned short inen;
unsigned short dummy7;
unsigned int port_mux;
};
......
arch/blackfin/mach-bf548/include/mach/portmux.h
View file @ 43769f10
......@@ -125,6 +125,7 @@
#define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
#define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0))
......
arch/blackfin/mach-bf561/include/mach/defBF561.h
View file @ 43769f10
......@@ -1106,6 +1106,8 @@
#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */
#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */
#define POL 0x0000C000 /* PPI Signal Polarities */
#define POLC 0x4000 /* PPI Clock Polarity */
#define POLS 0x8000 /* PPI Frame Sync Polarity */
/* PPI_STATUS Masks */
#define FLD 0x00000400 /* Field Indicator */
......
arch/blackfin/mach-bf561/include/mach/portmux.h
View file @ 43769f10
......@@ -85,5 +85,6 @@
#define P_SPI0_MOSI (P_DONTCARE)
#define P_SPI0_MISO (P_DONTCARE)
#define P_SPI0_SCK (P_DONTCARE)
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
#endif /* _MACH_PORTMUX_H_ */
arch/blackfin/mach-common/clocks-init.c
View file @ 43769f10
......@@ -14,6 +14,7 @@
#include <asm/clocks.h>
#include <asm/mem_init.h>
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
(PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
......@@ -76,7 +77,7 @@ void init_clocks(void)
bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
#ifdef EBIU_SDGCTL
bfin_write_EBIU_SDRRC(mem_SDRRC);
bfin_write_EBIU_SDGCTL(mem_SDGCTL);
bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL);
#else
bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
do_sync();
......
arch/blackfin/mach-common/entry.S
View file @ 43769f10
......@@ -151,13 +151,6 @@ ENTRY(_ex_syscall)
jump.s _bfin_return_from_exception;
ENDPROC(_ex_syscall)
ENTRY(_ex_soft_bp)
r7 = retx;
r7 += -2;
retx = r7;
jump.s _ex_trap_c;
ENDPROC(_ex_soft_bp)
ENTRY(_ex_single_step)
/* If we just returned from an interrupt, the single step event is
for the RTI instruction. */
......@@ -1087,7 +1080,7 @@ ENTRY(_ex_table)
* EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
*/
.long _ex_syscall /* 0x00 - User Defined - Linux Syscall */
.long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
.long _ex_trap_c /* 0x01 - User Defined - Software breakpoint */
#ifdef CONFIG_KGDB
.long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection
and break signal trap */
......
arch/blackfin/mach-common/head.S
View file @ 43769f10
......@@ -17,6 +17,19 @@
__INIT
ENTRY(__init_clear_bss)
r2 = r2 - r1;
cc = r2 == 0;
if cc jump .L_bss_done;
r2 >>= 2;
p1 = r1;
p2 = r2;
lsetup (1f, 1f) lc0 = p2;
1: [p1++] = r0;
.L_bss_done:
rts;
ENDPROC(__init_clear_bss)
#define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
ENTRY(__start)
......@@ -144,6 +157,35 @@ ENTRY(__start)
call _init_early_exception_vectors;
#endif
r0 = 0 (x);
/* Zero out all of the fun bss regions */
#if L1_DATA_A_LENGTH > 0
r1.l = __sbss_l1;
r1.h = __sbss_l1;
r2.l = __ebss_l1;
r2.h = __ebss_l1;
call __init_clear_bss
#endif
#if L1_DATA_B_LENGTH > 0
r1.l = __sbss_b_l1;
r1.h = __sbss_b_l1;
r2.l = __ebss_b_l1;
r2.h = __ebss_b_l1;
call __init_clear_bss
#endif
#if L2_LENGTH > 0
r1.l = __sbss_l2;
r1.h = __sbss_l2;
r2.l = __ebss_l2;
r2.h = __ebss_l2;
call __init_clear_bss
#endif
r1.l = ___bss_start;
r1.h = ___bss_start;
r2.l = ___bss_stop;
r2.h = ___bss_stop;
call __init_clear_bss
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bfin_relocate_l1_mem;
#ifdef CONFIG_BFIN_KERNEL_CLOCK
......@@ -185,19 +227,6 @@ ENDPROC(__start)
# define WDOG_CTL WDOGA_CTL
#endif
ENTRY(__init_clear_bss)
r2 = r2 - r1;
cc = r2 == 0;
if cc jump .L_bss_done;
r2 >>= 2;
p1 = r1;
p2 = r2;
lsetup (1f, 1f) lc0 = p2;
1: [p1++] = r0;
.L_bss_done:
rts;
ENDPROC(__init_clear_bss)
ENTRY(_real_start)
/* Enable nested interrupts */
[--sp] = reti;
......@@ -209,35 +238,6 @@ ENTRY(_real_start)
w[p0] = r0;
ssync;
r0 = 0 (x);
/* Zero out all of the fun bss regions */
#if L1_DATA_A_LENGTH > 0
r1.l = __sbss_l1;
r1.h = __sbss_l1;
r2.l = __ebss_l1;
r2.h = __ebss_l1;
call __init_clear_bss
#endif
#if L1_DATA_B_LENGTH > 0
r1.l = __sbss_b_l1;
r1.h = __sbss_b_l1;
r2.l = __ebss_b_l1;
r2.h = __ebss_b_l1;
call __init_clear_bss
#endif
#if L2_LENGTH > 0
r1.l = __sbss_l2;
r1.h = __sbss_l2;
r2.l = __ebss_l2;
r2.h = __ebss_l2;
call __init_clear_bss
#endif
r1.l = ___bss_start;
r1.h = ___bss_start;
r2.l = ___bss_stop;
r2.h = ___bss_stop;
call __init_clear_bss
/* Pass the u-boot arguments to the global value command line */
R0 = R7;
call _cmdline_init;
......
arch/blackfin/mach-common/interrupt.S
View file @ 43769f10
......@@ -195,7 +195,7 @@ ENDPROC(_evt_ivhw)
/* Interrupt routine for evt2 (NMI).
* We don't actually use this, so just return.
* For inner circle type details, please see:
* http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi
* http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
*/
ENTRY(_evt_nmi)
.weak _evt_nmi
......
arch/blackfin/mach-common/ints-priority.c
View file @ 43769f10
......@@ -1101,10 +1101,9 @@ int __init init_arch_irq(void)
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
|| defined(BF538_FAMILY) || defined(CONFIG_BF51x)
#ifdef SIC_IWR0
bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
# ifdef SIC_IWR1
/* BF52x/BF51x system reset does not properly reset SIC_IWR1 which
* will screw up the bootrom as it relies on MDMA0/1 waking it
* up from IDLE instructions. See this report for more info:
......@@ -1114,10 +1113,8 @@ int __init init_arch_irq(void)
bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
else
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
#else
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
#endif
# ifdef CONFIG_BF54x
# endif
# ifdef SIC_IWR2
bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
# endif
#else
......
arch/blackfin/mach-common/pm.c
View file @ 43769f10
......@@ -82,10 +82,9 @@ void bfin_pm_suspend_standby_enter(void)
bfin_pm_standby_restore();
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \
defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x)
#ifdef SIC_IWR0
bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
# ifdef SIC_IWR1
/* BF52x system reset does not properly reset SIC_IWR1 which
* will screw up the bootrom as it relies on MDMA0/1 waking it
* up from IDLE instructions. See this report for more info:
......@@ -95,10 +94,8 @@ void bfin_pm_suspend_standby_enter(void)
bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
else
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
#else
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
#endif
# ifdef CONFIG_BF54x
# endif
# ifdef SIC_IWR2
bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
# endif
#else
......
arch/sparc/include/asm/cpudata_64.h
View file @ 43769f10
......@@ -17,7 +17,7 @@
typedef struct {
/* Dcache line 1 */
unsigned int __softirq_pending; /* must be 1st, see rtrap.S */
unsigned int __pad0;
unsigned int __nmi_count;
unsigned long clock_tick; /* %tick's per second */
unsigned long __pad;
unsigned int __pad1;
......
arch/sparc/include/asm/irq_64.h
View file @ 43769f10
......@@ -66,9 +66,6 @@ extern void virt_irq_free(unsigned int virt_irq);
extern void __init init_IRQ(void);
extern void fixup_irqs(void);
extern int register_perfctr_intr(void (*handler)(struct pt_regs *));
extern void release_perfctr_intr(void (*handler)(struct pt_regs *));
static inline void set_softint(unsigned long bits)
{
__asm__ __volatile__("wr %0, 0x0, %%set_softint"
......@@ -98,5 +95,6 @@ void __trigger_all_cpu_backtrace(void);
extern void *hardirq_stack[NR_CPUS];
extern void *softirq_stack[NR_CPUS];
#define __ARCH_HAS_DO_SOFTIRQ
#define ARCH_HAS_NMI_WATCHDOG
#endif
arch/sparc/include/asm/kdebug_64.h
View file @ 43769f10
......@@ -14,6 +14,8 @@ enum die_val {
DIE_TRAP,
DIE_TRAP_TL1,
DIE_CALL,
DIE_NMI,
DIE_NMIWATCHDOG,
};
#endif
arch/sparc/include/asm/nmi.h 0 → 100644
View file @ 43769f10
#ifndef __NMI_H
#define __NMI_H
extern int __init nmi_init(void);
extern void perfctr_irq(int irq, struct pt_regs *regs);
extern void nmi_adjust_hz(unsigned int new_hz);
extern int nmi_usable;
#endif /* __NMI_H */
arch/sparc/include/asm/pcr.h 0 → 100644
View file @ 43769f10
#ifndef __PCR_H
#define __PCR_H
struct pcr_ops {
u64 (*read)(void);
void (*write)(u64);
};
extern const struct pcr_ops *pcr_ops;
extern void deferred_pcr_work_irq(int irq, struct pt_regs *regs);
extern void schedule_deferred_pcr_work(void);
#define PCR_PIC_PRIV 0x00000001 /* PIC access is privileged */
#define PCR_STRACE 0x00000002 /* Trace supervisor events */
#define PCR_UTRACE 0x00000004 /* Trace user events */
#define PCR_N2_HTRACE 0x00000008 /* Trace hypervisor events */
#define PCR_N2_TOE_OV0 0x00000010 /* Trap if PIC 0 overflows */
#define PCR_N2_TOE_OV1 0x00000020 /* Trap if PIC 1 overflows */
#define PCR_N2_MASK0 0x00003fc0
#define PCR_N2_MASK0_SHIFT 6
#define PCR_N2_SL0 0x0003c000
#define PCR_N2_SL0_SHIFT 14
#define PCR_N2_OV0 0x00040000
#define PCR_N2_MASK1 0x07f80000
#define PCR_N2_MASK1_SHIFT 19
#define PCR_N2_SL1 0x78000000
#define PCR_N2_SL1_SHIFT 27
#define PCR_N2_OV1 0x80000000
extern unsigned int picl_shift;
/* In order to commonize as much of the implementation as
* possible, we use PICH as our counter. Mostly this is
* to accomodate Niagara-1 which can only count insn cycles
* in PICH.
*/
static inline u64 picl_value(unsigned int nmi_hz)
{
u32 delta = local_cpu_data().clock_tick / (nmi_hz << picl_shift);
return ((u64)((0 - delta) & 0xffffffff)) << 32;
}
extern u64 pcr_enable;
#endif /* __PCR_H */
arch/sparc/include/asm/pil.h
View file @ 43769f10
......@@ -23,6 +23,7 @@
#define PIL_SMP_CTX_NEW_VERSION 4
#define PIL_DEVICE_IRQ 5
#define PIL_SMP_CALL_FUNC_SNGL 6
#define PIL_DEFERRED_PCR_WORK 7
#define PIL_NORMAL_MAX 14
#define PIL_NMI 15
......
arch/sparc/kernel/Makefile
View file @ 43769f10
......@@ -52,6 +52,8 @@ obj-$(CONFIG_SPARC64) += visemul.o
obj-$(CONFIG_SPARC64) += hvapi.o
obj-$(CONFIG_SPARC64) += sstate.o
obj-$(CONFIG_SPARC64) += mdesc.o
obj-$(CONFIG_SPARC64) += pcr.o
obj-$(CONFIG_SPARC64) += nmi.o
# sparc32 do not use GENERIC_HARDIRQS but uses the generic devres implementation
obj-$(CONFIG_SPARC32) += devres.o
......
arch/sparc/kernel/cpu.c
View file @ 43769f10
......@@ -26,6 +26,7 @@ EXPORT_PER_CPU_SYMBOL(__cpu_data);
struct cpu_info {
int psr_vers;
const char *name;
const char *pmu_name;
};
struct fpu_info {
......@@ -45,6 +46,9 @@ struct manufacturer_info {
#define CPU(ver, _name) \
{ .psr_vers = ver, .name = _name }
#define CPU_PMU(ver, _name, _pmu_name) \
{ .psr_vers = ver, .name = _name, .pmu_name = _pmu_name }
#define FPU(ver, _name) \
{ .fp_vers = ver, .name = _name }
......@@ -183,10 +187,10 @@ static const struct manufacturer_info __initconst manufacturer_info[] = {
},{
0x17,
.cpu_info = {
CPU(0x10, "TI UltraSparc I (SpitFire)"),
CPU(0x11, "TI UltraSparc II (BlackBird)"),
CPU(0x12, "TI UltraSparc IIi (Sabre)"),
CPU(0x13, "TI UltraSparc IIe (Hummingbird)"),
CPU_PMU(0x10, "TI UltraSparc I (SpitFire)", "ultra12"),
CPU_PMU(0x11, "TI UltraSparc II (BlackBird)", "ultra12"),
CPU_PMU(0x12, "TI UltraSparc IIi (Sabre)", "ultra12"),
CPU_PMU(0x13, "TI UltraSparc IIe (Hummingbird)", "ultra12"),
CPU(-1, NULL)
},
.fpu_info = {
......@@ -199,7 +203,7 @@ static const struct manufacturer_info __initconst manufacturer_info[] = {
},{
0x22,
.cpu_info = {
CPU(0x10, "TI UltraSparc I (SpitFire)"),
CPU_PMU(0x10, "TI UltraSparc I (SpitFire)", "ultra12"),
CPU(-1, NULL)
},
.fpu_info = {
......@@ -209,12 +213,12 @@ static const struct manufacturer_info __initconst manufacturer_info[] = {
},{
0x3e,
.cpu_info = {
CPU(0x14, "TI UltraSparc III (Cheetah)"),
CPU(0x15, "TI UltraSparc III+ (Cheetah+)"),
CPU(0x16, "TI UltraSparc IIIi (Jalapeno)"),
CPU(0x18, "TI UltraSparc IV (Jaguar)"),
CPU(0x19, "TI UltraSparc IV+ (Panther)"),
CPU(0x22, "TI UltraSparc IIIi+ (Serrano)"),
CPU_PMU(0x14, "TI UltraSparc III (Cheetah)", "ultra3"),
CPU_PMU(0x15, "TI UltraSparc III+ (Cheetah+)", "ultra3+"),
CPU_PMU(0x16, "TI UltraSparc IIIi (Jalapeno)", "ultra3i"),
CPU_PMU(0x18, "TI UltraSparc IV (Jaguar)", "ultra3+"),
CPU_PMU(0x19, "TI UltraSparc IV+ (Panther)", "ultra4+"),
CPU_PMU(0x22, "TI UltraSparc IIIi+ (Serrano)", "ultra3i"),
CPU(-1, NULL)
},
.fpu_info = {
......@@ -234,6 +238,7 @@ static const struct manufacturer_info __initconst manufacturer_info[] = {
const char *sparc_cpu_type;
const char *sparc_fpu_type;
const char *sparc_pmu_type;
unsigned int fsr_storage;
......@@ -244,6 +249,7 @@ static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers)
sparc_cpu_type = NULL;
sparc_fpu_type = NULL;
sparc_pmu_type = NULL;
manuf = NULL;
for (i = 0; i < ARRAY_SIZE(manufacturer_info); i++)
......@@ -263,6 +269,7 @@ static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers)
{
if (cpu->psr_vers == psr_vers) {
sparc_cpu_type = cpu->name;
sparc_pmu_type = cpu->pmu_name;
sparc_fpu_type = "No FPU";
break;
}
......@@ -290,6 +297,8 @@ static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers)
psr_impl, fpu_vers);
sparc_fpu_type = "Unknown FPU";
}
if (sparc_pmu_type == NULL)
sparc_pmu_type = "Unknown PMU";
}
#ifdef CONFIG_SPARC32
......@@ -315,11 +324,13 @@ static void __init sun4v_cpu_probe(void)
case SUN4V_CHIP_NIAGARA1:
sparc_cpu_type = "UltraSparc T1 (Niagara)";
sparc_fpu_type = "UltraSparc T1 integrated FPU";
sparc_pmu_type = "niagara";
break;
case SUN4V_CHIP_NIAGARA2:
sparc_cpu_type = "UltraSparc T2 (Niagara2)";
sparc_fpu_type = "UltraSparc T2 integrated FPU";
sparc_pmu_type = "niagara2";
break;
default:
......
arch/sparc/kernel/irq_64.c
View file @ 43769f10
......@@ -196,6 +196,11 @@ int show_interrupts(struct seq_file *p, void *v)
seq_putc(p, '\n');
skip:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS) {
seq_printf(p, "NMI: ");
for_each_online_cpu(j)
seq_printf(p, "%10u ", cpu_data(j).__nmi_count);
seq_printf(p, " Non-maskable interrupts\n");
}
return 0;
}
......@@ -778,69 +783,6 @@ void do_softirq(void)
local_irq_restore(flags);
}
static void unhandled_perf_irq(struct pt_regs *regs)
{
unsigned long pcr, pic;
read_pcr(pcr);
read_pic(pic);
write_pcr(0);
printk(KERN_EMERG "CPU %d: Got unexpected perf counter IRQ.\n",
smp_processor_id());
printk(KERN_EMERG "CPU %d: PCR[%016lx] PIC[%016lx]\n",
smp_processor_id(), pcr, pic);
}
/* Almost a direct copy of the powerpc PMC code. */
static DEFINE_SPINLOCK(perf_irq_lock);
static void *perf_irq_owner_caller; /* mostly for debugging */
static void (*perf_irq)(struct pt_regs *regs) = unhandled_perf_irq;
/* Invoked from level 15 PIL handler in trap table. */
void perfctr_irq(int irq, struct pt_regs *regs)
{
clear_softint(1 << irq);
perf_irq(regs);
}
int register_perfctr_intr(void (*handler)(struct pt_regs *))
{
int ret;
if (!handler)
return -EINVAL;
spin_lock(&perf_irq_lock);
if (perf_irq != unhandled_perf_irq) {
printk(KERN_WARNING "register_perfctr_intr: "
"perf IRQ busy (reserved by caller %p)\n",
perf_irq_owner_caller);
ret = -EBUSY;
goto out;
}
perf_irq_owner_caller = __builtin_return_address(0);
perf_irq = handler;
ret = 0;
out:
spin_unlock(&perf_irq_lock);
return ret;
}
EXPORT_SYMBOL_GPL(register_perfctr_intr);
void release_perfctr_intr(void (*handler)(struct pt_regs *))
{
spin_lock(&perf_irq_lock);
perf_irq_owner_caller = NULL;
perf_irq = unhandled_perf_irq;
spin_unlock(&perf_irq_lock);
}
EXPORT_SYMBOL_GPL(release_perfctr_intr);
#ifdef CONFIG_HOTPLUG_CPU
void fixup_irqs(void)
{
......
arch/sparc/kernel/kernel.h
View file @ 43769f10
......@@ -5,6 +5,7 @@
/* cpu.c */
extern const char *sparc_cpu_type;
extern const char *sparc_pmu_type;
extern const char *sparc_fpu_type;
extern unsigned int fsr_storage;
......
arch/sparc/kernel/nmi.c 0 → 100644
View file @ 43769f10
/* Pseudo NMI support on sparc64 systems.
*
* Copyright (C) 2009 David S. Miller <davem@davemloft.net>
*
* The NMI watchdog support and infrastructure is based almost
* entirely upon the x86 NMI support code.
*/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/nmi.h>
#include <linux/module.h>
#include <linux/kprobes.h>
#include <linux/kernel_stat.h>
#include <linux/slab.h>
#include <linux/kdebug.h>
#include <linux/delay.h>
#include <linux/smp.h>
#include <asm/ptrace.h>
#include <asm/local.h>
#include <asm/pcr.h>
/* We don't have a real NMI on sparc64, but we can fake one
* up using profiling counter overflow interrupts and interrupt
* levels.
*
* The profile overflow interrupts at level 15, so we use
* level 14 as our IRQ off level.
*/
static int nmi_watchdog_active;
static int panic_on_timeout;
int nmi_usable;
EXPORT_SYMBOL_GPL(nmi_usable);
static unsigned int nmi_hz = HZ;
static DEFINE_PER_CPU(unsigned int, last_irq_sum);
static DEFINE_PER_CPU(local_t, alert_counter);
static DEFINE_PER_CPU(int, nmi_touch);
void touch_nmi_watchdog(void)
{
if (nmi_watchdog_active) {
int cpu;
for_each_present_cpu(cpu) {
if (per_cpu(nmi_touch, cpu) != 1)
per_cpu(nmi_touch, cpu) = 1;
}
}
touch_softlockup_watchdog();
}
EXPORT_SYMBOL(touch_nmi_watchdog);
static void die_nmi(const char *str, struct pt_regs *regs, int do_panic)
{
if (notify_die(DIE_NMIWATCHDOG, str, regs, 0,
pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
return;
console_verbose();
bust_spinlocks(1);
printk(KERN_EMERG "%s", str);
printk(" on CPU%d, ip %08lx, registers:\n",
smp_processor_id(), regs->tpc);
show_regs(regs);
bust_spinlocks(0);
if (do_panic || panic_on_oops)
panic("Non maskable interrupt");
local_irq_enable();
do_exit(SIGBUS);
}
notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
{
unsigned int sum, touched = 0;
int cpu = smp_processor_id();
clear_softint(1 << irq);
pcr_ops->write(PCR_PIC_PRIV);
local_cpu_data().__nmi_count++;
if (notify_die(DIE_NMI, "nmi", regs, 0,
pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
touched = 1;
sum = kstat_irqs_cpu(0, cpu);
if (__get_cpu_var(nmi_touch)) {
__get_cpu_var(nmi_touch) = 0;
touched = 1;
}
if (!touched && __get_cpu_var(last_irq_sum) == sum) {
local_inc(&__get_cpu_var(alert_counter));
if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
die_nmi("BUG: NMI Watchdog detected LOCKUP",
regs, panic_on_timeout);
} else {
__get_cpu_var(last_irq_sum) = sum;
local_set(&__get_cpu_var(alert_counter), 0);
}
if (nmi_usable) {
write_pic(picl_value(nmi_hz));
pcr_ops->write(pcr_enable);
}
}
static inline unsigned int get_nmi_count(int cpu)
{
return cpu_data(cpu).__nmi_count;
}
static int endflag __initdata;
static __init void nmi_cpu_busy(void *data)
{
local_irq_enable_in_hardirq();
while (endflag == 0)
mb();
}
static void report_broken_nmi(int cpu, int *prev_nmi_count)
{
printk(KERN_CONT "\n");
printk(KERN_WARNING
"WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
printk(KERN_WARNING
"Please report this to bugzilla.kernel.org,\n");
printk(KERN_WARNING
"and attach the output of the 'dmesg' command.\n");
nmi_usable = 0;
}
static void stop_watchdog(void *unused)
{
pcr_ops->write(PCR_PIC_PRIV);
}
static int __init check_nmi_watchdog(void)
{
unsigned int *prev_nmi_count;
int cpu, err;
prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(unsigned int), GFP_KERNEL);
if (!prev_nmi_count) {
err = -ENOMEM;
goto error;
}
printk(KERN_INFO "Testing NMI watchdog ... ");
smp_call_function(nmi_cpu_busy, (void *)&endflag, 0);
for_each_possible_cpu(cpu)
prev_nmi_count[cpu] = get_nmi_count(cpu);
local_irq_enable();
mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
for_each_online_cpu(cpu) {
if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
report_broken_nmi(cpu, prev_nmi_count);
}
endflag = 1;
if (!nmi_usable) {
kfree(prev_nmi_count);
err = -ENODEV;
goto error;
}
printk("OK.\n");
nmi_hz = 1;
kfree(prev_nmi_count);
return 0;
error:
on_each_cpu(stop_watchdog, NULL, 1);
return err;
}
static void start_watchdog(void *unused)
{
pcr_ops->write(PCR_PIC_PRIV);
write_pic(picl_value(nmi_hz));
pcr_ops->write(pcr_enable);
}
void nmi_adjust_hz(unsigned int new_hz)
{
nmi_hz = new_hz;
on_each_cpu(start_watchdog, NULL, 1);
}
EXPORT_SYMBOL_GPL(nmi_adjust_hz);
int __init nmi_init(void)
{
nmi_usable = 1;
on_each_cpu(start_watchdog, NULL, 1);
return check_nmi_watchdog();
}
static int __init setup_nmi_watchdog(char *str)
{
if (!strncmp(str, "panic", 5))
panic_on_timeout = 1;
return 0;
}
__setup("nmi_watchdog=", setup_nmi_watchdog);
arch/sparc/kernel/pcr.c 0 → 100644
View file @ 43769f10
This diff is collapsed.
arch/sparc/kernel/process_64.c
View file @ 43769f10
......@@ -29,6 +29,7 @@
#include <linux/cpu.h>
#include <linux/elfcore.h>
#include <linux/sysrq.h>
#include <linux/nmi.h>
#include <asm/uaccess.h>
#include <asm/system.h>
......@@ -52,8 +53,10 @@
static void sparc64_yield(int cpu)
{
if (tlb_type != hypervisor)
if (tlb_type != hypervisor) {
touch_nmi_watchdog();
return;
}
clear_thread_flag(TIF_POLLING_NRFLAG);
smp_mb__after_clear_bit();
......
arch/sparc/kernel/setup_64.c
View file @ 43769f10
......@@ -354,6 +354,7 @@ static int show_cpuinfo(struct seq_file *m, void *__unused)
seq_printf(m,
"cpu\t\t: %s\n"
"fpu\t\t: %s\n"
"pmu\t\t: %s\n"
"prom\t\t: %s\n"
"type\t\t: %s\n"
"ncpus probed\t: %d\n"
......@@ -366,6 +367,7 @@ static int show_cpuinfo(struct seq_file *m, void *__unused)
,
sparc_cpu_type,
sparc_fpu_type,
sparc_pmu_type,
prom_version,
((tlb_type == hypervisor) ?
"sun4v" :
......
arch/sparc/kernel/ttable.S
View file @ 43769f10
......@@ -63,7 +63,8 @@ tl0_irq6: TRAP_IRQ(smp_call_function_single_client, 6)
#else
tl0_irq6: BTRAP(0x46)
#endif
tl0_irq7: BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
tl0_irq7: TRAP_IRQ(deferred_pcr_work_irq, 7)
tl0_irq8: BTRAP(0x48) BTRAP(0x49)
tl0_irq10: BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d)
tl0_irq14: TRAP_IRQ(timer_interrupt, 14)
tl0_irq15: TRAP_NMI_IRQ(perfctr_irq, 15)
......
arch/sparc/mm/fault_64.c
View file @ 43769f10
......@@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
#include <linux/percpu.h>
#include <asm/page.h>
#include <asm/pgtable.h>
......@@ -224,6 +225,30 @@ static void do_kernel_fault(struct pt_regs *regs, int si_code, int fault_code,
unhandled_fault (address, current, regs);
}
static void noinline bogus_32bit_fault_tpc(struct pt_regs *regs)
{
static int times;
if (times++ < 10)
printk(KERN_ERR "FAULT[%s:%d]: 32-bit process reports "
"64-bit TPC [%lx]\n",
current->comm, current->pid,
regs->tpc);
show_regs(regs);
}
static void noinline bogus_32bit_fault_address(struct pt_regs *regs,
unsigned long addr)
{
static int times;
if (times++ < 10)
printk(KERN_ERR "FAULT[%s:%d]: 32-bit process "
"reports 64-bit fault address [%lx]\n",
current->comm, current->pid, addr);
show_regs(regs);
}
asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
{
struct mm_struct *mm = current->mm;
......@@ -244,6 +269,19 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
(fault_code & FAULT_CODE_DTLB))
BUG();
if (test_thread_flag(TIF_32BIT)) {
if (!(regs->tstate & TSTATE_PRIV)) {
if (unlikely((regs->tpc >> 32) != 0)) {
bogus_32bit_fault_tpc(regs);
goto intr_or_no_mm;
}
}
if (unlikely((address >> 32) != 0)) {
bogus_32bit_fault_address(regs, address);
goto intr_or_no_mm;
}
}
if (regs->tstate & TSTATE_PRIV) {
unsigned long tpc = regs->tpc;
......@@ -264,12 +302,6 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
if (in_atomic() || !mm)
goto intr_or_no_mm;
if (test_thread_flag(TIF_32BIT)) {
if (!(regs->tstate & TSTATE_PRIV))
regs->tpc &= 0xffffffff;
address &= 0xffffffff;
}
if (!down_read_trylock(&mm->mmap_sem)) {
if ((regs->tstate & TSTATE_PRIV) &&
!search_exception_tables(regs->tpc)) {
......
arch/sparc/oprofile/init.c
View file @ 43769f10
This diff is collapsed.
drivers/ata/ahci.c
View file @ 43769f10
......@@ -61,9 +61,14 @@
#define EM_MSG_LED_VALUE_ON 0x00010000
static int ahci_skip_host_reset;
static int ahci_ignore_sss;
module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
static int ahci_enable_alpm(struct ata_port *ap,
enum link_pm policy);
static void ahci_disable_alpm(struct ata_port *ap);
......@@ -2692,8 +2697,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
host->iomap = pcim_iomap_table(pdev);
host->private_data = hpriv;
if (!(hpriv->cap & HOST_CAP_SSS))
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
else
printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
......
drivers/ata/libata-core.c
View file @ 43769f10
This diff is collapsed.
drivers/ata/libata-eh.c
View file @ 43769f10
This diff is collapsed.
drivers/ata/libata-pmp.c
View file @ 43769f10
This diff is collapsed.
drivers/ata/libata-scsi.c
View file @ 43769f10
This diff is collapsed.
drivers/ata/libata.h
View file @ 43769f10
This diff is collapsed.
drivers/ata/pata_qdi.c
View file @ 43769f10
This diff is collapsed.
drivers/ata/sata_mv.c
View file @ 43769f10
This diff is collapsed.
drivers/ata/sata_nv.c
View file @ 43769f10
This diff is collapsed.
drivers/ata/sata_sil.c
View file @ 43769f10
This diff is collapsed.
drivers/char/Kconfig
View file @ 43769f10
This diff is collapsed.
drivers/dca/dca-core.c
View file @ 43769f10
This diff is collapsed.
drivers/ide/qd65xx.c
View file @ 43769f10
This diff is collapsed.
drivers/ide/qd65xx.h
View file @ 43769f10
This diff is collapsed.
drivers/mfd/pcf50633-core.c
View file @ 43769f10
This diff is collapsed.
drivers/misc/sgi-xp/xpnet.c
View file @ 43769f10
This diff is collapsed.
drivers/mtd/maps/sa1100-flash.c
View file @ 43769f10
This diff is collapsed.
drivers/net/arm/etherh.c
View file @ 43769f10
This diff is collapsed.
drivers/net/cassini.c
View file @ 43769f10
This diff is collapsed.
drivers/net/e1000/e1000_main.c
View file @ 43769f10
This diff is collapsed.
drivers/net/ibm_newemac/phy.c
View file @ 43769f10
This diff is collapsed.
drivers/net/pcmcia/pcnet_cs.c
View file @ 43769f10
This diff is collapsed.
drivers/net/qlge/qlge.h
View file @ 43769f10
This diff is collapsed.
drivers/net/qlge/qlge_main.c
View file @ 43769f10
This diff is collapsed.
drivers/net/smc911x.c
View file @ 43769f10
This diff is collapsed.
drivers/net/smsc9420.c
View file @ 43769f10
This diff is collapsed.
drivers/net/sungem.c
View file @ 43769f10
This diff is collapsed.
drivers/net/sungem_phy.c
View file @ 43769f10
This diff is collapsed.
drivers/net/sunqe.c
View file @ 43769f10
This diff is collapsed.
drivers/net/tsi108_eth.c
View file @ 43769f10
This diff is collapsed.
drivers/net/tulip/de2104x.c
View file @ 43769f10
This diff is collapsed.
drivers/net/usb/hso.c
View file @ 43769f10
This diff is collapsed.
fs/configfs/dir.c
View file @ 43769f10
This diff is collapsed.
fs/ocfs2/alloc.c
View file @ 43769f10
This diff is collapsed.
fs/ocfs2/dcache.c
View file @ 43769f10
This diff is collapsed.
fs/ocfs2/dcache.h
View file @ 43769f10
This diff is collapsed.
fs/ocfs2/dlmglue.c
View file @ 43769f10
This diff is collapsed.
fs/ocfs2/ocfs2.h
View file @ 43769f10
This diff is collapsed.
fs/ocfs2/quota_global.c
View file @ 43769f10
This diff is collapsed.
fs/ocfs2/super.c
View file @ 43769f10
This diff is collapsed.
fs/ocfs2/xattr.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/budget.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/debug.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/debug.h
View file @ 43769f10
This diff is collapsed.
fs/ubifs/dir.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/file.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/gc.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/io.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/journal.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/lprops.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/lpt_commit.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/master.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/orphan.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/super.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/tnc.c
View file @ 43769f10
This diff is collapsed.
fs/ubifs/ubifs.h
View file @ 43769f10
This diff is collapsed.
fs/xfs/linux-2.6/xfs_sync.c
View file @ 43769f10
This diff is collapsed.
fs/xfs/xfs_dfrag.c
View file @ 43769f10
This diff is collapsed.
fs/xfs/xfs_log_recover.c
View file @ 43769f10
This diff is collapsed.
include/linux/Kbuild
View file @ 43769f10
This diff is collapsed.
include/linux/ata.h
View file @ 43769f10
This diff is collapsed.
include/linux/if_tunnel.h
View file @ 43769f10
This diff is collapsed.
include/linux/libata.h
View file @ 43769f10
This diff is collapsed.
mm/page-writeback.c
View file @ 43769f10
This diff is collapsed.
net/ipv4/udp.c
View file @ 43769f10
This diff is collapsed.
net/packet/af_packet.c
View file @ 43769f10
This diff is collapsed.
net/sunrpc/Kconfig
View file @ 43769f10
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7