Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a new driver for STM FingerTip touchscreen

 - a new driver for D-Link DIR-685 touch keys

 - updated list of supported devices in xpad driver

 - other assorted updates and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (23 commits)
  MAINTAINERS: update input subsystem patterns
  Input: introduce KEY_ASSISTANT
  Input: xpad - sync supported devices with XBCD
  Input: xpad - sync supported devices with 360Controller
  Input: xen-kbdfront - use string constants from PV protocol
  Input: stmfts - mark all PM functions as __maybe_unused
  Input: add support for the STMicroelectronics FingerTip touchscreen
  Input: add D-Link DIR-685 touchkeys driver
  Input: s3c2410_ts - handle return value of clk_prepare_enable
  Input: axp20x-pek - add wakeup support
  Input: synaptics-rmi4 - use %phN to form F34 configuration ID
  Input: synaptics-rmi4 - change a char type to u8
  Input: sparse-keymap - remove sparse_keymap_free()
  Input: tsc2007 - move header file out of I2C realm
  Input: mms114 - move header file out of I2C realm
  Input: mcs - move header file out of I2C realm
  Input: lm8323 - move header file out of I2C realm
  Input: elantech - force relative mode on a certain module
  Input: elan_i2c - add support for fetching chip type on newer hardware
  Input: elan_i2c - check if device is there before really probing
  ...

Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt

+* D-Link DIR-685 Touchkeys
+
+This is a I2C one-off touchkey controller based on the Cypress Semiconductor
+CY8C214 MCU with some firmware in its internal 8KB flash. The circuit
+board inside the router is named E119921.
+
+The touchkey device node should be placed inside an I2C bus node.
+
+Required properties:
+- compatible: must be "dlink,dir685-touchkeys"
+- reg: the I2C address of the touchkeys
+- interrupts: reference to the interrupt number
+
+Example:
+
+touchkeys@26 {
+	compatible = "dlink,dir685-touchkeys";
+	reg = <0x26>;
+	interrupt-parent = <&gpio0>;
+	interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+};

Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt

+* ST-Microelectronics FingerTip touchscreen controller
+
+The ST-Microelectronics FingerTip device provides a basic touchscreen
+functionality. Along with it the user can enable the touchkey which can work as
+a basic HOME and BACK key for phones.
+
+The driver supports also hovering as an absolute single touch event with x, y, z
+coordinates.
+
+Required properties:
+- compatible		: must be "st,stmfts"
+- reg			: I2C slave address, (e.g. 0x49)
+- interrupt-parent	: the phandle to the interrupt controller which provides
+			  the interrupt
+- interrupts		: interrupt specification
+- avdd-supply		: analogic power supply
+- vdd-supply		: power supply
+- touchscreen-size-x	: see touchscreen.txt
+- touchscreen-size-y	: see touchscreen.txt
+
+Optional properties:
+- touch-key-connected	: specifies whether the touchkey feature is connected
+- ledvdd-supply		: power supply to the touch key leds
+
+Example:
+
+i2c@00000000 {
+
+	/* ... */
+
+	touchscreen@49 {
+		compatible = "st,stmfts";
+		reg = <0x49>;
+		interrupt-parent = <&gpa1>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		touchscreen-size-x = <1599>;
+		touchscreen-size-y = <2559>;
+		touch-key-connected;
+		avdd-supply = <&ldo30_reg>;
+		vdd-supply = <&ldo31_reg>;
+		ledvdd-supply = <&ldo33_reg>;
+	};
+};

MAINTAINERS

@@ -3846,6 +3846,12 @@ S:	Supported
 F:	drivers/input/touchscreen/cyttsp*
 F:	include/linux/input/cyttsp.h
 
+D-LINK DIR-685 TOUCHKEYS DRIVER
+M:	Linus Walleij <linus.walleij@linaro.org>
+L:	linux-input@vger.kernel.org
+S:	Supported
+F:	drivers/input/dlink-dir685-touchkeys.c
+
 DALLAS/MAXIM DS1685-FAMILY REAL TIME CLOCK
 M:	Joshua Kinard <kumba@gentoo.org>
 S:	Maintained
@@ -6689,8 +6695,10 @@ S:	Maintained
 F:	drivers/input/
 F:	include/linux/input.h
 F:	include/uapi/linux/input.h
+F:	include/uapi/linux/input-event-codes.h
 F:	include/linux/input/
 F:	Documentation/devicetree/bindings/input/
+F:	Documentation/input/
 
 INPUT MULTITOUCH (MT) PROTOCOL
 M:	Henrik Rydberg <rydberg@bitmath.org>

arch/sh/boards/mach-ecovec24/setup.c

@@ -24,7 +24,7 @@
 #include <linux/usb/r8a66597.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
+#include <linux/platform_data/tsc2007.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/sh_msiof.h>
 #include <linux/spi/mmc_spi.h>

drivers/input/input.c

@@ -481,7 +481,7 @@ EXPORT_SYMBOL(input_inject_event);
 void input_alloc_absinfo(struct input_dev *dev)
 {
 	if (!dev->absinfo)
-		dev->absinfo = kcalloc(ABS_CNT, sizeof(struct input_absinfo),
+		dev->absinfo = kcalloc(ABS_CNT, sizeof(*dev->absinfo),
 					GFP_KERNEL);
 
 	WARN(!dev->absinfo, "%s(): kcalloc() failed?\n", __func__);
@@ -1126,7 +1126,7 @@ static void input_seq_print_bitmap(struct seq_file *seq, const char *name,
 	 * If no output was produced print a single 0.
 	 */
 	if (skip_empty)
-		seq_puts(seq, "0");
+		seq_putc(seq, '0');
 
 	seq_putc(seq, '\n');
 }
@@ -1144,7 +1144,7 @@ static int input_devices_seq_show(struct seq_file *seq, void *v)
 	seq_printf(seq, "P: Phys=%s\n", dev->phys ? dev->phys : "");
 	seq_printf(seq, "S: Sysfs=%s\n", path ? path : "");
 	seq_printf(seq, "U: Uniq=%s\n", dev->uniq ? dev->uniq : "");
-	seq_printf(seq, "H: Handlers=");
+	seq_puts(seq, "H: Handlers=");
 
 	list_for_each_entry(handle, &dev->h_list, d_node)
 		seq_printf(seq, "%s ", handle->name);
@@ -1783,7 +1783,7 @@ struct input_dev *input_allocate_device(void)
 	static atomic_t input_no = ATOMIC_INIT(-1);
 	struct input_dev *dev;
 
-	dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL);
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (dev) {
 		dev->dev.type = &input_dev_type;
 		dev->dev.class = &input_class;
@@ -1849,7 +1849,7 @@ struct input_dev *devm_input_allocate_device(struct device *dev)
 	struct input_devres *devres;
 
 	devres = devres_alloc(devm_input_device_release,
-			      sizeof(struct input_devres), GFP_KERNEL);
+			      sizeof(*devres), GFP_KERNEL);
 	if (!devres)
 		return NULL;
 
@@ -2099,7 +2099,7 @@ int input_register_device(struct input_dev *dev)
 
 	if (dev->devres_managed) {
 		devres = devres_alloc(devm_input_device_unregister,
-				      sizeof(struct input_devres), GFP_KERNEL);
+				      sizeof(*devres), GFP_KERNEL);
 		if (!devres)
 			return -ENOMEM;
 

drivers/input/keyboard/Kconfig

@@ -178,6 +178,17 @@ config KEYBOARD_CLPS711X
 	  To compile this driver as a module, choose M here: the
 	  module will be called clps711x-keypad.
 
+config KEYBOARD_DLINK_DIR685
+	tristate "D-Link DIR-685 touchkeys support"
+	depends on I2C
+	default ARCH_GEMINI
+	help
+	  If you say yes here you get support for the D-Link DIR-685
+	  touchkeys.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dlink-dir685-touchkeys.
+
 config KEYBOARD_LKKBD
 	tristate "DECstation/VAXstation LK201/LK401 keyboard"
 	select SERIO

drivers/input/keyboard/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
 obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
+obj-$(CONFIG_KEYBOARD_DLINK_DIR685)	+= dlink-dir685-touchkeys.o
 obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
 obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS)	+= goldfish_events.o
 obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o

drivers/input/keyboard/dlink-dir685-touchkeys.c

+/*
+ * D-Link DIR-685 router I2C-based Touchkeys input driver
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This is a one-off touchkey controller based on the Cypress Semiconductor
+ * CY8C214 MCU with some firmware in its internal 8KB flash. The circuit
+ * board inside the router is named E119921
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+
+struct dir685_touchkeys {
+	struct device		*dev;
+	struct i2c_client	*client;
+	struct input_dev	*input;
+	unsigned long		cur_key;
+	u16			codes[7];
+};
+
+static irqreturn_t dir685_tk_irq_thread(int irq, void *data)
+{
+	struct dir685_touchkeys *tk = data;
+	const int num_bits = min_t(int, ARRAY_SIZE(tk->codes), 16);
+	unsigned long changed;
+	u8 buf[6];
+	unsigned long key;
+	int i;
+	int err;
+
+	memset(buf, 0, sizeof(buf));
+	err = i2c_master_recv(tk->client, buf, sizeof(buf));
+	if (err != sizeof(buf)) {
+		dev_err(tk->dev, "short read %d\n", err);
+		return IRQ_HANDLED;
+	}
+
+	dev_dbg(tk->dev, "IN: %*ph\n", (int)sizeof(buf), buf);
+	key = be16_to_cpup((__be16 *) &buf[4]);
+
+	/* Figure out if any bits went high or low since last message */
+	changed = tk->cur_key ^ key;
+	for_each_set_bit(i, &changed, num_bits) {
+		dev_dbg(tk->dev, "key %d is %s\n", i,
+			test_bit(i, &key) ? "down" : "up");
+		input_report_key(tk->input, tk->codes[i], test_bit(i, &key));
+	}
+
+	/* Store currently down keys */
+	tk->cur_key = key;
+	input_sync(tk->input);
+
+	return IRQ_HANDLED;
+}
+
+static int dir685_tk_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct dir685_touchkeys *tk;
+	struct device *dev = &client->dev;
+	u8 bl_data[] = { 0xa7, 0x40 };
+	int err;
+	int i;
+
+	tk = devm_kzalloc(&client->dev, sizeof(*tk), GFP_KERNEL);
+	if (!tk)
+		return -ENOMEM;
+
+	tk->input = devm_input_allocate_device(dev);
+	if (!tk->input)
+		return -ENOMEM;
+
+	tk->client = client;
+	tk->dev = dev;
+
+	tk->input->keycodesize = sizeof(u16);
+	tk->input->keycodemax = ARRAY_SIZE(tk->codes);
+	tk->input->keycode = tk->codes;
+	tk->codes[0] = KEY_UP;
+	tk->codes[1] = KEY_DOWN;
+	tk->codes[2] = KEY_LEFT;
+	tk->codes[3] = KEY_RIGHT;
+	tk->codes[4] = KEY_ENTER;
+	tk->codes[5] = KEY_WPS_BUTTON;
+	/*
+	 * This key appears in the vendor driver, but I have
+	 * not been able to activate it.
+	 */
+	tk->codes[6] = KEY_RESERVED;
+
+	__set_bit(EV_KEY, tk->input->evbit);
+	for (i = 0; i < ARRAY_SIZE(tk->codes); i++)
+		__set_bit(tk->codes[i], tk->input->keybit);
+	__clear_bit(KEY_RESERVED, tk->input->keybit);
+
+	tk->input->name = "D-Link DIR-685 touchkeys";
+	tk->input->id.bustype = BUS_I2C;
+
+	err = input_register_device(tk->input);
+	if (err)
+		return err;
+
+	/* Set the brightness to max level */
+	err = i2c_master_send(client, bl_data, sizeof(bl_data));
+	if (err != sizeof(bl_data))
+		dev_warn(tk->dev, "error setting brightness level\n");
+
+	if (!client->irq) {
+		dev_err(dev, "no IRQ on the I2C device\n");
+		return -ENODEV;
+	}
+	err = devm_request_threaded_irq(dev, client->irq,
+					NULL, dir685_tk_irq_thread,
+					IRQF_ONESHOT,
+					"dir685-tk", tk);
+	if (err) {
+		dev_err(dev, "can't request IRQ\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id dir685_tk_id[] = {
+	{ "dir685tk", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, dir685_tk_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id dir685_tk_of_match[] = {
+	{ .compatible = "dlink,dir685-touchkeys" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dir685_tk_of_match);
+#endif
+
+static struct i2c_driver dir685_tk_i2c_driver = {
+	.driver = {
+		.name	= "dlin-dir685-touchkeys",
+		.of_match_table = of_match_ptr(dir685_tk_of_match),
+	},
+	.probe		= dir685_tk_probe,
+	.id_table	= dir685_tk_id,
+};
+module_i2c_driver(dir685_tk_i2c_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("D-Link DIR-685 touchkeys driver");
+MODULE_LICENSE("GPL");

drivers/input/keyboard/lm8323.c

@@ -30,8 +30,8 @@
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/leds.h>
+#include <linux/platform_data/lm8323.h>
 #include <linux/pm.h>
-#include <linux/i2c/lm8323.h>
 #include <linux/slab.h>
 
 /* Commands to send to the chip. */

drivers/input/keyboard/mcs_touchkey.c

@@ -13,11 +13,11 @@
 
 #include <linux/module.h>
 #include <linux/i2c.h>
-#include <linux/i2c/mcs.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/irq.h>
 #include <linux/slab.h>
+#include <linux/platform_data/mcs.h>
 #include <linux/pm.h>
 
 /* MCS5000 Touchkey */

drivers/input/misc/axp20x-pek.c

@@ -253,6 +253,9 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek,
 		return error;
 	}
 
+	if (axp20x_pek->axp20x->variant == AXP288_ID)
+		enable_irq_wake(axp20x_pek->irq_dbr);
+
 	return 0;
 }
 
@@ -331,10 +334,35 @@ static int axp20x_pek_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused axp20x_pek_resume_noirq(struct device *dev)
+{
+	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+
+	if (axp20x_pek->axp20x->variant != AXP288_ID)
+		return 0;
+
+	/*
+	 * Clear interrupts from button presses during suspend, to avoid
+	 * a wakeup power-button press getting reported to userspace.
+	 */
+	regmap_write(axp20x_pek->axp20x->regmap,
+		     AXP20X_IRQ1_STATE + AXP288_IRQ_POKN / 8,
+		     BIT(AXP288_IRQ_POKN % 8));
+
+	return 0;
+}
+
+static const struct dev_pm_ops axp20x_pek_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+	.resume_noirq = axp20x_pek_resume_noirq,
+#endif
+};
+
 static struct platform_driver axp20x_pek_driver = {
 	.probe		= axp20x_pek_probe,
 	.driver		= {
 		.name		= "axp20x-pek",
+		.pm		= &axp20x_pek_pm_ops,
 	},
 };
 module_platform_driver(axp20x_pek_driver);

drivers/input/misc/xen-kbdfront.c

@@ -135,14 +135,17 @@ static int xenkbd_probe(struct xenbus_device *dev,
 		goto error_nomem;
 
 	/* Set input abs params to match backend screen res */
-	abs = xenbus_read_unsigned(dev->otherend, "feature-abs-pointer", 0);
-	ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend, "width",
+	abs = xenbus_read_unsigned(dev->otherend,
+				   XENKBD_FIELD_FEAT_ABS_POINTER, 0);
+	ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
+						  XENKBD_FIELD_WIDTH,
 						  ptr_size[KPARAM_X]);
-	ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend, "height",
+	ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
+						  XENKBD_FIELD_HEIGHT,
 						  ptr_size[KPARAM_Y]);
 	if (abs) {
 		ret = xenbus_write(XBT_NIL, dev->nodename,
-				   "request-abs-pointer", "1");
+				   XENKBD_FIELD_REQ_ABS_POINTER, "1");
 		if (ret) {
 			pr_warn("xenkbd: can't request abs-pointer\n");
 			abs = 0;
@@ -271,14 +274,15 @@ static int xenkbd_connect_backend(struct xenbus_device *dev,
 		xenbus_dev_fatal(dev, ret, "starting transaction");
 		goto error_irqh;
 	}
-	ret = xenbus_printf(xbt, dev->nodename, "page-ref", "%lu",
+	ret = xenbus_printf(xbt, dev->nodename, XENKBD_FIELD_RING_REF, "%lu",
 			    virt_to_gfn(info->page));
 	if (ret)
 		goto error_xenbus;
-	ret = xenbus_printf(xbt, dev->nodename, "page-gref", "%u", info->gref);
+	ret = xenbus_printf(xbt, dev->nodename, XENKBD_FIELD_RING_GREF,
+			    "%u", info->gref);
 	if (ret)
 		goto error_xenbus;
-	ret = xenbus_printf(xbt, dev->nodename, "event-channel", "%u",
+	ret = xenbus_printf(xbt, dev->nodename, XENKBD_FIELD_EVT_CHANNEL, "%u",
 			    evtchn);
 	if (ret)
 		goto error_xenbus;
@@ -353,7 +357,7 @@ static void xenkbd_backend_changed(struct xenbus_device *dev,
 }
 
 static const struct xenbus_device_id xenkbd_ids[] = {
-	{ "vkbd" },
+	{ XENKBD_DRIVER_NAME },
 	{ "" }
 };
 
@@ -390,4 +394,4 @@ module_exit(xenkbd_cleanup);
 
 MODULE_DESCRIPTION("Xen virtual keyboard/pointer device frontend");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("xen:vkbd");
+MODULE_ALIAS("xen:" XENKBD_DRIVER_NAME);

drivers/input/mouse/elan_i2c.h

@@ -58,7 +58,7 @@ struct elan_transport_ops {
 
 	int (*get_version)(struct i2c_client *client, bool iap, u8 *version);
 	int (*get_sm_version)(struct i2c_client *client,
-			      u8* ic_type, u8 *version);
+			      u16 *ic_type, u8 *version);
 	int (*get_checksum)(struct i2c_client *client, bool iap, u16 *csum);
 	int (*get_product_id)(struct i2c_client *client, u16 *id);
 
@@ -82,6 +82,7 @@ struct elan_transport_ops {
 	int (*get_report)(struct i2c_client *client, u8 *report);
 	int (*get_pressure_adjustment)(struct i2c_client *client,
 				       int *adjustment);
+	int (*get_pattern)(struct i2c_client *client, u8 *pattern);
 };
 
 extern const struct elan_transport_ops elan_smbus_ops, elan_i2c_ops;

drivers/input/mouse/elan_i2c_core.c

@@ -5,7 +5,7 @@
  *
  * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
  * Author: KT Liao <kt.liao@emc.com.tw>
- * Version: 1.6.2
+ * Version: 1.6.3
  *
  * Based on cyapa driver:
  * copyright (c) 2011-2012 Cypress Semiconductor, Inc.
@@ -41,7 +41,7 @@
 #include "elan_i2c.h"
 
 #define DRIVER_NAME		"elan_i2c"
-#define ELAN_DRIVER_VERSION	"1.6.2"
+#define ELAN_DRIVER_VERSION	"1.6.3"
 #define ELAN_VENDOR_ID		0x04f3
 #define ETP_MAX_PRESSURE	255
 #define ETP_FWIDTH_REDUCE	90
@@ -78,6 +78,7 @@ struct elan_tp_data {
 	unsigned int		x_res;
 	unsigned int		y_res;
 
+	u8			pattern;
 	u16			product_id;
 	u8			fw_version;
 	u8			sm_version;
@@ -85,7 +86,7 @@ struct elan_tp_data {
 	u16			fw_checksum;
 	int			pressure_adjustment;
 	u8			mode;
-	u8			ic_type;
+	u16			ic_type;
 	u16			fw_validpage_count;
 	u16			fw_signature_address;
 
@@ -96,10 +97,10 @@ struct elan_tp_data {
 	bool			baseline_ready;
 };
 
-static int elan_get_fwinfo(u8 iap_version, u16 *validpage_count,
+static int elan_get_fwinfo(u16 ic_type, u16 *validpage_count,
 			   u16 *signature_address)
 {
-	switch (iap_version) {
+	switch (ic_type) {
 	case 0x00:
 	case 0x06:
 	case 0x08:
@@ -119,6 +120,9 @@ static int elan_get_fwinfo(u8 iap_version, u16 *validpage_count,
 	case 0x0E:
 		*validpage_count = 640;
 		break;
+	case 0x10:
+		*validpage_count = 1024;
+		break;
 	default:
 		/* unknown ic type clear value */
 		*validpage_count = 0;
@@ -305,6 +309,7 @@ static int elan_initialize(struct elan_tp_data *data)
 static int elan_query_device_info(struct elan_tp_data *data)
 {
 	int error;
+	u16 ic_type;
 
 	error = data->ops->get_version(data->client, false, &data->fw_version);
 	if (error)
@@ -324,7 +329,16 @@ static int elan_query_device_info(struct elan_tp_data *data)
 	if (error)
 		return error;
 
-	error = elan_get_fwinfo(data->iap_version, &data->fw_validpage_count,
+	error = data->ops->get_pattern(data->client, &data->pattern);
+	if (error)
+		return error;
+
+	if (data->pattern == 0x01)
+		ic_type = data->ic_type;
+	else
+		ic_type = data->iap_version;
+
+	error = elan_get_fwinfo(ic_type, &data->fw_validpage_count,
 				&data->fw_signature_address);
 	if (error)
 		dev_warn(&data->client->dev,
@@ -1077,6 +1091,13 @@ static int elan_probe(struct i2c_client *client,
 		return error;
 	}
 
+	/* Make sure there is something at this address */
+	error = i2c_smbus_read_byte(client);
+	if (error < 0) {
+		dev_dbg(&client->dev, "nothing at this address: %d\n", error);
+		return -ENXIO;
+	}
+
 	/* Initialize the touchpad. */
 	error = elan_initialize(data);
 	if (error)
@@ -1101,10 +1122,13 @@ static int elan_probe(struct i2c_client *client,
 		"Elan Touchpad Extra Information:\n"
 		"    Max ABS X,Y:   %d,%d\n"
 		"    Width X,Y:   %d,%d\n"
-		"    Resolution X,Y:   %d,%d (dots/mm)\n",
+		"    Resolution X,Y:   %d,%d (dots/mm)\n"
+		"    ic type: 0x%x\n"
+		"    info pattern: 0x%x\n",
 		data->max_x, data->max_y,
 		data->width_x, data->width_y,
-		data->x_res, data->y_res);
+		data->x_res, data->y_res,
+		data->ic_type, data->pattern);
 
 	/* Set up input device properties based on queried parameters. */
 	error = elan_setup_input_device(data);

drivers/input/mouse/elan_i2c_i2c.c

@@ -34,9 +34,12 @@
 #define ETP_I2C_DESC_CMD		0x0001
 #define ETP_I2C_REPORT_DESC_CMD		0x0002
 #define ETP_I2C_STAND_CMD		0x0005
+#define ETP_I2C_PATTERN_CMD		0x0100
 #define ETP_I2C_UNIQUEID_CMD		0x0101
 #define ETP_I2C_FW_VERSION_CMD		0x0102
-#define ETP_I2C_SM_VERSION_CMD		0x0103
+#define ETP_I2C_IC_TYPE_CMD		0x0103
+#define ETP_I2C_OSM_VERSION_CMD		0x0103
+#define ETP_I2C_NSM_VERSION_CMD		0x0104
 #define ETP_I2C_XY_TRACENUM_CMD		0x0105
 #define ETP_I2C_MAX_X_AXIS_CMD		0x0106
 #define ETP_I2C_MAX_Y_AXIS_CMD		0x0107
@@ -239,12 +242,34 @@ static int elan_i2c_get_baseline_data(struct i2c_client *client,
 	return 0;
 }
 
+static int elan_i2c_get_pattern(struct i2c_client *client, u8 *pattern)
+{
+	int error;
+	u8 val[3];
+
+	error = elan_i2c_read_cmd(client, ETP_I2C_PATTERN_CMD, val);
+	if (error) {
+		dev_err(&client->dev, "failed to get pattern: %d\n", error);
+		return error;
+	}
+	*pattern = val[1];
+
+	return 0;
+}
+
 static int elan_i2c_get_version(struct i2c_client *client,
 				bool iap, u8 *version)
 {
 	int error;
+	u8 pattern_ver;
 	u8 val[3];
 
+	error = elan_i2c_get_pattern(client, &pattern_ver);
+	if (error) {
+		dev_err(&client->dev, "failed to get pattern version\n");
+		return error;
+	}
+
 	error = elan_i2c_read_cmd(client,
 				  iap ? ETP_I2C_IAP_VERSION_CMD :
 					ETP_I2C_FW_VERSION_CMD,
@@ -255,24 +280,54 @@ static int elan_i2c_get_version(struct i2c_client *client,
 		return error;
 	}
 
-	*version = val[0];
+	if (pattern_ver == 0x01)
+		*version = iap ? val[1] : val[0];
+	else
+		*version = val[0];
 	return 0;
 }
 
 static int elan_i2c_get_sm_version(struct i2c_client *client,
-				   u8 *ic_type, u8 *version)
+				   u16 *ic_type, u8 *version)
 {
 	int error;
+	u8 pattern_ver;
 	u8 val[3];
 
-	error = elan_i2c_read_cmd(client, ETP_I2C_SM_VERSION_CMD, val);
+	error = elan_i2c_get_pattern(client, &pattern_ver);
 	if (error) {
-		dev_err(&client->dev, "failed to get SM version: %d\n", error);
+		dev_err(&client->dev, "failed to get pattern version\n");
 		return error;
 	}
 
-	*version = val[0];
-	*ic_type = val[1];
+	if (pattern_ver == 0x01) {
+		error = elan_i2c_read_cmd(client, ETP_I2C_IC_TYPE_CMD, val);
+		if (error) {
+			dev_err(&client->dev, "failed to get ic type: %d\n",
+				error);
+			return error;
+		}
+		*ic_type = be16_to_cpup((__be16 *)val);
+
+		error = elan_i2c_read_cmd(client, ETP_I2C_NSM_VERSION_CMD,
+					  val);
+		if (error) {
+			dev_err(&client->dev, "failed to get SM version: %d\n",
+				error);
+			return error;
+		}
+		*version = val[1];
+	} else {
+		error = elan_i2c_read_cmd(client, ETP_I2C_OSM_VERSION_CMD, val);
+		if (error) {
+			dev_err(&client->dev, "failed to get SM version: %d\n",
+				error);
+			return error;
+		}
+		*version = val[0];
+		*ic_type = val[1];
+	}
+
 	return 0;
 }
 
@@ -641,5 +696,7 @@ const struct elan_transport_ops elan_i2c_ops = {
 	.write_fw_block		= elan_i2c_write_fw_block,
 	.finish_fw_update	= elan_i2c_finish_fw_update,
 
+	.get_pattern		= elan_i2c_get_pattern,
+
 	.get_report		= elan_i2c_get_report,
 };

drivers/input/mouse/elan_i2c_smbus.c

@@ -166,7 +166,7 @@ static int elan_smbus_get_version(struct i2c_client *client,
 }
 
 static int elan_smbus_get_sm_version(struct i2c_client *client,
-				     u8 *ic_type, u8 *version)
+				     u16 *ic_type, u8 *version)
 {
 	int error;
 	u8 val[3];
@@ -495,6 +495,12 @@ static int elan_smbus_finish_fw_update(struct i2c_client *client,
 	return 0;
 }
 
+static int elan_smbus_get_pattern(struct i2c_client *client, u8 *pattern)
+{
+	*pattern = 0;
+	return 0;
+}
+
 const struct elan_transport_ops elan_smbus_ops = {
 	.initialize		= elan_smbus_initialize,
 	.sleep_control		= elan_smbus_sleep_control,
@@ -524,4 +530,5 @@ const struct elan_transport_ops elan_smbus_ops = {
 	.finish_fw_update	= elan_smbus_finish_fw_update,
 
 	.get_report		= elan_smbus_get_report,
+	.get_pattern		= elan_smbus_get_pattern,
 };

drivers/input/mouse/elantech.c

@@ -1711,6 +1711,17 @@ int elantech_init(struct psmouse *psmouse)
 			     etd->samples[0], etd->samples[1], etd->samples[2]);
 	}
 
+	if (etd->samples[1] == 0x74 && etd->hw_version == 0x03) {
+		/*
+		 * This module has a bug which makes absolute mode
+		 * unusable, so let's abort so we'll be using standard
+		 * PS/2 protocol.
+		 */
+		psmouse_info(psmouse,
+			     "absolute mode broken, forcing standard PS/2 protocol\n");
+		goto init_fail;
+	}
+
 	if (elantech_set_absolute_mode(psmouse)) {
 		psmouse_err(psmouse,
 			    "failed to put touchpad into absolute mode.\n");

drivers/input/rmi4/rmi_f34v7.c

@@ -9,13 +9,14 @@
  * the Free Software Foundation.
  */
 
+#include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/rmi.h>
 #include <linux/firmware.h>
-#include <asm/unaligned.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
+#include <asm/unaligned.h>
 
 #include "rmi_driver.h"
 #include "rmi_f34.h"
@@ -464,7 +465,7 @@ static int rmi_f34v7_read_queries_bl_version(struct f34_data *f34)
 static int rmi_f34v7_read_queries(struct f34_data *f34)
 {
 	int ret;
-	int i, j;
+	int i;
 	u8 base;
 	int offset;
 	u8 *ptable;
@@ -518,10 +519,7 @@ static int rmi_f34v7_read_queries(struct f34_data *f34)
 			query_1_7.partition_support[1] & HAS_GUEST_CODE;
 
 	if (query_0 & HAS_CONFIG_ID) {
-		char f34_ctrl[CONFIG_ID_SIZE];
-		int i = 0;
-		u8 *p = f34->configuration_id;
-		*p = '\0';
+		u8 f34_ctrl[CONFIG_ID_SIZE];
 
 		ret = rmi_read_block(f34->fn->rmi_dev,
 				f34->fn->fd.control_base_addr,
@@ -531,13 +529,11 @@ static int rmi_f34v7_read_queries(struct f34_data *f34)
 			return ret;
 
 		/* Eat leading zeros */
-		while (i < sizeof(f34_ctrl) && !f34_ctrl[i])
-			i++;
+		for (i = 0; i < sizeof(f34_ctrl) - 1 && !f34_ctrl[i]; i++)
+			/* Empty */;
 
-		for (; i < sizeof(f34_ctrl); i++)
-			p += snprintf(p, f34->configuration_id
-				      + sizeof(f34->configuration_id) - p,
-				      "%02X", f34_ctrl[i]);
+		snprintf(f34->configuration_id, sizeof(f34->configuration_id),
+			 "%*phN", (int)sizeof(f34_ctrl) - i, f34_ctrl + i);
 
 		rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "Configuration ID: %s\n",
 			f34->configuration_id);
@@ -545,9 +541,7 @@ static int rmi_f34v7_read_queries(struct f34_data *f34)
 
 	f34->v7.partitions = 0;
 	for (i = 0; i < sizeof(query_1_7.partition_support); i++)
-		for (j = 0; j < 8; j++)
-			if (query_1_7.partition_support[i] & (1 << j))
-				f34->v7.partitions++;
+		f34->v7.partitions += hweight8(query_1_7.partition_support[i]);
 
 	rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "%s: Supported partitions: %*ph\n",
 		__func__, sizeof(query_1_7.partition_support),

drivers/input/sparse-keymap.c

@@ -223,20 +223,6 @@ int sparse_keymap_setup(struct input_dev *dev,
 }
 EXPORT_SYMBOL(sparse_keymap_setup);
 
-/**
- * sparse_keymap_free - free memory allocated for sparse keymap
- * @dev: Input device using sparse keymap
- *
- * This function used to free memory allocated by sparse keymap
- * in an input device that was set up by sparse_keymap_setup().
- * Since sparse_keymap_setup() now uses a managed allocation for the
- * keymap copy, use of this function is deprecated.
- */
-void sparse_keymap_free(struct input_dev *dev)
-{
-}
-EXPORT_SYMBOL(sparse_keymap_free);
-
 /**
  * sparse_keymap_report_entry - report event corresponding to given key entry
  * @dev: Input device for which event should be reported

drivers/input/touchscreen/Kconfig

@@ -1114,6 +1114,17 @@ config TOUCHSCREEN_ST1232
 	  To compile this driver as a module, choose M here: the
 	  module will be called st1232_ts.
 
+config TOUCHSCREEN_STMFTS
+	tristate "STMicroelectronics STMFTS touchscreen"
+	depends on I2C
+	depends on LEDS_CLASS
+	help
+	  Say Y here if you want support for STMicroelectronics
+	  STMFTS touchscreen.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stmfts.
+
 config TOUCHSCREEN_STMPE
 	tristate "STMicroelectronics STMPE touchscreens"
 	depends on MFD_STMPE

drivers/input/touchscreen/Makefile

@@ -67,6 +67,7 @@ obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
 obj-$(CONFIG_TOUCHSCREEN_SILEAD)	+= silead.o
 obj-$(CONFIG_TOUCHSCREEN_SIS_I2C)	+= sis_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
+obj-$(CONFIG_TOUCHSCREEN_STMFTS)	+= stmfts.o
 obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
 obj-$(CONFIG_TOUCHSCREEN_SUN4I)		+= sun4i-ts.o
 obj-$(CONFIG_TOUCHSCREEN_SUR40)		+= sur40.o

drivers/input/touchscreen/mcs5000_ts.c

@@ -15,10 +15,10 @@
 
 #include <linux/module.h>
 #include <linux/i2c.h>
-#include <linux/i2c/mcs.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/irq.h>
+#include <linux/platform_data/mcs.h>
 #include <linux/slab.h>
 
 /* Registers */

drivers/input/touchscreen/mms114.c

@@ -11,9 +11,9 @@
 #include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/i2c.h>
-#include <linux/i2c/mms114.h>
 #include <linux/input/mt.h>
 #include <linux/interrupt.h>
+#include <linux/platform_data/mms114.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 

drivers/input/touchscreen/s3c2410_ts.c

@@ -264,7 +264,11 @@ static int s3c2410ts_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	clk_prepare_enable(ts.clock);
+	ret = clk_prepare_enable(ts.clock);
+	if (ret) {
+		dev_err(dev, "Failed! to enabled clocks\n");
+		goto err_clk_get;
+	}
 	dev_dbg(dev, "got and enabled clocks\n");
 
 	ts.irq_tc = ret = platform_get_irq(pdev, 0);
@@ -353,7 +357,9 @@ static int s3c2410ts_probe(struct platform_device *pdev)
  err_iomap:
 	iounmap(ts.io);
  err_clk:
+	clk_disable_unprepare(ts.clock);
 	del_timer_sync(&touch_timer);
+ err_clk_get:
 	clk_put(ts.clock);
 	return ret;
 }

drivers/input/touchscreen/tsc2007_core.c

@@ -25,9 +25,9 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
+#include <linux/platform_data/tsc2007.h>
 #include "tsc2007.h"
 
 int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)

drivers/mfd/timberdale.c

@@ -32,13 +32,13 @@
 #include <linux/i2c.h>
 #include <linux/i2c-ocores.h>
 #include <linux/i2c-xiic.h>
-#include <linux/i2c/tsc2007.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/xilinx_spi.h>
 #include <linux/spi/max7301.h>
 #include <linux/spi/mc33880.h>
 
+#include <linux/platform_data/tsc2007.h>
 #include <linux/platform_data/media/timb_radio.h>
 #include <linux/platform_data/media/timb_video.h>
 

include/linux/input/sparse-keymap.h

@@ -51,7 +51,6 @@ struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev,
 int sparse_keymap_setup(struct input_dev *dev,
 			const struct key_entry *keymap,
 			int (*setup)(struct input_dev *, struct key_entry *));
-void sparse_keymap_free(struct input_dev *dev);
 
 void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *ke,
 				unsigned int value, bool autorelease);

include/linux/i2c/tsc2007.h → include/linux/platform_data/tsc2007.h

 #ifndef __LINUX_I2C_TSC2007_H
 #define __LINUX_I2C_TSC2007_H
 
-/* linux/i2c/tsc2007.h */
+/* linux/platform_data/tsc2007.h */
 
 struct tsc2007_platform_data {
 	u16	model;				/* 2007. */

include/uapi/linux/input-event-codes.h

@@ -600,6 +600,7 @@
 #define KEY_APPSELECT		0x244	/* AL Select Task/Application */
 #define KEY_SCREENSAVER		0x245	/* AL Screen Saver */
 #define KEY_VOICECOMMAND		0x246	/* Listening Voice Command */
+#define KEY_ASSISTANT		0x247	/* AL Context-aware desktop assistant */
 
 #define KEY_BRIGHTNESS_MIN		0x250	/* Set Brightness to Minimum */
 #define KEY_BRIGHTNESS_MAX		0x251	/* Set Brightness to Maximum */